From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH 25/29] wl12xx: move ps_poll_failures and psm_entry_retry into wlvif
Date: Wed, 5 Oct 2011 11:56:02 +0200 [thread overview]
Message-ID: <1317808566-18857-26-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1317808566-18857-1-git-send-email-eliad@wizery.com>
move ps_poll_failures and psm_entry_retries into the per-interface
data, rather than being global.
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/wl12xx/debugfs.c | 2 --
drivers/net/wireless/wl12xx/event.c | 14 +++++++-------
drivers/net/wireless/wl12xx/main.c | 4 +---
drivers/net/wireless/wl12xx/wl12xx.h | 12 ++++++------
4 files changed, 14 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index 439db1f..cd390e0 100644
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -351,8 +351,6 @@ static ssize_t driver_state_read(struct file *file, char __user *user_buf,
DRIVER_STATE_PRINT_INT(state);
DRIVER_STATE_PRINT_INT(channel);
DRIVER_STATE_PRINT_INT(band);
- DRIVER_STATE_PRINT_INT(psm_entry_retry);
- DRIVER_STATE_PRINT_INT(ps_poll_failures);
DRIVER_STATE_PRINT_INT(power_level);
DRIVER_STATE_PRINT_INT(rssi_thold);
DRIVER_STATE_PRINT_INT(last_rssi_event);
diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
index fac4eae..31cb43e 100644
--- a/drivers/net/wireless/wl12xx/event.c
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -78,8 +78,8 @@ static void wl1271_event_pspoll_delivery_fail(struct wl1271 *wl,
int delay = wl->conf.conn.ps_poll_recovery_period;
int ret;
- wl->ps_poll_failures++;
- if (wl->ps_poll_failures == 1)
+ wlvif->ps_poll_failures++;
+ if (wlvif->ps_poll_failures == 1)
wl1271_info("AP with dysfunctional ps-poll, "
"trying to work around it.");
@@ -118,23 +118,23 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
if (!test_bit(WL1271_FLAG_PSM, &wl->flags)) {
/* remain in active mode */
- wl->psm_entry_retry = 0;
+ wlvif->psm_entry_retry = 0;
break;
}
- if (wl->psm_entry_retry < total_retries) {
- wl->psm_entry_retry++;
+ if (wlvif->psm_entry_retry < total_retries) {
+ wlvif->psm_entry_retry++;
ret = wl1271_ps_set_mode(wl, wlvif,
STATION_POWER_SAVE_MODE,
wlvif->basic_rate, true);
} else {
wl1271_info("No ack to nullfunc from AP.");
- wl->psm_entry_retry = 0;
+ wlvif->psm_entry_retry = 0;
*beacon_loss = true;
}
break;
case EVENT_ENTER_POWER_SAVE_SUCCESS:
- wl->psm_entry_retry = 0;
+ wlvif->psm_entry_retry = 0;
/* enable beacon filtering */
ret = wl1271_acx_beacon_filter_opt(wl, wlvif, true);
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 1d3ed60..20ad35d 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2141,7 +2141,6 @@ deinit:
wl->band = IEEE80211_BAND_2GHZ;
wl->rx_counter = 0;
- wl->psm_entry_retry = 0;
wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
wl->tx_blocks_available = 0;
wl->tx_allocated_blocks = 0;
@@ -3535,7 +3534,7 @@ sta_not_found:
wlvif->aid = bss_conf->aid;
set_assoc = true;
- wl->ps_poll_failures = 0;
+ wlvif->ps_poll_failures = 0;
/*
* use basic rates from AP, and determine lowest rate
@@ -4853,7 +4852,6 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
wl->channel = WL1271_DEFAULT_CHANNEL;
wl->rx_counter = 0;
- wl->psm_entry_retry = 0;
wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
wl->band = IEEE80211_BAND_2GHZ;
wl->vif = NULL;
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index d153b24..5e976ae 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -510,12 +510,6 @@ struct wl1271 {
struct completion *elp_compl;
struct delayed_work elp_work;
- /* counter for ps-poll delivery failures */
- int ps_poll_failures;
-
- /* retry counter for PSM entries */
- u8 psm_entry_retry;
-
/* in dBm */
int power_level;
@@ -651,6 +645,12 @@ struct wl12xx_vif {
struct completion *ps_compl;
struct delayed_work pspoll_work;
+
+ /* counter for ps-poll delivery failures */
+ int ps_poll_failures;
+
+ /* retry counter for PSM entries */
+ u8 psm_entry_retry;
};
static inline struct wl12xx_vif *wl12xx_vif_to_data(struct ieee80211_vif *vif)
--
1.7.6.401.g6a319
next prev parent reply other threads:[~2011-10-05 9:56 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-05 9:55 [PATCH 00/29] wl12xx: start preparing the driver for multi-vif support Eliad Peller
2011-10-05 9:55 ` [PATCH 01/29] wl12xx: disable AP-mode-specific quirks Eliad Peller
2011-10-05 9:55 ` [PATCH 02/29] wl12xx: replace wl->mac_addr with vif->addr Eliad Peller
2011-10-05 9:55 ` [PATCH 03/29] wl12xx: start reworking the init sequence Eliad Peller
2011-10-05 9:55 ` [PATCH 04/29] wl12xx: define wl12xx_vif Eliad Peller
2011-10-05 9:55 ` [PATCH 05/29] wl12xx: move rate_set into wlvif Eliad Peller
2011-10-05 9:55 ` [PATCH 06/29] wl12xx: move basic_rate " Eliad Peller
2011-10-05 9:55 ` [PATCH 07/29] wl12xx: replace wl->bssid with vif->bss_conf.bssid Eliad Peller
2011-10-05 9:55 ` [PATCH 08/29] wl12xx: move bss_type into wlvif Eliad Peller
2011-10-05 9:55 ` [PATCH 09/29] wl12xx: remove set_bss_type field Eliad Peller
2011-10-05 9:55 ` [PATCH 10/29] wl12xx: move p2p into wlvif Eliad Peller
2011-10-05 9:55 ` [PATCH 11/29] wl12xx: move ssid and ssid_len " Eliad Peller
2011-10-05 9:55 ` [PATCH 12/29] wl12xx: move probereq " Eliad Peller
2011-10-05 9:55 ` [PATCH 13/29] wl12xx: move aid " Eliad Peller
2011-10-05 9:55 ` [PATCH 14/29] wl12xx: move role_id " Eliad Peller
2011-10-05 9:55 ` [PATCH 15/29] wl12xx: move dev_role_id " Eliad Peller
2011-10-05 9:55 ` [PATCH 16/29] wl12xx: move sta_hlid " Eliad Peller
2011-10-05 9:55 ` [PATCH 17/29] wl12xx: move ap_global_hlid and ap_bcast_hlid " Eliad Peller
2011-10-05 9:55 ` [PATCH 18/29] wl12xx: move session_counter " Eliad Peller
2011-10-05 9:55 ` [PATCH 19/29] wl12xx: move some logic into wl12xx_init_vif_data Eliad Peller
2011-10-05 9:55 ` [PATCH 20/29] wl12xx: move dev_hlid into wlvif Eliad Peller
2011-10-05 9:55 ` [PATCH 21/29] wl12xx: move beacon_int " Eliad Peller
2011-10-05 9:55 ` [PATCH 22/29] wl12xx: move default_key " Eliad Peller
2011-10-05 9:56 ` [PATCH 23/29] wl12xx: move pspoll_work " Eliad Peller
2011-10-05 9:56 ` [PATCH 24/29] wl12xx: move ps_compl " Eliad Peller
2011-10-05 9:56 ` Eliad Peller [this message]
2011-10-05 9:56 ` [PATCH 26/29] wl12xx: move rssi_thold and last_rssi_event " Eliad Peller
2011-10-05 9:56 ` [PATCH 27/29] wl12xx: move ba fields " Eliad Peller
2011-10-05 9:56 ` [PATCH 28/29] wl12xx: move ap_hlid_map into wlvif.ap Eliad Peller
2011-10-05 9:56 ` [PATCH 29/29] wl12xx: move recorded_ap_keys into wlvif Eliad Peller
2011-10-06 13:18 ` [PATCH 00/29] wl12xx: start preparing the driver for multi-vif support Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1317808566-18857-26-git-send-email-eliad@wizery.com \
--to=eliad@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox