From: Claudio Imbrenda <imbrenda@linux.ibm.com>
To: pbonzini@redhat.com
Cc: kvm@vger.kernel.org, linux-s390@vger.kernel.org,
frankja@linux.ibm.com, borntraeger@linux.ibm.com,
hca@linux.ibm.com, gor@linux.ibm.com, agordeev@linux.ibm.com,
thuth@redhat.com, david@redhat.com
Subject: [GIT PULL 31/42] KVM: s390: pv: usage counter instead of flag
Date: Thu, 21 Jul 2022 18:12:51 +0200 [thread overview]
Message-ID: <20220721161302.156182-32-imbrenda@linux.ibm.com> (raw)
In-Reply-To: <20220721161302.156182-1-imbrenda@linux.ibm.com>
Use the new protected_count field as a counter instead of the old
is_protected flag. This will be used in upcoming patches.
Increment the counter when a secure configuration is created, and
decrement it when it is destroyed. Previously the flag was set when the
set secure parameters UVC was performed.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-6-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-6-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
---
arch/s390/include/asm/mmu.h | 2 +-
arch/s390/include/asm/mmu_context.h | 2 +-
arch/s390/include/asm/pgtable.h | 2 +-
arch/s390/kvm/pv.c | 12 +++++++-----
4 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h
index 82aae78e1315..1572b3634cdd 100644
--- a/arch/s390/include/asm/mmu.h
+++ b/arch/s390/include/asm/mmu.h
@@ -18,7 +18,7 @@ typedef struct {
unsigned long asce_limit;
unsigned long vdso_base;
/* The mmu context belongs to a secure guest. */
- atomic_t is_protected;
+ atomic_t protected_count;
/*
* The following bitfields need a down_write on the mm
* semaphore when they are written to. As they are only
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index c7937f369e62..2a38af5a00c2 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -26,7 +26,7 @@ static inline int init_new_context(struct task_struct *tsk,
INIT_LIST_HEAD(&mm->context.gmap_list);
cpumask_clear(&mm->context.cpu_attach_mask);
atomic_set(&mm->context.flush_count, 0);
- atomic_set(&mm->context.is_protected, 0);
+ atomic_set(&mm->context.protected_count, 0);
mm->context.gmap_asce = 0;
mm->context.flush_mm = 0;
#ifdef CONFIG_PGSTE
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index a397b072a580..f16403ba81ec 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -525,7 +525,7 @@ static inline int mm_has_pgste(struct mm_struct *mm)
static inline int mm_is_protected(struct mm_struct *mm)
{
#ifdef CONFIG_PGSTE
- if (unlikely(atomic_read(&mm->context.is_protected)))
+ if (unlikely(atomic_read(&mm->context.protected_count)))
return 1;
#endif
return 0;
diff --git a/arch/s390/kvm/pv.c b/arch/s390/kvm/pv.c
index a556db3912a1..59e0d5399113 100644
--- a/arch/s390/kvm/pv.c
+++ b/arch/s390/kvm/pv.c
@@ -167,7 +167,8 @@ int kvm_s390_pv_deinit_vm(struct kvm *kvm, u16 *rc, u16 *rrc)
cc = uv_cmd_nodata(kvm_s390_pv_get_handle(kvm),
UVC_CMD_DESTROY_SEC_CONF, rc, rrc);
WRITE_ONCE(kvm->arch.gmap->guest_handle, 0);
- atomic_set(&kvm->mm->context.is_protected, 0);
+ if (!cc)
+ atomic_dec(&kvm->mm->context.protected_count);
KVM_UV_EVENT(kvm, 3, "PROTVIRT DESTROY VM: rc %x rrc %x", *rc, *rrc);
WARN_ONCE(cc, "protvirt destroy vm failed rc %x rrc %x", *rc, *rrc);
/* Intended memory leak on "impossible" error */
@@ -209,11 +210,14 @@ int kvm_s390_pv_init_vm(struct kvm *kvm, u16 *rc, u16 *rrc)
/* Outputs */
kvm->arch.pv.handle = uvcb.guest_handle;
+ atomic_inc(&kvm->mm->context.protected_count);
if (cc) {
- if (uvcb.header.rc & UVC_RC_NEED_DESTROY)
+ if (uvcb.header.rc & UVC_RC_NEED_DESTROY) {
kvm_s390_pv_deinit_vm(kvm, &dummy, &dummy);
- else
+ } else {
+ atomic_dec(&kvm->mm->context.protected_count);
kvm_s390_pv_dealloc_vm(kvm);
+ }
return -EIO;
}
kvm->arch.gmap->guest_handle = uvcb.guest_handle;
@@ -236,8 +240,6 @@ int kvm_s390_pv_set_sec_parms(struct kvm *kvm, void *hdr, u64 length, u16 *rc,
*rrc = uvcb.header.rrc;
KVM_UV_EVENT(kvm, 3, "PROTVIRT VM SET PARMS: rc %x rrc %x",
*rc, *rrc);
- if (!cc)
- atomic_set(&kvm->mm->context.is_protected, 1);
return cc ? -EINVAL : 0;
}
--
2.36.1
next prev parent reply other threads:[~2022-07-21 16:13 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-21 16:12 [GIT PULL 00/42] KVM: s390: PCI, CPU topology, PV features Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 01/42] s390/sclp: detect the zPCI load/store interpretation facility Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 02/42] s390/sclp: detect the AISII facility Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 03/42] s390/sclp: detect the AENI facility Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 04/42] s390/sclp: detect the AISI facility Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 05/42] s390/airq: pass more TPI info to airq handlers Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 06/42] s390/airq: allow for airq structure that uses an input vector Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 07/42] s390/pci: externalize the SIC operation controls and routine Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 08/42] s390/pci: stash associated GISA designation Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 09/42] s390/pci: stash dtsm and maxstbl Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 10/42] vfio/pci: introduce CONFIG_VFIO_PCI_ZDEV_KVM Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 11/42] KVM: s390: pci: add basic kvm_zdev structure Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 12/42] KVM: s390: pci: do initial setup for AEN interpretation Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 13/42] KVM: s390: pci: enable host forwarding of Adapter Event Notifications Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 14/42] KVM: s390: mechanism to enable guest zPCI Interpretation Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 15/42] KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 16/42] KVM: s390: pci: add routines to start/stop interpretive execution Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 17/42] vfio-pci/zdev: add open/close device hooks Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 18/42] vfio-pci/zdev: add function handle to clp base capability Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 19/42] vfio-pci/zdev: different maxstbl for interpreted devices Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 20/42] KVM: s390: add KVM_S390_ZPCI_OP to manage guest zPCI devices Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 21/42] MAINTAINERS: additional files related kvm s390 pci passthrough Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 22/42] KVM: s390: drop unexpected word 'and' in the comments Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 23/42] s390: Add attestation query information Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 24/42] KVM: s390/pci: fix include duplicates Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 25/42] Documentation: kvm: extend KVM_S390_ZPCI_OP subheading underline Claudio Imbrenda
2022-07-22 1:40 ` Bagas Sanjaya
2022-07-21 16:12 ` [GIT PULL 26/42] KVM: s390: Add facility 197 to the allow list Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 27/42] KVM: s390: pv: leak the topmost page table when destroy fails Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 28/42] KVM: s390: pv: handle secure storage violations for protected guests Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 29/42] KVM: s390: pv: handle secure storage exceptions for normal guests Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 30/42] KVM: s390: pv: refactor s390_reset_acc Claudio Imbrenda
2022-07-21 16:12 ` Claudio Imbrenda [this message]
2022-07-21 16:12 ` [GIT PULL 32/42] KVM: s390: pv: add export before import Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 33/42] KVM: s390: pv: clear the state without memset Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 34/42] KVM: s390: pv: Add kvm_s390_cpus_from_pv to kvm-s390.h and add documentation Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 35/42] KVM: s390: pv: add mmu_notifier Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 36/42] s390/mm: KVM: pv: when tearing down, try to destroy protected pages Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 37/42] KVM: s390: pv: refactoring of kvm_s390_pv_deinit_vm Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 38/42] KVM: s390: pv: destroy the configuration before its memory Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 39/42] KVM: s390: pv: don't present the ecall interrupt twice Claudio Imbrenda
2022-07-21 16:13 ` [GIT PULL 40/42] KVM: s390: Cleanup ipte lock access and SIIF facility checks Claudio Imbrenda
2022-07-21 16:13 ` [GIT PULL 41/42] KVM: s390: guest support for topology function Claudio Imbrenda
2022-07-21 16:13 ` [GIT PULL 42/42] KVM: s390: resetting the Topology-Change-Report Claudio Imbrenda
2022-07-22 7:17 ` [GIT PULL 00/42] KVM: s390: PCI, CPU topology, PV features Paolo Bonzini
2022-07-22 10:52 ` Christian Borntraeger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220721161302.156182-32-imbrenda@linux.ibm.com \
--to=imbrenda@linux.ibm.com \
--cc=agordeev@linux.ibm.com \
--cc=borntraeger@linux.ibm.com \
--cc=david@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox