From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH 00/29] wl12xx: start preparing the driver for multi-vif support
Date: Wed, 5 Oct 2011 11:55:37 +0200 [thread overview]
Message-ID: <1317808566-18857-1-git-send-email-eliad@wizery.com> (raw)
The wl12xx fw currently supports only a single vif at a time.
Upcoming fw versions are going to support concurrentl vifs.
While mac80211 works well with multiple vifs, the wl12xx
driver assumes it handles only a single interface.
This is the first patchset in order to make the driver ready
for multiple vifs support. The main action here is defining
a new per-interface data struct (wlvif), and moving the
currently-global fields into it.
(Additional global fields/flags will be addressed by further patchsets)
Note that this patchset only adds functionality - it doesn't
break compatability with the current fw.
Eliad Peller (29):
wl12xx: disable AP-mode-specific quirks
wl12xx: replace wl->mac_addr with vif->addr
wl12xx: start reworking the init sequence
wl12xx: define wl12xx_vif
wl12xx: move rate_set into wlvif
wl12xx: move basic_rate into wlvif
wl12xx: replace wl->bssid with vif->bss_conf.bssid
wl12xx: move bss_type into wlvif
wl12xx: remove set_bss_type field
wl12xx: move p2p into wlvif
wl12xx: move ssid and ssid_len into wlvif
wl12xx: move probereq into wlvif
wl12xx: move aid into wlvif
wl12xx: move role_id into wlvif
wl12xx: move dev_role_id into wlvif
wl12xx: move sta_hlid into wlvif
wl12xx: move ap_global_hlid and ap_bcast_hlid into wlvif
wl12xx: move session_counter into wlvif
wl12xx: move some logic into wl12xx_init_vif_data
wl12xx: move dev_hlid into wlvif
wl12xx: move beacon_int into wlvif
wl12xx: move default_key into wlvif
wl12xx: move pspoll_work into wlvif
wl12xx: move ps_compl into wlvif
wl12xx: move ps_poll_failures and psm_entry_retry into wlvif
wl12xx: move rssi_thold and last_rssi_event into wlvif
wl12xx: move ba fields into wlvif
wl12xx: move ap_hlid_map into wlvif.ap
wl12xx: move recorded_ap_keys into wlvif
drivers/net/wireless/wl12xx/acx.c | 138 ++++---
drivers/net/wireless/wl12xx/acx.h | 75 ++--
drivers/net/wireless/wl12xx/boot.c | 3 -
drivers/net/wireless/wl12xx/cmd.c | 231 ++++++-----
drivers/net/wireless/wl12xx/cmd.h | 42 ++-
drivers/net/wireless/wl12xx/debugfs.c | 23 +-
drivers/net/wireless/wl12xx/event.c | 103 +++--
drivers/net/wireless/wl12xx/event.h | 3 -
drivers/net/wireless/wl12xx/init.c | 413 ++++++++++---------
drivers/net/wireless/wl12xx/init.h | 7 +-
drivers/net/wireless/wl12xx/main.c | 754 +++++++++++++++++---------------
drivers/net/wireless/wl12xx/ps.c | 14 +-
drivers/net/wireless/wl12xx/ps.h | 4 +-
drivers/net/wireless/wl12xx/rx.c | 4 +-
drivers/net/wireless/wl12xx/scan.c | 59 ++-
drivers/net/wireless/wl12xx/scan.h | 8 +-
drivers/net/wireless/wl12xx/tx.c | 165 ++++---
drivers/net/wireless/wl12xx/tx.h | 7 +-
drivers/net/wireless/wl12xx/wl12xx.h | 170 ++++----
19 files changed, 1204 insertions(+), 1019 deletions(-)
--
1.7.6.401.g6a319
next reply other threads:[~2011-10-05 9:55 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-05 9:55 Eliad Peller [this message]
2011-10-05 9:55 ` [PATCH 01/29] wl12xx: disable AP-mode-specific quirks Eliad Peller
2011-10-05 9:55 ` [PATCH 02/29] wl12xx: replace wl->mac_addr with vif->addr Eliad Peller
2011-10-05 9:55 ` [PATCH 03/29] wl12xx: start reworking the init sequence Eliad Peller
2011-10-05 9:55 ` [PATCH 04/29] wl12xx: define wl12xx_vif Eliad Peller
2011-10-05 9:55 ` [PATCH 05/29] wl12xx: move rate_set into wlvif Eliad Peller
2011-10-05 9:55 ` [PATCH 06/29] wl12xx: move basic_rate " Eliad Peller
2011-10-05 9:55 ` [PATCH 07/29] wl12xx: replace wl->bssid with vif->bss_conf.bssid Eliad Peller
2011-10-05 9:55 ` [PATCH 08/29] wl12xx: move bss_type into wlvif Eliad Peller
2011-10-05 9:55 ` [PATCH 09/29] wl12xx: remove set_bss_type field Eliad Peller
2011-10-05 9:55 ` [PATCH 10/29] wl12xx: move p2p into wlvif Eliad Peller
2011-10-05 9:55 ` [PATCH 11/29] wl12xx: move ssid and ssid_len " Eliad Peller
2011-10-05 9:55 ` [PATCH 12/29] wl12xx: move probereq " Eliad Peller
2011-10-05 9:55 ` [PATCH 13/29] wl12xx: move aid " Eliad Peller
2011-10-05 9:55 ` [PATCH 14/29] wl12xx: move role_id " Eliad Peller
2011-10-05 9:55 ` [PATCH 15/29] wl12xx: move dev_role_id " Eliad Peller
2011-10-05 9:55 ` [PATCH 16/29] wl12xx: move sta_hlid " Eliad Peller
2011-10-05 9:55 ` [PATCH 17/29] wl12xx: move ap_global_hlid and ap_bcast_hlid " Eliad Peller
2011-10-05 9:55 ` [PATCH 18/29] wl12xx: move session_counter " Eliad Peller
2011-10-05 9:55 ` [PATCH 19/29] wl12xx: move some logic into wl12xx_init_vif_data Eliad Peller
2011-10-05 9:55 ` [PATCH 20/29] wl12xx: move dev_hlid into wlvif Eliad Peller
2011-10-05 9:55 ` [PATCH 21/29] wl12xx: move beacon_int " Eliad Peller
2011-10-05 9:55 ` [PATCH 22/29] wl12xx: move default_key " Eliad Peller
2011-10-05 9:56 ` [PATCH 23/29] wl12xx: move pspoll_work " Eliad Peller
2011-10-05 9:56 ` [PATCH 24/29] wl12xx: move ps_compl " Eliad Peller
2011-10-05 9:56 ` [PATCH 25/29] wl12xx: move ps_poll_failures and psm_entry_retry " Eliad Peller
2011-10-05 9:56 ` [PATCH 26/29] wl12xx: move rssi_thold and last_rssi_event " Eliad Peller
2011-10-05 9:56 ` [PATCH 27/29] wl12xx: move ba fields " Eliad Peller
2011-10-05 9:56 ` [PATCH 28/29] wl12xx: move ap_hlid_map into wlvif.ap Eliad Peller
2011-10-05 9:56 ` [PATCH 29/29] wl12xx: move recorded_ap_keys into wlvif Eliad Peller
2011-10-06 13:18 ` [PATCH 00/29] wl12xx: start preparing the driver for multi-vif support Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1317808566-18857-1-git-send-email-eliad@wizery.com \
--to=eliad@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox