Cannot get device recognized on a megaraid

Cannot get device recognized on a megaraid

[Micah Anderson]

Hi,

I've been fighting a megaraid card with one device, just trying to get
it recognized. The card has the latest bios, the drive is in a RAID 0
container. Boot up doesn't show it at all:

 megaraid: no BIOS enabled.
 
 There are two other scsi devices that we have on the machine, they are
 recognized fine:
 
 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
 Attached scsi disk sdb at scsi1, channel 0, id 2, lun 0
 SCSI device sda: 17783240 512-byte hdwr sectors (9105 MB)
 Partition check:
  sda: sda1 sda2 sda3 sda4
 sym53c875-0-<2,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 15)
 SCSI device sdb: 8888924 512-byte hdwr sectors (4551 MB)
  sdb: sdb1

What do we need to do to get the drive attached to the megaraid card
recognized? 

Thanks,
micah


 

Re: Cannot get device recognized on a megaraid

[Matt Domsch]

> I've been fighting a megaraid card with one device, just trying to get
> it recognized. The card has the latest bios, the drive is in a RAID 0
> container.

What kernel and version of the megaraid driver are you using?
What is the card type please?  What does lspci -vv and lspci -vvn show for it?

>  megaraid: no BIOS enabled.

That's fine, as long as you're not booting from it.

With the above information, we can help.

Thanks,
Matt

-- 
Matt Domsch
Sr. Software Engineer, Lead Engineer
Dell Linux Solutions www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

RE: Cannot get device recognized on a megaraid

[Mukker, Atul]

I am sure you have an older megaraid driver on the system, which does not
support your controller. Can you elaborate on the controller and the driver
version.

Thanks
-Atul Mukker
LSI Logic Corporation

> -----Original Message-----
> From: Micah Anderson [mailto:micah@riseup.net]
> Sent: Monday, November 24, 2003 11:31 AM
> To: linux-scsi@vger.kernel.org
> Subject: Cannot get device recognized on a megaraid
> 
> 
> Hi,
> 
> I've been fighting a megaraid card with one device, just trying to get
> it recognized. The card has the latest bios, the drive is in a RAID 0
> container. Boot up doesn't show it at all:
> 
>  megaraid: no BIOS enabled.
>  
>  There are two other scsi devices that we have on the 
> machine, they are
>  recognized fine:
>  
>  Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  Attached scsi disk sdb at scsi1, channel 0, id 2, lun 0
>  SCSI device sda: 17783240 512-byte hdwr sectors (9105 MB)
>  Partition check:
>   sda: sda1 sda2 sda3 sda4
>  sym53c875-0-<2,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 15)
>  SCSI device sdb: 8888924 512-byte hdwr sectors (4551 MB)
>   sdb: sdb1
> 
> What do we need to do to get the drive attached to the megaraid card
> recognized? 
> 
> Thanks,
> micah
> 
> 
>  
> -
> To unsubscribe from this list: send the line "unsubscribe 
> linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: Cannot get device recognized on a megaraid

[Micah Anderson]

[-- Attachment #1: Type: text/plain, Size: 859 bytes --]

On Mon, 24 Nov 2003, Matt Domsch wrote:

> > I've been fighting a megaraid card with one device, just trying to get
> > it recognized. The card has the latest bios, the drive is in a RAID 0
> > container.
> 
> What kernel and version of the megaraid driver are you using?

Linux kernel 2.4.22, megaraid driver that is included in that
kernel... I looked around in the kernel source, but I could not find a
version number anywhere.

> What is the card type please?  What does lspci -vv and lspci -vvn
> show for it?

I need to look up what the card type is, but until then...

I am attaching to this email two files, the first is lspci -vv output
and the second is lspci -vvn output.

> 
> >  megaraid: no BIOS enabled.
> 
> That's fine, as long as you're not booting from it.

Nope, not booting.

> 
> With the above information, we can help.

Thanks!

Micah

[-- Attachment #2: lspci-vv --]
[-- Type: text/plain, Size: 6366 bytes --]

Script started on Sun Nov 23 22:05:30 2003
\r^[[0m^[[27m^[[24m^[[Jraven% ^[[K\a\al\blspci -vv
00:00.0 Host bridge: Intel Corp. 440GX - 82443GX Host bridge
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 64
	Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
	Capabilities: <available only to root>

00:01.0 PCI bridge: Intel Corp. 440GX - 82443GX AGP bridge (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B+

00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Region 4: I/O ports at fcd0 [size=16]

00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin D routed to IRQ 19
	Region 4: I/O ports at fce0 [size=32]

00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin ? routed to IRQ 9

00:08.0 SCSI storage controller: Adaptec AIC-7880U (rev 01)
	Subsystem: Adaptec AIC-7880P Ultra/Ultra Wide SCSI Chipset
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2000ns min, 2000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at f800 [disabled] [size=256]
	Region 1: Memory at fedff000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: <available only to root>

00:10.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 (rev 0b) (prog-if 00 [VGA])
	Subsystem: Palit Microsystems Inc. SiS6326 GUI Accelerator
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fe000000 (32-bit, prefetchable) [size=8M]
	Region 1: Memory at fede0000 (32-bit, non-prefetchable) [size=64K]
	Region 2: I/O ports at fc00 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: <available only to root>

00:11.0 RAID bus controller: CMD Technology Inc: Unknown device 0680 (rev 02)
	Subsystem: LSI Logic / Symbios Logic (formerly NCR): Unknown device 0524
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, cache line size 08
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at fca8 [size=8]
	Region 1: I/O ports at fcb8 [size=4]
	Region 2: I/O ports at fcb0 [size=8]
	Region 3: I/O ports at fcbc [size=4]
	Region 4: I/O ports at fcc0 [size=16]
	Region 5: Memory at fedfec00 (32-bit, non-prefetchable) [size=256]
	Expansion ROM at <unassigned> [disabled] [size=512K]
	Capabilities: <available only to root>

00:13.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, cache line size 08
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=68
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fbf00000-fbffffff
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: <available only to root>

02:04.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c875 (rev 26)
	Subsystem: LSI Logic / Symbios Logic (formerly NCR): Unknown device 1000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 72 (4250ns min, 16000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at e800 [size=256]
	Region 1: Memory at fbfff800 (32-bit, non-prefetchable) [size=256]
	Region 2: Memory at fbffe000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=256K]
	Capabilities: <available only to root>

02:05.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet LANCE] (rev 36)
	Subsystem: Hewlett-Packard Company Ethernet with LAN remote power Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (6000ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at ece0 [size=32]
	Region 1: Memory at fbfff400 (32-bit, non-prefetchable) [size=32]
	Expansion ROM at <unassigned> [disabled] [size=1M]
	Capabilities: <available only to root>

\r^[[0m^[[27m^[[24m^[[Jraven% ^[[K

Script done on Sun Nov 23 22:05:37 2003

[-- Attachment #3: lspci-vvn --]
[-- Type: text/plain, Size: 5652 bytes --]

Script started on Sun Nov 23 22:05:45 2003
\r^[[0m^[[27m^[[24m^[[Jraven% ^[[Kl\blspci -vvn
00:00.0 Class 0600: 8086:71a0
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 64
	Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
	Capabilities: <available only to root>

00:01.0 Class 0604: 8086:71a1
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B+

00:07.0 Class 0601: 8086:7110 (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:07.1 Class 0101: 8086:7111 (rev 01) (prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Region 4: I/O ports at fcd0 [size=16]

00:07.2 Class 0c03: 8086:7112 (rev 01)
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin D routed to IRQ 19
	Region 4: I/O ports at fce0 [size=32]

00:07.3 Class 0680: 8086:7113 (rev 02)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin ? routed to IRQ 9

00:08.0 Class 0100: 9004:8078 (rev 01)
	Subsystem: 9004:7880
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2000ns min, 2000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at f800 [disabled] [size=256]
	Region 1: Memory at fedff000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: <available only to root>

00:10.0 Class 0300: 1039:6326 (rev 0b)
	Subsystem: 1569:6326
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fe000000 (32-bit, prefetchable) [size=8M]
	Region 1: Memory at fede0000 (32-bit, non-prefetchable) [size=64K]
	Region 2: I/O ports at fc00 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: <available only to root>

00:11.0 Class 0104: 1095:0680 (rev 02)
	Subsystem: 1000:0524
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, cache line size 08
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at fca8 [size=8]
	Region 1: I/O ports at fcb8 [size=4]
	Region 2: I/O ports at fcb0 [size=8]
	Region 3: I/O ports at fcbc [size=4]
	Region 4: I/O ports at fcc0 [size=16]
	Region 5: Memory at fedfec00 (32-bit, non-prefetchable) [size=256]
	Expansion ROM at <unassigned> [disabled] [size=512K]
	Capabilities: <available only to root>

00:13.0 Class 0604: 1011:0024 (rev 03)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, cache line size 08
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=68
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fbf00000-fbffffff
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: <available only to root>

02:04.0 Class 0100: 1000:000f (rev 26)
	Subsystem: 1000:1000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 72 (4250ns min, 16000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at e800 [size=256]
	Region 1: Memory at fbfff800 (32-bit, non-prefetchable) [size=256]
	Region 2: Memory at fbffe000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=256K]
	Capabilities: <available only to root>

02:05.0 Class 0200: 1022:2000 (rev 36)
	Subsystem: 103c:106e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (6000ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at ece0 [size=32]
	Region 1: Memory at fbfff400 (32-bit, non-prefetchable) [size=32]
	Expansion ROM at <unassigned> [disabled] [size=1M]
	Capabilities: <available only to root>

\r^[[0m^[[27m^[[24m^[[Jraven% ^[[K

Script done on Sun Nov 23 22:05:52 2003

Re: Cannot get device recognized on a megaraid

[Matt_Domsch]

> I've been fighting a megaraid card with one device, just trying to get
> it recognized. The card has the latest bios, the drive is in a RAID 0
> container.
>
> > What is the card type please?  What does lspci -vv and lspci -vvn
> > show for it?
> 
> I need to look up what the card type is, but until then...


00:11.0 RAID bus controller: CMD Technology Inc: Unknown device 0680 (rev
02)
        Subsystem: LSI Logic / Symbios Logic (formerly NCR): Unknown device
0524
00:11.0 Class 0104: 1095:0680 (rev 02)
        Subsystem: 1000:0524

OK, best as I know, this isn't a card that 'megaraid' supports.  More
likely 'megaide'.

http://www.lsilogic.com/techlib/techdocs/storage_stand_prod/RAIDpage/
may have docs you're looking for.


-- 
Matt Domsch
Sr. Software Engineer, Lead Engineer
Dell Linux Solutions www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

Re: Cannot get device recognized on a megaraid

[Micah Anderson]

Yeah, it is indeed the MegaRAID ATA 133 RAID Controller... are there
no linux drivers for this? :(

micah

On Mon, 24 Nov 2003, Matt_Domsch@Dell.com wrote:

> > I've been fighting a megaraid card with one device, just trying to get
> > it recognized. The card has the latest bios, the drive is in a RAID 0
> > container.
> >
> > > What is the card type please?  What does lspci -vv and lspci -vvn
> > > show for it?
> > 
> > I need to look up what the card type is, but until then...
> 
> 
> 00:11.0 RAID bus controller: CMD Technology Inc: Unknown device 0680 (rev
> 02)
>         Subsystem: LSI Logic / Symbios Logic (formerly NCR): Unknown device
> 0524
> 00:11.0 Class 0104: 1095:0680 (rev 02)
>         Subsystem: 1000:0524
> 
> OK, best as I know, this isn't a card that 'megaraid' supports.  More
> likely 'megaide'.
> 
> http://www.lsilogic.com/techlib/techdocs/storage_stand_prod/RAIDpage/
> may have docs you're looking for.
> 
> 
> -- 
> Matt Domsch
> Sr. Software Engineer, Lead Engineer
> Dell Linux Solutions www.dell.com/linux
> Linux on Dell mailing lists @ http://lists.us.dell.com
>