[PATCH v2 22/22] riscv: dts: starfive: jhb100: Add clocks and resets nodes

[Changhuang Liang <changhuang.liang@starfivetech.com>]

Add clocks and resets nodes for JHB100 RISC-V BMC SoC. They contain
sys0crg/sys1crg/sys2crg/per0crg/per1crg/per2crg/per3crg.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jhb100.dtsi | 198 ++++++++++++++++++++++-
 1 file changed, 195 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jhb100.dtsi b/arch/riscv/boot/dts/starfive/jhb100.dtsi
index 4133ba1f45b4..943324b3b2fd 100644
--- a/arch/riscv/boot/dts/starfive/jhb100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jhb100.dtsi
@@ -4,6 +4,8 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/clock/starfive,jhb100-crg.h>
+#include <dt-bindings/reset/starfive,jhb100-crg.h>
 
 / {
 	compatible = "starfive,jhb100";
@@ -268,12 +270,96 @@ pmu {
 			<0x00 0x22 0xFFFFFFFF 0xFFFFFF22 0x00007FF8>;	/* Event ID 34 */
 	};
 
-	clk_uart: clock-25000000 {
-		compatible = "fixed-clock"; /* Initial clock handler for UART */
+	osc: clock-osc {
+		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
+	pll0: clock-pll0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <2400000000>;
+	};
+
+	pll1: clock-pll1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000000>;
+	};
+
+	pll2: clock-pll2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <903168000>;
+	};
+
+	pll4: clock-pll4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100700000>;
+	};
+
+	pll5: clock-pll5 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100700000>;
+	};
+
+	pll6: clock-pll6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <2400000000>;
+	};
+
+	pll7: clock-pll7 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1950000000>;
+	};
+
+	per2_gmac2_rgmii_rx: clock-per2-gmac2-rgmii-rx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	per2_gmac2_rmii_ref: clock-per2-gmac2-rmii-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	per2_gmac3_sgmii_tx: clock-per2-gmac3-sgmii-tx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	per2_gmac3_sgmii_rx: clock-per2-gmac3-sgmii-rx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	per3_gmac0_rmii_rclki: clock-per3-gmac0-rmii-rclki {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	per3_gmac1_sgmii_tx: clock-per3-gmac1-sgmii-tx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	per3_gmac1_sgmii_rx: clock-per3-gmac1-sgmii-rx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&plic>;
@@ -316,8 +402,10 @@ bus_nioc: bus_nioc {
 			uart6: serial@11982000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x0 0x11982000 0x0 0x400>;
-				clocks = <&clk_uart>, <&clk_uart>;
+				clocks = <&per0crg JHB100_PER0CLK_SCLK_UART6>,
+					 <&per0crg JHB100_PER0CLK_APB_UART6>;
 				clock-names = "baudclk", "apb_pclk";
+				resets = <&per0crg JHB100_PER0RST_MAIN_RSTN_UART6>;
 				interrupt-parent = <&intc>;
 				interrupts = <26>;
 				reg-io-width = <4>;
@@ -325,6 +413,110 @@ uart6: serial@11982000 {
 				status = "disabled";
 			};
 
+			per0crg: clock-controller@11a08000 {
+				compatible = "starfive,jhb100-per0crg";
+				reg = <0x0 0x11a08000 0x0 0x1000>;
+				clocks = <&osc>, <&pll6>,
+					 <&sys0crg JHB100_SYS0CLK_BMCPER0_CFG_400>,
+					 <&sys0crg JHB100_SYS0CLK_BMCPER0_CFG_800>,
+					 <&sys0crg JHB100_SYS0CLK_BMCPER0_NCNOC_INIT>,
+					 <&sys2crg JHB100_SYS2CLK_BMCPER0_NCNOC_TARG>;
+				clock-names = "osc", "pll6", "cfg_400",
+					      "cfg_800", "ncnoc_init",
+					      "ncnoc_targ";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			per1crg: clock-controller@11b40000 {
+				compatible = "starfive,jhb100-per1crg";
+				reg = <0x0 0x11b40000 0x0 0x1000>;
+				clocks = <&pll7>,
+					 <&sys0crg JHB100_SYS0CLK_BMCPER1_NCNOC_INIT>,
+					 <&sys0crg JHB100_SYS0CLK_BMCPER1_CFG_800>,
+					 <&sys2crg JHB100_SYS2CLK_BMCPER1_NCNOC_TARG>,
+					 <&sys2crg JHB100_SYS2CLK_BMCPER1_CFG_143>;
+				clock-names = "pll7", "ncnoc_init",
+					      "cfg_800", "ncnoc_targ",
+					      "cfg_143";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			per2crg: clock-controller@11bc0000 {
+				compatible = "starfive,jhb100-per2crg";
+				reg = <0x0 0x11bc0000 0x0 0x1000>;
+				clocks = <&sys0crg JHB100_SYS0CLK_BMCPER2_NCNOC_INIT>,
+					 <&sys0crg JHB100_SYS0CLK_BMCPER2_CFG_400>,
+					 <&sys0crg JHB100_SYS0CLK_BMCPER2_CFG_125>,
+					 <&per2_gmac2_rgmii_rx>,
+					 <&per2_gmac2_rmii_ref>,
+					 <&per2_gmac3_sgmii_tx>,
+					 <&per2_gmac3_sgmii_rx>,
+					 <&osc>;
+				clock-names = "ncnoc_init", "cfg_400", "cfg_125",
+					      "gmac2_rgmii_rx",
+					      "gmac2_rmii_ref",
+					      "gmac3_sgmii_tx",
+					      "gmac3_sgmii_rx",
+					      "osc";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			per3crg: clock-controller@11c40000 {
+				compatible = "starfive,jhb100-per3crg";
+				reg = <0x0 0x11c40000 0x0 0x1000>;
+				clocks = <&sys0crg JHB100_SYS0CLK_BMCPER3_NCNOC_INIT>,
+					 <&sys1crg JHB100_SYS1CLK_BMCPER3_NCNOC_TARG>,
+					 <&sys1crg JHB100_SYS1CLK_BMCPER3_CFG_125>,
+					 <&per3_gmac0_rmii_rclki>,
+					 <&per3_gmac1_sgmii_tx>,
+					 <&per3_gmac1_sgmii_rx>,
+					 <&osc>;
+				clock-names = "ncnoc_init", "ncnoc_targ", "cfg_125",
+					      "gmac0_rmii_rclki",
+					      "gmac1_sgmii_tx",
+					      "gmac1_sgmii_rx",
+					      "osc";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			sys0crg: clock-controller@13000000 {
+				compatible = "starfive,jhb100-sys0crg";
+				reg = <0x0 0x13000000 0x0 0x4000>;
+				clocks = <&osc>, <&pll0>, <&pll1>,
+					 <&pll2>;
+				clock-names = "osc", "pll0", "pll1", "pll2";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			sys1crg: clock-controller@13004000 {
+				compatible = "starfive,jhb100-sys1crg";
+				reg = <0x0 0x13004000 0x0 0x4000>;
+				clocks = <&osc>, <&pll0>, <&pll1>,
+					 <&pll2>, <&pll4>, <&pll5>,
+					 <&sys0crg JHB100_SYS0CLK_NPU_NCNOC_INIT>;
+				clock-names = "osc", "pll0", "pll1", "pll2",
+					      "pll4", "pll5", "npu_ncnoc_init";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			sys2crg: clock-controller@13008000 {
+				compatible = "starfive,jhb100-sys2crg";
+				reg = <0x0 0x13008000 0x0 0x4000>;
+				clocks = <&osc>, <&pll1>,
+					 <&sys0crg JHB100_SYS0CLK_GPU0_NCNOC_INIT>,
+					 <&sys0crg JHB100_SYS0CLK_GPU1_NCNOC_INIT>;
+				clock-names = "osc", "pll1", "gpu0_ncnoc_init",
+					      "gpu1_ncnoc_init";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
 			intc: interrupt-controller@13220000 {
 				compatible = "starfive,jhb100-intc";
 				reg = <0x0 0x13220000 0x0 0x80>;
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv