Linux IEEE 802.15.4 and 6LoWPAN development
 help / color / mirror / Atom feed
From: Stefan Schmidt <stefan@osg.samsung.com>
To: Alexander Aring <alex.aring@gmail.com>, linux-wpan@vger.kernel.org
Cc: kernel@pengutronix.de
Subject: Re: [RFC 07/16] ieee802154: 6lowpan: change skb->dev earlier
Date: Wed, 12 Aug 2015 11:13:57 +0200	[thread overview]
Message-ID: <55CB0E55.5080705@osg.samsung.com> (raw)
In-Reply-To: <1438583035-6287-8-git-send-email-alex.aring@gmail.com>

Hello.

On 03/08/15 08:23, Alexander Aring wrote:
> We should change the skb->dev pointer earlier to the lowpan interface.
> Sometimes we call iphc_decompress which also use some netdev printout
> functionality. This patch will change that the correct interface will be
> displayed in this case, which should be the lowpan interface.
>
> Signed-off-by: Alexander Aring<alex.aring@gmail.com>
> ---
>   net/ieee802154/6lowpan/rx.c | 14 +++++++-------
>   1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/net/ieee802154/6lowpan/rx.c b/net/ieee802154/6lowpan/rx.c
> index 11a5629..3871804a 100644
> --- a/net/ieee802154/6lowpan/rx.c
> +++ b/net/ieee802154/6lowpan/rx.c
> @@ -15,10 +15,8 @@
>   
>   #include "6lowpan_i.h"
>   
> -static int lowpan_give_skb_to_device(struct sk_buff *skb,
> -				     struct net_device *wdev)
> +static int lowpan_give_skb_to_device(struct sk_buff *skb)
>   {
> -	skb->dev = wdev->ieee802154_ptr->lowpan_dev;
>   	skb->protocol = htons(ETH_P_IPV6);
>   	skb->pkt_type = PACKET_HOST;
>   
> @@ -73,11 +71,13 @@ static int lowpan_rcv(struct sk_buff *skb, struct net_device *wdev,
>   	if (ieee802154_hdr_peek_addrs(skb, &hdr) < 0)
>   		goto drop_skb;
>   
> +	skb->dev = wdev->ieee802154_ptr->lowpan_dev;
> +
>   	/* check that it's our buffer */
>   	if (skb->data[0] == LOWPAN_DISPATCH_IPV6) {
>   		/* Pull off the 1-byte of 6lowpan header. */
>   		skb_pull(skb, 1);
> -		return lowpan_give_skb_to_device(skb, wdev);
> +		return lowpan_give_skb_to_device(skb);
>   	} else {
>   		switch (skb->data[0] & 0xe0) {
>   		case LOWPAN_DISPATCH_IPHC:	/* ipv6 datagram */
> @@ -85,7 +85,7 @@ static int lowpan_rcv(struct sk_buff *skb, struct net_device *wdev,
>   			if (ret < 0)
>   				goto drop_skb;
>   
> -			return lowpan_give_skb_to_device(skb, wdev);
> +			return lowpan_give_skb_to_device(skb);
>   		case LOWPAN_DISPATCH_FRAG1:	/* first fragment header */
>   			ret = lowpan_frag_rcv(skb, LOWPAN_DISPATCH_FRAG1);
>   			if (ret == 1) {
> @@ -93,7 +93,7 @@ static int lowpan_rcv(struct sk_buff *skb, struct net_device *wdev,
>   				if (ret < 0)
>   					goto drop_skb;
>   
> -				return lowpan_give_skb_to_device(skb, wdev);
> +				return lowpan_give_skb_to_device(skb);
>   			} else if (ret == -1) {
>   				return NET_RX_DROP;
>   			} else {
> @@ -106,7 +106,7 @@ static int lowpan_rcv(struct sk_buff *skb, struct net_device *wdev,
>   				if (ret < 0)
>   					goto drop_skb;
>   
> -				return lowpan_give_skb_to_device(skb, wdev);
> +				return lowpan_give_skb_to_device(skb);
>   			} else if (ret == -1) {
>   				return NET_RX_DROP;
>   			} else {

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>

regards
Stefan Schmidt

  reply	other threads:[~2015-08-12  9:14 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-03  6:23 [RFC 00/16] ieee802154: 6lowpan: cleanup and rework dispatch evaluation Alexander Aring
2015-08-03  6:23 ` [RFC 01/16] ieee802154: 6lowpan: change dev vars to wdev and ldev Alexander Aring
2015-08-12  8:49   ` Stefan Schmidt
2015-08-03  6:23 ` [RFC 02/16] ieee802154: 6lowpan: remove set to zero Alexander Aring
2015-08-12  8:49   ` Stefan Schmidt
2015-08-03  6:23 ` [RFC 03/16] ieee802154: 6lowpan: remove EXPORT_SYMBOL Alexander Aring
2015-08-12  8:49   ` Stefan Schmidt
2015-08-03  6:23 ` [RFC 04/16] ieee802154: 6lowpan: remove check on wdev is running Alexander Aring
2015-08-12  8:49   ` Stefan Schmidt
2015-08-15 11:50   ` Alexander Aring
2015-08-03  6:23 ` [RFC 05/16] ieee802154: 6lowpan: cleanup pull of iphc bytes Alexander Aring
2015-08-12  9:03   ` Stefan Schmidt
2015-08-03  6:23 ` [RFC 06/16] ieee802154: 6lowpan: trivial checks at first Alexander Aring
2015-08-12  9:04   ` Stefan Schmidt
2015-08-12  9:21     ` Alexander Aring
2015-08-15  9:15   ` Alexander Aring
2015-08-03  6:23 ` [RFC 07/16] ieee802154: 6lowpan: change skb->dev earlier Alexander Aring
2015-08-12  9:13   ` Stefan Schmidt [this message]
2015-08-03  6:23 ` [RFC 08/16] ieee802154: 6lowpan: change frag return value handling Alexander Aring
2015-08-12  9:14   ` Stefan Schmidt
2015-08-12  9:26     ` Alexander Aring
2015-08-03  6:23 ` [RFC 09/16] ieee820154: 6lowpan: dispatch evaluation rework Alexander Aring
2015-08-12 12:51   ` Stefan Schmidt
2015-08-03  6:23 ` [RFC 10/16] ieee802154: 6lowpan: add dispatch evalualtion helpers Alexander Aring
2015-08-12 12:51   ` Stefan Schmidt
2015-08-12 13:20     ` Alexander Aring
2015-08-12 13:48       ` Stefan Schmidt
2015-08-12 13:55         ` Alexander Aring
2015-08-03  6:23 ` [RFC 11/16] ieee802154: 6lowpan: fix fragmentation dispatch mask Alexander Aring
2015-08-12 12:51   ` Stefan Schmidt
2015-08-03  6:23 ` [RFC 12/16] ieee802154: 6lowpan: add generic lowpan header check Alexander Aring
2015-08-12 13:37   ` Stefan Schmidt
2015-08-03  6:23 ` [RFC 13/16] ieee802154: 6lowpan: add handler for all dispatch values Alexander Aring
2015-08-12 13:37   ` Stefan Schmidt
2015-08-03  6:23 ` [RFC 14/16] ieee802154: 6lowpan: add check for reserved dispatch Alexander Aring
2015-08-12 13:37   ` Stefan Schmidt
2015-08-13 20:17     ` Alexander Aring
2015-08-03  6:23 ` [RFC 15/16] ieee802154: 6lowpan: check on valid 802.15.4 frame Alexander Aring
2015-08-12 13:37   ` Stefan Schmidt
2015-08-12 13:54     ` Alexander Aring
2015-08-03  6:23 ` [RFC 16/16] ieee802154: 6lowpan: remove packet type to host Alexander Aring
2015-08-12 13:37   ` Stefan Schmidt
2015-08-12  8:15 ` [RFC 00/16] ieee802154: 6lowpan: cleanup and rework dispatch evaluation Stefan Schmidt
2015-08-13  9:10   ` Stefan Schmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55CB0E55.5080705@osg.samsung.com \
    --to=stefan@osg.samsung.com \
    --cc=alex.aring@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-wpan@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox