From: Ping-Ke Shih <pkshih@realtek.com>
To: <linux-wireless@vger.kernel.org>
Cc: <ku920601@realtek.com>
Subject: [PATCH rtw-next 07/15] wifi: rtw89: coex: add firmware 0.35.119.3 support for RTL8922A/D
Date: Sun, 4 Oct 2026 11:45:12 +0800 [thread overview]
Message-ID: <20261004034520.33695-8-pkshih@realtek.com> (raw)
In-Reply-To: <20261004034520.33695-1-pkshih@realtek.com>
From: Ching-Te Ku <ku920601@realtek.com>
Firmware 0.35.119.3 moves both RTL8922A and RTL8922D to coex H2C
role-info version 11 and outsrc-set-info version 7. Add top
ver_defs entries for both chips with the new fwlrole and fcxosi
values; all other scope versions are unchanged from the previous
firmware.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
drivers/net/wireless/realtek/rtw89/coex.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/coex.c b/drivers/net/wireless/realtek/rtw89/coex.c
index 0b9858d1859a..80c278aa96f0 100644
--- a/drivers/net/wireless/realtek/rtw89/coex.c
+++ b/drivers/net/wireless/realtek/rtw89/coex.c
@@ -133,6 +133,15 @@ static const u32 cxtbl[] = {
static const struct rtw89_btc_ver rtw89_btc_ver_defs[] = {
/* firmware version must be in decreasing order for each chip */
+ {RTL8922D, RTW89_FW_VER_CODE(0, 35, 119, 3),
+ .fcxbtcrpt = 11, .fcxtdma = 8, .fcxslots = 7, .fcxcysta = 8,
+ .fcxstep = 7, .fcxnullsta = 7, .fcxmreg = 7, .fcxgpiodbg = 8,
+ .fcxbtver = 8, .fcxbtscan = 8, .fcxbtafh = 8, .fcxbtdevinfo = 8,
+ .fwlrole = 11, .frptmap = 5, .fcxctrl = 9, .fcxinit = 11,
+ .fwevntrptl = 1, .fwc2hfunc = 4, .drvinfo_ver = 3, .info_buf = 1800,
+ .max_role_num = 6, .fcxosi = 7, .fcxmlo = 2, .bt_desired = 8,
+ .fcxtrx = 9, .fcxtxpwr = 1,
+ },
{RTL8922D, RTW89_FW_VER_CODE(0, 35, 111, 0),
.fcxbtcrpt = 11, .fcxtdma = 8, .fcxslots = 7, .fcxcysta = 8,
.fcxstep = 7, .fcxnullsta = 7, .fcxmreg = 7, .fcxgpiodbg = 8,
@@ -178,6 +187,15 @@ static const struct rtw89_btc_ver rtw89_btc_ver_defs[] = {
.max_role_num = 6, .fcxosi = 0, .fcxmlo = 0, .bt_desired = 8,
.fcxtrx = 0, .fcxtxpwr = 0,
},
+ {RTL8922A, RTW89_FW_VER_CODE(0, 35, 119, 3),
+ .fcxbtcrpt = 11, .fcxtdma = 8, .fcxslots = 7, .fcxcysta = 8,
+ .fcxstep = 7, .fcxnullsta = 7, .fcxmreg = 7, .fcxgpiodbg = 8,
+ .fcxbtver = 8, .fcxbtscan = 8, .fcxbtafh = 8, .fcxbtdevinfo = 8,
+ .fwlrole = 11, .frptmap = 5, .fcxctrl = 9, .fcxinit = 11,
+ .fwevntrptl = 1, .fwc2hfunc = 4, .drvinfo_ver = 3, .info_buf = 1800,
+ .max_role_num = 6, .fcxosi = 7, .fcxmlo = 2, .bt_desired = 8,
+ .fcxtrx = 9, .fcxtxpwr = 1,
+ },
{RTL8922A, RTW89_FW_VER_CODE(0, 35, 111, 0),
.fcxbtcrpt = 11, .fcxtdma = 8, .fcxslots = 7, .fcxcysta = 8,
.fcxstep = 7, .fcxnullsta = 7, .fcxmreg = 7, .fcxgpiodbg = 8,
--
2.25.1
next prev parent reply other threads:[~2026-10-04 3:46 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-04 3:45 [PATCH rtw-next 00/15] wifi: rtw89: coex: update BT-coexistence along changes of newer firmware Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 01/15] wifi: rtw89: coex: fix RF band check in _set_rf_trx_para() and its propagation Ping-Ke Shih
2026-10-07 4:19 ` Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 02/15] wifi: rtw89: coex: track per-HW-band WL role fields with arrays Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 03/15] wifi: rtw89: coex: show per-HW-band MLO state in WL status dump Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 04/15] wifi: rtw89: coex: add outsrc-set-info v7 for BT SPDT state Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 05/15] wifi: rtw89: coex: compute WL/BT cross-talk interference maps Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 06/15] wifi: rtw89: coex: add 1SS MIMO-PS decision for dual-BT CIS Ping-Ke Shih
2026-10-04 3:45 ` Ping-Ke Shih [this message]
2026-10-04 3:45 ` [PATCH rtw-next 08/15] wifi: rtw89: coex: raise default BT TX power to 10 dBm Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 09/15] wifi: rtw89: coex: bind the RF band in use while WL is doing RFK Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 10/15] wifi: rtw89: coex: store BT TX power per device and per RF band Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 11/15] wifi: rtw89: coex: set the WL/BT antenna map on shared-antenna chips Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 12/15] wifi: rtw89: coex: use the right switch-type enum on RTL8922D Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 13/15] wifi: rtw89: phy: Implement API to control BTG to turn on/off BT TX/RX Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 14/15] wifi: rtw89: coex: turn BT TX/RX on and off through the BTG control Ping-Ke Shih
2026-10-04 3:45 ` [PATCH rtw-next 15/15] wifi: rtw89: coex: set rf_combination in _update_wl_mlo_info() Ping-Ke Shih
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261004034520.33695-8-pkshih@realtek.com \
--to=pkshih@realtek.com \
--cc=ku920601@realtek.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox