Linux-RISC-V Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: <Conor.Dooley@microchip.com>
To: <thierry.reding@gmail.com>, <u.kleine-koenig@pengutronix.de>,
	<lee.jones@linaro.org>
Cc: <Daire.McNamara@microchip.com>, <linux-kernel@vger.kernel.org>,
	<linux-pwm@vger.kernel.org>, <linux-riscv@lists.infradead.org>,
	<Conor.Dooley@microchip.com>
Subject: Re: [PATCH v2 0/2] Add support for Microchip's pwm fpga core
Date: Mon, 13 Jun 2022 11:56:07 +0000	[thread overview]
Message-ID: <4593d704-7f7f-83f9-8fce-2e691d8ba580@microchip.com> (raw)
In-Reply-To: <20220613111759.1550578-1-conor.dooley@microchip.com>



On 13/06/2022 12:17, Conor Dooley wrote:
> Hey Uwe,
> Got a v2 for you...
> I added some comments explaining the calculations and a documentation link
> so hopefully things are a bit easier to follow.
> 
> Code wise, I went through and sorted out a bunch of issues that cycling
> through the different periods/duties threw up. Along the way I found
> some other problems - especially with the longer periods which I have
> fixed. I also added a write to the sync register in the apply function,
> which will resolve to a NOP for channels without "shadow registers".
> 
> Other than that, I managed to ditch the mchp_core_pwm_registers struct
> entirely but had to add a short delay before reading back the registers
> in order to compute the duty.
> 
> Thanks,
> Conor.

Ah, damn - forgot to mention the 3 sets of changes to the MAINTAINERS entry
again.. There's a change already in spi-next & another change in my patchset
sent for usb.

> 
> Changes from v1:
> - account for edge "quirk" while inverted
> - block changing enabled channels' period
> - document the hardware/driver limitations
> - rearrange get_state() more logically
> - fix cast sizes in get_state()
> - fix remove() and probe error paths
> - delete mchp_core_pwm_registers
> - simplify .apply() logic
> - don't warn in calculate_base()
> - fix period calculation
> - fix duty cycle calculation
> - add COREPWM prefix to defines
> - add a documentation link
> 
> Conor Dooley (2):
>    pwm: add microchip soft ip corePWM driver
>    MAINTAINERS: add pwm to PolarFire SoC entry
> 
>   MAINTAINERS                      |   1 +
>   drivers/pwm/Kconfig              |  10 +
>   drivers/pwm/Makefile             |   1 +
>   drivers/pwm/pwm-microchip-core.c | 310 +++++++++++++++++++++++++++++++
>   4 files changed, 322 insertions(+)
>   create mode 100644 drivers/pwm/pwm-microchip-core.c
> 
> 
> base-commit: 61114e734ccb804bc12561ab4020745e02c468c2
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

      parent reply	other threads:[~2022-06-13 11:56 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-13 11:17 [PATCH v2 0/2] Add support for Microchip's pwm fpga core Conor Dooley
2022-06-13 11:17 ` [PATCH v2 1/2] pwm: add microchip soft ip corePWM driver Conor Dooley
2022-06-14 10:25   ` kernel test robot
2022-06-14 10:34     ` Conor.Dooley
2022-06-14 12:13       ` Uwe Kleine-König
2022-06-14 12:16         ` Conor.Dooley
2022-06-14 12:34   ` Uwe Kleine-König
2022-06-14 12:38     ` Conor.Dooley
2022-06-15 19:14   ` kernel test robot
2022-06-15 19:20     ` Conor.Dooley
2022-06-13 11:18 ` [PATCH v2 2/2] MAINTAINERS: add pwm to PolarFire SoC entry Conor Dooley
2022-06-13 11:56 ` Conor.Dooley [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4593d704-7f7f-83f9-8fce-2e691d8ba580@microchip.com \
    --to=conor.dooley@microchip.com \
    --cc=Daire.McNamara@microchip.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox