[PATCH 0/3] Add MK808 RK3066 device

[PATCH 0/3] Add MK808 RK3066 device

[=?UTF-8?q?Pawe=C5=82=20Jarosz?=]

This patchset adds support for Rikomagic MK808 v1 device with RK901 wifi.

It is hdmi stick with two usb ports(host and otg), sdmmc, wifi and uart
onboard.

It is RK3066 based.

Paweł Jarosz (3):
  ARM: dts: rockchip: Enable build of rk3066 MK808 dts
  devicetree: Add vendor prefix for Rikomagic
  ARM: dts: rockchip: Add rk3066 MK808 board devicetree description file

 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/rk3066a-mk808.dts                | 184 +++++++++++++++++++++
 3 files changed, 186 insertions(+)
 create mode 100644 arch/arm/boot/dts/rk3066a-mk808.dts

-- 
2.7.4


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 1/3] ARM: dts: rockchip: Enable build of rk3066 MK808 dts

[=?UTF-8?q?Pawe=C5=82=20Jarosz?=]

MK808 is rockchip rk3066 based board made by Rickomagic. It has two usb
ports, sdmmc, wifi and uart onboard.

Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
---
 arch/arm/boot/dts/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index befcd26..f19cc1d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -639,6 +639,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3036-kylin.dtb \
 	rk3066a-bqcurie2.dtb \
 	rk3066a-marsboard.dtb \
+	rk3066a-mk808.dtb \
 	rk3066a-rayeager.dtb \
 	rk3188-radxarock.dtb \
 	rk3228-evb.dtb \
-- 
2.7.4


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 1/3] ARM: dts: rockchip: Enable build of rk3066 MK808 dts

[Heiko Stuebner]

Hi Paweł,

Am Donnerstag, 6. Oktober 2016, 18:22:40 CEST schrieb =?UTF-8?q?
Pawe=C5=82=20Jarosz?=:
> MK808 is rockchip rk3066 based board made by Rickomagic. It has two usb
> ports, sdmmc, wifi and uart onboard.
> 
> Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
> ---
>  arch/arm/boot/dts/Makefile | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index befcd26..f19cc1d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -639,6 +639,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
>  	rk3036-kylin.dtb \
>  	rk3066a-bqcurie2.dtb \
>  	rk3066a-marsboard.dtb \
> +	rk3066a-mk808.dtb \
>  	rk3066a-rayeager.dtb \
>  	rk3188-radxarock.dtb \
>  	rk3228-evb.dtb \

This patch breaks bisectability, as it adds a dtb to the makefile that you only 
add in patch3 which makes builds fail. Please fold your patches 1 and 3 into 
one patch and also add and entry to Documentation/devicetree/bindings/arm/
rockchip.txt for the board.


Heiko

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 1/3] ARM: dts: rockchip: Enable build of rk3066 MK808 dts

[Paweł Jarosz]

Hi Heiko



> This patch breaks bisectability, as it adds a dtb to the makefile that you only
> add in patch3 which makes builds fail. Please fold your patches 1 and 3 into
> one patch and also add and entry to Documentation/devicetree/bindings/arm/
> rockchip.txt for the board.
>
>
> Heiko

Should i squash all patches in one?

I saw now in logs that it's common practise.


Paweł


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 1/3] ARM: dts: rockchip: Enable build of rk3066 MK808 dts

[Heiko Stuebner]

Am Donnerstag, 6. Oktober 2016, 19:05:15 CEST schrieb Paweł Jarosz:
> Hi Heiko
> 
> > This patch breaks bisectability, as it adds a dtb to the makefile that you
> > only add in patch3 which makes builds fail. Please fold your patches 1
> > and 3 into one patch and also add and entry to
> > Documentation/devicetree/bindings/arm/ rockchip.txt for the board.
> > 
> > 
> > Heiko
> 
> Should i squash all patches in one?
> 
> I saw now in logs that it's common practise.

Nope ... vendor-prefix should stay separate, everything else can be in one 
patch.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/3] devicetree: Add vendor prefix for Rikomagic

[=?UTF-8?q?Pawe=C5=82=20Jarosz?=]

Add Rikomagic to vendor-prefixes.txt

Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 69caf14..3edfa08 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -224,6 +224,7 @@ realtek Realtek Semiconductor Corp.
 renesas	Renesas Electronics Corporation
 richtek	Richtek Technology Corporation
 ricoh	Ricoh Co. Ltd.
+rikomagic	Rikomagic
 rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor
 sandisk	Sandisk Corporation
-- 
2.7.4


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 3/3] ARM: dts: rockchip: Add rk3066 MK808 board devicetree description file

[=?UTF-8?q?Pawe=C5=82=20Jarosz?=]

MK808 is a tv stick which has rockchip rk3066 CPU inside, two usb ports
- host and otg, micro sd card slot and onboard wifi RK901.

Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
---
 arch/arm/boot/dts/rk3066a-mk808.dts | 184 ++++++++++++++++++++++++++++++++++++
 1 file changed, 184 insertions(+)
 create mode 100644 arch/arm/boot/dts/rk3066a-mk808.dts

diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
new file mode 100644
index 0000000..2878562
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -0,0 +1,184 @@
+/*
+ * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+	model = "Rikomagic MK808";
+	compatible = "rikomagic,mk808", "rockchip,rk3066a";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "mk808:blue:power";
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	mmc_pwrseq: mmc-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		reset-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwr>;
+		reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&host_drv>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-name = "host-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&otg_drv>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-name = "vcc_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	mmc-pwrseq = <&mmc_pwrseq>;
+	num-slots = <1>;
+	status = "okay";
+	vmmc-supply = <&vcc_io>;
+};
+
+&mmc1 {
+	bus-width = <4>;
+	disable-wp;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	status = "okay";
+	vmmc-supply = <&vcc_io>;
+};
+
+&pinctrl {
+	usb-host {
+		host_drv: host-drv {
+			rockchip,pins = <RK_GPIO0 6 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	usb-otg {
+		otg_drv: otg-drv {
+			rockchip,pins = <RK_GPIO0 5 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <RK_GPIO3 7 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdio {
+		wifi_pwr: wifi-pwr {
+			rockchip,pins = <RK_GPIO3 24 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
-- 
2.7.4


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip