Re: [PATCH 4.19 000/639] 4.19.99-stable review

Re: [PATCH 4.19 000/639] 4.19.99-stable review

[Jon Hunter]

Hi Greg,

On 24/01/2020 09:22, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.99 release.
> There are 639 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 26 Jan 2020 09:26:29 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.99-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 
> -------------
> Pseudo-Shortlog of commits:

...

> Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>     PCI: PM: Skip devices in D0 for suspend-to-idle

The above commit is causing a suspend regression on Tegra124 Jetson-TK1.
Reverting this on top of v4.19.99-rc1 fixes the issue.

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.19 000/639] 4.19.99-stable review

[Greg Kroah-Hartman]

On Fri, Jan 24, 2020 at 02:50:05PM +0000, Jon Hunter wrote:
> Hi Greg,
> 
> On 24/01/2020 09:22, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.99 release.
> > There are 639 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun, 26 Jan 2020 09:26:29 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.99-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> > -------------
> > Pseudo-Shortlog of commits:
> 
> ...
> 
> > Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >     PCI: PM: Skip devices in D0 for suspend-to-idle
> 
> The above commit is causing a suspend regression on Tegra124 Jetson-TK1.
> Reverting this on top of v4.19.99-rc1 fixes the issue.

This is also in the 4.14 queue, so should I drop it there too?

thanks,

greg k-h

Re: [PATCH 4.19 000/639] 4.19.99-stable review

[Jon Hunter]

On 24/01/2020 17:36, Greg Kroah-Hartman wrote:
> On Fri, Jan 24, 2020 at 02:50:05PM +0000, Jon Hunter wrote:
>> Hi Greg,
>>
>> On 24/01/2020 09:22, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 4.19.99 release.
>>> There are 639 patches in this series, all will be posted as a response
>>> to this one.  If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Sun, 26 Jan 2020 09:26:29 +0000.
>>> Anything received after that time might be too late.
>>>
>>> The whole patch series can be found in one patch at:
>>> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.99-rc1.gz
>>> or in the git tree and branch at:
>>> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
>>> and the diffstat can be found below.
>>>
>>> thanks,
>>>
>>> greg k-h
>>>
>>> -------------
>>> Pseudo-Shortlog of commits:
>>
>> ...
>>
>>> Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>>     PCI: PM: Skip devices in D0 for suspend-to-idle
>>
>> The above commit is causing a suspend regression on Tegra124 Jetson-TK1.
>> Reverting this on top of v4.19.99-rc1 fixes the issue.
> 
> This is also in the 4.14 queue, so should I drop it there too?

I did not see any failures with the same board on that branch, so I
would say no, but odd that it only fails here. It was failing for me
100% so I would have expected to see if there too if it was a problem.

Jon

-- 
nvpublic

Re: [PATCH 4.19 000/639] 4.19.99-stable review

[Jon Hunter]

On 24/01/2020 18:07, Jon Hunter wrote:
> 
> On 24/01/2020 17:36, Greg Kroah-Hartman wrote:
>> On Fri, Jan 24, 2020 at 02:50:05PM +0000, Jon Hunter wrote:
>>> Hi Greg,
>>>
>>> On 24/01/2020 09:22, Greg Kroah-Hartman wrote:
>>>> This is the start of the stable review cycle for the 4.19.99 release.
>>>> There are 639 patches in this series, all will be posted as a response
>>>> to this one.  If anyone has any issues with these being applied, please
>>>> let me know.
>>>>
>>>> Responses should be made by Sun, 26 Jan 2020 09:26:29 +0000.
>>>> Anything received after that time might be too late.
>>>>
>>>> The whole patch series can be found in one patch at:
>>>> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.99-rc1.gz
>>>> or in the git tree and branch at:
>>>> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
>>>> and the diffstat can be found below.
>>>>
>>>> thanks,
>>>>
>>>> greg k-h
>>>>
>>>> -------------
>>>> Pseudo-Shortlog of commits:
>>>
>>> ...
>>>
>>>> Rafael J. Wysocki <rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
>>>>     PCI: PM: Skip devices in D0 for suspend-to-idle
>>>
>>> The above commit is causing a suspend regression on Tegra124 Jetson-TK1.
>>> Reverting this on top of v4.19.99-rc1 fixes the issue.
>>
>> This is also in the 4.14 queue, so should I drop it there too?
> 
> I did not see any failures with the same board on that branch, so I
> would say no, but odd that it only fails here. It was failing for me
> 100% so I would have expected to see if there too if it was a problem.

Hmmm, rc2 still not working for me ...

Test results for stable-v4.19:
    11 builds:	11 pass, 0 fail
    22 boots:	22 pass, 0 fail
    32 tests:	30 pass, 2 fail

Linux version:	4.19.99-rc2-g24832ad2c623
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

I still see the following commit in rc2 ...

commit bb52152abe85f971278a7a4f033b29483f64bfdb
Author: Rafael J. Wysocki <rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Date:   Thu Jun 13 23:59:45 2019 +0200

    PCI: PM: Skip devices in D0 for suspend-to-idle

BTW, I checked the 4.14. queue and I do not see the above change in
there, however, there is similar change ...

Rafael J. Wysocki <rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
    PCI: PM: Avoid possible suspend-to-idle issue

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.19 000/639] 4.19.99-stable review

[Guenter Roeck]

On 1/25/20 3:32 AM, Jon Hunter wrote:
> 
> On 24/01/2020 18:07, Jon Hunter wrote:
>>
>> On 24/01/2020 17:36, Greg Kroah-Hartman wrote:
>>> On Fri, Jan 24, 2020 at 02:50:05PM +0000, Jon Hunter wrote:
>>>> Hi Greg,
>>>>
>>>> On 24/01/2020 09:22, Greg Kroah-Hartman wrote:
>>>>> This is the start of the stable review cycle for the 4.19.99 release.
>>>>> There are 639 patches in this series, all will be posted as a response
>>>>> to this one.  If anyone has any issues with these being applied, please
>>>>> let me know.
>>>>>
>>>>> Responses should be made by Sun, 26 Jan 2020 09:26:29 +0000.
>>>>> Anything received after that time might be too late.
>>>>>
>>>>> The whole patch series can be found in one patch at:
>>>>> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.99-rc1.gz
>>>>> or in the git tree and branch at:
>>>>> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
>>>>> and the diffstat can be found below.
>>>>>
>>>>> thanks,
>>>>>
>>>>> greg k-h
>>>>>
>>>>> -------------
>>>>> Pseudo-Shortlog of commits:
>>>>
>>>> ...
>>>>
>>>>> Rafael J. Wysocki <rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
>>>>>      PCI: PM: Skip devices in D0 for suspend-to-idle
>>>>
>>>> The above commit is causing a suspend regression on Tegra124 Jetson-TK1.
>>>> Reverting this on top of v4.19.99-rc1 fixes the issue.
>>>
>>> This is also in the 4.14 queue, so should I drop it there too?
>>
>> I did not see any failures with the same board on that branch, so I
>> would say no, but odd that it only fails here. It was failing for me
>> 100% so I would have expected to see if there too if it was a problem.
> 
> Hmmm, rc2 still not working for me ...
> 
> Test results for stable-v4.19:
>      11 builds:	11 pass, 0 fail
>      22 boots:	22 pass, 0 fail
>      32 tests:	30 pass, 2 fail
> 
> Linux version:	4.19.99-rc2-g24832ad2c623
> Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
>                  tegra194-p2972-0000, tegra20-ventana,
>                  tegra210-p2371-2180, tegra30-cardhu-a04
> 
> I still see the following commit in rc2 ...
> 
> commit bb52152abe85f971278a7a4f033b29483f64bfdb
> Author: Rafael J. Wysocki <rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> Date:   Thu Jun 13 23:59:45 2019 +0200
> 
>      PCI: PM: Skip devices in D0 for suspend-to-idle
> 
> BTW, I checked the 4.14. queue and I do not see the above change in
> there, however, there is similar change ...
> 
> Rafael J. Wysocki <rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
>      PCI: PM: Avoid possible suspend-to-idle issue
> 
bb52152abe85 fixes this one, which in turn fixes 33e4f80ee69b.
The above in 4.14 but not its fixes is spelling a bit of trouble.

Maybe commit 471a739a47aa7 ("PCI: PM: Avoid skipping bus-level
PM on platforms without ACPI") was added to -rc2, since it is
supposed to fix bb52152abe85.

Guenter

Re: [PATCH 4.19 000/639] 4.19.99-stable review

[Greg Kroah-Hartman]

On Sat, Jan 25, 2020 at 07:46:47AM -0800, Guenter Roeck wrote:
> On 1/25/20 3:32 AM, Jon Hunter wrote:
> > 
> > On 24/01/2020 18:07, Jon Hunter wrote:
> > > 
> > > On 24/01/2020 17:36, Greg Kroah-Hartman wrote:
> > > > On Fri, Jan 24, 2020 at 02:50:05PM +0000, Jon Hunter wrote:
> > > > > Hi Greg,
> > > > > 
> > > > > On 24/01/2020 09:22, Greg Kroah-Hartman wrote:
> > > > > > This is the start of the stable review cycle for the 4.19.99 release.
> > > > > > There are 639 patches in this series, all will be posted as a response
> > > > > > to this one.  If anyone has any issues with these being applied, please
> > > > > > let me know.
> > > > > > 
> > > > > > Responses should be made by Sun, 26 Jan 2020 09:26:29 +0000.
> > > > > > Anything received after that time might be too late.
> > > > > > 
> > > > > > The whole patch series can be found in one patch at:
> > > > > > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.99-rc1.gz
> > > > > > or in the git tree and branch at:
> > > > > > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> > > > > > and the diffstat can be found below.
> > > > > > 
> > > > > > thanks,
> > > > > > 
> > > > > > greg k-h
> > > > > > 
> > > > > > -------------
> > > > > > Pseudo-Shortlog of commits:
> > > > > 
> > > > > ...
> > > > > 
> > > > > > Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > > > > >      PCI: PM: Skip devices in D0 for suspend-to-idle
> > > > > 
> > > > > The above commit is causing a suspend regression on Tegra124 Jetson-TK1.
> > > > > Reverting this on top of v4.19.99-rc1 fixes the issue.
> > > > 
> > > > This is also in the 4.14 queue, so should I drop it there too?
> > > 
> > > I did not see any failures with the same board on that branch, so I
> > > would say no, but odd that it only fails here. It was failing for me
> > > 100% so I would have expected to see if there too if it was a problem.
> > 
> > Hmmm, rc2 still not working for me ...
> > 
> > Test results for stable-v4.19:
> >      11 builds:	11 pass, 0 fail
> >      22 boots:	22 pass, 0 fail
> >      32 tests:	30 pass, 2 fail
> > 
> > Linux version:	4.19.99-rc2-g24832ad2c623
> > Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
> >                  tegra194-p2972-0000, tegra20-ventana,
> >                  tegra210-p2371-2180, tegra30-cardhu-a04
> > 
> > I still see the following commit in rc2 ...
> > 
> > commit bb52152abe85f971278a7a4f033b29483f64bfdb
> > Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > Date:   Thu Jun 13 23:59:45 2019 +0200
> > 
> >      PCI: PM: Skip devices in D0 for suspend-to-idle

Yes, I did not change anything in -rc2 for you, sorry.

> > BTW, I checked the 4.14. queue and I do not see the above change in
> > there, however, there is similar change ...
> > 
> > Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >      PCI: PM: Avoid possible suspend-to-idle issue
> > 
> bb52152abe85 fixes this one, which in turn fixes 33e4f80ee69b.
> The above in 4.14 but not its fixes is spelling a bit of trouble.
> 
> Maybe commit 471a739a47aa7 ("PCI: PM: Avoid skipping bus-level
> PM on platforms without ACPI") was added to -rc2, since it is
> supposed to fix bb52152abe85.

I have added that fix to 4.14 now, and will go push out a -rc3 for both
4.19.y and 4.14.y to try to sync up on this and figure it out.

Jon, if you could retest 4.14.y, that would be great, to see if it has
the same issue that 4.19.y has.  And if so, that means I should probably
just drop both patches from both trees, right?

thanks,

greg k-h

Re: [PATCH 4.19 000/639] 4.19.99-stable review

[Jon Hunter]

On 26/01/2020 09:13, Greg Kroah-Hartman wrote:
> On Sat, Jan 25, 2020 at 07:46:47AM -0800, Guenter Roeck wrote:
>> On 1/25/20 3:32 AM, Jon Hunter wrote:
>>>
>>> On 24/01/2020 18:07, Jon Hunter wrote:
>>>>
>>>> On 24/01/2020 17:36, Greg Kroah-Hartman wrote:
>>>>> On Fri, Jan 24, 2020 at 02:50:05PM +0000, Jon Hunter wrote:
>>>>>> Hi Greg,
>>>>>>
>>>>>> On 24/01/2020 09:22, Greg Kroah-Hartman wrote:
>>>>>>> This is the start of the stable review cycle for the 4.19.99 release.
>>>>>>> There are 639 patches in this series, all will be posted as a response
>>>>>>> to this one.  If anyone has any issues with these being applied, please
>>>>>>> let me know.
>>>>>>>
>>>>>>> Responses should be made by Sun, 26 Jan 2020 09:26:29 +0000.
>>>>>>> Anything received after that time might be too late.
>>>>>>>
>>>>>>> The whole patch series can be found in one patch at:
>>>>>>> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.99-rc1.gz
>>>>>>> or in the git tree and branch at:
>>>>>>> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
>>>>>>> and the diffstat can be found below.
>>>>>>>
>>>>>>> thanks,
>>>>>>>
>>>>>>> greg k-h
>>>>>>>
>>>>>>> -------------
>>>>>>> Pseudo-Shortlog of commits:
>>>>>>
>>>>>> ...
>>>>>>
>>>>>>> Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>>>>>>      PCI: PM: Skip devices in D0 for suspend-to-idle
>>>>>>
>>>>>> The above commit is causing a suspend regression on Tegra124 Jetson-TK1.
>>>>>> Reverting this on top of v4.19.99-rc1 fixes the issue.
>>>>>
>>>>> This is also in the 4.14 queue, so should I drop it there too?
>>>>
>>>> I did not see any failures with the same board on that branch, so I
>>>> would say no, but odd that it only fails here. It was failing for me
>>>> 100% so I would have expected to see if there too if it was a problem.
>>>
>>> Hmmm, rc2 still not working for me ...
>>>
>>> Test results for stable-v4.19:
>>>      11 builds:	11 pass, 0 fail
>>>      22 boots:	22 pass, 0 fail
>>>      32 tests:	30 pass, 2 fail
>>>
>>> Linux version:	4.19.99-rc2-g24832ad2c623
>>> Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
>>>                  tegra194-p2972-0000, tegra20-ventana,
>>>                  tegra210-p2371-2180, tegra30-cardhu-a04
>>>
>>> I still see the following commit in rc2 ...
>>>
>>> commit bb52152abe85f971278a7a4f033b29483f64bfdb
>>> Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>> Date:   Thu Jun 13 23:59:45 2019 +0200
>>>
>>>      PCI: PM: Skip devices in D0 for suspend-to-idle
> 
> Yes, I did not change anything in -rc2 for you, sorry.
> 
>>> BTW, I checked the 4.14. queue and I do not see the above change in
>>> there, however, there is similar change ...
>>>
>>> Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>>      PCI: PM: Avoid possible suspend-to-idle issue
>>>
>> bb52152abe85 fixes this one, which in turn fixes 33e4f80ee69b.
>> The above in 4.14 but not its fixes is spelling a bit of trouble.
>>
>> Maybe commit 471a739a47aa7 ("PCI: PM: Avoid skipping bus-level
>> PM on platforms without ACPI") was added to -rc2, since it is
>> supposed to fix bb52152abe85.
> 
> I have added that fix to 4.14 now, and will go push out a -rc3 for both
> 4.19.y and 4.14.y to try to sync up on this and figure it out.
> 
> Jon, if you could retest 4.14.y, that would be great, to see if it has
> the same issue that 4.19.y has.  And if so, that means I should probably
> just drop both patches from both trees, right?


So v4.19 is still failing for me ...

Test results for stable-v4.19:
    11 builds:  11 pass, 0 fail
    22 boots:   22 pass, 0 fail
    32 tests:   30 pass, 2 fail

Linux version:  4.19.99-rc3-g041f280e6a1a
Boards tested:  tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

However, I am not seeing any issues with v4.14, so still not clear what
is going on here.

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.19 000/639] 4.19.99-stable review

[Greg Kroah-Hartman]

On Mon, Jan 27, 2020 at 09:38:17AM +0000, Jon Hunter wrote:
> 
> On 26/01/2020 09:13, Greg Kroah-Hartman wrote:
> > On Sat, Jan 25, 2020 at 07:46:47AM -0800, Guenter Roeck wrote:
> >> On 1/25/20 3:32 AM, Jon Hunter wrote:
> >>>
> >>> On 24/01/2020 18:07, Jon Hunter wrote:
> >>>>
> >>>> On 24/01/2020 17:36, Greg Kroah-Hartman wrote:
> >>>>> On Fri, Jan 24, 2020 at 02:50:05PM +0000, Jon Hunter wrote:
> >>>>>> Hi Greg,
> >>>>>>
> >>>>>> On 24/01/2020 09:22, Greg Kroah-Hartman wrote:
> >>>>>>> This is the start of the stable review cycle for the 4.19.99 release.
> >>>>>>> There are 639 patches in this series, all will be posted as a response
> >>>>>>> to this one.  If anyone has any issues with these being applied, please
> >>>>>>> let me know.
> >>>>>>>
> >>>>>>> Responses should be made by Sun, 26 Jan 2020 09:26:29 +0000.
> >>>>>>> Anything received after that time might be too late.
> >>>>>>>
> >>>>>>> The whole patch series can be found in one patch at:
> >>>>>>> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.99-rc1.gz
> >>>>>>> or in the git tree and branch at:
> >>>>>>> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> >>>>>>> and the diffstat can be found below.
> >>>>>>>
> >>>>>>> thanks,
> >>>>>>>
> >>>>>>> greg k-h
> >>>>>>>
> >>>>>>> -------------
> >>>>>>> Pseudo-Shortlog of commits:
> >>>>>>
> >>>>>> ...
> >>>>>>
> >>>>>>> Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >>>>>>>      PCI: PM: Skip devices in D0 for suspend-to-idle
> >>>>>>
> >>>>>> The above commit is causing a suspend regression on Tegra124 Jetson-TK1.
> >>>>>> Reverting this on top of v4.19.99-rc1 fixes the issue.
> >>>>>
> >>>>> This is also in the 4.14 queue, so should I drop it there too?
> >>>>
> >>>> I did not see any failures with the same board on that branch, so I
> >>>> would say no, but odd that it only fails here. It was failing for me
> >>>> 100% so I would have expected to see if there too if it was a problem.
> >>>
> >>> Hmmm, rc2 still not working for me ...
> >>>
> >>> Test results for stable-v4.19:
> >>>      11 builds:	11 pass, 0 fail
> >>>      22 boots:	22 pass, 0 fail
> >>>      32 tests:	30 pass, 2 fail
> >>>
> >>> Linux version:	4.19.99-rc2-g24832ad2c623
> >>> Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
> >>>                  tegra194-p2972-0000, tegra20-ventana,
> >>>                  tegra210-p2371-2180, tegra30-cardhu-a04
> >>>
> >>> I still see the following commit in rc2 ...
> >>>
> >>> commit bb52152abe85f971278a7a4f033b29483f64bfdb
> >>> Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >>> Date:   Thu Jun 13 23:59:45 2019 +0200
> >>>
> >>>      PCI: PM: Skip devices in D0 for suspend-to-idle
> > 
> > Yes, I did not change anything in -rc2 for you, sorry.
> > 
> >>> BTW, I checked the 4.14. queue and I do not see the above change in
> >>> there, however, there is similar change ...
> >>>
> >>> Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >>>      PCI: PM: Avoid possible suspend-to-idle issue
> >>>
> >> bb52152abe85 fixes this one, which in turn fixes 33e4f80ee69b.
> >> The above in 4.14 but not its fixes is spelling a bit of trouble.
> >>
> >> Maybe commit 471a739a47aa7 ("PCI: PM: Avoid skipping bus-level
> >> PM on platforms without ACPI") was added to -rc2, since it is
> >> supposed to fix bb52152abe85.
> > 
> > I have added that fix to 4.14 now, and will go push out a -rc3 for both
> > 4.19.y and 4.14.y to try to sync up on this and figure it out.
> > 
> > Jon, if you could retest 4.14.y, that would be great, to see if it has
> > the same issue that 4.19.y has.  And if so, that means I should probably
> > just drop both patches from both trees, right?
> 
> 
> So v4.19 is still failing for me ...
> 
> Test results for stable-v4.19:
>     11 builds:  11 pass, 0 fail
>     22 boots:   22 pass, 0 fail
>     32 tests:   30 pass, 2 fail
> 
> Linux version:  4.19.99-rc3-g041f280e6a1a
> Boards tested:  tegra124-jetson-tk1, tegra186-p2771-0000,
>                 tegra194-p2972-0000, tegra20-ventana,
>                 tegra210-p2371-2180, tegra30-cardhu-a04
> 
> However, I am not seeing any issues with v4.14, so still not clear what
> is going on here.

Ugh, odd.  Ok, I'll go drop both patches from both trees and do some
releases in a few hours and then try adding them back so we can do a bit
more debugging without the deadline of the release being on us.

thanks so much for letting me know!

greg k-h