* [PATCH v3 09/20] rt2x00: rt2800lib: fix default TX power values for RT3593
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
The TX power values in the EEPROM are using
a different format for the RT3593 chip. The
default TX power value uses bits 0..4 only.
Bits 5..8 contains value for fine grained
power control. Additionally, the lower and
upper limits of the TX power values are the
same for both bands.
Improve the rt2800_txpower_to_dev function,
in order to compute the correct default power
values for the RT3593 chip as well.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
drivers/net/wireless/rt2x00/rt2800.h | 7 +++++++
drivers/net/wireless/rt2x00/rt2800lib.c | 7 +++++++
2 files changed, 14 insertions(+)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index d3e8f6d..69749ba5 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -2603,6 +2603,10 @@ enum rt2800_eeprom_word {
#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
+/* EEPROM_TXPOWER_{A,G} fields for RT3593 */
+#define EEPROM_TXPOWER_ALC FIELD8(0x1f)
+#define EEPROM_TXPOWER_FINE_CTRL FIELD8(0xe0)
+
/*
* EEPROM temperature compensation boundaries 802.11A
* MINUS4: If the actual TSSI is below this boundary, tx power needs to be
@@ -2884,6 +2888,9 @@ enum rt2800_eeprom_word {
#define MAX_A_TXPOWER 15
#define DEFAULT_TXPOWER 5
+#define MIN_A_TXPOWER_3593 0
+#define MAX_A_TXPOWER_3593 31
+
#define TXPOWER_G_FROM_DEV(__txpower) \
((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 1738a9d..b11f0b0 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2728,8 +2728,15 @@ static char rt2800_txpower_to_dev(struct rt2x00_dev *rt2x00dev,
unsigned int channel,
char txpower)
{
+ if (rt2x00_rt(rt2x00dev, RT3593))
+ txpower = rt2x00_get_field8(txpower, EEPROM_TXPOWER_ALC);
+
if (channel <= 14)
return clamp_t(char, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER);
+
+ if (rt2x00_rt(rt2x00dev, RT3593))
+ return clamp_t(char, txpower, MIN_A_TXPOWER_3593,
+ MAX_A_TXPOWER_3593);
else
return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
}
--
1.7.10
^ permalink raw reply related
* [PATCH v3 14/20] rt2x00: rt2800lib: add rf_vals for RF3053
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.
References:
FreqItems3053 in chips/rt3593.c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
drivers/net/wireless/rt2x00/rt2800lib.c | 70 +++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index e3e652d..5119bf0 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -6961,6 +6961,72 @@ static const struct rf_channel rf_vals_5592_xtal40[] = {
{196, 83, 0, 12, 1},
};
+static const struct rf_channel rf_vals_3053[] = {
+ /* Channel, N, R, K */
+ {1, 241, 2, 2},
+ {2, 241, 2, 7},
+ {3, 242, 2, 2},
+ {4, 242, 2, 7},
+ {5, 243, 2, 2},
+ {6, 243, 2, 7},
+ {7, 244, 2, 2},
+ {8, 244, 2, 7},
+ {9, 245, 2, 2},
+ {10, 245, 2, 7},
+ {11, 246, 2, 2},
+ {12, 246, 2, 7},
+ {13, 247, 2, 2},
+ {14, 248, 2, 4},
+
+ {36, 0x56, 0, 4},
+ {38, 0x56, 0, 6},
+ {40, 0x56, 0, 8},
+ {44, 0x57, 0, 0},
+ {46, 0x57, 0, 2},
+ {48, 0x57, 0, 4},
+ {52, 0x57, 0, 8},
+ {54, 0x57, 0, 10},
+ {56, 0x58, 0, 0},
+ {60, 0x58, 0, 4},
+ {62, 0x58, 0, 6},
+ {64, 0x58, 0, 8},
+
+ {100, 0x5B, 0, 8},
+ {102, 0x5B, 0, 10},
+ {104, 0x5C, 0, 0},
+ {108, 0x5C, 0, 4},
+ {110, 0x5C, 0, 6},
+ {112, 0x5C, 0, 8},
+
+ /* NOTE: Channel 114 has been removed intentionally.
+ * The EEPROM contains no TX power values for that,
+ * and it is disabled in the vendor driver as well.
+ */
+
+ {116, 0x5D, 0, 0},
+ {118, 0x5D, 0, 2},
+ {120, 0x5D, 0, 4},
+ {124, 0x5D, 0, 8},
+ {126, 0x5D, 0, 10},
+ {128, 0x5E, 0, 0},
+ {132, 0x5E, 0, 4},
+ {134, 0x5E, 0, 6},
+ {136, 0x5E, 0, 8},
+ {140, 0x5F, 0, 0},
+
+ {149, 0x5F, 0, 9},
+ {151, 0x5F, 0, 11},
+ {153, 0x60, 0, 1},
+ {157, 0x60, 0, 5},
+ {159, 0x60, 0, 7},
+ {161, 0x60, 0, 9},
+ {165, 0x61, 0, 1},
+ {167, 0x61, 0, 3},
+ {169, 0x61, 0, 5},
+ {171, 0x61, 0, 7},
+ {173, 0x61, 0, 9},
+};
+
static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
@@ -7052,6 +7118,10 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_3x);
spec->channels = rf_vals_3x;
+ } else if (rt2x00_rf(rt2x00dev, RF3053)) {
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
+ spec->num_channels = ARRAY_SIZE(rf_vals_3053);
+ spec->channels = rf_vals_3053;
} else if (rt2x00_rf(rt2x00dev, RF5592)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
--
1.7.10
^ permalink raw reply related
* [PATCH v3 11/20] rt2x00: rt2800lib: hardcode TX mixer gain values for RT3593
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
The reference code uses hardcoded zero TX mixer gain value
for RT3593. Do the same in the rt2x00 driver.
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.
Reference:
NICReadEEPROMParameters in common/rtmp_init.c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
drivers/net/wireless/rt2x00/rt2800lib.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 1f32732..65045e0 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -6365,6 +6365,9 @@ static u8 rt2800_get_txmixer_gain_24g(struct rt2x00_dev *rt2x00dev)
{
u16 word;
+ if (rt2x00_rt(rt2x00dev, RT3593))
+ return 0;
+
rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &word);
if ((word & 0x00ff) != 0x00ff)
return rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_BG_VAL);
@@ -6376,6 +6379,9 @@ static u8 rt2800_get_txmixer_gain_5g(struct rt2x00_dev *rt2x00dev)
{
u16 word;
+ if (rt2x00_rt(rt2x00dev, RT3593))
+ return 0;
+
rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A, &word);
if ((word & 0x00ff) != 0x00ff)
return rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_A_VAL);
--
1.7.10
^ permalink raw reply related
* [PATCH v3 12/20] rt2x00: rt2800lib: fix LNA_A[12] gain values for RT3593
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
The LNA_A[12] gain values are stored at a different
offset in the EEPROM on RT3593 based devices. However
the current code unconditionally reads those values
from the location used by other chipsets.
Fix the code to use the correct EEPROM offset.
Based on the DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.
References:
RT3593_EEPROM_RSSI2_OFFSET_ALNAGAIN1_24G_READ in include/chip/rt3593.h
RT3593_EEPROM_RSSI2_OFFSET_ALNAGAIN2_5G_READ in include/chip/rt3593.h
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2:
- replace 'rt2x00lib' with 'rt2800lib' in subject
---
drivers/net/wireless/rt2x00/rt2800.h | 4 +++
drivers/net/wireless/rt2x00/rt2800lib.c | 55 ++++++++++++++++++++++++-------
2 files changed, 47 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 69749ba5..7688e15 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -2672,6 +2672,10 @@ enum rt2800_eeprom_word {
#define EEPROM_BBP_VALUE FIELD16(0x00ff)
#define EEPROM_BBP_REG_ID FIELD16(0xff00)
+/* EEPROM_EXT_LNA2 */
+#define EEPROM_EXT_LNA2_A1 FIELD16(0x00ff)
+#define EEPROM_EXT_LNA2_A2 FIELD16(0xff00)
+
/*
* EEPROM IQ Calibration, unlike other entries those are byte addresses.
*/
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 65045e0..419ea05 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1826,11 +1826,25 @@ static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev,
rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
} else if (libconf->rf.channel <= 128) {
- rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
- lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
+ if (rt2x00_rt(rt2x00dev, RT3593)) {
+ rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom);
+ lna_gain = rt2x00_get_field16(eeprom,
+ EEPROM_EXT_LNA2_A1);
+ } else {
+ rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
+ lna_gain = rt2x00_get_field16(eeprom,
+ EEPROM_RSSI_BG2_LNA_A1);
+ }
} else {
- rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
- lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
+ if (rt2x00_rt(rt2x00dev, RT3593)) {
+ rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom);
+ lna_gain = rt2x00_get_field16(eeprom,
+ EEPROM_EXT_LNA2_A2);
+ } else {
+ rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
+ lna_gain = rt2x00_get_field16(eeprom,
+ EEPROM_RSSI_A2_LNA_A2);
+ }
}
rt2x00dev->lna_gain = lna_gain;
@@ -6488,10 +6502,12 @@ static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
- if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
- rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
- rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
- default_lna_gain);
+ if (!rt2x00_rt(rt2x00dev, RT3593)) {
+ if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
+ rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
+ default_lna_gain);
+ }
rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
drv_data->txmixer_gain_5g = rt2800_get_txmixer_gain_5g(rt2x00dev);
@@ -6506,12 +6522,27 @@ static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
- if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
- rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
- rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
- default_lna_gain);
+ if (!rt2x00_rt(rt2x00dev, RT3593)) {
+ if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
+ rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
+ default_lna_gain);
+ }
rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
+ if (rt2x00_rt(rt2x00dev, RT3593)) {
+ rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &word);
+ if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0x00 ||
+ rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0xff)
+ rt2x00_set_field16(&word, EEPROM_EXT_LNA2_A1,
+ default_lna_gain);
+ if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A2) == 0x00 ||
+ rt2x00_get_field16(word, EEPROM_EXT_LNA2_A2) == 0xff)
+ rt2x00_set_field16(&word, EEPROM_EXT_LNA2_A1,
+ default_lna_gain);
+ rt2800_eeprom_write(rt2x00dev, EEPROM_EXT_LNA2, word);
+ }
+
return 0;
}
--
1.7.10
^ permalink raw reply related
* [PATCH v3 08/20] rt2x00: rt2800lib: add rt2800_txpower_to_dev helper
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
Introduce a new helper function for converting
the default TX power values from EEPROM into
mac80211 values.
The change improves the readability and it makes
it easier to add support for other chipsets.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
drivers/net/wireless/rt2x00/rt2800.h | 6 ------
drivers/net/wireless/rt2x00/rt2800lib.c | 21 ++++++++++++++-------
2 files changed, 14 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 7b7caeb..d3e8f6d 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -2887,15 +2887,9 @@ enum rt2800_eeprom_word {
#define TXPOWER_G_FROM_DEV(__txpower) \
((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-#define TXPOWER_G_TO_DEV(__txpower) \
- clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER)
-
#define TXPOWER_A_FROM_DEV(__txpower) \
((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-#define TXPOWER_A_TO_DEV(__txpower) \
- clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
-
/*
* Board's maximun TX power limitation
*/
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 958215c..1738a9d 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2724,6 +2724,16 @@ static void rt2800_iq_calibrate(struct rt2x00_dev *rt2x00dev, int channel)
rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0);
}
+static char rt2800_txpower_to_dev(struct rt2x00_dev *rt2x00dev,
+ unsigned int channel,
+ char txpower)
+{
+ if (channel <= 14)
+ return clamp_t(char, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER);
+ else
+ return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
+}
+
static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
struct ieee80211_conf *conf,
struct rf_channel *rf,
@@ -2733,13 +2743,10 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
unsigned int tx_pin;
u8 bbp, rfcsr;
- if (rf->channel <= 14) {
- info->default_power1 = TXPOWER_G_TO_DEV(info->default_power1);
- info->default_power2 = TXPOWER_G_TO_DEV(info->default_power2);
- } else {
- info->default_power1 = TXPOWER_A_TO_DEV(info->default_power1);
- info->default_power2 = TXPOWER_A_TO_DEV(info->default_power2);
- }
+ info->default_power1 = rt2800_txpower_to_dev(rt2x00dev, rf->channel,
+ info->default_power1);
+ info->default_power2 = rt2800_txpower_to_dev(rt2x00dev, rf->channel,
+ info->default_power2);
switch (rt2x00dev->chip.rf) {
case RF2020:
--
1.7.10
^ permalink raw reply related
* [PATCH v3 04/20] rt2x00: rt2800lib: add BBP post initialization for RT3593
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.
Reference:
RT3593_PostBBPInitialization in chips/rt3553.c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
drivers/net/wireless/rt2x00/rt2800lib.c | 48 ++++++++++++++++++++++++++++++-
1 file changed, 47 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index b650569..7b5c593 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -5381,6 +5381,52 @@ static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev)
rt2800_normal_mode_setup_3xxx(rt2x00dev);
}
+static void rt3593_post_bbp_init(struct rt2x00_dev *rt2x00dev)
+{
+ u8 bbp;
+ bool txbf_enabled = false; /* FIXME */
+
+ rt2800_bbp_read(rt2x00dev, 105, &bbp);
+ if (rt2x00dev->default_ant.rx_chain_num == 1)
+ rt2x00_set_field8(&bbp, BBP105_MLD, 0);
+ else
+ rt2x00_set_field8(&bbp, BBP105_MLD, 1);
+ rt2800_bbp_write(rt2x00dev, 105, bbp);
+
+ rt2800_bbp4_mac_if_ctrl(rt2x00dev);
+
+ rt2800_bbp_write(rt2x00dev, 92, 0x02);
+ rt2800_bbp_write(rt2x00dev, 82, 0x82);
+ rt2800_bbp_write(rt2x00dev, 106, 0x05);
+ rt2800_bbp_write(rt2x00dev, 104, 0x92);
+ rt2800_bbp_write(rt2x00dev, 88, 0x90);
+ rt2800_bbp_write(rt2x00dev, 148, 0xc8);
+ rt2800_bbp_write(rt2x00dev, 47, 0x48);
+ rt2800_bbp_write(rt2x00dev, 120, 0x50);
+
+ if (txbf_enabled)
+ rt2800_bbp_write(rt2x00dev, 163, 0xbd);
+ else
+ rt2800_bbp_write(rt2x00dev, 163, 0x9d);
+
+ /* SNR mapping */
+ rt2800_bbp_write(rt2x00dev, 142, 6);
+ rt2800_bbp_write(rt2x00dev, 143, 160);
+ rt2800_bbp_write(rt2x00dev, 142, 7);
+ rt2800_bbp_write(rt2x00dev, 143, 161);
+ rt2800_bbp_write(rt2x00dev, 142, 8);
+ rt2800_bbp_write(rt2x00dev, 143, 162);
+
+ /* ADC/DAC control */
+ rt2800_bbp_write(rt2x00dev, 31, 0x08);
+
+ /* RX AGC energy lower bound in log2 */
+ rt2800_bbp_write(rt2x00dev, 68, 0x0b);
+
+ /* FIXME: BBP 105 owerwrite? */
+ rt2800_bbp_write(rt2x00dev, 105, 0x04);
+}
+
static void rt2800_init_rfcsr_3593(struct rt2x00_dev *rt2x00dev)
{
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
@@ -5459,7 +5505,7 @@ static void rt2800_init_rfcsr_3593(struct rt2x00_dev *rt2x00dev)
rt2800_led_open_drain_enable(rt2x00dev);
rt2800_normal_mode_setup_3593(rt2x00dev);
- /* TODO: post BBP initialization */
+ rt3593_post_bbp_init(rt2x00dev);
/* TODO: enable stream mode support */
}
--
1.7.10
^ permalink raw reply related
* [PATCH v3 06/20] rt2x00: rt2800lib: fix BBP1_TX_ANTENNA field configuration for 3T devices
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
The field must be set to 2 instead of 0 for
devices with three TX chains.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
drivers/net/wireless/rt2x00/rt2800lib.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index e817278..1a6a4eb 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1763,7 +1763,7 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
break;
case 3:
- rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
break;
}
--
1.7.10
^ permalink raw reply related
* [PATCH v3 20/20] rt2x00: rt2800usb: add USB device ID for Linksys AE3000
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
The Linksys AE3000 device is based on the RT3573
chipset. The support for this chipset is available
already, and the AE3000 device works with the driver.
Only managed mode works correctly at the moment,
for AP mode additional changes are needed in the
driver.
Also add a new RT2800USB_RT3573 Kconfig option and
only enable support for RT3573 based devices if
that is enabled.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
Changes since v1:
- Make the support selectable by a Kconfig option.
---
drivers/net/wireless/rt2x00/Kconfig | 6 ++++++
drivers/net/wireless/rt2x00/rt2800usb.c | 4 ++++
2 files changed, 10 insertions(+)
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 9b915d3..c60d6e8 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -166,6 +166,12 @@ config RT2800USB_RT35XX
rt2800usb driver.
Supported chips: RT3572
+config RT2800USB_RT3573
+ bool "rt2800usb - Include support for rt3573 devices (EXPERIMENTAL)"
+ ---help---
+ This enables support for RT3573 chipset based wireless USB devices
+ in the rt2800usb driver.
+
config RT2800USB_RT53XX
bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)"
---help---
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index c24c1fd..ab609ae 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -1197,6 +1197,10 @@ static struct usb_device_id rt2800usb_device_table[] = {
/* Zinwell */
{ USB_DEVICE(0x5a57, 0x0284) },
#endif
+#ifdef CONFIG_RT2800USB_RT3573
+ /* Linksys */
+ { USB_DEVICE(0x13b1, 0x003b) },
+#endif
#ifdef CONFIG_RT2800USB_RT53XX
/* Arcadyan */
{ USB_DEVICE(0x043e, 0x7a12) },
--
1.7.10
^ permalink raw reply related
* [PATCH v3 16/20] rt2x00: rt2800lib: enable VCO recalibration for RF3053
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2:
- keep case statements in alphabetical order
---
drivers/net/wireless/rt2x00/rt2800lib.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index e6d6c75..46d5f42 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4194,6 +4194,7 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
break;
+ case RF3053:
case RF3290:
case RF5360:
case RF5370:
@@ -7595,6 +7596,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
case RF3022:
case RF3320:
case RF3052:
+ case RF3053:
case RF3290:
case RF5360:
case RF5370:
--
1.7.10
^ permalink raw reply related
* [PATCH v3 10/20] rt2x00: rt2800lib: introduce rt2800_get_txmixer_gain_{24,5}g helpers
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
Move the TX mixer gain reading code into separate
helper functions in preparation for RT3593 support.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
drivers/net/wireless/rt2x00/rt2800lib.c | 38 +++++++++++++++++++------------
1 file changed, 24 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index b11f0b0..1f32732 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -6361,6 +6361,28 @@ int rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
}
EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse);
+static u8 rt2800_get_txmixer_gain_24g(struct rt2x00_dev *rt2x00dev)
+{
+ u16 word;
+
+ rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &word);
+ if ((word & 0x00ff) != 0x00ff)
+ return rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_BG_VAL);
+
+ return 0;
+}
+
+static u8 rt2800_get_txmixer_gain_5g(struct rt2x00_dev *rt2x00dev)
+{
+ u16 word;
+
+ rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A, &word);
+ if ((word & 0x00ff) != 0x00ff)
+ return rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_A_VAL);
+
+ return 0;
+}
+
static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
{
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
@@ -6455,13 +6477,7 @@ static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
- rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &word);
- if ((word & 0x00ff) != 0x00ff) {
- drv_data->txmixer_gain_24g =
- rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_BG_VAL);
- } else {
- drv_data->txmixer_gain_24g = 0;
- }
+ drv_data->txmixer_gain_24g = rt2800_get_txmixer_gain_24g(rt2x00dev);
rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
@@ -6472,13 +6488,7 @@ static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
default_lna_gain);
rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
- rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A, &word);
- if ((word & 0x00ff) != 0x00ff) {
- drv_data->txmixer_gain_5g =
- rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_A_VAL);
- } else {
- drv_data->txmixer_gain_5g = 0;
- }
+ drv_data->txmixer_gain_5g = rt2800_get_txmixer_gain_5g(rt2x00dev);
rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
--
1.7.10
^ permalink raw reply related
* [PATCH v3 19/20] rt2x00: rt2800usb: use correct [RT]XWI size for RT3593
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
The RT3593 chipset requires different [RT]XWI size
values. Modify the driver to use the correct values.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
drivers/net/wireless/rt2x00/rt2800.h | 1 +
drivers/net/wireless/rt2x00/rt2800usb.c | 5 ++++-
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 1ba797b..a313241 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -2814,6 +2814,7 @@ enum rt2800_eeprom_word {
#define TXWI_DESC_SIZE_5WORDS (5 * sizeof(__le32))
#define RXWI_DESC_SIZE_4WORDS (4 * sizeof(__le32))
+#define RXWI_DESC_SIZE_5WORDS (5 * sizeof(__le32))
#define RXWI_DESC_SIZE_6WORDS (6 * sizeof(__le32))
/*
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 840833b..c24c1fd 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -854,7 +854,10 @@ static void rt2800usb_queue_init(struct data_queue *queue)
struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
unsigned short txwi_size, rxwi_size;
- if (rt2x00_rt(rt2x00dev, RT5592)) {
+ if (rt2x00_rt(rt2x00dev, RT3593)) {
+ txwi_size = TXWI_DESC_SIZE_4WORDS;
+ rxwi_size = RXWI_DESC_SIZE_5WORDS;
+ } else if (rt2x00_rt(rt2x00dev, RT5592)) {
txwi_size = TXWI_DESC_SIZE_5WORDS;
rxwi_size = RXWI_DESC_SIZE_6WORDS;
} else {
--
1.7.10
^ permalink raw reply related
* [PATCH v3 18/20] rt2x00: rt2800lib: enable RT3593 support
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
Support for the RT3593 has been implemented in
the previous changes, so it is safe to mark it
supported in the driver.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
drivers/net/wireless/rt2x00/rt2800lib.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 9ab587e..dedc3d4 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -7636,6 +7636,7 @@ static int rt2800_probe_rt(struct rt2x00_dev *rt2x00dev)
case RT3352:
case RT3390:
case RT3572:
+ case RT3593:
case RT5390:
case RT5392:
case RT5592:
--
1.7.10
^ permalink raw reply related
* [PATCH v3 05/20] rt2x00: rt2800lib: add TX power configuration for RT3593
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.
References:
RTMPReadTxPwrPerRateExt in chips/rt3593.c
RT3593_AsicGetTxPowerOffset in chips/rt3593.c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
drivers/net/wireless/rt2x00/rt2800.h | 116 +++++++++
drivers/net/wireless/rt2x00/rt2800lib.c | 425 ++++++++++++++++++++++++++++++-
2 files changed, 538 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 47aceae..7b7caeb 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -1083,6 +1083,15 @@
#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000)
#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000)
#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000)
+/* bits for 3T devices */
+#define TX_PWR_CFG_0_CCK1_CH0 FIELD32(0x0000000f)
+#define TX_PWR_CFG_0_CCK1_CH1 FIELD32(0x000000f0)
+#define TX_PWR_CFG_0_CCK5_CH0 FIELD32(0x00000f00)
+#define TX_PWR_CFG_0_CCK5_CH1 FIELD32(0x0000f000)
+#define TX_PWR_CFG_0_OFDM6_CH0 FIELD32(0x000f0000)
+#define TX_PWR_CFG_0_OFDM6_CH1 FIELD32(0x00f00000)
+#define TX_PWR_CFG_0_OFDM12_CH0 FIELD32(0x0f000000)
+#define TX_PWR_CFG_0_OFDM12_CH1 FIELD32(0xf0000000)
/*
* TX_PWR_CFG_1:
@@ -1096,6 +1105,15 @@
#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000)
#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000)
#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000)
+/* bits for 3T devices */
+#define TX_PWR_CFG_1_OFDM24_CH0 FIELD32(0x0000000f)
+#define TX_PWR_CFG_1_OFDM24_CH1 FIELD32(0x000000f0)
+#define TX_PWR_CFG_1_OFDM48_CH0 FIELD32(0x00000f00)
+#define TX_PWR_CFG_1_OFDM48_CH1 FIELD32(0x0000f000)
+#define TX_PWR_CFG_1_MCS0_CH0 FIELD32(0x000f0000)
+#define TX_PWR_CFG_1_MCS0_CH1 FIELD32(0x00f00000)
+#define TX_PWR_CFG_1_MCS2_CH0 FIELD32(0x0f000000)
+#define TX_PWR_CFG_1_MCS2_CH1 FIELD32(0xf0000000)
/*
* TX_PWR_CFG_2:
@@ -1109,6 +1127,15 @@
#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000)
#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000)
#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000)
+/* bits for 3T devices */
+#define TX_PWR_CFG_2_MCS4_CH0 FIELD32(0x0000000f)
+#define TX_PWR_CFG_2_MCS4_CH1 FIELD32(0x000000f0)
+#define TX_PWR_CFG_2_MCS6_CH0 FIELD32(0x00000f00)
+#define TX_PWR_CFG_2_MCS6_CH1 FIELD32(0x0000f000)
+#define TX_PWR_CFG_2_MCS8_CH0 FIELD32(0x000f0000)
+#define TX_PWR_CFG_2_MCS8_CH1 FIELD32(0x00f00000)
+#define TX_PWR_CFG_2_MCS10_CH0 FIELD32(0x0f000000)
+#define TX_PWR_CFG_2_MCS10_CH1 FIELD32(0xf0000000)
/*
* TX_PWR_CFG_3:
@@ -1122,6 +1149,15 @@
#define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000)
#define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000)
#define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000)
+/* bits for 3T devices */
+#define TX_PWR_CFG_3_MCS12_CH0 FIELD32(0x0000000f)
+#define TX_PWR_CFG_3_MCS12_CH1 FIELD32(0x000000f0)
+#define TX_PWR_CFG_3_MCS14_CH0 FIELD32(0x00000f00)
+#define TX_PWR_CFG_3_MCS14_CH1 FIELD32(0x0000f000)
+#define TX_PWR_CFG_3_STBC0_CH0 FIELD32(0x000f0000)
+#define TX_PWR_CFG_3_STBC0_CH1 FIELD32(0x00f00000)
+#define TX_PWR_CFG_3_STBC2_CH0 FIELD32(0x0f000000)
+#define TX_PWR_CFG_3_STBC2_CH1 FIELD32(0xf0000000)
/*
* TX_PWR_CFG_4:
@@ -1131,6 +1167,11 @@
#define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0)
#define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00)
#define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000)
+/* bits for 3T devices */
+#define TX_PWR_CFG_3_STBC4_CH0 FIELD32(0x0000000f)
+#define TX_PWR_CFG_3_STBC4_CH1 FIELD32(0x000000f0)
+#define TX_PWR_CFG_3_STBC6_CH0 FIELD32(0x00000f00)
+#define TX_PWR_CFG_3_STBC6_CH1 FIELD32(0x0000f000)
/*
* TX_PIN_CFG:
@@ -1452,6 +1493,81 @@
*/
#define EXP_ACK_TIME 0x1380
+/* TX_PWR_CFG_5 */
+#define TX_PWR_CFG_5 0x1384
+#define TX_PWR_CFG_5_MCS16_CH0 FIELD32(0x0000000f)
+#define TX_PWR_CFG_5_MCS16_CH1 FIELD32(0x000000f0)
+#define TX_PWR_CFG_5_MCS16_CH2 FIELD32(0x00000f00)
+#define TX_PWR_CFG_5_MCS18_CH0 FIELD32(0x000f0000)
+#define TX_PWR_CFG_5_MCS18_CH1 FIELD32(0x00f00000)
+#define TX_PWR_CFG_5_MCS18_CH2 FIELD32(0x0f000000)
+
+/* TX_PWR_CFG_6 */
+#define TX_PWR_CFG_6 0x1388
+#define TX_PWR_CFG_6_MCS20_CH0 FIELD32(0x0000000f)
+#define TX_PWR_CFG_6_MCS20_CH1 FIELD32(0x000000f0)
+#define TX_PWR_CFG_6_MCS20_CH2 FIELD32(0x00000f00)
+#define TX_PWR_CFG_6_MCS22_CH0 FIELD32(0x000f0000)
+#define TX_PWR_CFG_6_MCS22_CH1 FIELD32(0x00f00000)
+#define TX_PWR_CFG_6_MCS22_CH2 FIELD32(0x0f000000)
+
+/* TX_PWR_CFG_0_EXT */
+#define TX_PWR_CFG_0_EXT 0x1390
+#define TX_PWR_CFG_0_EXT_CCK1_CH2 FIELD32(0x0000000f)
+#define TX_PWR_CFG_0_EXT_CCK5_CH2 FIELD32(0x00000f00)
+#define TX_PWR_CFG_0_EXT_OFDM6_CH2 FIELD32(0x000f0000)
+#define TX_PWR_CFG_0_EXT_OFDM12_CH2 FIELD32(0x0f000000)
+
+/* TX_PWR_CFG_1_EXT */
+#define TX_PWR_CFG_1_EXT 0x1394
+#define TX_PWR_CFG_1_EXT_OFDM24_CH2 FIELD32(0x0000000f)
+#define TX_PWR_CFG_1_EXT_OFDM48_CH2 FIELD32(0x00000f00)
+#define TX_PWR_CFG_1_EXT_MCS0_CH2 FIELD32(0x000f0000)
+#define TX_PWR_CFG_1_EXT_MCS2_CH2 FIELD32(0x0f000000)
+
+/* TX_PWR_CFG_2_EXT */
+#define TX_PWR_CFG_2_EXT 0x1398
+#define TX_PWR_CFG_2_EXT_MCS4_CH2 FIELD32(0x0000000f)
+#define TX_PWR_CFG_2_EXT_MCS6_CH2 FIELD32(0x00000f00)
+#define TX_PWR_CFG_2_EXT_MCS8_CH2 FIELD32(0x000f0000)
+#define TX_PWR_CFG_2_EXT_MCS10_CH2 FIELD32(0x0f000000)
+
+/* TX_PWR_CFG_3_EXT */
+#define TX_PWR_CFG_3_EXT 0x139c
+#define TX_PWR_CFG_3_EXT_MCS12_CH2 FIELD32(0x0000000f)
+#define TX_PWR_CFG_3_EXT_MCS14_CH2 FIELD32(0x00000f00)
+#define TX_PWR_CFG_3_EXT_STBC0_CH2 FIELD32(0x000f0000)
+#define TX_PWR_CFG_3_EXT_STBC2_CH2 FIELD32(0x0f000000)
+
+/* TX_PWR_CFG_4_EXT */
+#define TX_PWR_CFG_4_EXT 0x13a0
+#define TX_PWR_CFG_4_EXT_STBC4_CH2 FIELD32(0x0000000f)
+#define TX_PWR_CFG_4_EXT_STBC6_CH2 FIELD32(0x00000f00)
+
+/* TX_PWR_CFG_7 */
+#define TX_PWR_CFG_7 0x13d4
+#define TX_PWR_CFG_7_OFDM54_CH0 FIELD32(0x0000000f)
+#define TX_PWR_CFG_7_OFDM54_CH1 FIELD32(0x000000f0)
+#define TX_PWR_CFG_7_OFDM54_CH2 FIELD32(0x00000f00)
+#define TX_PWR_CFG_7_MCS7_CH0 FIELD32(0x000f0000)
+#define TX_PWR_CFG_7_MCS7_CH1 FIELD32(0x00f00000)
+#define TX_PWR_CFG_7_MCS7_CH2 FIELD32(0x0f000000)
+
+/* TX_PWR_CFG_8 */
+#define TX_PWR_CFG_8 0x13d8
+#define TX_PWR_CFG_8_MCS15_CH0 FIELD32(0x0000000f)
+#define TX_PWR_CFG_8_MCS15_CH1 FIELD32(0x000000f0)
+#define TX_PWR_CFG_8_MCS15_CH2 FIELD32(0x00000f00)
+#define TX_PWR_CFG_8_MCS23_CH0 FIELD32(0x000f0000)
+#define TX_PWR_CFG_8_MCS23_CH1 FIELD32(0x00f00000)
+#define TX_PWR_CFG_8_MCS23_CH2 FIELD32(0x0f000000)
+
+/* TX_PWR_CFG_9 */
+#define TX_PWR_CFG_9 0x13dc
+#define TX_PWR_CFG_9_STBC7_CH0 FIELD32(0x0000000f)
+#define TX_PWR_CFG_9_STBC7_CH1 FIELD32(0x000000f0)
+#define TX_PWR_CFG_9_STBC7_CH2 FIELD32(0x00000f00)
+
/*
* RX_FILTER_CFG: RX configuration register.
*/
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 7b5c593..e817278 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -3120,6 +3120,9 @@ static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b,
u8 eirp_txpower_criterion;
u8 reg_limit;
+ if (rt2x00_rt(rt2x00dev, RT3593))
+ return min_t(u8, txpower, 0xc);
+
if (test_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags)) {
/*
* Check if eirp txpower exceed txpower_limit.
@@ -3155,6 +3158,412 @@ static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b,
return min_t(u8, txpower, 0xc);
}
+
+enum {
+ TX_PWR_CFG_0_IDX,
+ TX_PWR_CFG_1_IDX,
+ TX_PWR_CFG_2_IDX,
+ TX_PWR_CFG_3_IDX,
+ TX_PWR_CFG_4_IDX,
+ TX_PWR_CFG_5_IDX,
+ TX_PWR_CFG_6_IDX,
+ TX_PWR_CFG_7_IDX,
+ TX_PWR_CFG_8_IDX,
+ TX_PWR_CFG_9_IDX,
+ TX_PWR_CFG_0_EXT_IDX,
+ TX_PWR_CFG_1_EXT_IDX,
+ TX_PWR_CFG_2_EXT_IDX,
+ TX_PWR_CFG_3_EXT_IDX,
+ TX_PWR_CFG_4_EXT_IDX,
+ TX_PWR_CFG_IDX_COUNT,
+};
+
+static void rt2800_config_txpower_rt3593(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_channel *chan,
+ int power_level)
+{
+ u8 txpower;
+ u16 eeprom;
+ u32 regs[TX_PWR_CFG_IDX_COUNT];
+ unsigned int offset;
+ enum ieee80211_band band = chan->band;
+ int delta;
+ int i;
+
+ memset(regs, '\0', sizeof(regs));
+
+ /* TODO: adapt TX power reduction from the rt28xx code */
+
+ /* calculate temperature compensation delta */
+ delta = rt2800_get_gain_calibration_delta(rt2x00dev);
+
+ if (band == IEEE80211_BAND_5GHZ)
+ offset = 16;
+ else
+ offset = 0;
+
+ if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
+ offset += 8;
+
+ /* read the next four txpower values */
+ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
+ offset, &eeprom);
+
+ /* CCK 1MBS,2MBS */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 1, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
+ TX_PWR_CFG_0_CCK1_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
+ TX_PWR_CFG_0_CCK1_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX],
+ TX_PWR_CFG_0_EXT_CCK1_CH2, txpower);
+
+ /* CCK 5.5MBS,11MBS */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 1, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
+ TX_PWR_CFG_0_CCK5_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
+ TX_PWR_CFG_0_CCK5_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX],
+ TX_PWR_CFG_0_EXT_CCK5_CH2, txpower);
+
+ /* OFDM 6MBS,9MBS */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
+ TX_PWR_CFG_0_OFDM6_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
+ TX_PWR_CFG_0_OFDM6_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX],
+ TX_PWR_CFG_0_EXT_OFDM6_CH2, txpower);
+
+ /* OFDM 12MBS,18MBS */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
+ TX_PWR_CFG_0_OFDM12_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
+ TX_PWR_CFG_0_OFDM12_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX],
+ TX_PWR_CFG_0_EXT_OFDM12_CH2, txpower);
+
+ /* read the next four txpower values */
+ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
+ offset + 1, &eeprom);
+
+ /* OFDM 24MBS,36MBS */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
+ TX_PWR_CFG_1_OFDM24_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
+ TX_PWR_CFG_1_OFDM24_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX],
+ TX_PWR_CFG_1_EXT_OFDM24_CH2, txpower);
+
+ /* OFDM 48MBS */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
+ TX_PWR_CFG_1_OFDM48_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
+ TX_PWR_CFG_1_OFDM48_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX],
+ TX_PWR_CFG_1_EXT_OFDM48_CH2, txpower);
+
+ /* OFDM 54MBS */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX],
+ TX_PWR_CFG_7_OFDM54_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX],
+ TX_PWR_CFG_7_OFDM54_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX],
+ TX_PWR_CFG_7_OFDM54_CH2, txpower);
+
+ /* read the next four txpower values */
+ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
+ offset + 2, &eeprom);
+
+ /* MCS 0,1 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
+ TX_PWR_CFG_1_MCS0_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
+ TX_PWR_CFG_1_MCS0_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX],
+ TX_PWR_CFG_1_EXT_MCS0_CH2, txpower);
+
+ /* MCS 2,3 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
+ TX_PWR_CFG_1_MCS2_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
+ TX_PWR_CFG_1_MCS2_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX],
+ TX_PWR_CFG_1_EXT_MCS2_CH2, txpower);
+
+ /* MCS 4,5 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
+ TX_PWR_CFG_2_MCS4_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
+ TX_PWR_CFG_2_MCS4_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX],
+ TX_PWR_CFG_2_EXT_MCS4_CH2, txpower);
+
+ /* MCS 6 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
+ TX_PWR_CFG_2_MCS6_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
+ TX_PWR_CFG_2_MCS6_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX],
+ TX_PWR_CFG_2_EXT_MCS6_CH2, txpower);
+
+ /* read the next four txpower values */
+ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
+ offset + 3, &eeprom);
+
+ /* MCS 7 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX],
+ TX_PWR_CFG_7_MCS7_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX],
+ TX_PWR_CFG_7_MCS7_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX],
+ TX_PWR_CFG_7_MCS7_CH2, txpower);
+
+ /* MCS 8,9 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
+ TX_PWR_CFG_2_MCS8_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
+ TX_PWR_CFG_2_MCS8_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX],
+ TX_PWR_CFG_2_EXT_MCS8_CH2, txpower);
+
+ /* MCS 10,11 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
+ TX_PWR_CFG_2_MCS10_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
+ TX_PWR_CFG_2_MCS10_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX],
+ TX_PWR_CFG_2_EXT_MCS10_CH2, txpower);
+
+ /* MCS 12,13 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
+ TX_PWR_CFG_3_MCS12_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
+ TX_PWR_CFG_3_MCS12_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX],
+ TX_PWR_CFG_3_EXT_MCS12_CH2, txpower);
+
+ /* read the next four txpower values */
+ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
+ offset + 4, &eeprom);
+
+ /* MCS 14 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
+ TX_PWR_CFG_3_MCS14_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
+ TX_PWR_CFG_3_MCS14_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX],
+ TX_PWR_CFG_3_EXT_MCS14_CH2, txpower);
+
+ /* MCS 15 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX],
+ TX_PWR_CFG_8_MCS15_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX],
+ TX_PWR_CFG_8_MCS15_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX],
+ TX_PWR_CFG_8_MCS15_CH2, txpower);
+
+ /* MCS 16,17 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX],
+ TX_PWR_CFG_5_MCS16_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX],
+ TX_PWR_CFG_5_MCS16_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX],
+ TX_PWR_CFG_5_MCS16_CH2, txpower);
+
+ /* MCS 18,19 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX],
+ TX_PWR_CFG_5_MCS18_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX],
+ TX_PWR_CFG_5_MCS18_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX],
+ TX_PWR_CFG_5_MCS18_CH2, txpower);
+
+ /* read the next four txpower values */
+ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
+ offset + 5, &eeprom);
+
+ /* MCS 20,21 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX],
+ TX_PWR_CFG_6_MCS20_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX],
+ TX_PWR_CFG_6_MCS20_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX],
+ TX_PWR_CFG_6_MCS20_CH2, txpower);
+
+ /* MCS 22 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX],
+ TX_PWR_CFG_6_MCS22_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX],
+ TX_PWR_CFG_6_MCS22_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX],
+ TX_PWR_CFG_6_MCS22_CH2, txpower);
+
+ /* MCS 23 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX],
+ TX_PWR_CFG_8_MCS23_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX],
+ TX_PWR_CFG_8_MCS23_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX],
+ TX_PWR_CFG_8_MCS23_CH2, txpower);
+
+ /* read the next four txpower values */
+ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
+ offset + 6, &eeprom);
+
+ /* STBC, MCS 0,1 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
+ TX_PWR_CFG_3_STBC0_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
+ TX_PWR_CFG_3_STBC0_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX],
+ TX_PWR_CFG_3_EXT_STBC0_CH2, txpower);
+
+ /* STBC, MCS 2,3 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
+ TX_PWR_CFG_3_STBC2_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
+ TX_PWR_CFG_3_STBC2_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX],
+ TX_PWR_CFG_3_EXT_STBC2_CH2, txpower);
+
+ /* STBC, MCS 4,5 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_4_EXT_IDX], TX_PWR_CFG_RATE0,
+ txpower);
+
+ /* STBC, MCS 6 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE2, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE3, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_4_EXT_IDX], TX_PWR_CFG_RATE2,
+ txpower);
+
+ /* read the next four txpower values */
+ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
+ offset + 7, &eeprom);
+
+ /* STBC, MCS 7 */
+ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
+ txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
+ txpower, delta);
+ rt2x00_set_field32(®s[TX_PWR_CFG_9_IDX],
+ TX_PWR_CFG_9_STBC7_CH0, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_9_IDX],
+ TX_PWR_CFG_9_STBC7_CH1, txpower);
+ rt2x00_set_field32(®s[TX_PWR_CFG_9_IDX],
+ TX_PWR_CFG_9_STBC7_CH2, txpower);
+
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, regs[TX_PWR_CFG_0_IDX]);
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, regs[TX_PWR_CFG_1_IDX]);
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, regs[TX_PWR_CFG_2_IDX]);
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, regs[TX_PWR_CFG_3_IDX]);
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, regs[TX_PWR_CFG_4_IDX]);
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_5, regs[TX_PWR_CFG_5_IDX]);
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_6, regs[TX_PWR_CFG_6_IDX]);
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_7, regs[TX_PWR_CFG_7_IDX]);
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_8, regs[TX_PWR_CFG_8_IDX]);
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_9, regs[TX_PWR_CFG_9_IDX]);
+
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_0_EXT,
+ regs[TX_PWR_CFG_0_EXT_IDX]);
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_1_EXT,
+ regs[TX_PWR_CFG_1_EXT_IDX]);
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_2_EXT,
+ regs[TX_PWR_CFG_2_EXT_IDX]);
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_3_EXT,
+ regs[TX_PWR_CFG_3_EXT_IDX]);
+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_4_EXT,
+ regs[TX_PWR_CFG_4_EXT_IDX]);
+
+ for (i = 0; i < TX_PWR_CFG_IDX_COUNT; i++)
+ rt2x00_dbg(rt2x00dev,
+ "band:%cGHz, BW:%c0MHz, TX_PWR_CFG_%d%s = %08lx\n",
+ (band == IEEE80211_BAND_5GHZ) ? '5' : '2',
+ (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) ?
+ '4' : '2',
+ (i > TX_PWR_CFG_9_IDX) ?
+ (i - TX_PWR_CFG_9_IDX - 1) : i,
+ (i > TX_PWR_CFG_9_IDX) ? "_EXT" : "",
+ (unsigned long) regs[i]);
+}
+
/*
* We configure transmit power using MAC TX_PWR_CFG_{0,...,N} registers and
* BBP R1 register. TX_PWR_CFG_X allow to configure per rate TX power values,
@@ -3164,9 +3573,9 @@ static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b,
* EEPROM_TXPOWER_BYRATE offset. We adjust them and BBP R1 settings according to
* current conditions (i.e. band, bandwidth, temperature, user settings).
*/
-static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
- struct ieee80211_channel *chan,
- int power_level)
+static void rt2800_config_txpower_rt28xx(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_channel *chan,
+ int power_level)
{
u8 txpower, r1;
u16 eeprom;
@@ -3338,6 +3747,16 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
}
}
+static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_channel *chan,
+ int power_level)
+{
+ if (rt2x00_rt(rt2x00dev, RT3593))
+ rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level);
+ else
+ rt2800_config_txpower_rt28xx(rt2x00dev, chan, power_level);
+}
+
void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev)
{
rt2800_config_txpower(rt2x00dev, rt2x00dev->hw->conf.chandef.chan,
--
1.7.10
^ permalink raw reply related
* [PATCH v3 13/20] rt2x00: rt2800lib: add default_power3 field for three-chain devices
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
The actual code uses two default TX power values.
This is enough for 1T and for 2T devices however
on 3T devices another value is needed for the third
chain.
Add a new field to struct channel_info and initialize
it from the 'rt2800_probe_hw_mode' function. Also modify
the 'rt2800_config_channel' to handle the new field as
well.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
drivers/net/wireless/rt2x00/rt2800lib.c | 22 ++++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00.h | 1 +
2 files changed, 23 insertions(+)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 419ea05..e3e652d 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2768,6 +2768,10 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
info->default_power1);
info->default_power2 = rt2800_txpower_to_dev(rt2x00dev, rf->channel,
info->default_power2);
+ if (rt2x00dev->default_ant.tx_chain_num > 2)
+ info->default_power3 =
+ rt2800_txpower_to_dev(rt2x00dev, rf->channel,
+ info->default_power3);
switch (rt2x00dev->chip.rf) {
case RF2020:
@@ -6963,6 +6967,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
struct channel_info *info;
char *default_power1;
char *default_power2;
+ char *default_power3;
unsigned int i;
u16 eeprom;
u32 reg;
@@ -7115,9 +7120,17 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
default_power1 = rt2800_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
default_power2 = rt2800_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
+ if (rt2x00dev->default_ant.tx_chain_num > 2)
+ default_power3 = rt2800_eeprom_addr(rt2x00dev,
+ EEPROM_EXT_TXPOWER_BG3);
+ else
+ default_power3 = NULL;
+
for (i = 0; i < 14; i++) {
info[i].default_power1 = default_power1[i];
info[i].default_power2 = default_power2[i];
+ if (default_power3)
+ info[i].default_power3 = default_power3[i];
}
if (spec->num_channels > 14) {
@@ -7126,9 +7139,18 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
default_power2 = rt2800_eeprom_addr(rt2x00dev,
EEPROM_TXPOWER_A2);
+ if (rt2x00dev->default_ant.tx_chain_num > 2)
+ default_power3 =
+ rt2800_eeprom_addr(rt2x00dev,
+ EEPROM_EXT_TXPOWER_A3);
+ else
+ default_power3 = NULL;
+
for (i = 14; i < spec->num_channels; i++) {
info[i].default_power1 = default_power1[i - 14];
info[i].default_power2 = default_power2[i - 14];
+ if (default_power3)
+ info[i].default_power3 = default_power3[i - 14];
}
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index ee3fc57..fe4c572 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -211,6 +211,7 @@ struct channel_info {
short max_power;
short default_power1;
short default_power2;
+ short default_power3;
};
/*
--
1.7.10
^ permalink raw reply related
* [PATCH v3 03/20] rt2x00: rt2800lib: add RFCSR register initialization for RT3593
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.
References:
NICInitRT3593RFRegisters in chips/rt3593.c
RT3593LoadRFNormalModeSetup in chips/rt3593.c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
Changes since v2:
- keep case statements in alphabetical order
---
drivers/net/wireless/rt2x00/rt2800.h | 10 +++
drivers/net/wireless/rt2x00/rt2800lib.c | 122 +++++++++++++++++++++++++++++++
2 files changed, 132 insertions(+)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 02bc80d..47aceae 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -2093,6 +2093,10 @@ struct mac_iveiv_entry {
#define RFCSR17_R FIELD8(0x20)
#define RFCSR17_CODE FIELD8(0x7f)
+/* RFCSR 18 */
+#define RFCSR18_XO_TUNE_BYPASS FIELD8(0x40)
+
+
/*
* RFCSR 20:
*/
@@ -2174,6 +2178,12 @@ struct mac_iveiv_entry {
*/
#define RFCSR50_TX FIELD8(0x3f)
#define RFCSR50_EP FIELD8(0xc0)
+/* bits for RT3593*/
+#define RFCSR50_TX_LO2_EN FIELD8(0x10)
+
+/* RFCSR 51 */
+/* bits for RT3593*/
+#define RFCSR51_BITS24 FIELD8(0x1c)
/*
* RF registers
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 53ebdb9..b650569 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4963,6 +4963,42 @@ static void rt2800_normal_mode_setup_3xxx(struct rt2x00_dev *rt2x00dev)
}
}
+static void rt2800_normal_mode_setup_3593(struct rt2x00_dev *rt2x00dev)
+{
+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+ u8 rfcsr;
+ u8 tx_gain;
+
+ rt2800_rfcsr_read(rt2x00dev, 50, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR50_TX_LO2_EN, 0);
+ rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 51, &rfcsr);
+ tx_gain = rt2x00_get_field8(drv_data->txmixer_gain_24g,
+ RFCSR17_TXMIXER_GAIN);
+ rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, tx_gain);
+ rt2800_rfcsr_write(rt2x00dev, 51, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 38, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR38_RX_LO1_EN, 0);
+ rt2800_rfcsr_write(rt2x00dev, 38, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 39, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR39_RX_LO2_EN, 0);
+ rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RX_VCM, 2);
+ rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+
+ /* TODO: enable stream mode */
+}
+
static void rt2800_normal_mode_setup_5xxx(struct rt2x00_dev *rt2x00dev)
{
u8 reg;
@@ -5345,6 +5381,89 @@ static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev)
rt2800_normal_mode_setup_3xxx(rt2x00dev);
}
+static void rt2800_init_rfcsr_3593(struct rt2x00_dev *rt2x00dev)
+{
+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+ u32 reg;
+ u8 rfcsr;
+
+ /* Disable GPIO #4 and #7 function for LAN PE control */
+ rt2800_register_read(rt2x00dev, GPIO_SWITCH, ®);
+ rt2x00_set_field32(®, GPIO_SWITCH_4, 0);
+ rt2x00_set_field32(®, GPIO_SWITCH_7, 0);
+ rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
+
+ /* Initialize default register values */
+ rt2800_rfcsr_write(rt2x00dev, 1, 0x03);
+ rt2800_rfcsr_write(rt2x00dev, 3, 0x80);
+ rt2800_rfcsr_write(rt2x00dev, 5, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
+ rt2800_rfcsr_write(rt2x00dev, 8, 0xf1);
+ rt2800_rfcsr_write(rt2x00dev, 9, 0x02);
+ rt2800_rfcsr_write(rt2x00dev, 10, 0xd3);
+ rt2800_rfcsr_write(rt2x00dev, 11, 0x40);
+ rt2800_rfcsr_write(rt2x00dev, 12, 0x4e);
+ rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
+ rt2800_rfcsr_write(rt2x00dev, 18, 0x40);
+ rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
+ rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
+ rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
+ rt2800_rfcsr_write(rt2x00dev, 32, 0x78);
+ rt2800_rfcsr_write(rt2x00dev, 33, 0x3b);
+ rt2800_rfcsr_write(rt2x00dev, 34, 0x3c);
+ rt2800_rfcsr_write(rt2x00dev, 35, 0xe0);
+ rt2800_rfcsr_write(rt2x00dev, 38, 0x86);
+ rt2800_rfcsr_write(rt2x00dev, 39, 0x23);
+ rt2800_rfcsr_write(rt2x00dev, 44, 0xd3);
+ rt2800_rfcsr_write(rt2x00dev, 45, 0xbb);
+ rt2800_rfcsr_write(rt2x00dev, 46, 0x60);
+ rt2800_rfcsr_write(rt2x00dev, 49, 0x8e);
+ rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
+ rt2800_rfcsr_write(rt2x00dev, 51, 0x75);
+ rt2800_rfcsr_write(rt2x00dev, 52, 0x45);
+ rt2800_rfcsr_write(rt2x00dev, 53, 0x18);
+ rt2800_rfcsr_write(rt2x00dev, 54, 0x18);
+ rt2800_rfcsr_write(rt2x00dev, 55, 0x18);
+ rt2800_rfcsr_write(rt2x00dev, 56, 0xdb);
+ rt2800_rfcsr_write(rt2x00dev, 57, 0x6e);
+
+ /* Initiate calibration */
+ /* TODO: use rt2800_rf_init_calibration ? */
+ rt2800_rfcsr_read(rt2x00dev, 2, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
+ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
+
+ rt2800_adjust_freq_offset(rt2x00dev);
+
+ rt2800_rfcsr_read(rt2x00dev, 18, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR18_XO_TUNE_BYPASS, 1);
+ rt2800_rfcsr_write(rt2x00dev, 18, rfcsr);
+
+ rt2800_register_read(rt2x00dev, LDO_CFG0, ®);
+ rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3);
+ rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1);
+ rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
+ usleep_range(1000, 1500);
+ rt2800_register_read(rt2x00dev, LDO_CFG0, ®);
+ rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0);
+ rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
+
+ /* Set initial values for RX filter calibration */
+ drv_data->calibration_bw20 = 0x1f;
+ drv_data->calibration_bw40 = 0x2f;
+
+ /* Save BBP 25 & 26 values for later use in channel switching */
+ rt2800_bbp_read(rt2x00dev, 25, &drv_data->bbp25);
+ rt2800_bbp_read(rt2x00dev, 26, &drv_data->bbp26);
+
+ rt2800_led_open_drain_enable(rt2x00dev);
+ rt2800_normal_mode_setup_3593(rt2x00dev);
+
+ /* TODO: post BBP initialization */
+
+ /* TODO: enable stream mode support */
+}
+
static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
{
rt2800_rf_init_calibration(rt2x00dev, 2);
@@ -5573,6 +5692,9 @@ static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
case RT3572:
rt2800_init_rfcsr_3572(rt2x00dev);
break;
+ case RT3593:
+ rt2800_init_rfcsr_3593(rt2x00dev);
+ break;
case RT5390:
rt2800_init_rfcsr_5390(rt2x00dev);
break;
--
1.7.10
^ permalink raw reply related
* [PATCH v3 07/20] rt2x00: rt2800lib: fix antenna configuration for RT3593
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
On the RT3593 chipset, BBP register 86 must be
configured by different values based on the RX
antenna numbers.
Configure this register from the 'rt2800_config_ant'
function.
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.
Reference:
RT3593_CONFIG_SET_BY_ANTENNA in include/chip/rt3593.h
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
drivers/net/wireless/rt2x00/rt2800lib.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 1a6a4eb..958215c 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1803,6 +1803,13 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
rt2800_bbp_write(rt2x00dev, 3, r3);
rt2800_bbp_write(rt2x00dev, 1, r1);
+
+ if (rt2x00_rt(rt2x00dev, RT3593)) {
+ if (ant->rx_chain_num == 1)
+ rt2800_bbp_write(rt2x00dev, 86, 0x00);
+ else
+ rt2800_bbp_write(rt2x00dev, 86, 0x46);
+ }
}
EXPORT_SYMBOL_GPL(rt2800_config_ant);
--
1.7.10
^ permalink raw reply related
* [PATCH v3 01/20] rt2x00: rt2800lib: add MAC register initialization for RT3593
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.
Reference:
NICInitRT3593MacRegisters in chips/rt3593.c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
drivers/net/wireless/rt2x00/rt2800.h | 1 +
drivers/net/wireless/rt2x00/rt2800lib.c | 17 +++++++++++++++++
2 files changed, 18 insertions(+)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 9216834..02bc80d 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -88,6 +88,7 @@
#define REV_RT3071E 0x0211
#define REV_RT3090E 0x0211
#define REV_RT3390E 0x0211
+#define REV_RT3593E 0x0211
#define REV_RT5390F 0x0502
#define REV_RT5390R 0x1502
#define REV_RT5592C 0x0221
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index d325ca2..bfeca29 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -3714,6 +3714,23 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
} else if (rt2x00_rt(rt2x00dev, RT3572)) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
+ } else if (rt2x00_rt(rt2x00dev, RT3593)) {
+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402);
+ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
+ if (rt2x00_rt_rev_lt(rt2x00dev, RT3593, REV_RT3593E)) {
+ rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1,
+ &eeprom);
+ if (rt2x00_get_field16(eeprom,
+ EEPROM_NIC_CONF1_DAC_TEST))
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2,
+ 0x0000001f);
+ else
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2,
+ 0x0000000f);
+ } else {
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2,
+ 0x00000000);
+ }
} else if (rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392) ||
rt2x00_rt(rt2x00dev, RT5592)) {
--
1.7.10
^ permalink raw reply related
* [PATCH v3 02/20] rt2x00: rt2800lib: add BBP register initialization for RT3593
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.
References:
NICInitRT3593BbpRegisters in chips/rt3593.c
NICInitBBP in common/rtmp_init.c
NICInitAsicFromEEPROM in common/rtmp_init.c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
drivers/net/wireless/rt2x00/rt2800lib.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index bfeca29..53ebdb9 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4504,6 +4504,22 @@ static void rt2800_init_bbp_3572(struct rt2x00_dev *rt2x00dev)
rt2800_disable_unused_dac_adc(rt2x00dev);
}
+static void rt2800_init_bbp_3593(struct rt2x00_dev *rt2x00dev)
+{
+ rt2800_init_bbp_early(rt2x00dev);
+
+ rt2800_bbp_write(rt2x00dev, 79, 0x13);
+ rt2800_bbp_write(rt2x00dev, 80, 0x05);
+ rt2800_bbp_write(rt2x00dev, 81, 0x33);
+ rt2800_bbp_write(rt2x00dev, 137, 0x0f);
+
+ rt2800_bbp_write(rt2x00dev, 84, 0x19);
+
+ /* Enable DC filter */
+ if (rt2x00_rt_rev_gte(rt2x00dev, RT3593, REV_RT3593E))
+ rt2800_bbp_write(rt2x00dev, 103, 0xc0);
+}
+
static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
{
int ant, div_mode;
@@ -4719,6 +4735,9 @@ static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
case RT3572:
rt2800_init_bbp_3572(rt2x00dev);
break;
+ case RT3593:
+ rt2800_init_bbp_3593(rt2x00dev);
+ return;
case RT5390:
case RT5392:
rt2800_init_bbp_53xx(rt2x00dev);
--
1.7.10
^ permalink raw reply related
* [PATCH v3 00/20] rt2x00: add experimental support for RT3593
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, users, Gabor Juhos
This patch-set implements experiemental support for the
RT3593 chipset. The patches are tested on the Linksys
AE3000 USB device only, however other USB devices which
are using the RT3573 chips might work as well.
The patch-set depends on the following series:
'rt2x00: rt2800lib: add support for extended EEPROM of three-chain devices'
Changes since v2:
- keep case values in aplhabetical order
Changes since v1:
- add missing patch
- make Linksys AE3000 support optional
Gabor Juhos (20):
rt2x00: rt2800lib: add MAC register initialization for RT3593
rt2x00: rt2800lib: add BBP register initialization for RT3593
rt2x00: rt2800lib: add RFCSR register initialization for RT3593
rt2x00: rt2800lib: add BBP post initialization for RT3593
rt2x00: rt2800lib: add TX power configuration for RT3593
rt2x00: rt2800lib: fix BBP1_TX_ANTENNA field configuration for 3T devices
rt2x00: rt2800lib: fix antenna configuration for RT3593
rt2x00: rt2800lib: add rt2800_txpower_to_dev helper
rt2x00: rt2800lib: fix default TX power values for RT3593
rt2x00: rt2800lib: introduce rt2800_get_txmixer_gain_{24,5}g helpers
rt2x00: rt2800lib: hardcode TX mixer gain values for RT3593
rt2x00: rt2800lib: fix LNA_A[12] gain values for RT3593
rt2x00: rt2800lib: add default_power3 field for three-chain devices
rt2x00: rt2800lib: add rf_vals for RF3053
rt2x00: rt2800lib: add channel configuration for RF3053
rt2x00: rt2800lib: enable VCO recalibration for RF3053
rt2x00: rt2800lib: enable RF3053 support
rt2x00: rt2800lib: enable RT3593 support
rt2x00: rt2800usb: use correct [RT]XWI size for RT3593
rt2x00: rt2800usb: add USB device ID for Linksys AE3000
drivers/net/wireless/rt2x00/Kconfig | 6 +
drivers/net/wireless/rt2x00/rt2800.h | 187 ++++-
drivers/net/wireless/rt2x00/rt2800lib.c | 1227 ++++++++++++++++++++++++++++++-
drivers/net/wireless/rt2x00/rt2800usb.c | 9 +-
drivers/net/wireless/rt2x00/rt2x00.h | 1 +
5 files changed, 1385 insertions(+), 45 deletions(-)
--
1.7.10
^ permalink raw reply
* Re: [rt2x00-users] [PATCH v2 00/20] rt2x00: add experimental support for RT3593
From: Gabor Juhos @ 2013-07-08 14:08 UTC (permalink / raw)
To: Stanislaw Gruszka; +Cc: John Linville, linux-wireless, users
In-Reply-To: <20130707144233.GU2073@localhost.localdomain>
2013.07.07. 16:42 keltezéssel, Stanislaw Gruszka írta:
> On Mon, Jul 01, 2013 at 09:47:39AM +0200, Gabor Juhos wrote:
>> This patch-set implements experiemental support for the
>> RT3593 chipset. The patches are tested on the Linksys
>> AE3000 USB device only, however other USB devices which
>> are using the RT3573 chips might work as well.
>
> Good work Gabor!
Thanks!
-Gabor
^ permalink raw reply
* ath6kl.git renamed to ath.git
From: Kalle Valo @ 2013-07-08 14:02 UTC (permalink / raw)
To: linux-wireless; +Cc: ath6kl-devel
Hi,
I have renamed my ath6kl.git tree to ath.git. So all ath6kl developers,
please use the new logation for the tree:
https://github.com/kvalo/ath
I renamed it as I will start commiting both ath6kl and ath10k commits
into the same tree.
--
Kalle Valo
^ permalink raw reply
* [PATCHv3 5/5] ath9k: enable CSA functionality in ath9k
From: Simon Wunderlich @ 2013-07-08 13:14 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, Mathias Kretschmer, Simon Wunderlich
In-Reply-To: <1373289250-12259-1-git-send-email-siwu@hrz.tu-chemnitz.de>
CSA is only enabled for one interface, but the same limitation applies
for mac80211 too. It checks whether the beacon has been sent (different
approaches for non-EDMA-enabled and EDMA-enabled devices), and completes
the channel switch after that.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
Changes to PATCHv2:
* announce support for channel switch
Changes to PATCHv1:
* complete channel switch after the last beacon has been sent
---
drivers/net/wireless/ath/ath9k/ath9k.h | 2 ++
drivers/net/wireless/ath/ath9k/beacon.c | 21 +++++++++++++++++++++
drivers/net/wireless/ath/ath9k/init.c | 1 +
drivers/net/wireless/ath/ath9k/main.c | 17 +++++++++++++++++
drivers/net/wireless/ath/ath9k/xmit.c | 2 ++
5 files changed, 43 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 579ed9c..3745487 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -424,6 +424,7 @@ void ath9k_beacon_assign_slot(struct ath_softc *sc, struct ieee80211_vif *vif);
void ath9k_beacon_remove_slot(struct ath_softc *sc, struct ieee80211_vif *vif);
void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif);
void ath9k_set_beacon(struct ath_softc *sc);
+bool ath9k_csa_is_finished(struct ath_softc *sc);
/*******************/
/* Link Monitoring */
@@ -751,6 +752,7 @@ struct ath_softc {
#endif
struct ath_descdma txsdma;
+ struct ieee80211_vif *csa_vif;
struct ath_ant_comb ant_comb;
u8 ant_tx, ant_rx;
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index fd1eeba..e400151 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -310,6 +310,23 @@ void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif)
(unsigned long long)tsfadjust, avp->av_bslot);
}
+bool ath9k_csa_is_finished(struct ath_softc *sc)
+{
+ struct ieee80211_vif *vif;
+
+ vif = sc->csa_vif;
+ if (!vif || !vif->csa_active)
+ return false;
+
+ if (!ieee80211_csa_is_complete(vif))
+ return false;
+
+ ieee80211_csa_finish(vif);
+ vif->csa_active = 0;
+ sc->csa_vif = NULL;
+ return true;
+}
+
void ath9k_beacon_tasklet(unsigned long data)
{
struct ath_softc *sc = (struct ath_softc *)data;
@@ -355,6 +372,10 @@ void ath9k_beacon_tasklet(unsigned long data)
return;
}
+ /* EDMA devices check that in the tx completion function. */
+ if (!edma && ath9k_csa_is_finished(sc))
+ return;
+
slot = ath9k_beacon_choose_slot(sc);
vif = sc->beacon.bslot[slot];
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index f359b0d..3ce83c4 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -807,6 +807,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;
hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
+ hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
#ifdef CONFIG_PM_SLEEP
if ((ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) &&
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index d1ce3da..6844968 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1026,6 +1026,9 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
if (ath9k_uses_beacons(vif->type))
ath9k_beacon_remove_slot(sc, vif);
+ if (sc->csa_vif == vif)
+ sc->csa_vif = NULL;
+
ath9k_ps_wakeup(sc);
ath9k_calculate_summary_state(hw, NULL);
ath9k_ps_restore(sc);
@@ -2319,6 +2322,19 @@ static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
clear_bit(SC_OP_SCANNING, &sc->sc_flags);
}
+static void ath9k_channel_switch_beacon(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_chan_def *chandef)
+{
+ struct ath_softc *sc = hw->priv;
+
+ /* mac80211 does not support CSA in multi-if cases (yet) */
+ if (WARN_ON(sc->csa_vif))
+ return;
+
+ sc->csa_vif = vif;
+}
+
struct ieee80211_ops ath9k_ops = {
.tx = ath9k_tx,
.start = ath9k_start,
@@ -2366,4 +2382,5 @@ struct ieee80211_ops ath9k_ops = {
#endif
.sw_scan_start = ath9k_sw_scan_start,
.sw_scan_complete = ath9k_sw_scan_complete,
+ .channel_switch_beacon = ath9k_channel_switch_beacon,
};
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index eab0fcb..cec670d 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2282,6 +2282,8 @@ void ath_tx_edma_tasklet(struct ath_softc *sc)
if (ts.qid == sc->beacon.beaconq) {
sc->beacon.tx_processed = true;
sc->beacon.tx_last = !(ts.ts_status & ATH9K_TXERR_MASK);
+
+ ath9k_csa_is_finished(sc);
continue;
}
--
1.7.10.4
^ permalink raw reply related
* [PATCHv3 4/5] mac80211: add channel switch command and beacon callbacks
From: Simon Wunderlich @ 2013-07-08 13:14 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, Mathias Kretschmer, Simon Wunderlich
In-Reply-To: <1373289250-12259-1-git-send-email-siwu@hrz.tu-chemnitz.de>
The count field in CSA must be decremented with each beacon
transmitted. This patch implements the functionality for drivers
using ieee80211_beacon_get(). Other drivers must call back manually
after reaching count == 0.
This patch also contains the handling and finish worker for the channel
switch command.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
Changes to PATCHv2:
* fix documentation and style stuff
* update tracing
* change csa_active to bool
* check if csa_active when assigning beacons
* fix locking and access
* use new ieee80211_vif_change_channel to change the channel
Changes to PATCHv1:
* don't switch when CAC is active
* add hw to parameters for driver
Changes to RFCv1:
* use beacons as supplied from nl80211 without generating/parsing them
* update beacons using offsets
* report back by calling the channel switch event in cfg80211
---
include/net/mac80211.h | 34 +++++++++++++
net/mac80211/cfg.c | 116 +++++++++++++++++++++++++++++++++++++++++++-
net/mac80211/driver-ops.h | 13 +++++
net/mac80211/ieee80211_i.h | 13 +++++
net/mac80211/iface.c | 2 +
net/mac80211/trace.h | 26 ++++++++++
net/mac80211/tx.c | 80 ++++++++++++++++++++++++++++++
7 files changed, 282 insertions(+), 2 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index aadf4eb..0eb636b 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1084,6 +1084,7 @@ enum ieee80211_vif_flags {
* @addr: address of this interface
* @p2p: indicates whether this AP or STA interface is a p2p
* interface, i.e. a GO or p2p-sta respectively
+ * @csa_active: marks whether a channel switch is going on
* @driver_flags: flags/capabilities the driver has for this interface,
* these need to be set (or cleared) when the interface is added
* or, if supported by the driver, the interface type is changed
@@ -1106,6 +1107,7 @@ struct ieee80211_vif {
struct ieee80211_bss_conf bss_conf;
u8 addr[ETH_ALEN];
bool p2p;
+ bool csa_active;
u8 cab_queue;
u8 hw_queue[IEEE80211_NUM_ACS];
@@ -2637,6 +2639,16 @@ enum ieee80211_roc_type {
* @ipv6_addr_change: IPv6 address assignment on the given interface changed.
* Currently, this is only called for managed or P2P client interfaces.
* This callback is optional; it must not sleep.
+ *
+ * @channel_switch_beacon: Starts a channel switch to a new channel.
+ * Beacons are modified to include CSA or ECSA IEs before calling this
+ * function. The corresponding count fields in these IEs must be
+ * decremented, and when they reach zero the driver must call
+ * ieee80211_csa_finish(). Drivers which use ieee80211_beacon_get()
+ * get the csa counter decremented by mac80211, but must check if it is
+ * zero using ieee80211_csa_is_complete() after the beacon has been
+ * transmitted and then call ieee80211_csa_finish().
+ *
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw,
@@ -2824,6 +2836,9 @@ struct ieee80211_ops {
struct ieee80211_vif *vif,
struct inet6_dev *idev);
#endif
+ void (*channel_switch_beacon)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_chan_def *chandef);
};
/**
@@ -3319,6 +3334,25 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
}
/**
+ * ieee80211_csa_finish - notify mac80211 about channel switch
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * After a channel switch announcement was scheduled and the counter in this
+ * announcement hit zero, this function must be called by the driver to
+ * notify mac80211 that the channel can be changed.
+ */
+void ieee80211_csa_finish(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_csa_is_complete - find out if counters reached zero
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * This function returns whether the channel switch counters reached zero.
+ */
+bool ieee80211_csa_is_complete(struct ieee80211_vif *vif);
+
+
+/**
* ieee80211_proberesp_get - retrieve a Probe Response template
* @hw: pointer obtained from ieee80211_alloc_hw().
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index a99c9a8..b32e4db 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -854,8 +854,8 @@ static int ieee80211_set_probe_resp(struct ieee80211_sub_if_data *sdata,
return 0;
}
-static int ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata,
- struct cfg80211_beacon_data *params)
+int ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_beacon_data *params)
{
struct beacon_data *new, *old;
int new_head_len, new_tail_len;
@@ -1018,6 +1018,12 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ /* don't allow changing the beacon while CSA is in place - offset
+ * of channel switch counter may change
+ */
+ if (sdata->vif.csa_active)
+ return -EBUSY;
+
old = rtnl_dereference(sdata->u.ap.beacon);
if (!old)
return -ENOENT;
@@ -2840,6 +2846,111 @@ cfg80211_beacon_dup(struct cfg80211_beacon_data *beacon)
return new_beacon;
}
+void ieee80211_csa_finalize_work(struct work_struct *work)
+{
+ struct ieee80211_sub_if_data *sdata =
+ container_of(work, struct ieee80211_sub_if_data,
+ csa_finalize_work);
+ struct ieee80211_local *local = sdata->local;
+ int err, changed;
+
+ if (!ieee80211_sdata_running(sdata))
+ return;
+
+ if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_AP))
+ return;
+
+ sdata->radar_required = sdata->csa_radar_required;
+ err = ieee80211_vif_change_channel(sdata, &local->csa_chandef,
+ &changed);
+ if (WARN_ON(err < 0))
+ return;
+
+ err = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon);
+ if (err < 0)
+ return;
+
+ changed |= err;
+ kfree(sdata->u.ap.next_beacon);
+ sdata->u.ap.next_beacon = NULL;
+
+ ieee80211_wake_queues_by_reason(&sdata->local->hw,
+ IEEE80211_MAX_QUEUE_MAP,
+ IEEE80211_QUEUE_STOP_REASON_CSA);
+
+ ieee80211_bss_info_change_notify(sdata, changed);
+
+ cfg80211_ch_switch_notify(sdata->dev, &local->csa_chandef);
+}
+
+static int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_csa_settings *params)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_chanctx_conf *chanctx_conf;
+ struct ieee80211_chanctx *chanctx;
+ int err;
+
+ if (!list_empty(&local->roc_list) || local->scanning)
+ return -EBUSY;
+
+ if (sdata->wdev.cac_started)
+ return -EBUSY;
+
+ /* don't handle if chanctx is used */
+ if (local->use_chanctx)
+ return -EBUSY;
+
+ rcu_read_lock();
+ chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+ if (!chanctx_conf) {
+ rcu_read_unlock();
+ return -EBUSY;
+ }
+
+ /* don't handle for multi-VIF cases */
+ chanctx = container_of(chanctx_conf, struct ieee80211_chanctx, conf);
+ if (chanctx->refcount > 1) {
+ rcu_read_unlock();
+ return -EBUSY;
+ }
+ rcu_read_unlock();
+
+ /* only handle AP for now. */
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_AP:
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ sdata->u.ap.next_beacon = cfg80211_beacon_dup(¶ms->beacon_after);
+ if (!sdata->u.ap.next_beacon)
+ return -ENOMEM;
+
+ sdata->csa_counter_offset_beacon = params->counter_offset_beacon;
+ sdata->csa_counter_offset_presp = params->counter_offset_presp;
+ sdata->csa_radar_required = params->radar_required;
+
+ if (params->block_tx)
+ ieee80211_stop_queues_by_reason(&local->hw,
+ IEEE80211_MAX_QUEUE_MAP,
+ IEEE80211_QUEUE_STOP_REASON_CSA);
+
+ err = ieee80211_assign_beacon(sdata, ¶ms->beacon_csa);
+ if (err < 0)
+ return err;
+
+ local->csa_chandef = params->chandef;
+ sdata->vif.csa_active = true;
+
+ ieee80211_bss_info_change_notify(sdata, err);
+ drv_channel_switch_beacon(sdata, ¶ms->chandef);
+
+ return 0;
+}
+
static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
struct ieee80211_channel *chan, bool offchan,
unsigned int wait, const u8 *buf, size_t len,
@@ -3557,4 +3668,5 @@ struct cfg80211_ops mac80211_config_ops = {
.get_et_strings = ieee80211_get_et_strings,
.get_channel = ieee80211_cfg_get_channel,
.start_radar_detection = ieee80211_start_radar_detection,
+ .channel_switch = ieee80211_channel_switch,
};
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index b931c96..b3ea11f 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -1072,4 +1072,17 @@ static inline void drv_ipv6_addr_change(struct ieee80211_local *local,
}
#endif
+static inline void
+drv_channel_switch_beacon(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_chan_def *chandef)
+{
+ struct ieee80211_local *local = sdata->local;
+
+ if (local->ops->channel_switch_beacon) {
+ trace_drv_channel_switch_beacon(local, sdata, chandef);
+ local->ops->channel_switch_beacon(&local->hw, &sdata->vif,
+ chandef);
+ }
+}
+
#endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index e34eb5f..2a22379 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -259,6 +259,8 @@ struct ieee80211_if_ap {
struct beacon_data __rcu *beacon;
struct probe_resp __rcu *probe_resp;
+ /* to be used after channel switch. */
+ struct cfg80211_beacon_data *next_beacon;
struct list_head vlans;
struct ps_data ps;
@@ -716,6 +718,11 @@ struct ieee80211_sub_if_data {
struct ieee80211_tx_queue_params tx_conf[IEEE80211_NUM_ACS];
+ struct work_struct csa_finalize_work;
+ int csa_counter_offset_beacon;
+ int csa_counter_offset_presp;
+ bool csa_radar_required;
+
/* used to reconfigure hardware SM PS */
struct work_struct recalc_smps;
@@ -1344,6 +1351,9 @@ void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc, bool free);
void ieee80211_sw_roc_work(struct work_struct *work);
void ieee80211_handle_roc_started(struct ieee80211_roc_work *roc);
+/* channel switch handling */
+void ieee80211_csa_finalize_work(struct work_struct *work);
+
/* interface handling */
int ieee80211_iface_init(void);
void ieee80211_iface_exit(void);
@@ -1365,6 +1375,9 @@ void ieee80211_del_virtual_monitor(struct ieee80211_local *local);
bool __ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata);
void ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata);
+int ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_beacon_data *params);
+
static inline bool ieee80211_sdata_running(struct ieee80211_sub_if_data *sdata)
{
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index a2a8250..671fe7c 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -804,6 +804,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
cancel_work_sync(&local->dynamic_ps_enable_work);
cancel_work_sync(&sdata->recalc_smps);
+ cancel_work_sync(&sdata->csa_finalize_work);
cancel_delayed_work_sync(&sdata->dfs_cac_timer_work);
@@ -1267,6 +1268,7 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
skb_queue_head_init(&sdata->skb_queue);
INIT_WORK(&sdata->work, ieee80211_iface_work);
INIT_WORK(&sdata->recalc_smps, ieee80211_recalc_smps_work);
+ INIT_WORK(&sdata->csa_finalize_work, ieee80211_csa_finalize_work);
switch (type) {
case NL80211_IFTYPE_P2P_GO:
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index c215fafd7..1aba645 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -1906,6 +1906,32 @@ TRACE_EVENT(api_radar_detected,
)
);
+TRACE_EVENT(drv_channel_switch_beacon,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_chan_def *chandef),
+
+ TP_ARGS(local, sdata, chandef),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ VIF_ENTRY
+ CHANDEF_ENTRY
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ VIF_ASSIGN;
+ CHANDEF_ASSIGN(chandef);
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT VIF_PR_FMT " channel switch to " CHANDEF_PR_FMT,
+ LOCAL_PR_ARG, VIF_PR_ARG, CHANDEF_PR_ARG
+ )
+);
+
+
#ifdef CONFIG_MAC80211_MESSAGE_TRACING
#undef TRACE_SYSTEM
#define TRACE_SYSTEM mac80211_msg
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 4105d0c..76b2538 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2320,6 +2320,83 @@ static int ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata,
return 0;
}
+void ieee80211_csa_finish(struct ieee80211_vif *vif)
+{
+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+ vif->csa_active = false;
+ ieee80211_queue_work(&sdata->local->hw,
+ &sdata->csa_finalize_work);
+}
+EXPORT_SYMBOL(ieee80211_csa_finish);
+
+static void ieee80211_update_csa(struct ieee80211_sub_if_data *sdata,
+ struct beacon_data *beacon)
+{
+ struct probe_resp *resp;
+ int counter_offset_beacon = sdata->csa_counter_offset_beacon;
+ int counter_offset_presp = sdata->csa_counter_offset_presp;
+
+ /* warn if the driver did not check for/react to csa completeness */
+ if (WARN_ON(((u8 *)beacon->tail)[counter_offset_beacon] == 0))
+ return;
+
+ ((u8 *)beacon->tail)[counter_offset_beacon]--;
+
+ if (!counter_offset_presp)
+ return;
+
+ if (sdata->vif.type == NL80211_IFTYPE_AP) {
+ rcu_read_lock();
+ resp = rcu_dereference(sdata->u.ap.probe_resp);
+
+ /* if nl80211 accepted the offset, this should not happen. */
+ if (WARN_ON(!resp)) {
+ rcu_read_unlock();
+ return;
+ }
+ resp->data[counter_offset_presp]--;
+ }
+}
+
+bool ieee80211_csa_is_complete(struct ieee80211_vif *vif)
+{
+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+ struct beacon_data *beacon = NULL;
+ u8 *beacon_data;
+ size_t beacon_data_len;
+ int counter_beacon = sdata->csa_counter_offset_beacon;
+ int ret = false;
+
+ if (!ieee80211_sdata_running(sdata))
+ return false;
+
+ rcu_read_lock();
+ if (vif->type == NL80211_IFTYPE_AP) {
+ struct ieee80211_if_ap *ap = &sdata->u.ap;
+
+ beacon = rcu_dereference(ap->beacon);
+ if (WARN_ON(!beacon || !beacon->tail))
+ goto out;
+ beacon_data = beacon->tail;
+ beacon_data_len = beacon->tail_len;
+ } else {
+ WARN_ON(1);
+ goto out;
+ }
+
+ if (WARN_ON(counter_beacon > beacon_data_len))
+ goto out;
+
+ if (beacon_data[counter_beacon] == 0)
+ ret = true;
+ out:
+ rcu_read_unlock();
+
+ return ret;
+}
+EXPORT_SYMBOL(ieee80211_csa_is_complete);
+
struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
u16 *tim_offset, u16 *tim_length)
@@ -2350,6 +2427,9 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
struct beacon_data *beacon = rcu_dereference(ap->beacon);
if (beacon) {
+ if (sdata->vif.csa_active)
+ ieee80211_update_csa(sdata, beacon);
+
/*
* headroom, head length,
* tail length and maximum TIM length
--
1.7.10.4
^ permalink raw reply related
* [PATCHv3 1/5] nl80211/cfg80211: add channel switch command
From: Simon Wunderlich @ 2013-07-08 13:14 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, Mathias Kretschmer, Simon Wunderlich
In-Reply-To: <1373289250-12259-1-git-send-email-siwu@hrz.tu-chemnitz.de>
To allow channel switch announcements within beacons, add
the channel switch command to nl80211/cfg80211. This is
implementation is intended for AP and (later) IBSS mode.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
Changes to PATCHv2:
* define csa_ies as static to save stack size
* add wiphy flag and cmd for channel_switch
* move NL80211_ATTR_CSA_C_OFF_BEACON into csa_ies
Changes to RFCv1:
* accept and pass CSA IEs and after-change IEs
* use parameter structure instead of individual parameters
---
include/net/cfg80211.h | 30 ++++++++++
include/uapi/linux/nl80211.h | 29 ++++++++++
net/wireless/nl80211.c | 126 +++++++++++++++++++++++++++++++++++++++++-
3 files changed, 184 insertions(+), 1 deletion(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 4940960..249ac42 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -639,6 +639,30 @@ struct cfg80211_ap_settings {
};
/**
+ * struct cfg80211_csa_settings - channel switch settings
+ *
+ * Used for channel switch
+ *
+ * @chandef: defines the channel to use after the switch
+ * @beacon_csa: beacon data while performing the switch
+ * @counter_offset_beacon: offset for the counter within the beacon (tail)
+ * @counter_offset_presp: offset for the counter within the probe response
+ * @beacon_after: beacon data to be used on the new channel
+ * @radar_required: whether radar detection is required on the new channel
+ * @block_tx: whether transmissions should be blocked while changing
+ * @count: number of beacons until switch
+ */
+struct cfg80211_csa_settings {
+ struct cfg80211_chan_def chandef;
+ struct cfg80211_beacon_data beacon_csa;
+ u16 counter_offset_beacon, counter_offset_presp;
+ struct cfg80211_beacon_data beacon_after;
+ bool radar_required;
+ bool block_tx;
+ u8 count;
+};
+
+/**
* enum station_parameters_apply_mask - station parameter values to apply
* @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
* @STATION_PARAM_APPLY_CAPABILITY: apply new capability
@@ -2311,6 +2335,9 @@ struct cfg80211_ops {
u16 duration);
void (*crit_proto_stop)(struct wiphy *wiphy,
struct wireless_dev *wdev);
+ int (*channel_switch)(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct cfg80211_csa_settings *params);
};
/*
@@ -2376,6 +2403,8 @@ struct cfg80211_ops {
* @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX.
* @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call.
* @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels.
+ * @WIPHY_FLAG_HAS_CHANNEL_SWITCH_BEACON: Device supports channel switch in
+ * beaconing mode (AP, IBSS, Mesh, ...).
*/
enum wiphy_flags {
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
@@ -2400,6 +2429,7 @@ enum wiphy_flags {
WIPHY_FLAG_OFFCHAN_TX = BIT(20),
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21),
WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22),
+ WIPHY_FLAG_HAS_CHANNEL_SWITCH = BIT(23),
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index de0ce80..4049cb8 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -648,6 +648,16 @@
* @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can
* return back to normal.
*
+ * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the
+ * the new channel information (Channel Switch Announcement - CSA)
+ * in the beacon for some time (as defined in the
+ * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the
+ * new channel. Userspace provides the new channel information (using
+ * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel
+ * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform
+ * other station that transmission must be blocked until the channel
+ * switch is complete.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -810,6 +820,7 @@ enum nl80211_commands {
NL80211_CMD_CRIT_PROTOCOL_START,
NL80211_CMD_CRIT_PROTOCOL_STOP,
+ NL80211_CMD_CHANNEL_SWITCH,
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1436,6 +1447,18 @@ enum nl80211_commands {
* allowed to be used with the first @NL80211_CMD_SET_STATION command to
* update a TDLS peer STA entry.
*
+ * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's
+ * until the channel switch event.
+ * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
+ * must be blocked on the current channel (before the channel switch
+ * operation).
+ * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
+ * for the time while performing a channel switch.
+ * @NL80211_ATTR_CSA_C_OFF_BEACON: Offset of the channel switch counter
+ * field in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
+ * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter
+ * field in the probe response (%NL80211_ATTR_PROBE_RESP).
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1736,6 +1759,12 @@ enum nl80211_attrs {
NL80211_ATTR_PEER_AID,
+ NL80211_ATTR_CH_SWITCH_COUNT,
+ NL80211_ATTR_CH_SWITCH_BLOCK_TX,
+ NL80211_ATTR_CSA_IES,
+ NL80211_ATTR_CSA_C_OFF_BEACON,
+ NL80211_ATTR_CSA_C_OFF_PRESP,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index be64cd4..4e86a56 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -349,6 +349,11 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
[NL80211_ATTR_IE_RIC] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_PEER_AID] = { .type = NLA_U16 },
+ [NL80211_ATTR_CH_SWITCH_COUNT] = { .type = NLA_U32 },
+ [NL80211_ATTR_CH_SWITCH_BLOCK_TX] = { .type = NLA_FLAG },
+ [NL80211_ATTR_CSA_IES] = { .type = NLA_NESTED },
+ [NL80211_ATTR_CSA_C_OFF_BEACON] = { .type = NLA_U16 },
+ [NL80211_ATTR_CSA_C_OFF_PRESP] = { .type = NLA_U16 },
};
/* policy for the key attributes */
@@ -1393,6 +1398,8 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *dev,
if (state->split) {
CMD(crit_proto_start, CRIT_PROTOCOL_START);
CMD(crit_proto_stop, CRIT_PROTOCOL_STOP);
+ if (dev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH)
+ CMD(channel_switch, CHANNEL_SWITCH);
}
#ifdef CONFIG_NL80211_TESTMODE
@@ -5576,6 +5583,115 @@ static int nl80211_start_radar_detection(struct sk_buff *skb,
return err;
}
+static int nl80211_channel_switch(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_csa_settings params;
+ /* csa_ies is defined static to avoid waste of stack size - this
+ * function is called under RTNL lock, so this should not be a problem.
+ */
+ static struct nlattr *csa_ies[NL80211_ATTR_MAX+1];
+ u8 radar_detect_width = 0;
+ int err;
+
+ if (!rdev->ops->channel_switch ||
+ !(rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH))
+ return -EOPNOTSUPP;
+
+ /* may add IBSS support later */
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+ dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
+ return -EOPNOTSUPP;
+
+ memset(¶ms, 0, sizeof(params));
+
+ if (!info->attrs[NL80211_ATTR_WIPHY_FREQ] ||
+ !info->attrs[NL80211_ATTR_CH_SWITCH_COUNT])
+ return -EINVAL;
+
+ /* only important for AP, IBSS and mesh create IEs internally */
+ if (!info->attrs[NL80211_ATTR_CSA_IES])
+ return -EINVAL;
+
+ /* useless if AP is not running */
+ if (!wdev->beacon_interval)
+ return -EINVAL;
+
+ params.count = nla_get_u32(info->attrs[NL80211_ATTR_CH_SWITCH_COUNT]);
+
+ err = nl80211_parse_beacon(info->attrs, ¶ms.beacon_after);
+ if (err)
+ return err;
+
+ err = nla_parse_nested(csa_ies, NL80211_ATTR_MAX,
+ info->attrs[NL80211_ATTR_CSA_IES],
+ nl80211_policy);
+ if (err)
+ return err;
+
+ err = nl80211_parse_beacon(csa_ies, ¶ms.beacon_csa);
+ if (err)
+ return err;
+
+ if (!csa_ies[NL80211_ATTR_CSA_C_OFF_BEACON])
+ return -EINVAL;
+
+ params.counter_offset_beacon =
+ nla_get_u16(csa_ies[NL80211_ATTR_CSA_C_OFF_BEACON]);
+ if (params.counter_offset_beacon > params.beacon_csa.tail_len)
+ return -EINVAL;
+
+ /* sanity check - counter should be the same this should be the same */
+ if (params.beacon_csa.tail[params.counter_offset_beacon] !=
+ params.count)
+ return -EINVAL;
+
+ if (csa_ies[NL80211_ATTR_CSA_C_OFF_PRESP]) {
+ params.counter_offset_presp =
+ nla_get_u16(csa_ies[NL80211_ATTR_CSA_C_OFF_PRESP]);
+ if (params.counter_offset_presp >
+ params.beacon_csa.probe_resp_len)
+ return -EINVAL;
+
+ if (params.beacon_csa.probe_resp[params.counter_offset_presp] !=
+ params.count)
+ return -EINVAL;
+ }
+
+ err = nl80211_parse_chandef(rdev, info, ¶ms.chandef);
+ if (err)
+ return err;
+
+ if (!cfg80211_reg_can_beacon(&rdev->wiphy, ¶ms.chandef))
+ return -EINVAL;
+
+ err = cfg80211_chandef_dfs_required(wdev->wiphy, ¶ms.chandef);
+ if (err < 0)
+ return err;
+
+ if (err)
+ radar_detect_width = BIT(params.chandef.width);
+ else
+ radar_detect_width = 0;
+
+ err = cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype,
+ params.chandef.chan,
+ CHAN_MODE_SHARED,
+ radar_detect_width);
+ if (err)
+ return err;
+
+ if (info->attrs[NL80211_ATTR_CH_SWITCH_BLOCK_TX])
+ params.block_tx = true;
+
+ err = rdev->ops->channel_switch(&rdev->wiphy, dev, ¶ms);
+
+ return err;
+}
+
static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb,
u32 seq, int flags,
struct cfg80211_registered_device *rdev,
@@ -9048,7 +9164,15 @@ static struct genl_ops nl80211_ops[] = {
.flags = GENL_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
- }
+ },
+ {
+ .cmd = NL80211_CMD_CHANNEL_SWITCH,
+ .doit = nl80211_channel_switch,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {
--
1.7.10.4
^ permalink raw reply related
* [PATCHv3 3/5] mac80211: allow chanctx to change channels
From: Simon Wunderlich @ 2013-07-08 13:14 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, Mathias Kretschmer, Simon Wunderlich
In-Reply-To: <1373289250-12259-1-git-send-email-siwu@hrz.tu-chemnitz.de>
This adds mac80211/chanctx code to allow to change a channel definition
of an active channel context. This will be used for the channel switch
command added later.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
include/net/mac80211.h | 4 ++++
net/mac80211/chan.c | 55 ++++++++++++++++++++++++++++++++++++++++++++
net/mac80211/ieee80211_i.h | 4 ++++
3 files changed, 63 insertions(+)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 7c5dc78..aadf4eb 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -152,11 +152,13 @@ struct ieee80211_low_level_stats {
* @IEEE80211_CHANCTX_CHANGE_WIDTH: The channel width changed
* @IEEE80211_CHANCTX_CHANGE_RX_CHAINS: The number of RX chains changed
* @IEEE80211_CHANCTX_CHANGE_RADAR: radar detection flag changed
+ * @IEEE80211_CHANCTX_CHANGE_CHANNEL: switched to another operating channel
*/
enum ieee80211_chanctx_change {
IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0),
IEEE80211_CHANCTX_CHANGE_RX_CHAINS = BIT(1),
IEEE80211_CHANCTX_CHANGE_RADAR = BIT(2),
+ IEEE80211_CHANCTX_CHANGE_CHANNEL = BIT(3)
};
/**
@@ -222,6 +224,7 @@ struct ieee80211_chanctx_conf {
* @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed,
* note that this is only called when it changes after the channel
* context had been assigned.
+ * @BSS_CHANGED_CHANNEL: The operating channel of this interface changed.
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -246,6 +249,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_P2P_PS = 1<<19,
BSS_CHANGED_BEACON_INFO = 1<<20,
BSS_CHANGED_BANDWIDTH = 1<<21,
+ BSS_CHANGED_CHANNEL = 1<<22,
/* when adding here, make sure to change ieee80211_reconfig */
};
diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index 03e8d2e..7816703 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -410,6 +410,61 @@ int ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata,
return ret;
}
+int ieee80211_vif_change_channel(struct ieee80211_sub_if_data *sdata,
+ const struct cfg80211_chan_def *chandef,
+ u32 *changed)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_chanctx_conf *conf;
+ struct ieee80211_chanctx *ctx;
+ int ret;
+ u32 chanctx_changed = 0;
+
+ if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
+ IEEE80211_CHAN_DISABLED))
+ return -EINVAL;
+
+ mutex_lock(&local->chanctx_mtx);
+ conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
+ lockdep_is_held(&local->chanctx_mtx));
+ if (!conf) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ctx = container_of(conf, struct ieee80211_chanctx, conf);
+ if (ctx->refcount != 1) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (sdata->vif.bss_conf.chandef.width != chandef->width) {
+ chanctx_changed = IEEE80211_CHANCTX_CHANGE_WIDTH;
+ *changed |= BSS_CHANGED_BANDWIDTH;
+ }
+
+ sdata->vif.bss_conf.chandef = *chandef;
+ ctx->conf.def = *chandef;
+
+ chanctx_changed |= IEEE80211_CHANCTX_CHANGE_CHANNEL;
+ *changed |= BSS_CHANGED_CHANNEL;
+ drv_change_chanctx(local, ctx, chanctx_changed);
+
+ if (!local->use_chanctx) {
+ local->_oper_chandef = *chandef;
+ ieee80211_hw_config(local, 0);
+ }
+
+ ieee80211_recalc_chanctx_chantype(local, ctx);
+ ieee80211_recalc_smps_chanctx(local, ctx);
+ ieee80211_recalc_radar_chanctx(local, ctx);
+
+ ret = 0;
+ out:
+ mutex_unlock(&local->chanctx_mtx);
+ return ret;
+}
+
int ieee80211_vif_change_bandwidth(struct ieee80211_sub_if_data *sdata,
const struct cfg80211_chan_def *chandef,
u32 *changed)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 683751a..e34eb5f 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1625,6 +1625,10 @@ int __must_check
ieee80211_vif_change_bandwidth(struct ieee80211_sub_if_data *sdata,
const struct cfg80211_chan_def *chandef,
u32 *changed);
+int __must_check
+ieee80211_vif_change_channel(struct ieee80211_sub_if_data *sdata,
+ const struct cfg80211_chan_def *chandef,
+ u32 *changed);
void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata);
void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata);
void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata,
--
1.7.10.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox