From: Claudio Imbrenda <imbrenda@linux.ibm.com>
To: pbonzini@redhat.com
Cc: kvm@vger.kernel.org, linux-s390@vger.kernel.org,
frankja@linux.ibm.com, borntraeger@linux.ibm.com,
hca@linux.ibm.com, gor@linux.ibm.com, agordeev@linux.ibm.com,
thuth@redhat.com, david@redhat.com,
Matthew Rosato <mjrosato@linux.ibm.com>,
Pierre Morel <pmorel@linux.ibm.com>,
Cornelia Huck <cohuck@redhat.com>
Subject: [GIT PULL 06/42] s390/airq: allow for airq structure that uses an input vector
Date: Thu, 21 Jul 2022 18:12:26 +0200 [thread overview]
Message-ID: <20220721161302.156182-7-imbrenda@linux.ibm.com> (raw)
In-Reply-To: <20220721161302.156182-1-imbrenda@linux.ibm.com>
From: Matthew Rosato <mjrosato@linux.ibm.com>
When doing device passthrough where interrupts are being forwarded from
host to guest, we wish to use a pinned section of guest memory as the
vector (the same memory used by the guest as the vector). To accomplish
this, add a new parameter for airq_iv_create which allows passing an
existing vector to be used instead of allocating a new one. The caller
is responsible for ensuring the vector is pinned in memory as well as for
unpinning the memory when the vector is no longer needed.
A subsequent patch will use this new parameter for zPCI interpretation.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-7-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
---
arch/s390/include/asm/airq.h | 4 +++-
arch/s390/pci/pci_irq.c | 8 ++++----
drivers/s390/cio/airq.c | 10 +++++++---
drivers/s390/virtio/virtio_ccw.c | 2 +-
4 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/arch/s390/include/asm/airq.h b/arch/s390/include/asm/airq.h
index 7918a7d09028..e82e5626e139 100644
--- a/arch/s390/include/asm/airq.h
+++ b/arch/s390/include/asm/airq.h
@@ -47,8 +47,10 @@ struct airq_iv {
#define AIRQ_IV_PTR 4 /* Allocate the ptr array */
#define AIRQ_IV_DATA 8 /* Allocate the data array */
#define AIRQ_IV_CACHELINE 16 /* Cacheline alignment for the vector */
+#define AIRQ_IV_GUESTVEC 32 /* Vector is a pinned guest page */
-struct airq_iv *airq_iv_create(unsigned long bits, unsigned long flags);
+struct airq_iv *airq_iv_create(unsigned long bits, unsigned long flags,
+ unsigned long *vec);
void airq_iv_release(struct airq_iv *iv);
unsigned long airq_iv_alloc(struct airq_iv *iv, unsigned long num);
void airq_iv_free(struct airq_iv *iv, unsigned long bit, unsigned long num);
diff --git a/arch/s390/pci/pci_irq.c b/arch/s390/pci/pci_irq.c
index b805c75252ed..87c7d121c255 100644
--- a/arch/s390/pci/pci_irq.c
+++ b/arch/s390/pci/pci_irq.c
@@ -296,7 +296,7 @@ int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
zdev->aisb = bit;
/* Create adapter interrupt vector */
- zdev->aibv = airq_iv_create(msi_vecs, AIRQ_IV_DATA | AIRQ_IV_BITLOCK);
+ zdev->aibv = airq_iv_create(msi_vecs, AIRQ_IV_DATA | AIRQ_IV_BITLOCK, NULL);
if (!zdev->aibv)
return -ENOMEM;
@@ -419,7 +419,7 @@ static int __init zpci_directed_irq_init(void)
union zpci_sic_iib iib = {{0}};
unsigned int cpu;
- zpci_sbv = airq_iv_create(num_possible_cpus(), 0);
+ zpci_sbv = airq_iv_create(num_possible_cpus(), 0, NULL);
if (!zpci_sbv)
return -ENOMEM;
@@ -441,7 +441,7 @@ static int __init zpci_directed_irq_init(void)
zpci_ibv[cpu] = airq_iv_create(cache_line_size() * BITS_PER_BYTE,
AIRQ_IV_DATA |
AIRQ_IV_CACHELINE |
- (!cpu ? AIRQ_IV_ALLOC : 0));
+ (!cpu ? AIRQ_IV_ALLOC : 0), NULL);
if (!zpci_ibv[cpu])
return -ENOMEM;
}
@@ -458,7 +458,7 @@ static int __init zpci_floating_irq_init(void)
if (!zpci_ibv)
return -ENOMEM;
- zpci_sbv = airq_iv_create(ZPCI_NR_DEVICES, AIRQ_IV_ALLOC);
+ zpci_sbv = airq_iv_create(ZPCI_NR_DEVICES, AIRQ_IV_ALLOC, NULL);
if (!zpci_sbv)
goto out_free;
diff --git a/drivers/s390/cio/airq.c b/drivers/s390/cio/airq.c
index 230eb5b5b64e..34967e67249e 100644
--- a/drivers/s390/cio/airq.c
+++ b/drivers/s390/cio/airq.c
@@ -122,10 +122,12 @@ static inline unsigned long iv_size(unsigned long bits)
* airq_iv_create - create an interrupt vector
* @bits: number of bits in the interrupt vector
* @flags: allocation flags
+ * @vec: pointer to pinned guest memory if AIRQ_IV_GUESTVEC
*
* Returns a pointer to an interrupt vector structure
*/
-struct airq_iv *airq_iv_create(unsigned long bits, unsigned long flags)
+struct airq_iv *airq_iv_create(unsigned long bits, unsigned long flags,
+ unsigned long *vec)
{
struct airq_iv *iv;
unsigned long size;
@@ -146,6 +148,8 @@ struct airq_iv *airq_iv_create(unsigned long bits, unsigned long flags)
&iv->vector_dma);
if (!iv->vector)
goto out_free;
+ } else if (flags & AIRQ_IV_GUESTVEC) {
+ iv->vector = vec;
} else {
iv->vector = cio_dma_zalloc(size);
if (!iv->vector)
@@ -185,7 +189,7 @@ struct airq_iv *airq_iv_create(unsigned long bits, unsigned long flags)
kfree(iv->avail);
if (iv->flags & AIRQ_IV_CACHELINE && iv->vector)
dma_pool_free(airq_iv_cache, iv->vector, iv->vector_dma);
- else
+ else if (!(iv->flags & AIRQ_IV_GUESTVEC))
cio_dma_free(iv->vector, size);
kfree(iv);
out:
@@ -204,7 +208,7 @@ void airq_iv_release(struct airq_iv *iv)
kfree(iv->bitlock);
if (iv->flags & AIRQ_IV_CACHELINE)
dma_pool_free(airq_iv_cache, iv->vector, iv->vector_dma);
- else
+ else if (!(iv->flags & AIRQ_IV_GUESTVEC))
cio_dma_free(iv->vector, iv_size(iv->bits));
kfree(iv->avail);
kfree(iv);
diff --git a/drivers/s390/virtio/virtio_ccw.c b/drivers/s390/virtio/virtio_ccw.c
index 58cca50996ee..51bef226d33f 100644
--- a/drivers/s390/virtio/virtio_ccw.c
+++ b/drivers/s390/virtio/virtio_ccw.c
@@ -242,7 +242,7 @@ static struct airq_info *new_airq_info(int index)
return NULL;
rwlock_init(&info->lock);
info->aiv = airq_iv_create(VIRTIO_IV_BITS, AIRQ_IV_ALLOC | AIRQ_IV_PTR
- | AIRQ_IV_CACHELINE);
+ | AIRQ_IV_CACHELINE, NULL);
if (!info->aiv) {
kfree(info);
return NULL;
--
2.36.1
next prev parent reply other threads:[~2022-07-21 16:13 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-21 16:12 [GIT PULL 00/42] KVM: s390: PCI, CPU topology, PV features Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 01/42] s390/sclp: detect the zPCI load/store interpretation facility Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 02/42] s390/sclp: detect the AISII facility Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 03/42] s390/sclp: detect the AENI facility Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 04/42] s390/sclp: detect the AISI facility Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 05/42] s390/airq: pass more TPI info to airq handlers Claudio Imbrenda
2022-07-21 16:12 ` Claudio Imbrenda [this message]
2022-07-21 16:12 ` [GIT PULL 07/42] s390/pci: externalize the SIC operation controls and routine Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 08/42] s390/pci: stash associated GISA designation Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 09/42] s390/pci: stash dtsm and maxstbl Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 10/42] vfio/pci: introduce CONFIG_VFIO_PCI_ZDEV_KVM Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 11/42] KVM: s390: pci: add basic kvm_zdev structure Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 12/42] KVM: s390: pci: do initial setup for AEN interpretation Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 13/42] KVM: s390: pci: enable host forwarding of Adapter Event Notifications Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 14/42] KVM: s390: mechanism to enable guest zPCI Interpretation Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 15/42] KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 16/42] KVM: s390: pci: add routines to start/stop interpretive execution Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 17/42] vfio-pci/zdev: add open/close device hooks Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 18/42] vfio-pci/zdev: add function handle to clp base capability Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 19/42] vfio-pci/zdev: different maxstbl for interpreted devices Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 20/42] KVM: s390: add KVM_S390_ZPCI_OP to manage guest zPCI devices Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 21/42] MAINTAINERS: additional files related kvm s390 pci passthrough Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 22/42] KVM: s390: drop unexpected word 'and' in the comments Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 23/42] s390: Add attestation query information Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 24/42] KVM: s390/pci: fix include duplicates Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 25/42] Documentation: kvm: extend KVM_S390_ZPCI_OP subheading underline Claudio Imbrenda
2022-07-22 1:40 ` Bagas Sanjaya
2022-07-21 16:12 ` [GIT PULL 26/42] KVM: s390: Add facility 197 to the allow list Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 27/42] KVM: s390: pv: leak the topmost page table when destroy fails Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 28/42] KVM: s390: pv: handle secure storage violations for protected guests Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 29/42] KVM: s390: pv: handle secure storage exceptions for normal guests Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 30/42] KVM: s390: pv: refactor s390_reset_acc Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 31/42] KVM: s390: pv: usage counter instead of flag Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 32/42] KVM: s390: pv: add export before import Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 33/42] KVM: s390: pv: clear the state without memset Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 34/42] KVM: s390: pv: Add kvm_s390_cpus_from_pv to kvm-s390.h and add documentation Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 35/42] KVM: s390: pv: add mmu_notifier Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 36/42] s390/mm: KVM: pv: when tearing down, try to destroy protected pages Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 37/42] KVM: s390: pv: refactoring of kvm_s390_pv_deinit_vm Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 38/42] KVM: s390: pv: destroy the configuration before its memory Claudio Imbrenda
2022-07-21 16:12 ` [GIT PULL 39/42] KVM: s390: pv: don't present the ecall interrupt twice Claudio Imbrenda
2022-07-21 16:13 ` [GIT PULL 40/42] KVM: s390: Cleanup ipte lock access and SIIF facility checks Claudio Imbrenda
2022-07-21 16:13 ` [GIT PULL 41/42] KVM: s390: guest support for topology function Claudio Imbrenda
2022-07-21 16:13 ` [GIT PULL 42/42] KVM: s390: resetting the Topology-Change-Report Claudio Imbrenda
2022-07-22 7:17 ` [GIT PULL 00/42] KVM: s390: PCI, CPU topology, PV features Paolo Bonzini
2022-07-22 10:52 ` Christian Borntraeger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220721161302.156182-7-imbrenda@linux.ibm.com \
--to=imbrenda@linux.ibm.com \
--cc=agordeev@linux.ibm.com \
--cc=borntraeger@linux.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mjrosato@linux.ibm.com \
--cc=pbonzini@redhat.com \
--cc=pmorel@linux.ibm.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox