From: Stefan Schmidt <stefan@osg.samsung.com>
To: Alexander Aring <alex.aring@gmail.com>, linux-wpan@vger.kernel.org
Cc: kernel@pengutronix.de
Subject: Re: [RFC 00/16] ieee802154: 6lowpan: cleanup and rework dispatch evaluation
Date: Thu, 13 Aug 2015 11:10:58 +0200 [thread overview]
Message-ID: <55CC5F22.1090901@osg.samsung.com> (raw)
In-Reply-To: <55CB00B8.8010909@osg.samsung.com>
Hello.
On 12/08/15 10:15, Stefan Schmidt wrote:
> Hello.
>
> On 03/08/15 08:23, Alexander Aring wrote:
>> Hi,
>>
>> this patch series contains a rework of 802.15.4 6LoWPAN receive
>> handling.
>> We need to check on some things before which never checked before, like
>> is 802.15.4 dataframe, if we can access skb->data[0] (could be that
>> skb->len
>> is 0 then), etc.
>>
>> Also various bug fixes like the masking for fragmentation dispatch
>> value which
>> is currently wrong. Also we should again check the dispatch value
>> after successful
>> reassembly a fragment, we currently assume always a iphc header
>> there. This is wrong
>> it could also be a non-compressed header. This can occur if the
>> compressed header is
>> larger than lower interface MTU size, we doesn't react on this while
>> transmit which
>> is another issue. Nevertheless we also don't reach this case at
>> worst-case compression
>> currently.
>>
>> I introduced a complete new handling for the dispatch values based on
>> mac80211
>> datatype receive handling mechanism.
>
> I'm going to review this set over the next days. Just as a heads up.
>
>> This patch series based on bluetooth-next with various pending
>> patches, I uploaded
>> the branch at:
>>
>> https://github.com/linux-wpan/linux-wpan-next/commits/802154_6lowpan_cleanup2
>>
>>
>> so everybody can test it.
>
> I tried to apply the patches directly on bluetooth-next but they did
> not apply. Guess you want to rebase them when sending out a new round.
> For now I will review the patches here and use the branch you uploaded
> for testing. Will report back later.
My testing showed no problems with this. You can add a
Tested-by: Stefan Schmidt <stefan@osg.samsung.com>
to the whole series.
regards
Stefan Schmidt
next prev parent reply other threads:[~2015-08-13 9:11 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-03 6:23 [RFC 00/16] ieee802154: 6lowpan: cleanup and rework dispatch evaluation Alexander Aring
2015-08-03 6:23 ` [RFC 01/16] ieee802154: 6lowpan: change dev vars to wdev and ldev Alexander Aring
2015-08-12 8:49 ` Stefan Schmidt
2015-08-03 6:23 ` [RFC 02/16] ieee802154: 6lowpan: remove set to zero Alexander Aring
2015-08-12 8:49 ` Stefan Schmidt
2015-08-03 6:23 ` [RFC 03/16] ieee802154: 6lowpan: remove EXPORT_SYMBOL Alexander Aring
2015-08-12 8:49 ` Stefan Schmidt
2015-08-03 6:23 ` [RFC 04/16] ieee802154: 6lowpan: remove check on wdev is running Alexander Aring
2015-08-12 8:49 ` Stefan Schmidt
2015-08-15 11:50 ` Alexander Aring
2015-08-03 6:23 ` [RFC 05/16] ieee802154: 6lowpan: cleanup pull of iphc bytes Alexander Aring
2015-08-12 9:03 ` Stefan Schmidt
2015-08-03 6:23 ` [RFC 06/16] ieee802154: 6lowpan: trivial checks at first Alexander Aring
2015-08-12 9:04 ` Stefan Schmidt
2015-08-12 9:21 ` Alexander Aring
2015-08-15 9:15 ` Alexander Aring
2015-08-03 6:23 ` [RFC 07/16] ieee802154: 6lowpan: change skb->dev earlier Alexander Aring
2015-08-12 9:13 ` Stefan Schmidt
2015-08-03 6:23 ` [RFC 08/16] ieee802154: 6lowpan: change frag return value handling Alexander Aring
2015-08-12 9:14 ` Stefan Schmidt
2015-08-12 9:26 ` Alexander Aring
2015-08-03 6:23 ` [RFC 09/16] ieee820154: 6lowpan: dispatch evaluation rework Alexander Aring
2015-08-12 12:51 ` Stefan Schmidt
2015-08-03 6:23 ` [RFC 10/16] ieee802154: 6lowpan: add dispatch evalualtion helpers Alexander Aring
2015-08-12 12:51 ` Stefan Schmidt
2015-08-12 13:20 ` Alexander Aring
2015-08-12 13:48 ` Stefan Schmidt
2015-08-12 13:55 ` Alexander Aring
2015-08-03 6:23 ` [RFC 11/16] ieee802154: 6lowpan: fix fragmentation dispatch mask Alexander Aring
2015-08-12 12:51 ` Stefan Schmidt
2015-08-03 6:23 ` [RFC 12/16] ieee802154: 6lowpan: add generic lowpan header check Alexander Aring
2015-08-12 13:37 ` Stefan Schmidt
2015-08-03 6:23 ` [RFC 13/16] ieee802154: 6lowpan: add handler for all dispatch values Alexander Aring
2015-08-12 13:37 ` Stefan Schmidt
2015-08-03 6:23 ` [RFC 14/16] ieee802154: 6lowpan: add check for reserved dispatch Alexander Aring
2015-08-12 13:37 ` Stefan Schmidt
2015-08-13 20:17 ` Alexander Aring
2015-08-03 6:23 ` [RFC 15/16] ieee802154: 6lowpan: check on valid 802.15.4 frame Alexander Aring
2015-08-12 13:37 ` Stefan Schmidt
2015-08-12 13:54 ` Alexander Aring
2015-08-03 6:23 ` [RFC 16/16] ieee802154: 6lowpan: remove packet type to host Alexander Aring
2015-08-12 13:37 ` Stefan Schmidt
2015-08-12 8:15 ` [RFC 00/16] ieee802154: 6lowpan: cleanup and rework dispatch evaluation Stefan Schmidt
2015-08-13 9:10 ` Stefan Schmidt [this message]
-- strict thread matches above, loose matches on Subject: below --
2015-08-02 11:31 Alexander Aring
2015-08-02 11:38 ` Alexander Aring
2015-08-03 6:12 ` Alexander Aring
2015-08-02 11:30 Alexander Aring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55CC5F22.1090901@osg.samsung.com \
--to=stefan@osg.samsung.com \
--cc=alex.aring@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-wpan@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox