Linux Sound subsystem development
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Srinivas Kandagatla" <srinivas.kandagatla@oss.qualcomm.com>
Cc: linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
	robh@kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH v2 01/24] ASoC: soc-core: always allocate default ch_maps
Date: Sun, 22 Nov 2026 16:31:51 +0000	[thread overview]
Message-ID: <sashiko-outbox-228106@kernel.org> (raw)
In-Reply-To: <20261122161437.5994-2-srinivas.kandagatla@oss.qualcomm.com>

Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [High] ASoC: soc-core: use-after-free write in snd_soc_clear_ch_maps()
--

commit 60ecf0d83132d848d26d62ada9e8bfdded707649
Author: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>

ASoC: soc-core: always allocate default ch_maps

This commit replaces the static 12-entry default channel map tables with a
per-link devm allocation on card->dev and registers a devm action to clear
dai_link->ch_maps on release.

> diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
> index 7dfd79b4ca3e5..ccd1cb5ee673f 100644
> --- a/sound/soc/soc-core.c
> +++ b/sound/soc/soc-core.c
> @@ -766,63 +766,20 @@ static int soc_dai_link_sanity_check(struct snd_soc_card *card,
>  	return -EINVAL;
>  }
>  
[ ... ]
> +static void snd_soc_clear_ch_maps(void *data)
> +{
> +	struct snd_soc_dai_link *dai_link = data;
> +
> +	dai_link->ch_maps = NULL;
> +}
> +
>  static int snd_soc_compensate_channel_connection_map(struct snd_soc_card *card,
>  						     struct snd_soc_dai_link *dai_link)
>  {
[ ... ]
> @@ -830,24 +787,38 @@ static int snd_soc_compensate_channel_connection_map(struct snd_soc_card *card,
[ ... ]
> +	dai_link->ch_maps = ch_maps;
> +	ret = devm_add_action_or_reset(card->dev, snd_soc_clear_ch_maps, dai_link);
> +	if (ret)
> +		return ret;

[Severity: High]
Can snd_soc_clear_ch_maps() cause a use-after-free write when dai_link is
not static or devm-allocated?

A driver's .remove() callback (and .probe() error cleanup) runs before
device_unbind_cleanup() calls devres_release_all(card->dev).  Drivers such
as sound/soc/meson/meson-card-utils.c allocate card->dai_link with
krealloc() and kfree() it in meson_card_clean_references() during .remove()
and on .probe() failure, so snd_soc_clear_ch_maps() will write NULL into
freed heap memory when devres tears down card->dev.

Also, devres on card->dev does not run across component-triggered card
unbind/rebind cycles (snd_soc_card_unbind() / snd_soc_card_bind()), so
dynamically created topology DAI links (e.g. soc_tplg_fe_link_create())
will accumulate unreleased ch_maps allocations and devres actions on
card->dev across rebinds.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261122161437.5994-1-srinivas.kandagatla@oss.qualcomm.com?part=1

  reply	other threads:[~2026-11-22 16:31 UTC|newest]

Thread overview: 82+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-23 17:14 [RFC PATCH 00/23] ASoC: qcom: AudioReach Active speaker protection for WSA884x Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 01/23] ASoC: soc-core: allow default ch_maps on links with more than 8 DAIs Srinivas Kandagatla
2026-11-15 17:36   ` Mark Brown
2026-11-15 21:04     ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 02/23] ASoC: soc-pcm: add multi_direction_codecs link flag Srinivas Kandagatla
2026-11-15 17:36   ` Mark Brown
2026-11-15 21:04     ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 03/23] ASoC: qcom: sdw: add per-direction stream runtimes for multi_direction links Srinivas Kandagatla
2026-11-15 17:36   ` Mark Brown
2026-11-15 21:04     ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 04/23] ASoC: dt-bindings: qcom,wsa8840: allow one sound DAI cell Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 05/23] ASoC: codecs: wsa884x: add VI sense capture DAI Srinivas Kandagatla
2026-11-15 17:36   ` Mark Brown
2026-11-15 21:03     ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 06/23] ASoC: codecs: wsa884x: register the die temperature as a thermal zone Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 07/23] ASoC: qcom: audioreach: add control link support to graphs Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 08/23] ASoC: qcom: audioreach: run VI module in calibration mode with per-speaker events Srinivas Kandagatla
2026-11-15 17:36   ` Mark Brown
2026-11-15 21:04     ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 09/23] ASoC: qcom: q6apm-dai: add S32_LE format support Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 10/23] ASoC: qcom: audioreach: support up to four speakers in VI feedback Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 11/23] ASoC: qcom: audioreach: cache VI calibration results per speaker Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 12/23] ASoC: qcom: audioreach: make the speaker protection operation mode configurable Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 13/23] ASoC: qcom: audioreach: send cached R0/T0 to the VI module in normal mode Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 14/23] ASoC: qcom: audioreach: send static cfg blobs to speaker protection modules Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 15/23] ASoC: qcom: audioreach: add speaker protection mixer controls Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 16/23] ASoC: qcom: audioreach: pin SPEAKER_PROTECTION_VI media format Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 17/23] ASoC: qcom: audioreach: add live speaker temperature (T0) readback Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 18/23] ASoC: qcom: audioreach: add speaker protection calibration state control Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 19/23] ASoC: qcom: audioreach: keep the last VI calibration result until the DSP reports Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 20/23] ASoC: qcom: x1e80100: carry WSA VI feedback on the WSA Playback BE link Srinivas Kandagatla
2026-11-15 17:36   ` Mark Brown
2026-11-15 21:03     ` Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 21/23] ASoC: qcom: x1e80100: register WSA speaker thermal zones for speaker protection Srinivas Kandagatla
2026-10-23 17:14 ` [RFC PATCH 22/23] arm64: dts: qcom: glymur-crd: add WSA speaker protection VI feedback Srinivas Kandagatla
2026-10-28 13:38   ` Konrad Dybcio
2026-10-28 21:59     ` Srinivas Kandagatla
2026-10-29  8:17       ` Konrad Dybcio
2026-10-23 17:14 ` [RFC PATCH 23/23] arm64: dts: qcom: mahua-t14s: " Srinivas Kandagatla
2026-10-28 12:39 ` [RFC PATCH 00/23] ASoC: qcom: AudioReach Active speaker protection for WSA884x Mark Brown
2026-10-28 16:31 ` Fabian Renn-Giles
2026-10-28 21:56   ` Srinivas Kandagatla
2026-11-15 22:07     ` Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 00/24] ASoC: qcom: AudioReach Active speaker protection for WSA88xx Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 01/24] ASoC: soc-core: always allocate default ch_maps Srinivas Kandagatla
2026-11-22 16:31   ` sashiko-bot [this message]
2026-11-22 16:14 ` [PATCH v2 02/24] ASoC: soc-pcm: add multi_direction_codecs link flag Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 03/24] ASoC: soc-dai: export snd_soc_dai_stream_valid Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 04/24] ASoC: qcom: sdw: add per-direction stream runtimes for multi_direction links Srinivas Kandagatla
2026-11-22 16:38   ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 05/24] ASoC: dt-bindings: qcom,wsa8840: allow one sound DAI cell Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 06/24] ASoC: codecs: wsa884x: add VI sense capture DAI Srinivas Kandagatla
2026-11-22 16:28   ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 07/24] ASoC: codecs: wsa883x: " Srinivas Kandagatla
2026-11-22 16:28   ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 08/24] ASoC: codecs: wsa884x: register the die temperature as a thermal zone Srinivas Kandagatla
2026-11-22 16:28   ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 09/24] ASoC: qcom: audioreach: add control link support to graphs Srinivas Kandagatla
2026-11-22 16:32   ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 10/24] ASoC: qcom: audioreach: run VI module in calibration mode with per-speaker events Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 11/24] ASoC: qcom: q6apm-dai: add S32_LE format support Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 12/24] ASoC: qcom: audioreach: cache VI calibration results per speaker Srinivas Kandagatla
2026-11-22 16:22   ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 13/24] ASoC: qcom: audioreach: add speaker protection calibration trigger infrastructure Srinivas Kandagatla
2026-11-22 16:31   ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 14/24] ASoC: qcom: audioreach: send cached R0/T0 to the VI module in normal mode Srinivas Kandagatla
2026-11-22 16:28   ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 15/24] ASoC: qcom: audioreach: send static cfg blobs to speaker protection modules Srinivas Kandagatla
2026-11-22 16:31   ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 16/24] ASoC: qcom: audioreach: add speaker protection mixer controls Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 17/24] ASoC: qcom: audioreach: pin SPEAKER_PROTECTION_VI media format Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 18/24] ASoC: qcom: audioreach: add live speaker temperature (T0) readback Srinivas Kandagatla
2026-11-22 16:37   ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 19/24] ASoC: qcom: audioreach: add speaker protection calibration state control Srinivas Kandagatla
2026-11-22 16:37   ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 20/24] ASoC: qcom: x1e80100: carry WSA VI feedback on the WSA Playback BE link Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 21/24] ASoC: qcom: x1e80100: register WSA speaker thermal zones for speaker protection Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 22/24] arm64: dts: qcom: glymur-crd: add WSA speaker protection VI feedback Srinivas Kandagatla
2026-11-22 16:39   ` sashiko-bot
2026-11-22 16:14 ` [PATCH v2 23/24] arm64: dts: qcom: mahua-t14s: " Srinivas Kandagatla
2026-11-22 16:14 ` [PATCH v2 24/24] arm64: dts: qcom: x1e78100-t14s: " Srinivas Kandagatla
2026-11-22 16:37   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-228106@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    --cc=srinivas.kandagatla@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox