Linux Sound subsystem development
 help / color / mirror / Atom feed
From: "Jarosław Janik" <jaroslaw.janik@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Takashi Iwai <tiwai@suse.com>, linux-sound@vger.kernel.org
Subject: Re: [PATCH 0/2] Fix beep notifications by Thinkpad's ACPI firmware
Date: Thu, 14 Nov 2024 01:04:22 +0100	[thread overview]
Message-ID: <e1ce4d0b-23ad-46a8-9f46-c38194376f76@gmail.com> (raw)
In-Reply-To: <87a5e9g68w.wl-tiwai@suse.de>

On 8.11.2024 15:17, Takashi Iwai wrote:
> OTOH, a question is rather the other route -- the beep via pcspkr
> driver -- if this beep still works while the HD-audio is runtime
> suspended: that's the interesting point.  Could you check that?
> You can figure out which input device corresponds what, and try to
> trigger directly there.

Beep via pcspkr module works fine without your patch - regardless of
current PM state of HDA device; with your patch applied - the beep is
very quiet if HDA is suspended (same as with firmware generated beeps).

> Also, one more question is whether the beep tone persists if you mute
> the volume on the HD-audio (e.g. set "Speaker Playback Switch" to
> off).  The beep tone at shutdown should be gone in this state, too.

pcspkr generated beeps are immune to every mixer/switch setting except
for "Master Mute Switch", which mutes them completely (i.e. they are not
very quiet, they are gone). And again - this is the very same as with
firmware beeps; that would mean that both (firmware's and pcspkr's) are
using PIT to drive "PC Speaker".

> Yes, the revert is on the way to 6.12-rc7.

Already there by now, thanks!

-- 
Regards!
Jarosław Janik

  reply	other threads:[~2024-11-14  0:04 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-30 17:18 [PATCH 0/2] Fix beep notifications by Thinkpad's ACPI firmware Jarosław Janik
2024-10-30 17:18 ` [PATCH 1/2] Revert "ALSA: hda/conexant: Mute speakers at suspend / shutdown" Jarosław Janik
2024-10-30 17:18 ` [PATCH 2/2] Revert "ALSA: hda/generic: Add a helper to mute speakers at suspend/shutdown" Jarosław Janik
2024-10-31  9:15 ` [PATCH 0/2] Fix beep notifications by Thinkpad's ACPI firmware Takashi Iwai
2024-10-31 16:12   ` Jarosław Janik
2024-10-31 16:21     ` Takashi Iwai
2024-10-31 16:43       ` Jarosław Janik
2024-11-01  8:18         ` Takashi Iwai
2024-11-01 23:15           ` Jarosław Janik
2024-11-02  8:27             ` Takashi Iwai
2024-11-02 22:45               ` Jarosław Janik
2024-11-08 14:17                 ` Takashi Iwai
2024-11-14  0:04                   ` Jarosław Janik [this message]
2024-11-14 13:42                     ` Takashi Iwai
2024-11-15  4:34                       ` Jarosław Janik
2024-11-19 15:21                         ` Takashi Iwai
2024-11-20  1:29                           ` Jarosław Janik
2024-11-20  7:04                             ` Takashi Iwai
2024-11-20 15:00                               ` Jarosław Janik
2024-11-20 15:09                                 ` Takashi Iwai
2024-11-21  1:15                                   ` Jarosław Janik
2024-11-21 15:39                                     ` Takashi Iwai
2024-10-31 18:53   ` Thorsten Leemhuis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e1ce4d0b-23ad-46a8-9f46-c38194376f76@gmail.com \
    --to=jaroslaw.janik@gmail.com \
    --cc=linux-sound@vger.kernel.org \
    --cc=tiwai@suse.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox