From: sashiko-bot@kernel.org
To: "Srinivas Kandagatla" <srinivas.kandagatla@oss.qualcomm.com>
Cc: linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
robh@kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH v2 07/24] ASoC: codecs: wsa883x: add VI sense capture DAI
Date: Sun, 22 Nov 2026 16:28:10 +0000 [thread overview]
Message-ID: <sashiko-outbox-228098@kernel.org> (raw)
In-Reply-To: <20261122161437.5994-8-srinivas.kandagatla@oss.qualcomm.com>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Medium] ASoC: codecs: wsa883x: missing port_enable check in
wsa883x_vi_hw_params()
--
commit 82c65105b12aa380210860d9001570f29fccfcce
Author: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
ASoC: codecs: wsa883x: add VI sense capture DAI
This commit moves the visense port to the SoundWire source port mask, adds
a dedicated capture digital audio interface and stream runtime for it, and
programs the host clock divider in bus_config.
> diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c
> index 64391d654a08b..6de669288d6aa 100644
> --- a/sound/soc/codecs/wsa883x.c
> +++ b/sound/soc/codecs/wsa883x.c
[ ... ]
> @@ -1335,6 +1351,25 @@ static const struct snd_soc_component_driver wsa883x_component_drv = {
> .num_dapm_routes = ARRAY_SIZE(wsa883x_audio_map),
> };
>
> +static int wsa883x_vi_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params,
> + struct snd_soc_dai *dai)
> +{
> + struct wsa883x_priv *wsa883x = dev_get_drvdata(dai->dev);
> +
> + wsa883x->vi_port_config = wsa883x_pconfig[WSA883X_PORT_VISENSE];
> + wsa883x->vi_sconfig.frame_rate = params_rate(params);
> + /* VISENSE carries the V and I sense pair */
> + wsa883x->vi_sconfig.ch_count = 2;
> + wsa883x->vi_sconfig.bps = 1;
> + wsa883x->vi_sconfig.type = SDW_STREAM_PDM;
> + wsa883x->vi_sconfig.direction = SDW_DATA_DIR_TX;
> +
> + return sdw_stream_add_slave(wsa883x->slave, &wsa883x->vi_sconfig,
> + &wsa883x->vi_port_config, 1,
> + wsa883x->vi_sruntime);
> +}
> +
> static int wsa883x_hw_params(struct snd_pcm_substream *substream,
> struct snd_pcm_hw_params *params,
> struct snd_soc_dai *dai)
> @@ -1344,6 +1379,9 @@ static int wsa883x_hw_params(struct snd_pcm_substream *substream,
>
> wsa883x->active_ports = 0;
> for (i = 0; i < WSA883X_MAX_SWR_PORTS; i++) {
> + /* VISENSE is driven by the separate VI capture DAI */
> + if (i == WSA883X_PORT_VISENSE)
> + continue;
> if (!wsa883x->port_enable[i])
> continue;
[Severity: Medium]
Should wsa883x_vi_hw_params() check wsa883x->port_enable for the visense
port before calling sdw_stream_add_slave(), the same way
wsa884x_vi_hw_params() does?
Skipping this port before the port_enable[i] check in wsa883x_hw_params()
removes the only reader of that entry, which makes the visense switch
mixer control a no-op and unconditionally adds the port and its two-channel
bandwidth to the SoundWire capture stream even when disabled on an
inactive speaker.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261122161437.5994-1-srinivas.kandagatla@oss.qualcomm.com?part=7
next prev parent reply other threads:[~2026-11-22 16:28 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-23 17:14 [RFC PATCH 00/23] ASoC: qcom: AudioReach Active speaker protection for WSA884x Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 01/23] ASoC: soc-core: allow default ch_maps on links with more than 8 DAIs Srinivas Kandagatla
2026-11-15 17:36 ` Mark Brown
2026-11-15 21:04 ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 02/23] ASoC: soc-pcm: add multi_direction_codecs link flag Srinivas Kandagatla
2026-11-15 17:36 ` Mark Brown
2026-11-15 21:04 ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 03/23] ASoC: qcom: sdw: add per-direction stream runtimes for multi_direction links Srinivas Kandagatla
2026-11-15 17:36 ` Mark Brown
2026-11-15 21:04 ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 04/23] ASoC: dt-bindings: qcom,wsa8840: allow one sound DAI cell Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 05/23] ASoC: codecs: wsa884x: add VI sense capture DAI Srinivas Kandagatla
2026-11-15 17:36 ` Mark Brown
2026-11-15 21:03 ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 06/23] ASoC: codecs: wsa884x: register the die temperature as a thermal zone Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 07/23] ASoC: qcom: audioreach: add control link support to graphs Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 08/23] ASoC: qcom: audioreach: run VI module in calibration mode with per-speaker events Srinivas Kandagatla
2026-11-15 17:36 ` Mark Brown
2026-11-15 21:04 ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 09/23] ASoC: qcom: q6apm-dai: add S32_LE format support Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 10/23] ASoC: qcom: audioreach: support up to four speakers in VI feedback Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 11/23] ASoC: qcom: audioreach: cache VI calibration results per speaker Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 12/23] ASoC: qcom: audioreach: make the speaker protection operation mode configurable Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 13/23] ASoC: qcom: audioreach: send cached R0/T0 to the VI module in normal mode Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 14/23] ASoC: qcom: audioreach: send static cfg blobs to speaker protection modules Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 15/23] ASoC: qcom: audioreach: add speaker protection mixer controls Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 16/23] ASoC: qcom: audioreach: pin SPEAKER_PROTECTION_VI media format Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 17/23] ASoC: qcom: audioreach: add live speaker temperature (T0) readback Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 18/23] ASoC: qcom: audioreach: add speaker protection calibration state control Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 19/23] ASoC: qcom: audioreach: keep the last VI calibration result until the DSP reports Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 20/23] ASoC: qcom: x1e80100: carry WSA VI feedback on the WSA Playback BE link Srinivas Kandagatla
2026-11-15 17:36 ` Mark Brown
2026-11-15 21:03 ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 21/23] ASoC: qcom: x1e80100: register WSA speaker thermal zones for speaker protection Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 22/23] arm64: dts: qcom: glymur-crd: add WSA speaker protection VI feedback Srinivas Kandagatla
2026-10-28 13:38 ` Konrad Dybcio
2026-10-28 21:59 ` Srinivas Kandagatla
2026-10-29 8:17 ` Konrad Dybcio
2026-10-23 17:14 ` [RFC PATCH 23/23] arm64: dts: qcom: mahua-t14s: " Srinivas Kandagatla
2026-10-28 12:39 ` [RFC PATCH 00/23] ASoC: qcom: AudioReach Active speaker protection for WSA884x Mark Brown
2026-10-28 16:31 ` Fabian Renn-Giles
2026-10-28 21:56 ` Srinivas Kandagatla
2026-11-15 22:07 ` Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 00/24] ASoC: qcom: AudioReach Active speaker protection for WSA88xx Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 01/24] ASoC: soc-core: always allocate default ch_maps Srinivas Kandagatla
2026-11-22 16:31 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 02/24] ASoC: soc-pcm: add multi_direction_codecs link flag Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 03/24] ASoC: soc-dai: export snd_soc_dai_stream_valid Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 04/24] ASoC: qcom: sdw: add per-direction stream runtimes for multi_direction links Srinivas Kandagatla
2026-11-22 16:38 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 05/24] ASoC: dt-bindings: qcom,wsa8840: allow one sound DAI cell Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 06/24] ASoC: codecs: wsa884x: add VI sense capture DAI Srinivas Kandagatla
2026-11-22 16:28 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 07/24] ASoC: codecs: wsa883x: " Srinivas Kandagatla
2026-11-22 16:28 ` sashiko-bot [this message]
2026-11-22 16:14 ` [PATCH v2 08/24] ASoC: codecs: wsa884x: register the die temperature as a thermal zone Srinivas Kandagatla
2026-11-22 16:28 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 09/24] ASoC: qcom: audioreach: add control link support to graphs Srinivas Kandagatla
2026-11-22 16:32 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 10/24] ASoC: qcom: audioreach: run VI module in calibration mode with per-speaker events Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 11/24] ASoC: qcom: q6apm-dai: add S32_LE format support Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 12/24] ASoC: qcom: audioreach: cache VI calibration results per speaker Srinivas Kandagatla
2026-11-22 16:22 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 13/24] ASoC: qcom: audioreach: add speaker protection calibration trigger infrastructure Srinivas Kandagatla
2026-11-22 16:31 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 14/24] ASoC: qcom: audioreach: send cached R0/T0 to the VI module in normal mode Srinivas Kandagatla
2026-11-22 16:28 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 15/24] ASoC: qcom: audioreach: send static cfg blobs to speaker protection modules Srinivas Kandagatla
2026-11-22 16:31 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 16/24] ASoC: qcom: audioreach: add speaker protection mixer controls Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 17/24] ASoC: qcom: audioreach: pin SPEAKER_PROTECTION_VI media format Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 18/24] ASoC: qcom: audioreach: add live speaker temperature (T0) readback Srinivas Kandagatla
2026-11-22 16:37 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 19/24] ASoC: qcom: audioreach: add speaker protection calibration state control Srinivas Kandagatla
2026-11-22 16:37 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 20/24] ASoC: qcom: x1e80100: carry WSA VI feedback on the WSA Playback BE link Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 21/24] ASoC: qcom: x1e80100: register WSA speaker thermal zones for speaker protection Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 22/24] arm64: dts: qcom: glymur-crd: add WSA speaker protection VI feedback Srinivas Kandagatla
2026-11-22 16:39 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 23/24] arm64: dts: qcom: mahua-t14s: " Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 24/24] arm64: dts: qcom: x1e78100-t14s: " Srinivas Kandagatla
2026-11-22 16:37 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-228098@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=srinivas.kandagatla@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox