From: Niklas Neronin <niklas.neronin@linux.intel.com>
To: mathias.nyman@linux.intel.com
Cc: linux-usb@vger.kernel.org,
Niklas Neronin <niklas.neronin@linux.intel.com>
Subject: [PATCH 21/22] usb: xhci: move struct 'xhci_port' specific macro
Date: Mon, 13 Jul 2026 12:47:35 +0200 [thread overview]
Message-ID: <20260713104738.629612-22-niklas.neronin@linux.intel.com> (raw)
In-Reply-To: <20260713104738.629612-1-niklas.neronin@linux.intel.com>
This macro is not for a USB Port Register, rather specific macro for
struct 'xhci_port'. Because xhci-port.h contains only xHCI specification
macros, move 'DUPLICATE_ENTRY' macro out of xhci-port.h.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
---
drivers/usb/host/xhci-port.h | 3 ---
drivers/usb/host/xhci.h | 3 +++
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/xhci-port.h b/drivers/usb/host/xhci-port.h
index 7ec67924cace..f190fd9b720a 100644
--- a/drivers/usb/host/xhci-port.h
+++ b/drivers/usb/host/xhci-port.h
@@ -131,9 +131,6 @@
/* Writing 1 sets the bit, writing 0 clears the bit. */
#define PORTSC_RW_BITS (PORT_LWS)
-/* We mark duplicate entries with -1 */
-#define DUPLICATE_ENTRY ((u8)(-1))
-
/* USB3 Port Power Management Status and Control (PORTPMSC) 5.4.9.1 */
/*
* bits 7:0 - U1 Timeout, inactivity timer value for transitions into U1.
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 2d74b643aa11..ff0d2546bc0e 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1483,6 +1483,9 @@ struct xhci_port_cap {
u32 protocol_caps;
};
+/* We mark duplicate 'hcd_portnum' entries with -1 */
+#define DUPLICATE_ENTRY ((u8)(-1))
+
struct xhci_port {
struct xhci_port_regs __iomem *port_reg;
int hw_portnum;
--
2.50.1
next prev parent reply other threads:[~2026-07-13 10:49 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-13 10:47 [PATCH 00/22] usb: xhci: rework xHCI Port macros Niklas Neronin
2026-07-13 10:47 ` [PATCH 01/22] usb: xhci: replace bit shifts with the BIT() macro in xhci-port.h Niklas Neronin
2026-07-13 10:47 ` [PATCH 02/22] usb: xhci: rework Port Speed macros Niklas Neronin
2026-07-13 10:47 ` [PATCH 03/22] usb: xhci: rework Port Link State macros Niklas Neronin
2026-07-13 10:47 ` [PATCH 04/22] usb: xhci: rework Port Indicator Control macro Niklas Neronin
2026-07-13 10:47 ` [PATCH 05/22] usb: xhci: rework USB3 PORTPMSC macros Niklas Neronin
2026-07-13 10:47 ` [PATCH 06/22] usb: xhci: rework USB2 " Niklas Neronin
2026-07-13 10:47 ` [PATCH 07/22] usb: xhci: rework USB3 PORTLI macros Niklas Neronin
2026-07-13 10:47 ` [PATCH 08/22] usb: xhci: rework USB2 " Niklas Neronin
2026-07-13 10:47 ` [PATCH 09/22] usb: xhci: rework USB3 PORTHLPMC macros Niklas Neronin
2026-07-13 10:47 ` [PATCH 10/22] usb: xhci: rework USB2 " Niklas Neronin
2026-07-13 10:47 ` [PATCH 11/22] usb: xhci: update port register bitfield comments for consistency Niklas Neronin
2026-07-13 10:47 ` [PATCH 12/22] usb: xhci: rename port register macros to xHCI spec abbreviations Niklas Neronin
2026-07-13 10:47 ` [PATCH 13/22] usb: xhci: replace magic numbers with Port macros Niklas Neronin
2026-07-13 10:47 ` [PATCH 14/22] usb: xhci: update PORTSC aggregate macros Niklas Neronin
2026-07-13 10:47 ` [PATCH 15/22] usb: xhci: consolidate PORTSC RW1CS bit macros Niklas Neronin
2026-07-13 10:47 ` [PATCH 16/22] usb: xhci: relocate all port register macros to xhci-port.h Niklas Neronin
2026-07-13 10:47 ` [PATCH 17/22] usb: xhci: preserve RW bits in xhci_port_state_to_neutral() Niklas Neronin
2026-07-13 10:47 ` [PATCH 18/22] usb: xhci: improve xhci_port_missing_cas_quirk() Niklas Neronin
2026-07-13 10:47 ` [PATCH 19/22] usb: xhci: use neutral helper when resuming ports Niklas Neronin
2026-07-13 10:47 ` [PATCH 20/22] usb: xhci: remove redundant PORTSC ops in xhci_hub_control() Niklas Neronin
2026-07-13 10:47 ` Niklas Neronin [this message]
2026-07-13 10:47 ` [PATCH 22/22] usb: xhci: rename 'temp' PORTSC variables to 'portcs' Niklas Neronin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260713104738.629612-22-niklas.neronin@linux.intel.com \
--to=niklas.neronin@linux.intel.com \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox