public inbox for linux-s390@vger.kernel.org
 help / color / mirror / Atom feed
From: Claudio Imbrenda <imbrenda@linux.ibm.com>
To: pbonzini@redhat.com
Cc: kvm@vger.kernel.org, linux-s390@vger.kernel.org,
	frankja@linux.ibm.com, borntraeger@linux.ibm.com,
	hca@linux.ibm.com, gor@linux.ibm.com, agordeev@linux.ibm.com,
	thuth@redhat.com, david@redhat.com,
	Matthew Rosato <mjrosato@linux.ibm.com>,
	Alex Williamson <alex.williamson@redhat.com>,
	Pierre Morel <pmorel@linux.ibm.com>
Subject: [GIT PULL 17/42] vfio-pci/zdev: add open/close device hooks
Date: Thu, 21 Jul 2022 18:12:37 +0200	[thread overview]
Message-ID: <20220721161302.156182-18-imbrenda@linux.ibm.com> (raw)
In-Reply-To: <20220721161302.156182-1-imbrenda@linux.ibm.com>

From: Matthew Rosato <mjrosato@linux.ibm.com>

During vfio-pci open_device, pass the KVM associated with the vfio group
(if one exists).  This is needed in order to pass a special indicator
(GISA) to firmware to allow zPCI interpretation facilities to be used
for only the specific KVM associated with the vfio-pci device.  During
vfio-pci close_device, unregister the notifier.

Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-18-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
---
 drivers/vfio/pci/vfio_pci_core.c | 10 +++++++++-
 drivers/vfio/pci/vfio_pci_zdev.c | 24 ++++++++++++++++++++++++
 include/linux/vfio_pci_core.h    | 10 ++++++++++
 3 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
index a0d69ddaf90d..b1e5cfbadf38 100644
--- a/drivers/vfio/pci/vfio_pci_core.c
+++ b/drivers/vfio/pci/vfio_pci_core.c
@@ -316,10 +316,14 @@ int vfio_pci_core_enable(struct vfio_pci_core_device *vdev)
 		pci_write_config_word(pdev, PCI_COMMAND, cmd);
 	}
 
-	ret = vfio_config_init(vdev);
+	ret = vfio_pci_zdev_open_device(vdev);
 	if (ret)
 		goto out_free_state;
 
+	ret = vfio_config_init(vdev);
+	if (ret)
+		goto out_free_zdev;
+
 	msix_pos = pdev->msix_cap;
 	if (msix_pos) {
 		u16 flags;
@@ -340,6 +344,8 @@ int vfio_pci_core_enable(struct vfio_pci_core_device *vdev)
 
 	return 0;
 
+out_free_zdev:
+	vfio_pci_zdev_close_device(vdev);
 out_free_state:
 	kfree(vdev->pci_saved_state);
 	vdev->pci_saved_state = NULL;
@@ -418,6 +424,8 @@ void vfio_pci_core_disable(struct vfio_pci_core_device *vdev)
 
 	vdev->needs_reset = true;
 
+	vfio_pci_zdev_close_device(vdev);
+
 	/*
 	 * If we have saved state, restore it.  If we can reset the device,
 	 * even better.  Resetting with current state seems better than
diff --git a/drivers/vfio/pci/vfio_pci_zdev.c b/drivers/vfio/pci/vfio_pci_zdev.c
index ea4c0d2b0663..686f2e75e392 100644
--- a/drivers/vfio/pci/vfio_pci_zdev.c
+++ b/drivers/vfio/pci/vfio_pci_zdev.c
@@ -11,6 +11,7 @@
 #include <linux/uaccess.h>
 #include <linux/vfio.h>
 #include <linux/vfio_zdev.h>
+#include <linux/kvm_host.h>
 #include <asm/pci_clp.h>
 #include <asm/pci_io.h>
 
@@ -136,3 +137,26 @@ int vfio_pci_info_zdev_add_caps(struct vfio_pci_core_device *vdev,
 
 	return ret;
 }
+
+int vfio_pci_zdev_open_device(struct vfio_pci_core_device *vdev)
+{
+	struct zpci_dev *zdev = to_zpci(vdev->pdev);
+
+	if (!zdev)
+		return -ENODEV;
+
+	if (!vdev->vdev.kvm)
+		return 0;
+
+	return kvm_s390_pci_register_kvm(zdev, vdev->vdev.kvm);
+}
+
+void vfio_pci_zdev_close_device(struct vfio_pci_core_device *vdev)
+{
+	struct zpci_dev *zdev = to_zpci(vdev->pdev);
+
+	if (!zdev || !vdev->vdev.kvm)
+		return;
+
+	kvm_s390_pci_unregister_kvm(zdev);
+}
diff --git a/include/linux/vfio_pci_core.h b/include/linux/vfio_pci_core.h
index 63af2897939c..d5d9e17f0156 100644
--- a/include/linux/vfio_pci_core.h
+++ b/include/linux/vfio_pci_core.h
@@ -209,12 +209,22 @@ static inline int vfio_pci_igd_init(struct vfio_pci_core_device *vdev)
 #ifdef CONFIG_VFIO_PCI_ZDEV_KVM
 extern int vfio_pci_info_zdev_add_caps(struct vfio_pci_core_device *vdev,
 				       struct vfio_info_cap *caps);
+int vfio_pci_zdev_open_device(struct vfio_pci_core_device *vdev);
+void vfio_pci_zdev_close_device(struct vfio_pci_core_device *vdev);
 #else
 static inline int vfio_pci_info_zdev_add_caps(struct vfio_pci_core_device *vdev,
 					      struct vfio_info_cap *caps)
 {
 	return -ENODEV;
 }
+
+static inline int vfio_pci_zdev_open_device(struct vfio_pci_core_device *vdev)
+{
+	return 0;
+}
+
+static inline void vfio_pci_zdev_close_device(struct vfio_pci_core_device *vdev)
+{}
 #endif
 
 /* Will be exported for vfio pci drivers usage */
-- 
2.36.1


  parent reply	other threads:[~2022-07-21 16:14 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-21 16:12 [GIT PULL 00/42] KVM: s390: PCI, CPU topology, PV features Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 01/42] s390/sclp: detect the zPCI load/store interpretation facility Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 02/42] s390/sclp: detect the AISII facility Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 03/42] s390/sclp: detect the AENI facility Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 04/42] s390/sclp: detect the AISI facility Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 05/42] s390/airq: pass more TPI info to airq handlers Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 06/42] s390/airq: allow for airq structure that uses an input vector Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 07/42] s390/pci: externalize the SIC operation controls and routine Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 08/42] s390/pci: stash associated GISA designation Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 09/42] s390/pci: stash dtsm and maxstbl Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 10/42] vfio/pci: introduce CONFIG_VFIO_PCI_ZDEV_KVM Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 11/42] KVM: s390: pci: add basic kvm_zdev structure Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 12/42] KVM: s390: pci: do initial setup for AEN interpretation Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 13/42] KVM: s390: pci: enable host forwarding of Adapter Event Notifications Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 14/42] KVM: s390: mechanism to enable guest zPCI Interpretation Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 15/42] KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 16/42] KVM: s390: pci: add routines to start/stop interpretive execution Claudio Imbrenda
2022-07-21 16:12 ` Claudio Imbrenda [this message]
2022-07-21 16:12 ` [GIT PULL 18/42] vfio-pci/zdev: add function handle to clp base capability Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 19/42] vfio-pci/zdev: different maxstbl for interpreted devices Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 20/42] KVM: s390: add KVM_S390_ZPCI_OP to manage guest zPCI devices Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 21/42] MAINTAINERS: additional files related kvm s390 pci passthrough Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 22/42] KVM: s390: drop unexpected word 'and' in the comments Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 23/42] s390: Add attestation query information Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 24/42] KVM: s390/pci: fix include duplicates Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 25/42] Documentation: kvm: extend KVM_S390_ZPCI_OP subheading underline Claudio Imbrenda
2022-07-22  1:40   ` Bagas Sanjaya
2022-07-21 16:12 ` [GIT PULL 26/42] KVM: s390: Add facility 197 to the allow list Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 27/42] KVM: s390: pv: leak the topmost page table when destroy fails Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 28/42] KVM: s390: pv: handle secure storage violations for protected guests Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 29/42] KVM: s390: pv: handle secure storage exceptions for normal guests Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 30/42] KVM: s390: pv: refactor s390_reset_acc Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 31/42] KVM: s390: pv: usage counter instead of flag Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 32/42] KVM: s390: pv: add export before import Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 33/42] KVM: s390: pv: clear the state without memset Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 34/42] KVM: s390: pv: Add kvm_s390_cpus_from_pv to kvm-s390.h and add documentation Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 35/42] KVM: s390: pv: add mmu_notifier Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 36/42] s390/mm: KVM: pv: when tearing down, try to destroy protected pages Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 37/42] KVM: s390: pv: refactoring of kvm_s390_pv_deinit_vm Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 38/42] KVM: s390: pv: destroy the configuration before its memory Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 39/42] KVM: s390: pv: don't present the ecall interrupt twice Claudio Imbrenda
2022-07-21 16:13 ` [GIT PULL 40/42] KVM: s390: Cleanup ipte lock access and SIIF facility checks Claudio Imbrenda
2022-07-21 16:13 ` [GIT PULL 41/42] KVM: s390: guest support for topology function Claudio Imbrenda
2022-07-21 16:13 ` [GIT PULL 42/42] KVM: s390: resetting the Topology-Change-Report Claudio Imbrenda
2022-07-22  7:17 ` [GIT PULL 00/42] KVM: s390: PCI, CPU topology, PV features Paolo Bonzini
2022-07-22 10:52   ` Christian Borntraeger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220721161302.156182-18-imbrenda@linux.ibm.com \
    --to=imbrenda@linux.ibm.com \
    --cc=agordeev@linux.ibm.com \
    --cc=alex.williamson@redhat.com \
    --cc=borntraeger@linux.ibm.com \
    --cc=david@redhat.com \
    --cc=frankja@linux.ibm.com \
    --cc=gor@linux.ibm.com \
    --cc=hca@linux.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=mjrosato@linux.ibm.com \
    --cc=pbonzini@redhat.com \
    --cc=pmorel@linux.ibm.com \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox