From: Takashi Iwai <tiwai@suse.de>
To: "Jarosław Janik" <jaroslaw.janik@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>, Takashi Iwai <tiwai@suse.com>,
linux-sound@vger.kernel.org
Subject: Re: [PATCH 0/2] Fix beep notifications by Thinkpad's ACPI firmware
Date: Thu, 14 Nov 2024 14:42:15 +0100 [thread overview]
Message-ID: <877c96szig.wl-tiwai@suse.de> (raw)
In-Reply-To: <e1ce4d0b-23ad-46a8-9f46-c38194376f76@gmail.com>
On Thu, 14 Nov 2024 01:04:22 +0100,
Jarosław Janik wrote:
>
> On 8.11.2024 15:17, Takashi Iwai wrote:
> > OTOH, a question is rather the other route -- the beep via pcspkr
> > driver -- if this beep still works while the HD-audio is runtime
> > suspended: that's the interesting point. Could you check that?
> > You can figure out which input device corresponds what, and try to
> > trigger directly there.
>
> Beep via pcspkr module works fine without your patch - regardless of
> current PM state of HDA device; with your patch applied - the beep is
> very quiet if HDA is suspended (same as with firmware generated beeps).
>
> > Also, one more question is whether the beep tone persists if you mute
> > the volume on the HD-audio (e.g. set "Speaker Playback Switch" to
> > off). The beep tone at shutdown should be gone in this state, too.
>
> pcspkr generated beeps are immune to every mixer/switch setting except
> for "Master Mute Switch", which mutes them completely (i.e. they are not
> very quiet, they are gone). And again - this is the very same as with
> firmware beeps; that would mean that both (firmware's and pcspkr's) are
> using PIT to drive "PC Speaker".
So, if the HD-audio Master volume influence on the beep output of
pcspkr, it means that it's flowing over HD-audio, likely there is some
analog-input loopback.
Could you give alsa-info.sh output? (Run with --no-upload option and
attach the output).
If there is a mixer widget there, one of input pins might correspond
to the analog beep input -- even if the pin is marked as unused.
Takashi
next prev parent reply other threads:[~2024-11-14 13:42 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-30 17:18 [PATCH 0/2] Fix beep notifications by Thinkpad's ACPI firmware Jarosław Janik
2024-10-30 17:18 ` [PATCH 1/2] Revert "ALSA: hda/conexant: Mute speakers at suspend / shutdown" Jarosław Janik
2024-10-30 17:18 ` [PATCH 2/2] Revert "ALSA: hda/generic: Add a helper to mute speakers at suspend/shutdown" Jarosław Janik
2024-10-31 9:15 ` [PATCH 0/2] Fix beep notifications by Thinkpad's ACPI firmware Takashi Iwai
2024-10-31 16:12 ` Jarosław Janik
2024-10-31 16:21 ` Takashi Iwai
2024-10-31 16:43 ` Jarosław Janik
2024-11-01 8:18 ` Takashi Iwai
2024-11-01 23:15 ` Jarosław Janik
2024-11-02 8:27 ` Takashi Iwai
2024-11-02 22:45 ` Jarosław Janik
2024-11-08 14:17 ` Takashi Iwai
2024-11-14 0:04 ` Jarosław Janik
2024-11-14 13:42 ` Takashi Iwai [this message]
2024-11-15 4:34 ` Jarosław Janik
2024-11-19 15:21 ` Takashi Iwai
2024-11-20 1:29 ` Jarosław Janik
2024-11-20 7:04 ` Takashi Iwai
2024-11-20 15:00 ` Jarosław Janik
2024-11-20 15:09 ` Takashi Iwai
2024-11-21 1:15 ` Jarosław Janik
2024-11-21 15:39 ` Takashi Iwai
2024-10-31 18:53 ` Thorsten Leemhuis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=877c96szig.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=jaroslaw.janik@gmail.com \
--cc=linux-sound@vger.kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox