From: Ping-Ke Shih <pkshih@realtek.com>
To: <linux-wireless@vger.kernel.org>
Cc: <ku920601@realtek.com>
Subject: [PATCH rtw-next 03/15] wifi: rtw89: coex: show per-HW-band MLO state in WL status dump
Date: Sun, 4 Oct 2026 11:45:08 +0800 [thread overview]
Message-ID: <20261004034520.33695-4-pkshih@realtek.com> (raw)
In-Reply-To: <20261004034520.33695-1-pkshih@realtek.com>
From: Ching-Te Ku <ku920601@realtek.com>
The WL status debug dump only printed role, channel and link-mode
state for HW-band 0, even on chips where MLO support means both
bands carry an independent connection. Add an [MLO] line that
prints the operating mode, channel type, RF band and P2P-exist
state for each HW-band side by side, gated on the chip actually
supporting MLO so single-band chips keep the shorter dump.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
drivers/net/wireless/realtek/rtw89/coex.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/coex.c b/drivers/net/wireless/realtek/rtw89/coex.c
index 8412c082ddc8..556c35e84043 100644
--- a/drivers/net/wireless/realtek/rtw89/coex.c
+++ b/drivers/net/wireless/realtek/rtw89/coex.c
@@ -10292,6 +10292,7 @@ static int _show_wl_info(struct rtw89_dev *rtwdev, char *buf, size_t bufsz)
struct rtw89_btc_cx *cx = &btc->cx;
struct rtw89_btc_wl_info *wl = &cx->wl;
struct rtw89_btc_wl_role_info *wl_rinfo = &wl->role_info;
+ struct rtw89_btc_wl_mlo_info *wl_minfo = &wl->mlo_info;
char *p = buf, *end = buf + bufsz;
u8 mode;
@@ -10319,6 +10320,25 @@ static int _show_wl_info(struct rtw89_dev *rtwdev, char *buf, size_t bufsz)
wl->status.map._4way ? "Y" : "N",
wl->status.map.init_ok ? "Y" : "N");
+ if (rtwdev->chip->para_ver & BTC_FEAT_MLO_SUPPORT) {
+ p += scnprintf(p, end - p,
+ " %-15s : type:%d/rf_comb:%d/dbcc_en:%d, ",
+ "[MLO]", wl_minfo->wtype, wl_minfo->rf_combination,
+ wl_rinfo->dbcc_en);
+ p += scnprintf(p, end - p,
+ "HWB0(wmode:%d/ch:%d/rf_band:%d/p2p:%d), ",
+ wl_minfo->wmode[RTW89_MAC_0],
+ wl_minfo->ch_type[RTW89_MAC_0],
+ wl_minfo->hwb_rf_band[RTW89_MAC_0],
+ wl_rinfo->p2p_exist[RTW89_MAC_0]);
+ p += scnprintf(p, end - p,
+ "HWB1(wmode:%d/ch:%d/rf_band:%d/p2p:%d)\n",
+ wl_minfo->wmode[RTW89_MAC_1],
+ wl_minfo->ch_type[RTW89_MAC_1],
+ wl_minfo->hwb_rf_band[RTW89_MAC_1],
+ wl_rinfo->p2p_exist[RTW89_MAC_1]);
+ }
+
p += _show_wl_role_info(rtwdev, p, end - p);
return p - buf;
--
2.25.1
next prev parent reply other threads:[~2026-10-04 3:46 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-04 3:45 [PATCH rtw-next 00/15] wifi: rtw89: coex: update BT-coexistence along changes of newer firmware Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 01/15] wifi: rtw89: coex: fix RF band check in _set_rf_trx_para() and its propagation Ping-Ke Shih
2026-10-07 4:19 ` Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 02/15] wifi: rtw89: coex: track per-HW-band WL role fields with arrays Ping-Ke Shih
2026-10-04 3:45 ` Ping-Ke Shih [this message]
2026-10-04 3:45 ` [PATCH rtw-next 04/15] wifi: rtw89: coex: add outsrc-set-info v7 for BT SPDT state Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 05/15] wifi: rtw89: coex: compute WL/BT cross-talk interference maps Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 06/15] wifi: rtw89: coex: add 1SS MIMO-PS decision for dual-BT CIS Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 07/15] wifi: rtw89: coex: add firmware 0.35.119.3 support for RTL8922A/D Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 08/15] wifi: rtw89: coex: raise default BT TX power to 10 dBm Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 09/15] wifi: rtw89: coex: bind the RF band in use while WL is doing RFK Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 10/15] wifi: rtw89: coex: store BT TX power per device and per RF band Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 11/15] wifi: rtw89: coex: set the WL/BT antenna map on shared-antenna chips Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 12/15] wifi: rtw89: coex: use the right switch-type enum on RTL8922D Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 13/15] wifi: rtw89: phy: Implement API to control BTG to turn on/off BT TX/RX Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 14/15] wifi: rtw89: coex: turn BT TX/RX on and off through the BTG control Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 15/15] wifi: rtw89: coex: set rf_combination in _update_wl_mlo_info() Ping-Ke Shih
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261004034520.33695-4-pkshih@realtek.com \
--to=pkshih@realtek.com \
--cc=ku920601@realtek.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox