From: Saeed Mahameed <saeedm@mellanox.com>
To: Saeed Mahameed <saeedm@mellanox.com>,
Leon Romanovsky <leonro@mellanox.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-rdma@vger.kernel.org" <linux-rdma@vger.kernel.org>,
Parav Pandit <parav@mellanox.com>, Vu Pham <vuhuong@mellanox.com>
Subject: [PATCH mlx5-next 01/18] net/mlx5: Add hardware definitions for sub functions
Date: Fri, 28 Jun 2019 22:35:48 +0000 [thread overview]
Message-ID: <20190628223516.9368-2-saeedm@mellanox.com> (raw)
In-Reply-To: <20190628223516.9368-1-saeedm@mellanox.com>
From: Parav Pandit <parav@mellanox.com>
Update mlx5 device interface data structures for:
1. New command definitions for allocating, deallocating SF
2. Query SF partition
3. Eswitch SF fields
4. HCA CAP SF fields
5. Extend Eswitch functions command for SF
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
include/linux/mlx5/mlx5_ifc.h | 99 +++++++++++++++++++++++++++++++++--
1 file changed, 96 insertions(+), 3 deletions(-)
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index d4409654f760..db00effaa83a 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -106,6 +106,9 @@ enum {
MLX5_CMD_OP_QUERY_ISSI = 0x10a,
MLX5_CMD_OP_SET_ISSI = 0x10b,
MLX5_CMD_OP_SET_DRIVER_VERSION = 0x10d,
+ MLX5_CMD_OP_QUERY_SF_PARTITION = 0x111,
+ MLX5_CMD_OP_ALLOC_SF = 0x113,
+ MLX5_CMD_OP_DEALLOC_SF = 0x114,
MLX5_CMD_OP_CREATE_MKEY = 0x200,
MLX5_CMD_OP_QUERY_MKEY = 0x201,
MLX5_CMD_OP_DESTROY_MKEY = 0x202,
@@ -713,7 +716,11 @@ struct mlx5_ifc_e_switch_cap_bits {
u8 reserved_2b[0x6];
u8 max_encap_header_size[0xa];
- u8 reserved_40[0x7c0];
+ u8 reserved_at_40[0xb];
+ u8 log_max_esw_sf[0x5];
+ u8 esw_sf_base_id[0x10];
+
+ u8 reserved_at_60[0x7a0];
};
@@ -1330,13 +1337,24 @@ struct mlx5_ifc_cmd_hca_cap_bits {
u8 reserved_at_640[0x10];
u8 num_q_monitor_counters[0x10];
- u8 reserved_at_660[0x40];
+ u8 reserved_at_660[0x20];
+
+ u8 sf[0x1];
+ u8 sf_set_partition[0x1];
+ u8 reserved_at_682[0x1];
+ u8 log_max_sf[0x5];
+ u8 reserved_at_688[0x8];
+ u8 log_min_sf_size[0x8];
+ u8 max_num_sf_partitions[0x8];
u8 uctx_cap[0x20];
u8 reserved_at_6c0[0x4];
u8 flex_parser_id_geneve_tlv_option_0[0x4];
- u8 reserved_at_6c8[0x138];
+ u8 reserved_at_6c8[0x28];
+ u8 sf_base_id[0x10];
+
+ u8 reserved_at_700[0x100];
};
enum mlx5_flow_destination_type {
@@ -9786,6 +9804,81 @@ struct mlx5_ifc_query_esw_functions_out_bits {
struct mlx5_ifc_host_params_context_bits host_params_context;
u8 reserved_at_280[0x180];
+ u8 host_sf_enable[0][0x40];
+};
+
+struct mlx5_ifc_sf_partition_bits {
+ u8 reserved_at_0[0x10];
+ u8 log_num_sf[0x8];
+ u8 log_sf_bar_size[0x8];
+};
+
+struct mlx5_ifc_query_sf_partitions_out_bits {
+ u8 status[0x8];
+ u8 reserved_at_8[0x18];
+
+ u8 syndrome[0x20];
+
+ u8 reserved_at_40[0x18];
+ u8 num_sf_partitions[0x8];
+
+ u8 reserved_at_60[0x20];
+
+ struct mlx5_ifc_sf_partition_bits sf_partition[0];
+};
+
+struct mlx5_ifc_query_sf_partitions_in_bits {
+ u8 opcode[0x10];
+ u8 reserved_at_10[0x10];
+
+ u8 reserved_at_20[0x10];
+ u8 op_mod[0x10];
+
+ u8 reserved_at_40[0x40];
+};
+
+struct mlx5_ifc_dealloc_sf_out_bits {
+ u8 status[0x8];
+ u8 reserved_at_8[0x18];
+
+ u8 syndrome[0x20];
+
+ u8 reserved_at_40[0x40];
+};
+
+struct mlx5_ifc_dealloc_sf_in_bits {
+ u8 opcode[0x10];
+ u8 reserved_at_10[0x10];
+
+ u8 reserved_at_20[0x10];
+ u8 op_mod[0x10];
+
+ u8 reserved_at_40[0x10];
+ u8 function_id[0x10];
+
+ u8 reserved_at_60[0x20];
+};
+
+struct mlx5_ifc_alloc_sf_out_bits {
+ u8 status[0x8];
+ u8 reserved_at_8[0x18];
+
+ u8 syndrome[0x20];
+
+ u8 reserved_at_40[0x40];
+};
+
+struct mlx5_ifc_alloc_sf_in_bits {
+ u8 opcode[0x10];
+ u8 reserved_at_10[0x10];
+
+ u8 reserved_at_20[0x10];
+ u8 op_mod[0x10];
+
+ u8 reserved_at_40[0x10];
+ u8 function_id[0x10];
+
+ u8 reserved_at_60[0x20];
};
#endif /* MLX5_IFC_H */
--
2.21.0
next prev parent reply other threads:[~2019-06-28 22:35 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-28 22:35 [PATCH mlx5-next 00/18] Mellanox, mlx5 E-Switch and low level updates Saeed Mahameed
2019-06-28 22:35 ` Saeed Mahameed [this message]
2019-06-28 22:35 ` [PATCH mlx5-next 02/18] net/mlx5: Added MCQI and MCQS registers' description to ifc Saeed Mahameed
2019-06-28 22:35 ` [PATCH mlx5-next 03/18] net/mlx5: E-Switch, Use vport index when init rep Saeed Mahameed
2019-06-28 22:35 ` [PATCH mlx5-next 04/18] {IB, net}/mlx5: E-Switch, Use index of rep for vport to IB port mapping Saeed Mahameed
2019-06-28 22:35 ` [PATCH mlx5-next 05/18] RDMA/mlx5: Cleanup rep when doing unload Saeed Mahameed
2019-06-28 22:35 ` [PATCH mlx5-next 06/18] net/mlx5: Rename mlx5_pci_dev_type to mlx5_coredev_type Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 07/18] net/mlx5: Move pci status reg access mutex to mlx5_pci_init Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 08/18] net/mlx5: Limit scope of mlx5_get_next_phys_dev() to PCI PF devices Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 09/18] net/mlx5: Don't handle VF func change if host PF is disabled Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 10/18] net/mlx5: Reduce dependency on enabled_vfs counter and num_vfs Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 11/18] net/mlx5: E-Switch, Use correct flags when configuring vlan Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 12/18] net/mlx5: Handle host PF vport mac/guid for ECPF Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 13/18] net/mlx5: E-Switch, Refactor eswitch SR-IOV interface Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 14/18] net/mlx5: E-Switch, Consolidate eswitch function number of VFs Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 15/18] net/mlx5: E-Switch, Reg/unreg function changed event at correct stage Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 16/18] net/mlx5: E-Switch, Use iterator for vlan and min-inline setups Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 17/18] net/mlx5: E-Switch, Consider host PF for inline mode and vlan pop Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 18/18] net/mlx5: E-Switch, Handle UC address change in switchdev mode Saeed Mahameed
2019-07-01 23:46 ` [PATCH mlx5-next 00/18] Mellanox, mlx5 E-Switch and low level updates Saeed Mahameed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190628223516.9368-2-saeedm@mellanox.com \
--to=saeedm@mellanox.com \
--cc=leonro@mellanox.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=parav@mellanox.com \
--cc=vuhuong@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox