From: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
To: pmorel@linux.ibm.com, linux-s390@vger.kernel.org,
linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: akrowiak@linux.vnet.ibm.com, freude@de.ibm.com,
schwidefsky@de.ibm.com, heiko.carstens@de.ibm.com,
borntraeger@de.ibm.com, cohuck@redhat.com, kwankhede@nvidia.com,
bjsdjshi@linux.vnet.ibm.com, pbonzini@redhat.com,
alex.williamson@redhat.com, pmorel@linux.vnet.ibm.com,
alifm@linux.vnet.ibm.com, mjrosato@linux.vnet.ibm.com,
jjherne@linux.vnet.ibm.com, thuth@redhat.com,
pasic@linux.vnet.ibm.com, berrange@redhat.com,
fiuczy@linux.vnet.ibm.com, buendgen@de.ibm.com
Subject: Re: [PATCH v5 11/13] KVM: s390: implement mediated device open callback
Date: Wed, 23 May 2018 10:45:36 -0400 [thread overview]
Message-ID: <7bb480ac-5723-83ff-c797-53c1ab0458c1@linux.vnet.ibm.com> (raw)
In-Reply-To: <98ea7ce2-2539-e2ff-4bb4-297e784d87bd@linux.ibm.com>
On 05/16/2018 04:03 AM, Pierre Morel wrote:
> On 07/05/2018 17:11, Tony Krowiak wrote:
>> Implements the open callback on the mediated matrix device.
>> The function registers a group notifier to receive notification
>> of the VFIO_GROUP_NOTIFY_SET_KVM event. When notified,
>> the vfio_ap device driver will get access to the guest's
>> kvm structure. With access to this structure the driver will:
>>
>> 1. Ensure that only one mediated device is opened for the guest
>>
>> 2. Configure access to the AP devices for the guest.
>>
>> Access to AP adapters, usage domains and control domains
>> is controlled by three bit masks contained in the Crypto Control
>> Block (CRYCB) referenced from the guest's SIE state description:
>>
>> * The AP Mask (APM) controls access to the AP adapters. Each bit
>> in the APM represents an adapter number - from most significant
>> to least significant bit - from 0 to 255. The bits in the APM
>> are set according to the adapter numbers assigned to the mediated
>> matrix device via its 'assign_adapter' sysfs attribute file.
>>
>> * The AP Queue Mask (AQM) controls access to the AP queues. Each bit
>> in the AQM represents an AP queue index - from most significant
>> to least significant bit - from 0 to 255. A queue index references
>> a specific domain and is synonymous with the domian number. The
>> bits in the AQM are set according to the domain numbers assigned
>> to the mediated matrix device via its 'assign_domain' sysfs
>> attribute file.
>>
>> * The AP Domain Mask (ADM) controls access to the AP control
>> domains.
>> Each bit in the ADM represents a control domain - from most
>> significant to least significant bit - from 0-255. The
>> bits in the ADM are set according to the domain numbers assigned
>> to the mediated matrix device via its 'assign_control_domain'
>> sysfs attribute file.
>>
>> Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
>> ---
>> arch/s390/include/asm/kvm-ap.h | 21 ++++++++++
>> arch/s390/include/asm/kvm_host.h | 1 +
>> arch/s390/kvm/kvm-ap.c | 19 +++++++++
>> drivers/s390/crypto/vfio_ap_ops.c | 68
>> +++++++++++++++++++++++++++++++++
>> drivers/s390/crypto/vfio_ap_private.h | 2 +
>> 5 files changed, 111 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/s390/include/asm/kvm-ap.h
>> b/arch/s390/include/asm/kvm-ap.h
>> index 21fe9f2..68c5a67 100644
>> --- a/arch/s390/include/asm/kvm-ap.h
>> +++ b/arch/s390/include/asm/kvm-ap.h
>> @@ -83,6 +83,27 @@ struct kvm_ap_matrix {
>> bool kvm_ap_instructions_available(void);
>>
>> /**
>> + * kvm_ap_refcount_read
>> + *
>> + * Read the AP reference count and return it.
>> + */
>> +int kvm_ap_refcount_read(struct kvm *kvm);
>> +
>> +/**
>> + * kvm_ap_refcount_inc
>> + *
>> + * Increment the AP reference count.
>> + */
>> +void kvm_ap_refcount_inc(struct kvm *kvm);
>> +
>> +/**
>> + * kvm_ap_refcount_dec
>> + *
>> + * Decrement the AP reference count
>> + */
>> +void kvm_ap_refcount_dec(struct kvm *kvm);
>> +
>> +/**
>> * kvm_ap_configure_matrix
>> *
>> * Configure the AP matrix for a KVM guest.
>> diff --git a/arch/s390/include/asm/kvm_host.h
>> b/arch/s390/include/asm/kvm_host.h
>> index 8736cde..5f1ad02 100644
>> --- a/arch/s390/include/asm/kvm_host.h
>> +++ b/arch/s390/include/asm/kvm_host.h
>> @@ -717,6 +717,7 @@ struct kvm_s390_crypto {
>> __u8 aes_kw;
>> __u8 dea_kw;
>> __u8 apie;
>> + atomic_t aprefs;
>> };
>>
>> #define APCB0_MASK_SIZE 1
>> diff --git a/arch/s390/kvm/kvm-ap.c b/arch/s390/kvm/kvm-ap.c
>> index 98b53c7..848fb37 100644
>> --- a/arch/s390/kvm/kvm-ap.c
>> +++ b/arch/s390/kvm/kvm-ap.c
>> @@ -9,6 +9,7 @@
>> #include <linux/kernel.h>
>> #include <linux/bitops.h>
>> #include <asm/kvm-ap.h>
>> +#include <asm/atomic.h>
>>
>> #include "kvm-s390.h"
>>
>> @@ -218,6 +219,24 @@ static int kvm_ap_validate_queue_sharing(struct
>> kvm *kvm,
>> return 0;
>> }
>>
>> +int kvm_ap_refcount_read(struct kvm *kvm)
>> +{
>> + return atomic_read(&kvm->arch.crypto.aprefs);
>> +}
>> +EXPORT_SYMBOL(kvm_ap_refcount_read);
>> +
>> +void kvm_ap_refcount_inc(struct kvm *kvm)
>> +{
>> + atomic_inc(&kvm->arch.crypto.aprefs);
>> +}
>> +EXPORT_SYMBOL(kvm_ap_refcount_inc);
>> +
>> +void kvm_ap_refcount_dec(struct kvm *kvm)
>> +{
>> + atomic_dec(&kvm->arch.crypto.aprefs);
>> +}
>> +EXPORT_SYMBOL(kvm_ap_refcount_dec);
>
> Why are these functions inside kvm-ap ?
> Will anyone use this outer of vfio-ap ?
As I've stated before, I made the choice to contain all interfaces that
access KVM in kvm-ap because I don't think it is appropriate for the device
driver to have to have "knowledge" of the inner workings of KVM. Why does
it matter whether any entity outside of the vfio_ap device driver calls
these functions? I could ask a similar question if the interfaces were
contained in vfio-ap; what if another device driver needs access to these
interfaces?
>
>
>> +
>> int kvm_ap_configure_matrix(struct kvm *kvm, struct kvm_ap_matrix
>> *matrix)
>> {
>> int ret = 0;
>> diff --git a/drivers/s390/crypto/vfio_ap_ops.c
>> b/drivers/s390/crypto/vfio_ap_ops.c
>> index 81e03b8..8866b0e 100644
>> --- a/drivers/s390/crypto/vfio_ap_ops.c
>> +++ b/drivers/s390/crypto/vfio_ap_ops.c
>> @@ -11,6 +11,8 @@
>> #include <linux/device.h>
>> #include <linux/list.h>
>> #include <linux/ctype.h>
>> +#include <linux/module.h>
>> +#include <asm/kvm-ap.h>
>>
>> #include "vfio_ap_private.h"
>>
>> @@ -47,6 +49,70 @@ static int vfio_ap_mdev_remove(struct mdev_device
>> *mdev)
>> return 0;
>> }
>>
>> +static int vfio_ap_mdev_group_notifier(struct notifier_block *nb,
>> + unsigned long action, void *data)
>> +{
>> + struct ap_matrix_mdev *matrix_mdev;
>> +
>> + if (action == VFIO_GROUP_NOTIFY_SET_KVM) {
>> + matrix_mdev = container_of(nb, struct ap_matrix_mdev,
>> + group_notifier);
>> + matrix_mdev->kvm = data;
>> + }
>> +
>> + return NOTIFY_OK;
>> +}
>> +
>> +static int vfio_ap_mdev_open(struct mdev_device *mdev)
>> +{
>> + struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
>> + unsigned long events;
>> + int ret;
>> +
>> + if (!try_module_get(THIS_MODULE))
>> + return -ENODEV;
>> +
>> + matrix_mdev->group_notifier.notifier_call =
>> vfio_ap_mdev_group_notifier;
>> + events = VFIO_GROUP_NOTIFY_SET_KVM;
>> +
>> + ret = vfio_register_notifier(mdev_dev(mdev), VFIO_GROUP_NOTIFY,
>> + &events, &matrix_mdev->group_notifier);
>> + if (ret)
>> + goto out_err;
>> +
>> + /* Only one mediated device allowed per guest */
>> + if (kvm_ap_refcount_read(matrix_mdev->kvm) != 0) {
>> + ret = -EEXIST;
>> + goto out_err;
>> + }
>
> Testing the existence should be the first thing to do.
That would be better but access to KVM is not available until the
notifier runs.
>
>
>> +
>> + kvm_ap_refcount_inc(matrix_mdev->kvm);
>> +
>> + ret = kvm_ap_configure_matrix(matrix_mdev->kvm,
>> &matrix_mdev->matrix);
>> + if (ret)
>> + goto config_err;
>> +
>> + return 0;
>> +
>> +config_err:
>> + kvm_ap_refcount_dec(matrix_mdev->kvm);
>> +out_err:
>> + module_put(THIS_MODULE);
>> +
>> + return ret;
>> +}
>> +
>> +static void vfio_ap_mdev_release(struct mdev_device *mdev)
>> +{
>> + struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
>> +
>> + kvm_ap_deconfigure_matrix(matrix_mdev->kvm);
>> + vfio_unregister_notifier(mdev_dev(mdev), VFIO_GROUP_NOTIFY,
>> + &matrix_mdev->group_notifier);
>> + kvm_ap_refcount_dec(matrix_mdev->kvm);
>> + module_put(THIS_MODULE);
>> +}
>> +
>> static ssize_t name_show(struct kobject *kobj, struct device *dev,
>> char *buf)
>> {
>> return sprintf(buf, "%s\n", VFIO_AP_MDEV_NAME_HWVIRT);
>> @@ -773,6 +839,8 @@ static ssize_t matrix_show(struct device *dev,
>> struct device_attribute *attr,
>> .mdev_attr_groups = vfio_ap_mdev_attr_groups,
>> .create = vfio_ap_mdev_create,
>> .remove = vfio_ap_mdev_remove,
>> + .open = vfio_ap_mdev_open,
>> + .release = vfio_ap_mdev_release,
>> };
>>
>> int vfio_ap_mdev_register(struct ap_matrix *ap_matrix)
>> diff --git a/drivers/s390/crypto/vfio_ap_private.h
>> b/drivers/s390/crypto/vfio_ap_private.h
>> index 8b6ad66..ab072e9 100644
>> --- a/drivers/s390/crypto/vfio_ap_private.h
>> +++ b/drivers/s390/crypto/vfio_ap_private.h
>> @@ -32,6 +32,8 @@ struct ap_matrix {
>>
>> struct ap_matrix_mdev {
>> struct kvm_ap_matrix matrix;
>> + struct notifier_block group_notifier;
>> + struct kvm *kvm;
>> };
>>
>> static inline struct ap_matrix *to_ap_matrix(struct device *dev)
>
>
next prev parent reply other threads:[~2018-05-23 14:45 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-07 15:11 [PATCH v5 00/13] s390: vfio-ap: guest dedicated crypto adapters Tony Krowiak
2018-05-07 15:11 ` [PATCH v5 01/13] KVM: s390: Interface to test whether APXA installed Tony Krowiak
2018-05-16 10:21 ` Cornelia Huck
2018-05-16 10:45 ` Tony Krowiak
2018-05-17 9:11 ` Harald Freudenberger
2018-05-17 9:44 ` Cornelia Huck
2018-05-07 15:11 ` [PATCH v5 02/13] KVM: s390: refactor crypto initialization Tony Krowiak
2018-05-16 8:51 ` Pierre Morel
2018-05-16 11:14 ` Tony Krowiak
2018-05-16 12:17 ` Pierre Morel
2018-05-16 12:21 ` Cornelia Huck
2018-05-07 15:11 ` [PATCH v5 03/13] KVM: s390: CPU model support for AP virtualization Tony Krowiak
2018-05-07 15:11 ` [PATCH v5 04/13] s390: vfio-ap: base implementation of VFIO AP device driver Tony Krowiak
2018-05-16 8:21 ` Pierre Morel
2018-05-16 11:29 ` Tony Krowiak
2018-05-16 11:45 ` Tony Krowiak
2018-06-07 8:57 ` Pierre Morel
2018-06-13 7:41 ` Pierre Morel
2018-06-13 7:48 ` Cornelia Huck
2018-06-13 10:54 ` Pierre Morel
2018-06-13 11:14 ` Cornelia Huck
2018-06-13 12:01 ` Pierre Morel
2018-06-13 12:12 ` Cornelia Huck
2018-06-13 12:16 ` Pierre Morel
2018-06-14 13:04 ` Tony Krowiak
2018-05-07 15:11 ` [PATCH v5 05/13] s390: vfio-ap: register matrix device with VFIO mdev framework Tony Krowiak
2018-05-11 17:18 ` Halil Pasic
2018-05-14 19:42 ` Tony Krowiak
2018-05-15 14:17 ` Pierre Morel
2018-05-15 15:16 ` Tony Krowiak
2018-05-15 15:48 ` Halil Pasic
2018-05-15 16:11 ` Tony Krowiak
2018-05-17 7:44 ` Cornelia Huck
2018-05-21 15:13 ` Tony Krowiak
2018-05-22 8:19 ` Cornelia Huck
2018-05-22 21:41 ` Tony Krowiak
2018-05-16 10:42 ` Cornelia Huck
2018-05-16 12:48 ` Tony Krowiak
2018-05-16 12:58 ` Tony Krowiak
2018-05-07 15:11 ` [PATCH v5 06/13] KVM: s390: interfaces to manage guest's AP matrix Tony Krowiak
2018-05-11 16:08 ` Halil Pasic
2018-05-16 14:29 ` Tony Krowiak
2018-05-16 14:41 ` Pierre Morel
2018-05-21 15:23 ` Tony Krowiak
2018-05-15 14:55 ` Pierre Morel
2018-05-15 16:07 ` Tony Krowiak
2018-05-16 7:48 ` Pierre Morel
2018-05-16 13:12 ` Tony Krowiak
2018-05-16 13:15 ` Pierre Morel
2018-05-16 13:48 ` Tony Krowiak
2018-05-18 8:55 ` Pierre Morel
2018-05-23 14:29 ` Tony Krowiak
2018-05-24 7:46 ` Pierre Morel
2018-05-07 15:11 ` [PATCH v5 07/13] s390: vfio-ap: sysfs interfaces to configure adapters Tony Krowiak
2018-05-07 15:11 ` [PATCH v5 08/13] s390: vfio-ap: sysfs interfaces to configure domains Tony Krowiak
2018-05-07 15:11 ` [PATCH v5 09/13] s390: vfio-ap: sysfs interfaces to configure control domains Tony Krowiak
2018-05-07 15:11 ` [PATCH v5 10/13] s390: vfio-ap: sysfs interface to view matrix mdev matrix Tony Krowiak
2018-05-16 7:55 ` Pierre Morel
2018-05-23 14:38 ` Tony Krowiak
2018-05-24 9:10 ` Pierre Morel
2018-05-30 14:28 ` Tony Krowiak
2018-06-05 12:40 ` Pierre Morel
2018-06-06 14:24 ` Tony Krowiak
2018-06-06 15:10 ` Pierre Morel
2018-06-07 12:53 ` Tony Krowiak
2018-06-07 13:16 ` Halil Pasic
2018-06-07 14:33 ` Tony Krowiak
2018-05-07 15:11 ` [PATCH v5 11/13] KVM: s390: implement mediated device open callback Tony Krowiak
2018-05-16 8:03 ` Pierre Morel
2018-05-23 14:45 ` Tony Krowiak [this message]
2018-05-24 9:08 ` Pierre Morel
2018-05-30 14:33 ` Tony Krowiak
2018-06-05 12:19 ` Pierre Morel
2018-06-06 14:28 ` Tony Krowiak
2018-06-06 16:08 ` Pierre Morel
2018-06-06 17:40 ` Pierre Morel
2018-06-07 13:54 ` Tony Krowiak
2018-06-07 15:20 ` Pierre Morel
2018-06-07 16:30 ` Tony Krowiak
2018-06-07 17:15 ` Pierre Morel
2018-06-08 21:59 ` Tony Krowiak
2018-06-11 9:23 ` Pierre Morel
2018-06-11 11:32 ` Halil Pasic
2018-06-11 11:49 ` Janosch Frank
2018-06-11 16:26 ` Tony Krowiak
2018-06-11 16:50 ` Halil Pasic
2018-06-11 16:54 ` Tony Krowiak
2018-06-11 12:50 ` Tony Krowiak
2018-06-11 12:56 ` Tony Krowiak
2018-06-07 13:52 ` Tony Krowiak
2018-05-07 15:11 ` [PATCH v5 12/13] s390: vfio-ap: implement VFIO_DEVICE_GET_INFO ioctl Tony Krowiak
2018-05-07 15:11 ` [PATCH v5 13/13] s390: doc: detailed specifications for AP virtualization Tony Krowiak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7bb480ac-5723-83ff-c797-53c1ab0458c1@linux.vnet.ibm.com \
--to=akrowiak@linux.vnet.ibm.com \
--cc=alex.williamson@redhat.com \
--cc=alifm@linux.vnet.ibm.com \
--cc=berrange@redhat.com \
--cc=bjsdjshi@linux.vnet.ibm.com \
--cc=borntraeger@de.ibm.com \
--cc=buendgen@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=fiuczy@linux.vnet.ibm.com \
--cc=freude@de.ibm.com \
--cc=heiko.carstens@de.ibm.com \
--cc=jjherne@linux.vnet.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=kwankhede@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mjrosato@linux.vnet.ibm.com \
--cc=pasic@linux.vnet.ibm.com \
--cc=pbonzini@redhat.com \
--cc=pmorel@linux.ibm.com \
--cc=pmorel@linux.vnet.ibm.com \
--cc=schwidefsky@de.ibm.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox