From: Saeed Mahameed <saeedm@mellanox.com>
To: Saeed Mahameed <saeedm@mellanox.com>,
Leon Romanovsky <leonro@mellanox.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-rdma@vger.kernel.org" <linux-rdma@vger.kernel.org>,
Shay Agroskin <shayag@mellanox.com>
Subject: [PATCH mlx5-next 02/18] net/mlx5: Added MCQI and MCQS registers' description to ifc
Date: Fri, 28 Jun 2019 22:35:50 +0000 [thread overview]
Message-ID: <20190628223516.9368-3-saeedm@mellanox.com> (raw)
In-Reply-To: <20190628223516.9368-1-saeedm@mellanox.com>
From: Shay Agroskin <shayag@mellanox.com>
Given a fw component index, the MCQI register allows us to query
this component's information (e.g. its version and capabilities).
Given a fw component index, the MCQS register allows us to query the
status of a fw component, including its type and state
(e.g. PRESET/IN_USE).
It can be used to find the index of a component of a specific type, by
sequentially increasing the component index, and querying each time the
type of the returned component.
If max component index is reached, 'last_index_flag' is set by the HCA.
These registers' description was added to query the running and pending
fw version of the HCA.
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
include/linux/mlx5/driver.h | 1 +
include/linux/mlx5/mlx5_ifc.h | 59 +++++++++++++++++++++++++++++++++--
2 files changed, 58 insertions(+), 2 deletions(-)
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 87f77ded78d4..2ff624a91e3d 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -138,6 +138,7 @@ enum {
MLX5_REG_MTPPS = 0x9053,
MLX5_REG_MTPPSE = 0x9054,
MLX5_REG_MPEGC = 0x9056,
+ MLX5_REG_MCQS = 0x9060,
MLX5_REG_MCQI = 0x9061,
MLX5_REG_MCC = 0x9062,
MLX5_REG_MCDA = 0x9063,
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index db00effaa83a..e2a77b5152a8 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -8542,7 +8542,7 @@ struct mlx5_ifc_mcam_access_reg_bits {
u8 mcda[0x1];
u8 mcc[0x1];
u8 mcqi[0x1];
- u8 reserved_at_1f[0x1];
+ u8 mcqs[0x1];
u8 regs_95_to_87[0x9];
u8 mpegc[0x1];
@@ -9034,6 +9034,24 @@ struct mlx5_ifc_mtppse_reg_bits {
u8 reserved_at_40[0x40];
};
+struct mlx5_ifc_mcqs_reg_bits {
+ u8 last_index_flag[0x1];
+ u8 reserved_at_1[0x7];
+ u8 fw_device[0x8];
+ u8 component_index[0x10];
+
+ u8 reserved_at_20[0x10];
+ u8 identifier[0x10];
+
+ u8 reserved_at_40[0x17];
+ u8 component_status[0x5];
+ u8 component_update_state[0x4];
+
+ u8 last_update_state_changer_type[0x4];
+ u8 last_update_state_changer_host_id[0x4];
+ u8 reserved_at_68[0x18];
+};
+
struct mlx5_ifc_mcqi_cap_bits {
u8 supported_info_bitmask[0x20];
@@ -9054,6 +9072,43 @@ struct mlx5_ifc_mcqi_cap_bits {
u8 reserved_at_86[0x1a];
};
+struct mlx5_ifc_mcqi_version_bits {
+ u8 reserved_at_0[0x2];
+ u8 build_time_valid[0x1];
+ u8 user_defined_time_valid[0x1];
+ u8 reserved_at_4[0x14];
+ u8 version_string_length[0x8];
+
+ u8 version[0x20];
+
+ u8 build_time[0x40];
+
+ u8 user_defined_time[0x40];
+
+ u8 build_tool_version[0x20];
+
+ u8 reserved_at_e0[0x20];
+
+ u8 version_string[92][0x8];
+};
+
+struct mlx5_ifc_mcqi_activation_method_bits {
+ u8 pending_server_ac_power_cycle[0x1];
+ u8 pending_server_dc_power_cycle[0x1];
+ u8 pending_server_reboot[0x1];
+ u8 pending_fw_reset[0x1];
+ u8 auto_activate[0x1];
+ u8 all_hosts_sync[0x1];
+ u8 device_hw_reset[0x1];
+ u8 reserved_at_7[0x19];
+};
+
+union mlx5_ifc_mcqi_reg_data_bits {
+ struct mlx5_ifc_mcqi_cap_bits mcqi_caps;
+ struct mlx5_ifc_mcqi_version_bits mcqi_version;
+ struct mlx5_ifc_mcqi_activation_method_bits mcqi_activation_mathod;
+};
+
struct mlx5_ifc_mcqi_reg_bits {
u8 read_pending_component[0x1];
u8 reserved_at_1[0xf];
@@ -9071,7 +9126,7 @@ struct mlx5_ifc_mcqi_reg_bits {
u8 reserved_at_a0[0x10];
u8 data_size[0x10];
- u8 data[0][0x20];
+ union mlx5_ifc_mcqi_reg_data_bits data[0];
};
struct mlx5_ifc_mcc_reg_bits {
--
2.21.0
next prev parent reply other threads:[~2019-06-28 22:35 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-28 22:35 [PATCH mlx5-next 00/18] Mellanox, mlx5 E-Switch and low level updates Saeed Mahameed
2019-06-28 22:35 ` [PATCH mlx5-next 01/18] net/mlx5: Add hardware definitions for sub functions Saeed Mahameed
2019-06-28 22:35 ` Saeed Mahameed [this message]
2019-06-28 22:35 ` [PATCH mlx5-next 03/18] net/mlx5: E-Switch, Use vport index when init rep Saeed Mahameed
2019-06-28 22:35 ` [PATCH mlx5-next 04/18] {IB, net}/mlx5: E-Switch, Use index of rep for vport to IB port mapping Saeed Mahameed
2019-06-28 22:35 ` [PATCH mlx5-next 05/18] RDMA/mlx5: Cleanup rep when doing unload Saeed Mahameed
2019-06-28 22:35 ` [PATCH mlx5-next 06/18] net/mlx5: Rename mlx5_pci_dev_type to mlx5_coredev_type Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 07/18] net/mlx5: Move pci status reg access mutex to mlx5_pci_init Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 08/18] net/mlx5: Limit scope of mlx5_get_next_phys_dev() to PCI PF devices Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 09/18] net/mlx5: Don't handle VF func change if host PF is disabled Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 10/18] net/mlx5: Reduce dependency on enabled_vfs counter and num_vfs Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 11/18] net/mlx5: E-Switch, Use correct flags when configuring vlan Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 12/18] net/mlx5: Handle host PF vport mac/guid for ECPF Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 13/18] net/mlx5: E-Switch, Refactor eswitch SR-IOV interface Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 14/18] net/mlx5: E-Switch, Consolidate eswitch function number of VFs Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 15/18] net/mlx5: E-Switch, Reg/unreg function changed event at correct stage Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 16/18] net/mlx5: E-Switch, Use iterator for vlan and min-inline setups Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 17/18] net/mlx5: E-Switch, Consider host PF for inline mode and vlan pop Saeed Mahameed
2019-06-28 22:36 ` [PATCH mlx5-next 18/18] net/mlx5: E-Switch, Handle UC address change in switchdev mode Saeed Mahameed
2019-07-01 23:46 ` [PATCH mlx5-next 00/18] Mellanox, mlx5 E-Switch and low level updates Saeed Mahameed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190628223516.9368-3-saeedm@mellanox.com \
--to=saeedm@mellanox.com \
--cc=leonro@mellanox.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=shayag@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox