[PATCH v5 24/42] hpsa: clean up some error reporting output in abort handler

[Don Brace <don.brace@pmcs.com>]

From: Robert Elliott <elliott@hp.com>

report more useful information on aborts

Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Hannes Reinecke <hare@Suse.de>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
 drivers/scsi/hpsa.c |   24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index df2c825..224fc48 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -5102,10 +5102,10 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
 		return FAILED;
 
 	memset(msg, 0, sizeof(msg));
-	ml += sprintf(msg+ml, "scsi %d:%d:%d:%llu %s",
+	ml += sprintf(msg+ml, "scsi %d:%d:%d:%llu %s %p",
 		h->scsi_host->host_no, sc->device->channel,
 		sc->device->id, sc->device->lun,
-		"Aborting command");
+		"Aborting command", sc);
 
 	/* Get SCSI command to be aborted */
 	abort = (struct CommandList *) sc->host_scribble;
@@ -5131,10 +5131,13 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
 	ml += sprintf(msg+ml, "Tag:0x%08x:%08x ", tagupper, taglower);
 	as  = abort->scsi_cmd;
 	if (as != NULL)
-		ml += sprintf(msg+ml, "Command:0x%x SN:0x%lx ",
-			as->cmnd[0], as->serial_number);
-	dev_dbg(&h->pdev->dev, "%s\n", msg);
+		ml += sprintf(msg+ml,
+			"CDBLen: %d CDB: 0x%02x%02x... SN: 0x%lx ",
+			as->cmd_len, as->cmnd[0], as->cmnd[1],
+			as->serial_number);
+	dev_warn(&h->pdev->dev, "%s BEING SENT\n", msg);
 	hpsa_show_dev_msg(KERN_WARNING, h, dev, "Aborting command");
+
 	/*
 	 * Command is in flight, or possibly already completed
 	 * by the firmware (but not to the scsi mid layer) but we can't
@@ -5142,7 +5145,8 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
 	 */
 	if (wait_for_available_abort_cmd(h)) {
 		dev_warn(&h->pdev->dev,
-			"Timed out waiting for an abort command to become available.\n");
+			"%s FAILED, timeout waiting for an abort command to become available.\n",
+			msg);
 		cmd_free(h, abort);
 		return FAILED;
 	}
@@ -5150,14 +5154,16 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
 	atomic_inc(&h->abort_cmds_available);
 	wake_up_all(&h->abort_cmd_wait_queue);
 	if (rc != 0) {
+		dev_warn(&h->pdev->dev, "%s SENT, FAILED\n", msg);
 		hpsa_show_dev_msg(KERN_WARNING, h, dev,
-					"FAILED to abort command");
+				"FAILED to abort command");
 		cmd_free(h, abort);
 		return FAILED;
 	}
-	dev_info(&h->pdev->dev, "%s REQUEST SUCCEEDED.\n", msg);
+	dev_info(&h->pdev->dev, "%s SENT, SUCCESS\n", msg);
 
-	/* If the abort(s) above completed and actually aborted the
+	/*
+	 * If the abort(s) above completed and actually aborted the
 	 * command, then the command to be aborted should already be
 	 * completed.  If not, wait around a bit more to see if they
 	 * manage to complete normally.