From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH 09/29] wl12xx: remove set_bss_type field
Date: Wed, 5 Oct 2011 11:55:46 +0200 [thread overview]
Message-ID: <1317808566-18857-10-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1317808566-18857-1-git-send-email-eliad@wizery.com>
set_bss_type is no longer evaluated, so delete it.
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/wl12xx/main.c | 8 --------
drivers/net/wireless/wl12xx/wl12xx.h | 1 -
2 files changed, 0 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index fd14cdd..f57a133 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1894,11 +1894,9 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
/* fall-through */
case NL80211_IFTYPE_STATION:
wlvif->bss_type = BSS_TYPE_STA_BSS;
- wl->set_bss_type = BSS_TYPE_STA_BSS;
break;
case NL80211_IFTYPE_ADHOC:
wlvif->bss_type = BSS_TYPE_IBSS;
- wl->set_bss_type = BSS_TYPE_STA_BSS;
break;
case NL80211_IFTYPE_P2P_GO:
wl->p2p = 1;
@@ -2107,7 +2105,6 @@ deinit:
memset(wl->ssid, 0, IEEE80211_MAX_SSID_LEN + 1);
wl->ssid_len = 0;
- wl->set_bss_type = MAX_BSS_TYPE;
wl->p2p = 0;
wl->band = IEEE80211_BAND_2GHZ;
@@ -3434,10 +3431,6 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
wl1271_debug(DEBUG_ADHOC, "ad-hoc beaconing: %s",
bss_conf->enable_beacon ? "enabled" : "disabled");
- if (bss_conf->enable_beacon)
- wl->set_bss_type = BSS_TYPE_IBSS;
- else
- wl->set_bss_type = BSS_TYPE_STA_BSS;
do_join = true;
}
@@ -4817,7 +4810,6 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
wl->flags = 0;
wl->sg_enabled = true;
wl->hw_pg_ver = -1;
- wl->set_bss_type = MAX_BSS_TYPE;
wl->last_tx_hlid = 0;
wl->ap_ps_map = 0;
wl->ap_fw_ps_map = 0;
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index e38fba1..6269c08 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -399,7 +399,6 @@ struct wl1271 {
s8 hw_pg_ver;
u8 mac_addr[ETH_ALEN];
- u8 set_bss_type;
u8 p2p; /* we are using p2p role */
u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
u8 ssid_len;
--
1.7.6.401.g6a319
next prev parent reply other threads:[~2011-10-05 9:55 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-05 9:55 [PATCH 00/29] wl12xx: start preparing the driver for multi-vif support Eliad Peller
2011-10-05 9:55 ` [PATCH 01/29] wl12xx: disable AP-mode-specific quirks Eliad Peller
2011-10-05 9:55 ` [PATCH 02/29] wl12xx: replace wl->mac_addr with vif->addr Eliad Peller
2011-10-05 9:55 ` [PATCH 03/29] wl12xx: start reworking the init sequence Eliad Peller
2011-10-05 9:55 ` [PATCH 04/29] wl12xx: define wl12xx_vif Eliad Peller
2011-10-05 9:55 ` [PATCH 05/29] wl12xx: move rate_set into wlvif Eliad Peller
2011-10-05 9:55 ` [PATCH 06/29] wl12xx: move basic_rate " Eliad Peller
2011-10-05 9:55 ` [PATCH 07/29] wl12xx: replace wl->bssid with vif->bss_conf.bssid Eliad Peller
2011-10-05 9:55 ` [PATCH 08/29] wl12xx: move bss_type into wlvif Eliad Peller
2011-10-05 9:55 ` Eliad Peller [this message]
2011-10-05 9:55 ` [PATCH 10/29] wl12xx: move p2p " Eliad Peller
2011-10-05 9:55 ` [PATCH 11/29] wl12xx: move ssid and ssid_len " Eliad Peller
2011-10-05 9:55 ` [PATCH 12/29] wl12xx: move probereq " Eliad Peller
2011-10-05 9:55 ` [PATCH 13/29] wl12xx: move aid " Eliad Peller
2011-10-05 9:55 ` [PATCH 14/29] wl12xx: move role_id " Eliad Peller
2011-10-05 9:55 ` [PATCH 15/29] wl12xx: move dev_role_id " Eliad Peller
2011-10-05 9:55 ` [PATCH 16/29] wl12xx: move sta_hlid " Eliad Peller
2011-10-05 9:55 ` [PATCH 17/29] wl12xx: move ap_global_hlid and ap_bcast_hlid " Eliad Peller
2011-10-05 9:55 ` [PATCH 18/29] wl12xx: move session_counter " Eliad Peller
2011-10-05 9:55 ` [PATCH 19/29] wl12xx: move some logic into wl12xx_init_vif_data Eliad Peller
2011-10-05 9:55 ` [PATCH 20/29] wl12xx: move dev_hlid into wlvif Eliad Peller
2011-10-05 9:55 ` [PATCH 21/29] wl12xx: move beacon_int " Eliad Peller
2011-10-05 9:55 ` [PATCH 22/29] wl12xx: move default_key " Eliad Peller
2011-10-05 9:56 ` [PATCH 23/29] wl12xx: move pspoll_work " Eliad Peller
2011-10-05 9:56 ` [PATCH 24/29] wl12xx: move ps_compl " Eliad Peller
2011-10-05 9:56 ` [PATCH 25/29] wl12xx: move ps_poll_failures and psm_entry_retry " Eliad Peller
2011-10-05 9:56 ` [PATCH 26/29] wl12xx: move rssi_thold and last_rssi_event " Eliad Peller
2011-10-05 9:56 ` [PATCH 27/29] wl12xx: move ba fields " Eliad Peller
2011-10-05 9:56 ` [PATCH 28/29] wl12xx: move ap_hlid_map into wlvif.ap Eliad Peller
2011-10-05 9:56 ` [PATCH 29/29] wl12xx: move recorded_ap_keys into wlvif Eliad Peller
2011-10-06 13:18 ` [PATCH 00/29] wl12xx: start preparing the driver for multi-vif support Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1317808566-18857-10-git-send-email-eliad@wizery.com \
--to=eliad@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox