From: Robert Love <robert.w.love@intel.com>
To: James.Bottomley@HansenPartnership.com, linux-scsi@vger.kernel.org
Cc: Joe Eykholt <jeykholt@cisco.com>, Robert Love <robert.w.love@intel.com>
Subject: [PATCH 49/64] libfc: clean up point-to-point discovery code.
Date: Tue, 25 Aug 2009 14:02:49 -0700 [thread overview]
Message-ID: <20090825210249.1553.49289.stgit@localhost.localdomain> (raw)
In-Reply-To: <20090825205826.1553.94414.stgit@localhost.localdomain>
From: Joe Eykholt <jeykholt@cisco.com>
The discovery code had a special-case for the point-to-point mode,
which used a bunch of code that wasn't really needed.
Now that rport_create adds the rport to the discovery list,
completely skip discovery for the point-to-point case.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
---
drivers/scsi/libfc/fc_disc.c | 84 +----------------------------------------
drivers/scsi/libfc/fc_lport.c | 13 +-----
2 files changed, 4 insertions(+), 93 deletions(-)
diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c
index a2410dc..4284218 100644
--- a/drivers/scsi/libfc/fc_disc.c
+++ b/drivers/scsi/libfc/fc_disc.c
@@ -45,8 +45,6 @@
static void fc_disc_gpn_ft_req(struct fc_disc *);
static void fc_disc_gpn_ft_resp(struct fc_seq *, struct fc_frame *, void *);
-static int fc_disc_new_target(struct fc_disc *, struct fc_rport_priv *,
- struct fc_rport_identifiers *);
static void fc_disc_done(struct fc_disc *, enum fc_disc_event);
static void fc_disc_timeout(struct work_struct *);
static void fc_disc_single(struct fc_disc *, struct fc_disc_port *);
@@ -240,14 +238,12 @@ static void fc_disc_restart(struct fc_disc *disc)
/**
* fc_disc_start() - Fibre Channel Target discovery
* @lport: FC local port
- *
- * Returns non-zero if discovery cannot be started.
+ * @disc_callback: function to be called when discovery is complete
*/
static void fc_disc_start(void (*disc_callback)(struct fc_lport *,
enum fc_disc_event),
struct fc_lport *lport)
{
- struct fc_rport_priv *rdata;
struct fc_disc *disc = &lport->disc;
/*
@@ -256,88 +252,12 @@ static void fc_disc_start(void (*disc_callback)(struct fc_lport *,
* and send the GPN_FT request.
*/
mutex_lock(&disc->disc_mutex);
-
disc->disc_callback = disc_callback;
-
- /*
- * If not ready, or already running discovery, just set request flag.
- */
- disc->requested = 1;
-
- if (disc->pending) {
- mutex_unlock(&disc->disc_mutex);
- return;
- }
-
- /*
- * Handle point-to-point mode as a simple discovery
- * of the remote port. Yucky, yucky, yuck, yuck!
- */
- rdata = disc->lport->ptp_rp;
- if (rdata) {
- kref_get(&rdata->kref);
- if (!fc_disc_new_target(disc, rdata, &rdata->ids)) {
- fc_disc_done(disc, DISC_EV_SUCCESS);
- }
- kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
- } else {
- disc->disc_id = (disc->disc_id + 2) | 1;
- fc_disc_gpn_ft_req(disc); /* get ports by FC-4 type */
- }
-
+ fc_disc_restart(disc);
mutex_unlock(&disc->disc_mutex);
}
/**
- * fc_disc_new_target() - Handle new target found by discovery
- * @lport: FC local port
- * @rdata: The previous FC remote port priv (NULL if new remote port)
- * @ids: Identifiers for the new FC remote port
- *
- * Locking Note: This function expects that the disc_mutex is locked
- * before it is called.
- */
-static int fc_disc_new_target(struct fc_disc *disc,
- struct fc_rport_priv *rdata,
- struct fc_rport_identifiers *ids)
-{
- struct fc_lport *lport = disc->lport;
- int error = 0;
-
- if (rdata && ids->port_name) {
- if (rdata->ids.port_name == -1) {
- /*
- * Set WWN and fall through to notify of create.
- */
- rdata->ids.port_name = ids->port_name;
- rdata->ids.node_name = ids->node_name;
- } else if (rdata->ids.port_name != ids->port_name) {
- /*
- * This is a new port with the same FCID as
- * a previously-discovered port. Presumably the old
- * port logged out and a new port logged in and was
- * assigned the same FCID. This should be rare.
- * Delete the old one and fall thru to re-create.
- */
- lport->tt.rport_logoff(rdata);
- rdata = NULL;
- }
- }
- if (((ids->port_name != -1) || (ids->port_id != -1)) &&
- ids->port_id != fc_host_port_id(lport->host) &&
- ids->port_name != lport->wwpn) {
- if (!rdata) {
- rdata = lport->tt.rport_create(lport, ids);
- if (!rdata)
- error = -ENOMEM;
- }
- if (rdata)
- lport->tt.rport_login(rdata);
- }
- return error;
-}
-
-/**
* fc_disc_done() - Discovery has been completed
* @disc: FC discovery context
* @event: discovery completion status
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index f33e573..7000df5 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -708,7 +708,8 @@ static void fc_lport_enter_ready(struct fc_lport *lport)
fc_lport_state_enter(lport, LPORT_ST_READY);
- lport->tt.disc_start(fc_lport_disc_callback, lport);
+ if (!lport->ptp_rp)
+ lport->tt.disc_start(fc_lport_disc_callback, lport);
}
/**
@@ -794,8 +795,6 @@ static void fc_lport_recv_flogi_req(struct fc_seq *sp_in,
fc_lport_ptp_setup(lport, remote_fid, remote_wwpn,
get_unaligned_be64(&flp->fl_wwnn));
- lport->tt.disc_start(fc_lport_disc_callback, lport);
-
out:
sp = fr_seq(rx_fp);
fc_frame_free(rx_fp);
@@ -1512,14 +1511,6 @@ static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
fc_lport_enter_dns(lport);
}
}
-
- if (flp) {
- csp_flags = ntohs(flp->fl_csp.sp_features);
- if ((csp_flags & FC_SP_FT_FPORT) == 0) {
- lport->tt.disc_start(fc_lport_disc_callback,
- lport);
- }
- }
} else {
FC_LPORT_DBG(lport, "Bad FLOGI response\n");
}
next prev parent reply other threads:[~2009-08-25 21:02 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-25 20:58 [PATCH 00/64] libfc, libfcoe and fcoe updates for scsi-misc Robert Love
2009-08-25 20:58 ` [PATCH 01/64] fcoe: Add format spacing to FCOE_NETDEV_DBG debug macro Robert Love
2009-08-25 20:58 ` [PATCH 02/64] libfc: Fix misleading debug statement Robert Love
2009-08-25 20:58 ` [PATCH 03/64] fcoe: libfcoe: extra semicolon in CHECK_LOGGING macros causes compile error Robert Love
2009-08-25 20:58 ` [PATCH 04/64] fcoe, libfc: adds per cpu exch pool within exchange manager(EM) Robert Love
2009-08-25 20:58 ` [PATCH 05/64] fcoe, libfc: fully makes use of per cpu exch pool and then removes em_lock Robert Love
2009-08-25 20:58 ` [PATCH 06/64] libfc: Export FC headers Robert Love
2009-08-27 10:27 ` Christof Schmitt
2009-08-27 17:42 ` Robert Love
2009-08-28 8:32 ` Swen Schillig
2009-08-28 16:58 ` Robert Love
2009-08-25 20:59 ` [PATCH 07/64] fcoe: Add sysfs parameter to fcoe for minimum DDP read I/O size Robert Love
2009-08-25 20:59 ` [PATCH 08/64] libfcoe: fcoe_ctlr_destroy use cancel_work_sync instead of flush_work Robert Love
2009-08-25 20:59 ` [PATCH 09/64] fcoe: fix missing error check in call to fcoe_if_init Robert Love
2009-08-25 20:59 ` [PATCH 10/64] fcoe: remove unnecessary list and lock initializations Robert Love
2009-08-25 20:59 ` [PATCH 11/64] fcoe: interface changes to fcoe_if_create and fcoe_if_destroy Robert Love
2009-08-25 20:59 ` [PATCH 12/64] fcoe: Introduce and allocate fcoe_interface structure, 1:1 with net_device Robert Love
2009-08-25 20:59 ` [PATCH 13/64] fcoe: move netdev to fcoe_interface Robert Love
2009-08-25 20:59 ` [PATCH 14/64] fcoe: move packet handlers from fcoe_port " Robert Love
2009-08-25 20:59 ` [PATCH 15/64] fcoe: move FIP controller " Robert Love
2009-08-25 20:59 ` [PATCH 16/64] fcoe: move offload exchange manager pointer " Robert Love
2009-08-25 20:59 ` [PATCH 17/64] fcoe: remove fcoe_interface->priv pointer Robert Love
2009-08-25 21:00 ` [PATCH 18/64] fcoe: fcoe_interface create, destroy and refcounting Robert Love
2009-08-25 21:00 ` [PATCH 19/64] fcoe: split out per interface setup Robert Love
2009-08-25 21:00 ` [PATCH 20/64] fcoe: add mutex to protect create and destroy Robert Love
2009-08-25 21:00 ` [PATCH 21/64] fcoe: move the host-list add/remove to keep out VN_Ports Robert Love
2009-08-25 21:00 ` [PATCH 22/64] fcoe: Fix module ref count bug by adding NETDEV UNREGISTER handling Robert Love
2009-08-25 21:00 ` [PATCH 23/64] fcoe: use rtnl mutex in place of hostlist lock Robert Love
2009-08-25 21:00 ` [PATCH 24/64] libfc: prepare to split off struct fc_rport_priv from fc_rport_libfc_priv Robert Love
2009-08-25 21:00 ` [PATCH 25/64] libfc: change interface for rport_create Robert Love
2009-08-25 21:00 ` [PATCH 26/64] libfc: fix RPORT_TO_PRIV and PRIV_TO_RPORT() macros Robert Love
2009-08-25 21:00 ` [PATCH 27/64] libfc: make fc_rport_priv the primary rport interface Robert Love
2009-08-25 21:00 ` [PATCH 28/64] libfc: change elsct to use FC_ID instead of rdata Robert Love
2009-08-25 21:01 ` [PATCH 29/64] libfc: make rport structure optional Robert Love
2009-08-25 21:01 ` [PATCH 30/64] libfc: rearrange code in fc_rport_work Robert Love
2009-08-25 21:01 ` [PATCH 31/64] libfc: rename rport event CREATED to READY Robert Love
2009-08-25 21:01 ` [PATCH 32/64] libfc: don't create dummy (rogue) remote ports Robert Love
2009-08-25 21:01 ` [PATCH 33/64] libfc: fix rport event race between READY and LOGO Robert Love
2009-08-25 21:01 ` [PATCH 34/64] libfc: eliminate disc->event Robert Love
2009-08-25 21:01 ` [PATCH 35/64] libfc: remove unused disc->delay element Robert Love
2009-08-25 21:01 ` [PATCH 36/64] libfc: rport debug messages were printing pointer values Robert Love
2009-08-25 21:01 ` [PATCH 37/64] libfc: simplify fc_lport_rport_callback Robert Love
2009-08-25 21:01 ` [PATCH 38/64] libfc: make rport module maintain the rport list Robert Love
2009-08-25 21:01 ` [PATCH 39/64] libfc: have rport_create do a lookup for pre-existing rports first Robert Love
2009-08-25 21:02 ` [PATCH 40/64] libfc: change to make remote port callback optional Robert Love
2009-08-25 21:02 ` [PATCH 41/64] libfc: move rport_lookup into fc_rport.c Robert Love
2009-08-25 21:02 ` [PATCH 42/64] libfc: do not log off rports before or after discovery Robert Love
2009-08-25 21:02 ` [PATCH 43/64] libfc: discovery restart sequence error fix Robert Love
2009-08-25 21:02 ` [PATCH 44/64] libfc: rearrange code in fc_disc_gpn_ft_resp() Robert Love
2009-08-25 21:02 ` [PATCH 45/64] libfc: handle discovery failure more correctly Robert Love
2009-08-25 21:02 ` [PATCH 46/64] libfc: fix: empty zone causes endless discovery retries Robert Love
2009-08-25 21:02 ` [PATCH 47/64] libfc: discovery retry should clear pending first Robert Love
2009-08-25 21:02 ` [PATCH 48/64] libfc: discovery gpn_ft parse bug Robert Love
2009-08-25 21:02 ` Robert Love [this message]
2009-08-25 21:02 ` [PATCH 50/64] libfc: don't do discovery before callback is set Robert Love
2009-08-25 21:02 ` [PATCH 51/64] libfc: Initialize fc_rport_identifiers inside fc_rport_create Robert Love
2009-08-25 21:03 ` [PATCH 52/64] libfc: Always reset remote port roles when receiving PRLI Robert Love
2009-08-25 21:03 ` [PATCH 53/64] libfc: move remote port lookup for ELS requests into fc_rport.c Robert Love
2009-08-25 21:03 ` [PATCH 54/64] libfc: fix: rport_recv_req needs disc_mutex when calling rport_lookup Robert Love
2009-08-25 21:03 ` [PATCH 55/64] libfc: improve debug messages for ELS response handlers Robert Love
2009-08-25 21:03 ` [PATCH 56/64] libfc: correctly handle incoming PLOGI request Robert Love
2009-08-25 21:03 ` [PATCH 57/64] libfc: fix rport error handling for login-required and invalid ops Robert Love
2009-08-25 21:03 ` [PATCH 58/64] libfc: re-login to remote ports that send us LOGO Robert Love
2009-08-25 21:03 ` [PATCH 59/64] libfc: LOGO response code had extraeous enter_rtv Robert Love
2009-08-25 21:03 ` [PATCH 60/64] libfc: use ADISC to verify rport login state Robert Love
2009-08-25 21:03 ` [PATCH 61/64] libfc: fix handling of incoming Discover Address (ADISC) requests Robert Love
2009-08-25 21:03 ` [PATCH 62/64] libfc: send GPN_ID in reaction to single-port RSCNs Robert Love
2009-08-25 21:04 ` [PATCH 63/64] libfc: don't swap OX_ID and RX_ID when sending BA_RJT Robert Love
2009-08-25 21:04 ` [PATCH 64/64] fcoe: flush per-cpu thread work when destroying interface Robert Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090825210249.1553.49289.stgit@localhost.localdomain \
--to=robert.w.love@intel.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=jeykholt@cisco.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox