From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH 13/29] wl12xx: move aid into wlvif
Date: Wed, 5 Oct 2011 11:55:50 +0200 [thread overview]
Message-ID: <1317808566-18857-14-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1317808566-18857-1-git-send-email-eliad@wizery.com>
move aid into the per-interface data, rather than
being global.
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/wl12xx/main.c | 8 ++++----
drivers/net/wireless/wl12xx/wl12xx.h | 6 +++---
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 3686109..4a35523 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2217,7 +2217,7 @@ static int wl1271_join(struct wl1271 *wl, struct wl12xx_vif *wlvif,
if (ret < 0)
goto out;
- ret = wl1271_acx_aid(wl, wl->aid);
+ ret = wl1271_acx_aid(wl, wlvif->aid);
if (ret < 0)
goto out;
@@ -3482,7 +3482,7 @@ sta_not_found:
if (bss_conf->assoc) {
u32 rates;
int ieoffset;
- wl->aid = bss_conf->aid;
+ wlvif->aid = bss_conf->aid;
set_assoc = true;
wl->ps_poll_failures = 0;
@@ -3513,7 +3513,7 @@ sta_not_found:
* updates it by itself when the first beacon is
* received after a join.
*/
- ret = wl1271_cmd_build_ps_poll(wl, wlvif, wl->aid);
+ ret = wl1271_cmd_build_ps_poll(wl, wlvif, wlvif->aid);
if (ret < 0)
goto out;
@@ -3539,7 +3539,7 @@ sta_not_found:
bool was_ifup =
!!test_and_clear_bit(WL1271_FLAG_STA_STATE_SENT,
&wl->flags);
- wl->aid = 0;
+ wlvif->aid = 0;
/* free probe-request template */
dev_kfree_skb(wlvif->probereq);
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 81d3839..4ca483f 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -506,9 +506,6 @@ struct wl1271 {
bool sched_scanning;
- /* Our association ID */
- u16 aid;
-
u32 bitrate_masks[IEEE80211_NUM_BANDS];
/* The current band */
@@ -640,6 +637,9 @@ struct wl12xx_vif {
/* probe-req template for the current AP */
struct sk_buff *probereq;
+
+ /* Our association ID */
+ u16 aid;
};
static inline struct wl12xx_vif *wl12xx_vif_to_data(struct ieee80211_vif *vif)
--
1.7.6.401.g6a319
next prev parent reply other threads:[~2011-10-05 9:56 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-05 9:55 [PATCH 00/29] wl12xx: start preparing the driver for multi-vif support Eliad Peller
2011-10-05 9:55 ` [PATCH 01/29] wl12xx: disable AP-mode-specific quirks Eliad Peller
2011-10-05 9:55 ` [PATCH 02/29] wl12xx: replace wl->mac_addr with vif->addr Eliad Peller
2011-10-05 9:55 ` [PATCH 03/29] wl12xx: start reworking the init sequence Eliad Peller
2011-10-05 9:55 ` [PATCH 04/29] wl12xx: define wl12xx_vif Eliad Peller
2011-10-05 9:55 ` [PATCH 05/29] wl12xx: move rate_set into wlvif Eliad Peller
2011-10-05 9:55 ` [PATCH 06/29] wl12xx: move basic_rate " Eliad Peller
2011-10-05 9:55 ` [PATCH 07/29] wl12xx: replace wl->bssid with vif->bss_conf.bssid Eliad Peller
2011-10-05 9:55 ` [PATCH 08/29] wl12xx: move bss_type into wlvif Eliad Peller
2011-10-05 9:55 ` [PATCH 09/29] wl12xx: remove set_bss_type field Eliad Peller
2011-10-05 9:55 ` [PATCH 10/29] wl12xx: move p2p into wlvif Eliad Peller
2011-10-05 9:55 ` [PATCH 11/29] wl12xx: move ssid and ssid_len " Eliad Peller
2011-10-05 9:55 ` [PATCH 12/29] wl12xx: move probereq " Eliad Peller
2011-10-05 9:55 ` Eliad Peller [this message]
2011-10-05 9:55 ` [PATCH 14/29] wl12xx: move role_id " Eliad Peller
2011-10-05 9:55 ` [PATCH 15/29] wl12xx: move dev_role_id " Eliad Peller
2011-10-05 9:55 ` [PATCH 16/29] wl12xx: move sta_hlid " Eliad Peller
2011-10-05 9:55 ` [PATCH 17/29] wl12xx: move ap_global_hlid and ap_bcast_hlid " Eliad Peller
2011-10-05 9:55 ` [PATCH 18/29] wl12xx: move session_counter " Eliad Peller
2011-10-05 9:55 ` [PATCH 19/29] wl12xx: move some logic into wl12xx_init_vif_data Eliad Peller
2011-10-05 9:55 ` [PATCH 20/29] wl12xx: move dev_hlid into wlvif Eliad Peller
2011-10-05 9:55 ` [PATCH 21/29] wl12xx: move beacon_int " Eliad Peller
2011-10-05 9:55 ` [PATCH 22/29] wl12xx: move default_key " Eliad Peller
2011-10-05 9:56 ` [PATCH 23/29] wl12xx: move pspoll_work " Eliad Peller
2011-10-05 9:56 ` [PATCH 24/29] wl12xx: move ps_compl " Eliad Peller
2011-10-05 9:56 ` [PATCH 25/29] wl12xx: move ps_poll_failures and psm_entry_retry " Eliad Peller
2011-10-05 9:56 ` [PATCH 26/29] wl12xx: move rssi_thold and last_rssi_event " Eliad Peller
2011-10-05 9:56 ` [PATCH 27/29] wl12xx: move ba fields " Eliad Peller
2011-10-05 9:56 ` [PATCH 28/29] wl12xx: move ap_hlid_map into wlvif.ap Eliad Peller
2011-10-05 9:56 ` [PATCH 29/29] wl12xx: move recorded_ap_keys into wlvif Eliad Peller
2011-10-06 13:18 ` [PATCH 00/29] wl12xx: start preparing the driver for multi-vif support Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1317808566-18857-14-git-send-email-eliad@wizery.com \
--to=eliad@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox