[PATCH 09/37] scsi: sr: use 16-bits defined sense codes

[Damien Le Moal <dlemoal@kernel.org>]

Refactor the SCSI CDROM driver to use the 16-bits sense_code field of
struct scsi_sense_hdr and replace all hard-coded additional sense codes
and additional sense code qualifiers with the enum values defined in
include/scsi/scsi_sense.h. This helps with code clarity as the sense codes
being processed are easier to test and self-documented.

No functional change intended.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
---
 drivers/scsi/sr.c       |  3 ++-
 drivers/scsi/sr_ioctl.c | 29 +++++++++++------------------
 2 files changed, 13 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index c36c54ecd354..4f2e8d1be6da 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -253,7 +253,8 @@ static unsigned int sr_check_events(struct cdrom_device_info *cdi,
 	 * (ASC 0x3a).
 	 */
 	cd->media_present = scsi_status_is_good(ret) ||
-		(scsi_sense_valid(&sshdr) && sshdr.asc != 0x3a);
+		(scsi_sense_valid(&sshdr) &&
+		 scsi_sense_asc(&sshdr) != ASC_MEDIUM_NOT_PRESENT);
 
 	if (last_present != cd->media_present)
 		cd->device->changed = 1;
diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c
index 089653018d32..e4ec0f63cdcc 100644
--- a/drivers/scsi/sr_ioctl.c
+++ b/drivers/scsi/sr_ioctl.c
@@ -226,9 +226,8 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc)
 			err = -ENOMEDIUM;
 			break;
 		case NOT_READY:	/* This happens if there is no disc in drive */
-			if (sshdr->asc == 0x04 &&
-			    sshdr->ascq == 0x01) {
-				/* sense: Logical unit is in process of becoming ready */
+			if (sshdr->sense_code ==
+			    LU_IS_IN_PROCESS_OF_BECOMING_READY) {
 				if (!cgc->quiet)
 					sr_printk(KERN_INFO, cd,
 						  "CDROM not ready yet.\n");
@@ -250,9 +249,7 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc)
 			break;
 		case ILLEGAL_REQUEST:
 			err = -EIO;
-			if (sshdr->asc == 0x20 &&
-			    sshdr->ascq == 0x00)
-				/* sense: Invalid command operation code */
+			if (sshdr->sense_code == INVALID_COMMAND_OP_CODE)
 				err = -EDRIVE_CANT_DO_THIS;
 			break;
 		default:
@@ -303,9 +300,8 @@ int sr_drive_status(struct cdrom_device_info *cdi, int slot)
 	if (!scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr))
 		return CDS_DISC_OK;
 
-	/* SK/ASC/ASCQ of 2/4/1 means "unit is becoming ready" */
-	if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY
-			&& sshdr.asc == 0x04 && sshdr.ascq == 0x01)
+	if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY &&
+	    sshdr.sense_code == LU_IS_IN_PROCESS_OF_BECOMING_READY)
 		return CDS_DRIVE_NOT_READY;
 
 	if (!cdrom_get_media_event(cdi, &med)) {
@@ -318,18 +314,18 @@ int sr_drive_status(struct cdrom_device_info *cdi, int slot)
 	}
 
 	/*
-	 * SK/ASC/ASCQ of 2/4/2 means "initialization required"
 	 * Using CD_TRAY_OPEN results in an START_STOP_UNIT to close
 	 * the tray, which resolves the initialization requirement.
 	 */
-	if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY
-			&& sshdr.asc == 0x04 && sshdr.ascq == 0x02)
+	if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY &&
+	    sshdr.sense_code == LU_NOT_READY_INITIALIZING_COMMAND_REQUIRED)
 		return CDS_TRAY_OPEN;
 
 	/*
 	 * 0x04 is format in progress .. but there must be a disc present!
 	 */
-	if (sshdr.sense_key == NOT_READY && sshdr.asc == 0x04)
+	if (sshdr.sense_key == NOT_READY &&
+	    scsi_sense_asc(&sshdr) == ASC_LU_NOT_READY)
 		return CDS_DISC_OK;
 
 	/*
@@ -338,13 +334,10 @@ int sr_drive_status(struct cdrom_device_info *cdi, int slot)
 	 * any other way to detect this...
 	 */
 	if (scsi_sense_valid(&sshdr) &&
-	    /* 0x3a is medium not present */
-	    sshdr.asc == 0x3a)
+	    scsi_sense_asc(&sshdr) == ASC_MEDIUM_NOT_PRESENT)
 		return CDS_NO_DISC;
-	else
-		return CDS_TRAY_OPEN;
 
-	return CDS_DRIVE_NOT_READY;
+	return CDS_TRAY_OPEN;
 }
 
 int sr_disk_status(struct cdrom_device_info *cdi)
-- 
2.55.0