From: Robert Love <robert.w.love@intel.com>
To: James.Bottomley@HansenPartnership.com, linux-scsi@vger.kernel.org
Cc: Joe Eykholt <jeykholt@cisco.com>, Robert Love <robert.w.love@intel.com>
Subject: [PATCH 53/64] libfc: move remote port lookup for ELS requests into fc_rport.c.
Date: Tue, 25 Aug 2009 14:03:10 -0700 [thread overview]
Message-ID: <20090825210310.1553.97552.stgit@localhost.localdomain> (raw)
In-Reply-To: <20090825205826.1553.94414.stgit@localhost.localdomain>
From: Joe Eykholt <jeykholt@cisco.com>
This moves the remote port lookup for incoming ELS requests into
fc_rport.c, in preparation for handing PLOGI and LOGO from
unknown rports.
This changes the arg to rport_recv_req from an rdata to an lport.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
---
drivers/scsi/libfc/fc_lport.c | 30 +---------------
drivers/scsi/libfc/fc_rport.c | 78 ++++++++++++++++++++++-------------------
include/scsi/libfc.h | 2 +
3 files changed, 44 insertions(+), 66 deletions(-)
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index caf6824..d3f4e0c 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -812,10 +812,6 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_seq *sp,
{
struct fc_frame_header *fh = fc_frame_header_get(fp);
void (*recv) (struct fc_seq *, struct fc_frame *, struct fc_lport *);
- struct fc_rport_priv *rdata;
- u32 s_id;
- u32 d_id;
- struct fc_seq_els_data rjt_data;
mutex_lock(&lport->lp_mutex);
@@ -831,7 +827,7 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_seq *sp,
/*
* Check opcode.
*/
- recv = NULL;
+ recv = lport->tt.rport_recv_req;
switch (fc_frame_payload_op(fp)) {
case ELS_FLOGI:
recv = fc_lport_recv_flogi_req;
@@ -858,29 +854,7 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_seq *sp,
break;
}
- if (recv)
- recv(sp, fp, lport);
- else {
- /*
- * Find session.
- * If this is a new incoming PLOGI, we won't find it.
- */
- s_id = ntoh24(fh->fh_s_id);
- d_id = ntoh24(fh->fh_d_id);
-
- rdata = lport->tt.rport_lookup(lport, s_id);
- if (rdata)
- lport->tt.rport_recv_req(sp, fp, rdata);
- else {
- rjt_data.fp = NULL;
- rjt_data.reason = ELS_RJT_UNAB;
- rjt_data.explan = ELS_EXPL_NONE;
- lport->tt.seq_els_rsp_send(sp,
- ELS_LS_RJT,
- &rjt_data);
- fc_frame_free(fp);
- }
- }
+ recv(sp, fp, lport);
} else {
FC_LPORT_DBG(lport, "dropping invalid frame (eof %x)\n",
fr_eof(fp));
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index cb54115..acdc72d 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -912,57 +912,61 @@ static void fc_rport_enter_logo(struct fc_rport_priv *rdata)
* fc_rport_recv_req() - Receive a request from a rport
* @sp: current sequence in the PLOGI exchange
* @fp: response frame
- * @rdata_arg: private remote port data
+ * @lport: Fibre Channel local port
*
- * Locking Note: Called without the rport lock held. This
- * function will hold the rport lock, call an _enter_*
- * function and then unlock the rport.
+ * Locking Note: Called with the lport lock held.
*/
void fc_rport_recv_req(struct fc_seq *sp, struct fc_frame *fp,
- struct fc_rport_priv *rdata)
+ struct fc_lport *lport)
{
- struct fc_lport *lport = rdata->local_port;
-
+ struct fc_rport_priv *rdata;
struct fc_frame_header *fh;
struct fc_seq_els_data els_data;
+ u32 s_id;
u8 op;
- mutex_lock(&rdata->rp_mutex);
-
els_data.fp = NULL;
els_data.explan = ELS_EXPL_NONE;
els_data.reason = ELS_RJT_NONE;
fh = fc_frame_header_get(fp);
+ s_id = ntoh24(fh->fh_s_id);
- if (fh->fh_r_ctl == FC_RCTL_ELS_REQ && fh->fh_type == FC_TYPE_ELS) {
- op = fc_frame_payload_op(fp);
- switch (op) {
- case ELS_PLOGI:
- fc_rport_recv_plogi_req(rdata, sp, fp);
- break;
- case ELS_PRLI:
- fc_rport_recv_prli_req(rdata, sp, fp);
- break;
- case ELS_PRLO:
- fc_rport_recv_prlo_req(rdata, sp, fp);
- break;
- case ELS_LOGO:
- fc_rport_recv_logo_req(rdata, sp, fp);
- break;
- case ELS_RRQ:
- els_data.fp = fp;
- lport->tt.seq_els_rsp_send(sp, ELS_RRQ, &els_data);
- break;
- case ELS_REC:
- els_data.fp = fp;
- lport->tt.seq_els_rsp_send(sp, ELS_REC, &els_data);
- break;
- default:
- els_data.reason = ELS_RJT_UNSUP;
- lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &els_data);
- break;
- }
+ rdata = lport->tt.rport_lookup(lport, s_id);
+ if (!rdata) {
+ els_data.reason = ELS_RJT_UNAB;
+ lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &els_data);
+ fc_frame_free(fp);
+ return;
+ }
+ mutex_lock(&rdata->rp_mutex);
+
+ op = fc_frame_payload_op(fp);
+ switch (op) {
+ case ELS_PLOGI:
+ fc_rport_recv_plogi_req(rdata, sp, fp);
+ break;
+ case ELS_PRLI:
+ fc_rport_recv_prli_req(rdata, sp, fp);
+ break;
+ case ELS_PRLO:
+ fc_rport_recv_prlo_req(rdata, sp, fp);
+ break;
+ case ELS_LOGO:
+ fc_rport_recv_logo_req(rdata, sp, fp);
+ break;
+ case ELS_RRQ:
+ els_data.fp = fp;
+ lport->tt.seq_els_rsp_send(sp, ELS_RRQ, &els_data);
+ break;
+ case ELS_REC:
+ els_data.fp = fp;
+ lport->tt.seq_els_rsp_send(sp, ELS_REC, &els_data);
+ break;
+ default:
+ els_data.reason = ELS_RJT_UNSUP;
+ lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &els_data);
+ break;
}
mutex_unlock(&rdata->rp_mutex);
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index cd410c1..265f106 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -598,7 +598,7 @@ struct libfc_function_template {
* STATUS: OPTIONAL
*/
void (*rport_recv_req)(struct fc_seq *, struct fc_frame *,
- struct fc_rport_priv *);
+ struct fc_lport *);
/*
* lookup an rport by it's port ID.
next prev parent reply other threads:[~2009-08-25 21:03 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-25 20:58 [PATCH 00/64] libfc, libfcoe and fcoe updates for scsi-misc Robert Love
2009-08-25 20:58 ` [PATCH 01/64] fcoe: Add format spacing to FCOE_NETDEV_DBG debug macro Robert Love
2009-08-25 20:58 ` [PATCH 02/64] libfc: Fix misleading debug statement Robert Love
2009-08-25 20:58 ` [PATCH 03/64] fcoe: libfcoe: extra semicolon in CHECK_LOGGING macros causes compile error Robert Love
2009-08-25 20:58 ` [PATCH 04/64] fcoe, libfc: adds per cpu exch pool within exchange manager(EM) Robert Love
2009-08-25 20:58 ` [PATCH 05/64] fcoe, libfc: fully makes use of per cpu exch pool and then removes em_lock Robert Love
2009-08-25 20:58 ` [PATCH 06/64] libfc: Export FC headers Robert Love
2009-08-27 10:27 ` Christof Schmitt
2009-08-27 17:42 ` Robert Love
2009-08-28 8:32 ` Swen Schillig
2009-08-28 16:58 ` Robert Love
2009-08-25 20:59 ` [PATCH 07/64] fcoe: Add sysfs parameter to fcoe for minimum DDP read I/O size Robert Love
2009-08-25 20:59 ` [PATCH 08/64] libfcoe: fcoe_ctlr_destroy use cancel_work_sync instead of flush_work Robert Love
2009-08-25 20:59 ` [PATCH 09/64] fcoe: fix missing error check in call to fcoe_if_init Robert Love
2009-08-25 20:59 ` [PATCH 10/64] fcoe: remove unnecessary list and lock initializations Robert Love
2009-08-25 20:59 ` [PATCH 11/64] fcoe: interface changes to fcoe_if_create and fcoe_if_destroy Robert Love
2009-08-25 20:59 ` [PATCH 12/64] fcoe: Introduce and allocate fcoe_interface structure, 1:1 with net_device Robert Love
2009-08-25 20:59 ` [PATCH 13/64] fcoe: move netdev to fcoe_interface Robert Love
2009-08-25 20:59 ` [PATCH 14/64] fcoe: move packet handlers from fcoe_port " Robert Love
2009-08-25 20:59 ` [PATCH 15/64] fcoe: move FIP controller " Robert Love
2009-08-25 20:59 ` [PATCH 16/64] fcoe: move offload exchange manager pointer " Robert Love
2009-08-25 20:59 ` [PATCH 17/64] fcoe: remove fcoe_interface->priv pointer Robert Love
2009-08-25 21:00 ` [PATCH 18/64] fcoe: fcoe_interface create, destroy and refcounting Robert Love
2009-08-25 21:00 ` [PATCH 19/64] fcoe: split out per interface setup Robert Love
2009-08-25 21:00 ` [PATCH 20/64] fcoe: add mutex to protect create and destroy Robert Love
2009-08-25 21:00 ` [PATCH 21/64] fcoe: move the host-list add/remove to keep out VN_Ports Robert Love
2009-08-25 21:00 ` [PATCH 22/64] fcoe: Fix module ref count bug by adding NETDEV UNREGISTER handling Robert Love
2009-08-25 21:00 ` [PATCH 23/64] fcoe: use rtnl mutex in place of hostlist lock Robert Love
2009-08-25 21:00 ` [PATCH 24/64] libfc: prepare to split off struct fc_rport_priv from fc_rport_libfc_priv Robert Love
2009-08-25 21:00 ` [PATCH 25/64] libfc: change interface for rport_create Robert Love
2009-08-25 21:00 ` [PATCH 26/64] libfc: fix RPORT_TO_PRIV and PRIV_TO_RPORT() macros Robert Love
2009-08-25 21:00 ` [PATCH 27/64] libfc: make fc_rport_priv the primary rport interface Robert Love
2009-08-25 21:00 ` [PATCH 28/64] libfc: change elsct to use FC_ID instead of rdata Robert Love
2009-08-25 21:01 ` [PATCH 29/64] libfc: make rport structure optional Robert Love
2009-08-25 21:01 ` [PATCH 30/64] libfc: rearrange code in fc_rport_work Robert Love
2009-08-25 21:01 ` [PATCH 31/64] libfc: rename rport event CREATED to READY Robert Love
2009-08-25 21:01 ` [PATCH 32/64] libfc: don't create dummy (rogue) remote ports Robert Love
2009-08-25 21:01 ` [PATCH 33/64] libfc: fix rport event race between READY and LOGO Robert Love
2009-08-25 21:01 ` [PATCH 34/64] libfc: eliminate disc->event Robert Love
2009-08-25 21:01 ` [PATCH 35/64] libfc: remove unused disc->delay element Robert Love
2009-08-25 21:01 ` [PATCH 36/64] libfc: rport debug messages were printing pointer values Robert Love
2009-08-25 21:01 ` [PATCH 37/64] libfc: simplify fc_lport_rport_callback Robert Love
2009-08-25 21:01 ` [PATCH 38/64] libfc: make rport module maintain the rport list Robert Love
2009-08-25 21:01 ` [PATCH 39/64] libfc: have rport_create do a lookup for pre-existing rports first Robert Love
2009-08-25 21:02 ` [PATCH 40/64] libfc: change to make remote port callback optional Robert Love
2009-08-25 21:02 ` [PATCH 41/64] libfc: move rport_lookup into fc_rport.c Robert Love
2009-08-25 21:02 ` [PATCH 42/64] libfc: do not log off rports before or after discovery Robert Love
2009-08-25 21:02 ` [PATCH 43/64] libfc: discovery restart sequence error fix Robert Love
2009-08-25 21:02 ` [PATCH 44/64] libfc: rearrange code in fc_disc_gpn_ft_resp() Robert Love
2009-08-25 21:02 ` [PATCH 45/64] libfc: handle discovery failure more correctly Robert Love
2009-08-25 21:02 ` [PATCH 46/64] libfc: fix: empty zone causes endless discovery retries Robert Love
2009-08-25 21:02 ` [PATCH 47/64] libfc: discovery retry should clear pending first Robert Love
2009-08-25 21:02 ` [PATCH 48/64] libfc: discovery gpn_ft parse bug Robert Love
2009-08-25 21:02 ` [PATCH 49/64] libfc: clean up point-to-point discovery code Robert Love
2009-08-25 21:02 ` [PATCH 50/64] libfc: don't do discovery before callback is set Robert Love
2009-08-25 21:02 ` [PATCH 51/64] libfc: Initialize fc_rport_identifiers inside fc_rport_create Robert Love
2009-08-25 21:03 ` [PATCH 52/64] libfc: Always reset remote port roles when receiving PRLI Robert Love
2009-08-25 21:03 ` Robert Love [this message]
2009-08-25 21:03 ` [PATCH 54/64] libfc: fix: rport_recv_req needs disc_mutex when calling rport_lookup Robert Love
2009-08-25 21:03 ` [PATCH 55/64] libfc: improve debug messages for ELS response handlers Robert Love
2009-08-25 21:03 ` [PATCH 56/64] libfc: correctly handle incoming PLOGI request Robert Love
2009-08-25 21:03 ` [PATCH 57/64] libfc: fix rport error handling for login-required and invalid ops Robert Love
2009-08-25 21:03 ` [PATCH 58/64] libfc: re-login to remote ports that send us LOGO Robert Love
2009-08-25 21:03 ` [PATCH 59/64] libfc: LOGO response code had extraeous enter_rtv Robert Love
2009-08-25 21:03 ` [PATCH 60/64] libfc: use ADISC to verify rport login state Robert Love
2009-08-25 21:03 ` [PATCH 61/64] libfc: fix handling of incoming Discover Address (ADISC) requests Robert Love
2009-08-25 21:03 ` [PATCH 62/64] libfc: send GPN_ID in reaction to single-port RSCNs Robert Love
2009-08-25 21:04 ` [PATCH 63/64] libfc: don't swap OX_ID and RX_ID when sending BA_RJT Robert Love
2009-08-25 21:04 ` [PATCH 64/64] fcoe: flush per-cpu thread work when destroying interface Robert Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090825210310.1553.97552.stgit@localhost.localdomain \
--to=robert.w.love@intel.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=jeykholt@cisco.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox