From: sashiko-bot@kernel.org
To: "Srinivas Kandagatla" <srinivas.kandagatla@oss.qualcomm.com>
Cc: linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
robh@kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH v2 18/24] ASoC: qcom: audioreach: add live speaker temperature (T0) readback
Date: Sun, 22 Nov 2026 16:37:13 +0000 [thread overview]
Message-ID: <sashiko-outbox-228109@kernel.org> (raw)
In-Reply-To: <20261122161437.5994-19-srinivas.kandagatla@oss.qualcomm.com>
Thank you for your contribution! Sashiko AI review found 2 potential
issues to consider:
- [High] ASoC: qcom: audioreach: raw 64-bit division in
audioreach_get_sp_vi_t0() breaks 32-bit builds
- [Medium] ASoC: qcom: audioreach: T0 read in
audioreach_vi_calibration_event() while PA is active
--
commit 3728c7efdae7573a4ea88b27f3a3cef2f0452415
Author: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
ASoC: qcom: audioreach: add live speaker temperature (T0) readback
This commit allows the machine driver to register speaker thermal zones in
VI channel order, exposes their Q6 temperatures via a read-only "Speaker
Protection T0" ALSA control, and records T0 alongside R0 when calibration
completes.
> diff --git a/sound/soc/qcom/qdsp6/audioreach.c b/sound/soc/qcom/qdsp6/audioreach.c
> index 97d8585a287ba..2bb56933b9de4 100644
> --- a/sound/soc/qcom/qdsp6/audioreach.c
> +++ b/sound/soc/qcom/qdsp6/audioreach.c
[ ... ]
> @@ -1605,6 +1613,50 @@ void audioreach_get_sp_vi_r0t0(long *vals, unsigned int count)
> }
> }
>
> +int audioreach_sp_register_speaker_map(struct thermal_zone_device * const *tzs,
> + unsigned int num)
> +{
[ ... ]
> +}
> +EXPORT_SYMBOL_GPL(audioreach_sp_register_speaker_map);
> +
> +/* Read each speaker's T0 in Q6 (degC * 64), 0 if its zone cannot be read */
> +int audioreach_get_sp_vi_t0(long *vals, unsigned int count)
> +{
> + unsigned int i, n;
> +
> + guard(mutex)(&sp_speaker_map_lock);
> +
> + n = min(count, sp_speaker_map.num);
> + for (i = 0; i < n; i++) {
> + int mdeg;
> +
> + if (sp_speaker_map.tz[i] &&
> + !thermal_zone_get_temp(sp_speaker_map.tz[i], &mdeg))
> + vals[i] = ((s64)mdeg * 64) / 1000;
[Severity: High]
Does dividing ((s64)mdeg * 64) with the plain / operator break 32-bit
builds (where SND_SOC_QDSP6 is reachable under ARCH_QCOM || COMPILE_TEST)
with an undefined reference to __aeabi_ldivmod or __divdi3? Using
div_s64((s64)mdeg * 64, 1000) avoids the 64-bit division helper.
[ ... ]
> @@ -1730,12 +1783,20 @@ void audioreach_vi_calibration_event(struct device *dev,
> i, r0_int, r0_frac, sp_vi_r0.r0_cali_q24[i]);
> }
>
> - /* Only a run where every speaker succeeded gives a usable R0/T0 set */
> + /*
> + * Only a run where every speaker succeeded gives a usable R0/T0 set.
> + * The DSP reports only R0, so pair it with the speakers' last T0
> + * reading; a zone that cannot be read gives T0 = 0.
> + */
> if (success) {
> + audioreach_get_sp_vi_t0(t0_live, num_ch);
> +
> guard(mutex)(&sp_vi_r0t0_cfg_lock);
> sp_vi_r0t0_cfg.num_ch = num_ch;
> - for (i = 0; i < num_ch; i++)
> + for (i = 0; i < num_ch; i++) {
> sp_vi_r0t0_cfg.r0_cali_q24[i] = cali->cali_param[i].r0_cali_q24;
> + sp_vi_r0t0_cfg.t0_cali_q6[i] = (s16)t0_live[i];
> + }
> }
[Severity: Medium]
Can audioreach_get_sp_vi_t0() here record 0 (0.000 degC in Q6) into
sp_vi_r0t0_cfg.t0_cali_q6[] on WSA884x speaker amplifiers because the PA is
still active when the calibration completion event arrives?
wsa884x_get_temp() cannot read hardware temperature registers while
wsa884x->pa_on is true and returns -EAGAIN unless wsa884x->temperature was
previously cached while the PA was off:
sound/soc/codecs/wsa884x.c:wsa884x_get_temp() {
...
if (wsa884x->pa_on) {
/*
* Reading temperature is possible only when Power Amplifier is
* off. Report last cached data if we have one, -EAGAIN otherwise.
*/
if (!wsa884x->temperature)
return -EAGAIN;
*temp = wsa884x->temperature * 1000;
return 0;
}
...
}
Because wsa884x_probe() enables its tripless thermal zone before SoundWire
attachment (while wsa884x->hw_init is false), wsa884x->temperature starts
at 0 and is not polled. If calibration runs before anything reads the
thermal zone with the PA off, thermal_zone_get_temp() fails during
audioreach_vi_calibration_event() and t0_cali_q6[i] is set to 0, which lies
within [SP_VI_T0_MIN_Q6, SP_VI_T0_MAX_Q6] and is sent to the DSP as a 0 degC
calibration reference on subsequent normal playback. Sampling
audioreach_get_sp_vi_t0() when arming calibration in DAI prepare (before
DAPM powers on the PA) would prime the reading while the PA is still off.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261122161437.5994-1-srinivas.kandagatla@oss.qualcomm.com?part=18
next prev parent reply other threads:[~2026-11-22 16:37 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-23 17:14 [RFC PATCH 00/23] ASoC: qcom: AudioReach Active speaker protection for WSA884x Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 01/23] ASoC: soc-core: allow default ch_maps on links with more than 8 DAIs Srinivas Kandagatla
2026-11-15 17:36 ` Mark Brown
2026-11-15 21:04 ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 02/23] ASoC: soc-pcm: add multi_direction_codecs link flag Srinivas Kandagatla
2026-11-15 17:36 ` Mark Brown
2026-11-15 21:04 ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 03/23] ASoC: qcom: sdw: add per-direction stream runtimes for multi_direction links Srinivas Kandagatla
2026-11-15 17:36 ` Mark Brown
2026-11-15 21:04 ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 04/23] ASoC: dt-bindings: qcom,wsa8840: allow one sound DAI cell Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 05/23] ASoC: codecs: wsa884x: add VI sense capture DAI Srinivas Kandagatla
2026-11-15 17:36 ` Mark Brown
2026-11-15 21:03 ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 06/23] ASoC: codecs: wsa884x: register the die temperature as a thermal zone Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 07/23] ASoC: qcom: audioreach: add control link support to graphs Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 08/23] ASoC: qcom: audioreach: run VI module in calibration mode with per-speaker events Srinivas Kandagatla
2026-11-15 17:36 ` Mark Brown
2026-11-15 21:04 ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 09/23] ASoC: qcom: q6apm-dai: add S32_LE format support Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 10/23] ASoC: qcom: audioreach: support up to four speakers in VI feedback Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 11/23] ASoC: qcom: audioreach: cache VI calibration results per speaker Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 12/23] ASoC: qcom: audioreach: make the speaker protection operation mode configurable Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 13/23] ASoC: qcom: audioreach: send cached R0/T0 to the VI module in normal mode Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 14/23] ASoC: qcom: audioreach: send static cfg blobs to speaker protection modules Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 15/23] ASoC: qcom: audioreach: add speaker protection mixer controls Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 16/23] ASoC: qcom: audioreach: pin SPEAKER_PROTECTION_VI media format Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 17/23] ASoC: qcom: audioreach: add live speaker temperature (T0) readback Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 18/23] ASoC: qcom: audioreach: add speaker protection calibration state control Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 19/23] ASoC: qcom: audioreach: keep the last VI calibration result until the DSP reports Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 20/23] ASoC: qcom: x1e80100: carry WSA VI feedback on the WSA Playback BE link Srinivas Kandagatla
2026-11-15 17:36 ` Mark Brown
2026-11-15 21:03 ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 21/23] ASoC: qcom: x1e80100: register WSA speaker thermal zones for speaker protection Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 22/23] arm64: dts: qcom: glymur-crd: add WSA speaker protection VI feedback Srinivas Kandagatla
2026-10-28 13:38 ` Konrad Dybcio
2026-10-28 21:59 ` Srinivas Kandagatla
2026-10-29 8:17 ` Konrad Dybcio
2026-10-23 17:14 ` [RFC PATCH 23/23] arm64: dts: qcom: mahua-t14s: " Srinivas Kandagatla
2026-10-28 12:39 ` [RFC PATCH 00/23] ASoC: qcom: AudioReach Active speaker protection for WSA884x Mark Brown
2026-10-28 16:31 ` Fabian Renn-Giles
2026-10-28 21:56 ` Srinivas Kandagatla
2026-11-15 22:07 ` Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 00/24] ASoC: qcom: AudioReach Active speaker protection for WSA88xx Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 01/24] ASoC: soc-core: always allocate default ch_maps Srinivas Kandagatla
2026-11-22 16:31 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 02/24] ASoC: soc-pcm: add multi_direction_codecs link flag Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 03/24] ASoC: soc-dai: export snd_soc_dai_stream_valid Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 04/24] ASoC: qcom: sdw: add per-direction stream runtimes for multi_direction links Srinivas Kandagatla
2026-11-22 16:38 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 05/24] ASoC: dt-bindings: qcom,wsa8840: allow one sound DAI cell Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 06/24] ASoC: codecs: wsa884x: add VI sense capture DAI Srinivas Kandagatla
2026-11-22 16:28 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 07/24] ASoC: codecs: wsa883x: " Srinivas Kandagatla
2026-11-22 16:28 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 08/24] ASoC: codecs: wsa884x: register the die temperature as a thermal zone Srinivas Kandagatla
2026-11-22 16:28 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 09/24] ASoC: qcom: audioreach: add control link support to graphs Srinivas Kandagatla
2026-11-22 16:32 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 10/24] ASoC: qcom: audioreach: run VI module in calibration mode with per-speaker events Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 11/24] ASoC: qcom: q6apm-dai: add S32_LE format support Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 12/24] ASoC: qcom: audioreach: cache VI calibration results per speaker Srinivas Kandagatla
2026-11-22 16:22 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 13/24] ASoC: qcom: audioreach: add speaker protection calibration trigger infrastructure Srinivas Kandagatla
2026-11-22 16:31 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 14/24] ASoC: qcom: audioreach: send cached R0/T0 to the VI module in normal mode Srinivas Kandagatla
2026-11-22 16:28 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 15/24] ASoC: qcom: audioreach: send static cfg blobs to speaker protection modules Srinivas Kandagatla
2026-11-22 16:31 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 16/24] ASoC: qcom: audioreach: add speaker protection mixer controls Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 17/24] ASoC: qcom: audioreach: pin SPEAKER_PROTECTION_VI media format Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 18/24] ASoC: qcom: audioreach: add live speaker temperature (T0) readback Srinivas Kandagatla
2026-11-22 16:37 ` sashiko-bot [this message]
2026-11-22 16:14 ` [PATCH v2 19/24] ASoC: qcom: audioreach: add speaker protection calibration state control Srinivas Kandagatla
2026-11-22 16:37 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 20/24] ASoC: qcom: x1e80100: carry WSA VI feedback on the WSA Playback BE link Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 21/24] ASoC: qcom: x1e80100: register WSA speaker thermal zones for speaker protection Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 22/24] arm64: dts: qcom: glymur-crd: add WSA speaker protection VI feedback Srinivas Kandagatla
2026-11-22 16:39 ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 23/24] arm64: dts: qcom: mahua-t14s: " Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 24/24] arm64: dts: qcom: x1e78100-t14s: " Srinivas Kandagatla
2026-11-22 16:37 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-228109@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=srinivas.kandagatla@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox