* [PATCH] Only disable/enable LSI interrupts in EEH
From: Mike Mason @ 2009-02-10 3:07 UTC (permalink / raw)
To: linuxppc-dev; +Cc: linasvepstas, paulus, ellerman
The EEH code disables and enables interrupts during the
device recovery process. This is unnecessary for MSI
and MSI-X interrupts because they are effectively disabled
by the DMA Stopped state when an EEH error occurs. The
current code is also incorrect for MSI-X interrupts. It
doesn't take into account that MSI-X interrupts are tracked
in a different way than LSI/MSI interrupts. This
patch ensures only LSI interrupts are disabled/enabled.
The patch also includes a couple minor formatting fixes.
Signed-off-by: Mike Mason <mmlnx@us.ibm.com>
--- linux-2.6.18.ppc64-orig/arch/powerpc/platforms/pseries/eeh_driver.c 2009-01-16 10:59:59.000000000 -0800
+++ linux-2.6.18.ppc64/arch/powerpc/platforms/pseries/eeh_driver.c 2009-02-07 12:29:14.000000000 -0800
@@ -67,7 +67,7 @@ static int irq_in_use(unsigned int irq)
{
int rc = 0;
unsigned long flags;
- struct irq_desc *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_desc + irq;
spin_lock_irqsave(&desc->lock, flags);
if (desc->action)
@@ -76,6 +76,40 @@ static int irq_in_use(unsigned int irq)
return rc;
}
+/**
+ * eeh_disable_irq - disable interrupt for the recovering device
+ */
+void eeh_disable_irq(struct pci_dev *dev)
+{
+ struct device_node *dn = pci_device_to_OF_node(dev);
+
+ /* Don't disable MSI and MSI-X interrupts. They are
+ * effectively disabled by the DMA Stopped state
+ * when an EEH error occurs.
+ */
+ if (dev->msi_enabled || dev->msix_enabled)
+ return;
+
+ if (!irq_in_use(dev->irq))
+ return;
+
+ PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED;
+ disable_irq_nosync(dev->irq);
+}
+
+/**
+ * eeh_enable_irq - enable interrupt for the recovering device
+ */
+void eeh_enable_irq(struct pci_dev *dev)
+{
+ struct device_node *dn = pci_device_to_OF_node(dev);
+
+ if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) {
+ PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED;
+ enable_irq(dev->irq);
+ }
+}
+
/* ------------------------------------------------------- */
/**
* eeh_report_error - report pci error to each device driver
@@ -95,11 +129,8 @@ static void eeh_report_error(struct pci_
if (!driver)
return;
- if (irq_in_use (dev->irq)) {
- struct device_node *dn = pci_device_to_OF_node(dev);
- PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED;
- disable_irq_nosync(dev->irq);
- }
+ eeh_disable_irq(dev);
+
if (!driver->err_handler ||
!driver->err_handler->error_detected)
return;
@@ -144,15 +175,12 @@ static void eeh_report_reset(struct pci_
{
enum pci_ers_result rc, *res = userdata;
struct pci_driver *driver = dev->driver;
- struct device_node *dn = pci_device_to_OF_node(dev);
if (!driver)
return;
- if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) {
- PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED;
- enable_irq(dev->irq);
- }
+ eeh_enable_irq(dev);
+
if (!driver->err_handler ||
!driver->err_handler->slot_reset)
return;
@@ -171,17 +199,14 @@ static void eeh_report_reset(struct pci_
static void eeh_report_resume(struct pci_dev *dev, void *userdata)
{
struct pci_driver *driver = dev->driver;
- struct device_node *dn = pci_device_to_OF_node(dev);
dev->error_state = pci_channel_io_normal;
if (!driver)
return;
- if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) {
- PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED;
- enable_irq(dev->irq);
- }
+ eeh_enable_irq(dev);
+
if (!driver->err_handler ||
!driver->err_handler->resume)
return;
@@ -205,15 +230,12 @@ static void eeh_report_failure(struct pc
if (!driver)
return;
- if (irq_in_use (dev->irq)) {
- struct device_node *dn = pci_device_to_OF_node(dev);
- PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED;
- disable_irq_nosync(dev->irq);
- }
- if (!driver->err_handler)
- return;
- if (!driver->err_handler->error_detected)
+ eeh_disable_irq(dev);
+
+ if (!driver->err_handler ||
+ !driver->err_handler->error_detected)
return;
+
driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
}
^ permalink raw reply
* Re: [PATCH] powerpc/cell: fix dependency in cpufreq
From: Michael Neuling @ 2009-02-10 2:01 UTC (permalink / raw)
To: michael, Arnd Bergmann, linuxppc-dev
In-Reply-To: <22829.1234230526@neuling.org>
[-- Attachment #1: Type: text/plain, Size: 907 bytes --]
> > > cbe_cpufreq.c uses cbe_cpufreq_has_pmi which is provided by
> > > cbe_cpufreq_pmi.c. Hence CBE_CPUFREQ depends on CBE_CPUFREQ_PMI.
> > >=20
> > > Signed-off-by: Michael Neuling <mikey@neuling.org>
> > > ---
> > > I'm not 100% sure is this the right fix. Should CBE_CPUFREQ really
> > > depend on CBE_CPUFREQ_PMI?
> >
> > No I don't think it is. Look at platforms/cell/cbe_cpufreq.h, the
> > intention seems to be that if PMI isn't built in then that variable is
> > hardcoded to 0 and we never use the pmi routines.
>
> ---
> #if defined(CONFIG_CBE_CPUFREQ_PMI) || defined(CONFIG_CBE_CPUFREQ_PMI_MODULE)
> extern bool cbe_cpufreq_has_pmi;
> #else
> #define cbe_cpufreq_has_pmi (0)
> #endif
> --
>
> So, I think this is bust. If cpufreq_pmi is in a module, how does
> cpufreq use cbe_cpufreq_has_pmi if the module is not inserted?
>
> Arnd?
FYI the config to trigger this is below...
Mikey
[-- Attachment #2: cbe_cpufreq_has_pmi-missing.config --]
[-- Type: text/plain, Size: 53482 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc4
# Tue Feb 10 10:53:43 2009
#
CONFIG_PPC64=y
#
# Processor support
#
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_HIBERNATE_64=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
CONFIG_PPC_DCR_MMIO=y
CONFIG_PPC_DCR=y
CONFIG_PPC_OF_PLATFORM_PCI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y
CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_PPC_PSERIES=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
# CONFIG_LPARCFG is not set
# CONFIG_PPC_PSERIES_DEBUG is not set
# CONFIG_PPC_SMLPAR is not set
CONFIG_PPC_ISERIES=y
#
# iSeries device drivers
#
# CONFIG_VIODASD is not set
CONFIG_VIOCD=y
# CONFIG_VIOTAPE is not set
CONFIG_VIOPATH=y
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
# CONFIG_PPC_PASEMI is not set
CONFIG_PPC_PS3=y
#
# PS3 Platform Options
#
CONFIG_PS3_ADVANCED=y
CONFIG_PS3_HTAB_SIZE=20
# CONFIG_PS3_DYNAMIC_DMA is not set
CONFIG_PS3_VUART=y
CONFIG_PS3_PS3AV=y
CONFIG_PS3_SYS_MANAGER=y
CONFIG_PS3_STORAGE=y
CONFIG_PS3_DISK=y
# CONFIG_PS3_ROM is not set
CONFIG_PS3_FLASH=y
CONFIG_PS3_LPM=y
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_COMMON=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
CONFIG_PPC_CELLEB=y
# CONFIG_PPC_CELL_QPACE is not set
#
# Cell Broadband Engine options
#
# CONFIG_SPU_FS is not set
# CONFIG_SPU_BASE is not set
CONFIG_CBE_RAS=y
# CONFIG_PPC_IBM_CELL_RESETBUTTON is not set
CONFIG_PPC_IBM_CELL_POWERBUTTON=m
CONFIG_CBE_CPUFREQ=y
CONFIG_CBE_CPUFREQ_PMI=m
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_UDBG_BEAT=y
CONFIG_XICS=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
CONFIG_U3_DART=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
# CONFIG_RTAS_PROC is not set
CONFIG_PPC_PMI=m
CONFIG_MMIO_NVRAM=y
CONFIG_MPIC_U3_HT_IRQS=y
CONFIG_IBMVIO=y
CONFIG_IBMEBUS=y
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
CONFIG_PPC_INDIRECT_IO=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPU Frequency drivers
#
# CONFIG_CPU_FREQ_PMAC64 is not set
CONFIG_AXON_RAM=m
# CONFIG_FSL_ULI1575 is not set
# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_IOMMU_VMERGE is not set
CONFIG_IOMMU_HELPER=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYP_DUMP=y
# CONFIG_IRQ_ALL_CPUS is not set
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_HAS_HASH_64K is not set
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SCHED_SMT=y
# CONFIG_PROC_DEVICETREE is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,9600 console=tty0 root=/dev/sda2"
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_STUB is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
# CONFIG_YENTA_RICOH is not set
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
# CONFIG_YENTA_TOSHIBA is not set
# CONFIG_PD6729 is not set
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
CONFIG_HOTPLUG_PCI_RPA=m
# CONFIG_HOTPLUG_PCI_RPA_DLPAR is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_RELOCATABLE=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
CONFIG_ATM=m
# CONFIG_ATM_LANE is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_X25=m
# CONFIG_LAPB is not set
CONFIG_WAN_ROUTER=m
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=y
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
# CONFIG_BT_L2CAP is not set
CONFIG_BT_SCO=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIDTL1 is not set
CONFIG_BT_HCIBT3C=m
# CONFIG_BT_HCIBLUECARD is not set
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_NL80211=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
CONFIG_NET_9P=m
CONFIG_NET_9P_DEBUG=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
CONFIG_MTD_CONCAT=m
# CONFIG_MTD_PARTITIONS is not set
CONFIG_MTD_TESTS=m
#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
CONFIG_MTD_BLKDEVS=m
# CONFIG_MTD_BLOCK is not set
CONFIG_MTD_BLOCK_RO=m
# CONFIG_FTL is not set
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
CONFIG_SSFDC=m
CONFIG_MTD_OOPS=y
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
CONFIG_MTD_PMC551_DEBUG=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=m
CONFIG_MTD_PS3VRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTDRAM_ABS_POS=0
CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=y
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=y
CONFIG_MTD_DOCECC=y
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
# CONFIG_MTD_NAND is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=y
#
# UBI debugging options
#
CONFIG_MTD_UBI_DEBUG=y
CONFIG_MTD_UBI_DEBUG_MSG=y
CONFIG_MTD_UBI_DEBUG_PARANOID=y
CONFIG_MTD_UBI_DEBUG_DISABLE_BGT=y
CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS=y
CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES=y
# CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set
#
# Additional UBI debugging messages
#
CONFIG_MTD_UBI_DEBUG_MSG_BLD=y
CONFIG_MTD_UBI_DEBUG_MSG_EBA=y
CONFIG_MTD_UBI_DEBUG_MSG_WL=y
CONFIG_MTD_UBI_DEBUG_MSG_IO=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=m
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
CONFIG_C2PORT=m
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=m
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_BLK_DEV_IDE_SATA=y
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_DELKIN is not set
# CONFIG_BLK_DEV_IDECD is not set
CONFIG_BLK_DEV_IDETAPE=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_PROC_FS is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_PLATFORM=m
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_OFFBOARD=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=m
CONFIG_BLK_DEV_AMD74XX=m
# CONFIG_BLK_DEV_CMD64X is not set
CONFIG_BLK_DEV_TRIFLEX=m
# CONFIG_BLK_DEV_CS5520 is not set
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT366=m
# CONFIG_BLK_DEV_JMICRON is not set
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT8172 is not set
CONFIG_BLK_DEV_IT8213=m
CONFIG_BLK_DEV_IT821X=m
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
CONFIG_BLK_DEV_TC86C001=m
CONFIG_BLK_DEV_CELLEB=m
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_HPTIOP=m
CONFIG_LIBFC=y
CONFIG_FCOE=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=y
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_GDTH=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_IBMVSCSI=y
CONFIG_SCSI_IBMVFC=m
CONFIG_SCSI_IBMVFC_TRACE=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_LPFC_DEBUG_FS=y
CONFIG_SCSI_DC395x=y
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_QLOGIC is not set
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_ATA=y
CONFIG_ATA_NONSTANDARD=y
# CONFIG_SATA_PMP is not set
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
CONFIG_SATA_ULI=m
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INIC162X=y
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=y
# CONFIG_PATA_HPT3X3_DMA is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=y
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MARVELL=y
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87410=y
CONFIG_PATA_NS87415=m
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RZ1000=y
CONFIG_PATA_SC1200=m
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=m
# CONFIG_PATA_VIA is not set
CONFIG_PATA_WINBOND=m
CONFIG_PATA_PLATFORM=m
# CONFIG_PATA_OF_PLATFORM is not set
CONFIG_PATA_SCC=m
CONFIG_PATA_SCH=m
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_MIRROR is not set
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
# CONFIG_FIREWIRE_SBP2 is not set
# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
# CONFIG_I2O_EXT_ADAPTEC_DMA64 is not set
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_LED=y
CONFIG_ADB_PMU_LED_IDE=y
CONFIG_PMAC_SMU=y
CONFIG_MAC_EMUMOUSEBTN=y
# CONFIG_THERM_PM72 is not set
CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM112=m
CONFIG_WINDFARM_PM121=y
CONFIG_PMAC_RACKMETER=m
# CONFIG_NETDEVICES is not set
CONFIG_IBM_NEW_EMAC_ZMII=y
CONFIG_IBM_NEW_EMAC_RGMII=y
CONFIG_IBM_NEW_EMAC_TAH=y
CONFIG_IBM_NEW_EMAC_EMAC4=y
# CONFIG_ISDN is not set
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_BCM5974=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=m
# CONFIG_JOYSTICK_IFORCE_USB is not set
# CONFIG_JOYSTICK_IFORCE_232 is not set
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=m
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=m
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_DB9=m
# CONFIG_JOYSTICK_GAMECON is not set
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
CONFIG_TABLET_USB_AIPTEK=y
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_DA9034=m
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
CONFIG_TOUCHSCREEN_INEXIO=m
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_ATI_REMOTE=m
# CONFIG_INPUT_ATI_REMOTE2 is not set
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=y
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF50633_PMU=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=m
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
# CONFIG_VT is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=y
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
CONFIG_MOXA_INTELLIO=y
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=m
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=y
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
CONFIG_SX=m
# CONFIG_RIO is not set
CONFIG_STALDRV=y
# CONFIG_STALLION is not set
CONFIG_ISTALLION=y
CONFIG_NOZOMI=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_PCI=m
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=y
CONFIG_SERIAL_PMACZILOG_TTYS=y
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_SERIAL_ICOM=m
CONFIG_SERIAL_TXX9=y
CONFIG_HAS_TXX9_SERIAL=y
CONFIG_SERIAL_TXX9_NR_UARTS=6
CONFIG_SERIAL_TXX9_CONSOLE=y
CONFIG_SERIAL_TXX9_STDSERIAL=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL=y
CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_CONSOLE=y
# CONFIG_HVC_ISERIES is not set
# CONFIG_HVC_RTAS is not set
CONFIG_HVC_BEAT=y
CONFIG_HVC_UDBG=y
# CONFIG_HVCS is not set
CONFIG_IBM_BSR=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_R3964=y
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set
#
# Mac SMBus host controller drivers
#
CONFIG_I2C_POWERMAC=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=y
CONFIG_I2C_OCORES=m
CONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=m
#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_STUB=m
#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=m
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO expanders:
#
CONFIG_GPIO_XILINX=y
#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=m
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_WM8350_POWER=m
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_DA9030=m
# CONFIG_CHARGER_PCF50633 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=m
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_HTC_PASIC3=y
CONFIG_TPS65010=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM8350=m
CONFIG_MFD_WM8350_I2C=m
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_WM8350 is not set
CONFIG_REGULATOR_DA903X=m
# CONFIG_REGULATOR_PCF50633 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_CUSTOMIZE=y
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
# CONFIG_MEDIA_TUNER_TEA5761 is not set
CONFIG_MEDIA_TUNER_TEA5767=y
# CONFIG_MEDIA_TUNER_MT20XX is not set
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2266=y
# CONFIG_MEDIA_TUNER_MT2131 is not set
# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_XC2028 is not set
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=y
# CONFIG_MEDIA_TUNER_MXL5007T is not set
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEO_BTCX=y
CONFIG_VIDEO_IR=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_VIDEO_TUNER=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
CONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=y
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9875=y
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_M52790=y
CONFIG_VIDEO_WM8775=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_CX25840=y
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
CONFIG_VIDEO_VIVI=y
CONFIG_VIDEO_BT848=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=y
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=y
CONFIG_VIDEO_SAA7134=y
# CONFIG_VIDEO_MXB is not set
CONFIG_VIDEO_HEXIUM_ORION=y
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_IVTV=y
# CONFIG_VIDEO_FB_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=y
CONFIG_USB_M5602=m
# CONFIG_USB_STV06XX is not set
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_OV519=y
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_PAC207=y
CONFIG_USB_GSPCA_PAC7311=m
# CONFIG_USB_GSPCA_SONIXB is not set
CONFIG_USB_GSPCA_SONIXJ=y
# CONFIG_USB_GSPCA_SPCA500 is not set
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
# CONFIG_USB_GSPCA_SPCA506 is not set
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=y
# CONFIG_USB_GSPCA_STK014 is not set
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=y
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
# CONFIG_USB_GSPCA_ZC3XX is not set
CONFIG_VIDEO_PVRUSB2=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=y
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=y
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=y
CONFIG_USB_KONICAWC=y
# CONFIG_USB_QUICKCAM_MESSENGER is not set
CONFIG_USB_ET61X251=m
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_OV511 is not set
CONFIG_USB_SE401=m
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
CONFIG_USB_ZC0301=y
CONFIG_USB_PWC=m
CONFIG_USB_PWC_DEBUG=y
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
CONFIG_USB_S2255=y
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DAB=y
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_UNINORTH=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=m
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=m
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
# CONFIG_FB_MATROX_MULTIHEAD is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
# CONFIG_FB_ATY128_BACKLIGHT is not set
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
CONFIG_FB_SAVAGE=m
# CONFIG_FB_SAVAGE_I2C is not set
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_TRIDENT_ACCEL=y
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_SM501=m
# CONFIG_FB_IBM_GXT4500 is not set
CONFIG_FB_PS3=y
CONFIG_FB_PS3_DEFAULT_SIZE_M=9
CONFIG_FB_VIRTUAL=m
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_DA903X=y
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=y
# CONFIG_USB_MOUSE is not set
#
# Special HID drivers
#
# CONFIG_HID_COMPAT is not set
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_EZKEY is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=m
# CONFIG_HID_SUNPLUS is not set
CONFIG_GREENASIA_FF=m
CONFIG_HID_TOPSEED=m
CONFIG_THRUSTMASTER_FF=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=y
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_CS is not set
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_PHIDGET=m
# CONFIG_USB_PHIDGETKIT is not set
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_ATM is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_IMX is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_FILE_STORAGE_TEST=y
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=m
# CONFIG_UWB_WLP is not set
CONFIG_UWB_I1480U=m
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_WM8350=m
# CONFIG_LEDS_DA903X is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_IDE_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_V3020=m
# CONFIG_RTC_DRV_WM8350 is not set
CONFIG_RTC_DRV_PCF50633=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PPC=m
# CONFIG_DMADEVICES is not set
CONFIG_AUXDISPLAY=y
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_SMX=m
# CONFIG_UIO_SERCOS3 is not set
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_ME4000=y
CONFIG_MEILHAUS=m
# CONFIG_ME0600 is not set
CONFIG_ME0900=m
CONFIG_ME1000=m
CONFIG_ME1400=m
CONFIG_ME1600=m
CONFIG_ME4600=m
CONFIG_ME6000=m
# CONFIG_ME8100 is not set
CONFIG_ME8200=m
CONFIG_MEDUMMY=m
# CONFIG_USB_IP_COMMON is not set
# CONFIG_ECHO is not set
CONFIG_POCH=m
CONFIG_COMEDI=m
# CONFIG_COMEDI_PCI_DRIVERS is not set
CONFIG_COMEDI_USB_DRIVERS=m
CONFIG_ASUS_OLED=m
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
CONFIG_ALTERA_PCIE_CHDMA=m
# CONFIG_RTL8187SE is not set
CONFIG_INPUT_MIMIO=m
# CONFIG_TRANZPORT is not set
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_ANDROID_BINDER_IPC=y
# CONFIG_ANDROID_LOGGER is not set
# CONFIG_ANDROID_RAM_CONSOLE is not set
CONFIG_ANDROID_TIMED_GPIO=m
CONFIG_ANDROID_LOW_MEMORY_KILLER=y
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=m
# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
# CONFIG_OCFS2_FS_POSIX_ACL is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=y
CONFIG_HFS_FS=m
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=y
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=y
CONFIG_ROMFS_FS=y
CONFIG_SYSV_FS=m
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
#
# Tracers
#
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
CONFIG_DYNAMIC_PRINTK_DEBUG=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_HCALL_STATS=y
CONFIG_IRQSTACKS=y
CONFIG_VIRQ_DEBUG=y
# CONFIG_BOOTX_TEXT is not set
CONFIG_PPC_EARLY_DEBUG=y
CONFIG_PPC_EARLY_DEBUG_LPAR=y
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_KEYS_COMPAT=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
^ permalink raw reply
* Re: [PATCH] powerpc/cell: fix dependency in cpufreq
From: Michael Neuling @ 2009-02-10 1:48 UTC (permalink / raw)
To: michael; +Cc: linuxppc-dev, Arnd Bergmann
In-Reply-To: <1234227692.8149.58.camel@localhost>
> > cbe_cpufreq.c uses cbe_cpufreq_has_pmi which is provided by
> > cbe_cpufreq_pmi.c. Hence CBE_CPUFREQ depends on CBE_CPUFREQ_PMI.
> >=20
> > Signed-off-by: Michael Neuling <mikey@neuling.org>
> > ---
> > I'm not 100% sure is this the right fix. Should CBE_CPUFREQ really
> > depend on CBE_CPUFREQ_PMI?
>
> No I don't think it is. Look at platforms/cell/cbe_cpufreq.h, the
> intention seems to be that if PMI isn't built in then that variable is
> hardcoded to 0 and we never use the pmi routines.
---
#if defined(CONFIG_CBE_CPUFREQ_PMI) || defined(CONFIG_CBE_CPUFREQ_PMI_MODULE)
extern bool cbe_cpufreq_has_pmi;
#else
#define cbe_cpufreq_has_pmi (0)
#endif
--
So, I think this is bust. If cpufreq_pmi is in a module, how does
cpufreq use cbe_cpufreq_has_pmi if the module is not inserted?
Arnd?
Mikey
^ permalink raw reply
* Re: [PATCH] powerpc/cell: fix dependency in cpufreq
From: Michael Ellerman @ 2009-02-10 1:01 UTC (permalink / raw)
To: Michael Neuling; +Cc: linuxppc-dev, Arnd Bergmann
In-Reply-To: <18282.1234226812@neuling.org>
[-- Attachment #1: Type: text/plain, Size: 810 bytes --]
On Tue, 2009-02-10 at 11:46 +1100, Michael Neuling wrote:
> cbe_cpufreq.c uses cbe_cpufreq_has_pmi which is provided by
> cbe_cpufreq_pmi.c. Hence CBE_CPUFREQ depends on CBE_CPUFREQ_PMI.
>
> Signed-off-by: Michael Neuling <mikey@neuling.org>
> ---
> I'm not 100% sure is this the right fix. Should CBE_CPUFREQ really
> depend on CBE_CPUFREQ_PMI?
No I don't think it is. Look at platforms/cell/cbe_cpufreq.h, the
intention seems to be that if PMI isn't built in then that variable is
hardcoded to 0 and we never use the pmi routines.
cheers
--
Michael Ellerman
OzLabs, IBM Australia Development Lab
wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)
We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* [PATCH] powerpc/cell: fix dependency in cpufreq
From: Michael Neuling @ 2009-02-10 0:46 UTC (permalink / raw)
To: Arnd Bergmann; +Cc: linuxppc-dev
cbe_cpufreq.c uses cbe_cpufreq_has_pmi which is provided by
cbe_cpufreq_pmi.c. Hence CBE_CPUFREQ depends on CBE_CPUFREQ_PMI.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
I'm not 100% sure is this the right fix. Should CBE_CPUFREQ really
depend on CBE_CPUFREQ_PMI?
arch/powerpc/platforms/cell/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Index: linux-2.6-ozlabs/arch/powerpc/platforms/cell/Kconfig
===================================================================
--- linux-2.6-ozlabs.orig/arch/powerpc/platforms/cell/Kconfig
+++ linux-2.6-ozlabs/arch/powerpc/platforms/cell/Kconfig
@@ -111,7 +111,7 @@ config CBE_THERM
config CBE_CPUFREQ
tristate "CBE frequency scaling"
- depends on CBE_RAS && CPU_FREQ
+ depends on CBE_RAS && CPU_FREQ && CBE_CPUFREQ_PMI
default m
help
This adds the cpufreq driver for Cell BE processors.
@@ -120,7 +120,7 @@ config CBE_CPUFREQ
config CBE_CPUFREQ_PMI
tristate "CBE frequency scaling using PMI interface"
- depends on CBE_CPUFREQ && PPC_PMI && EXPERIMENTAL
+ depends on PPC_PMI && EXPERIMENTAL
default n
help
Select this, if you want to use the PMI interface
^ permalink raw reply
* Re: [PATCH] powerpc/cell: add missing #include for oprofile
From: Arnd Bergmann @ 2009-02-09 22:44 UTC (permalink / raw)
To: Michael Neuling; +Cc: linuxppc-dev, Carl Love
In-Reply-To: <26307.1234134254@neuling.org>
On Monday 09 February 2009, Michael Neuling wrote:
> arch/powerpc/oprofile/cell/spu_profiler.c is missing a asm/time.h
> include which is required for ppc_proc_freq. This can cause compile
> failures for some config combinations.
>
> Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
^ permalink raw reply
* Re: [PATCH] ftrace, powerpc64: fix math to calculate offset in TOC
From: Benjamin Herrenschmidt @ 2009-02-09 22:21 UTC (permalink / raw)
To: Ingo Molnar
Cc: Arnd Bergmann, LKML, Steven Rostedt, linuxppc-dev, Paul Mackerras,
Remis Lima Baima
In-Reply-To: <20090209094014.GE7930@elte.hu>
On Mon, 2009-02-09 at 10:40 +0100, Ingo Molnar wrote:
> * Steven Rostedt <rostedt@goodmis.org> wrote:
>
> >
> > Paul,
> >
> > I found the bug that was causing large modules to fail in setting
> > up dynamic ftrace. It wound up being a simple math error. To calculate
> > the offset in the TOC, I had used an OR, but the bottom half was
> > a signed extended short, and it should have been an addition.
> > The fix is in my tree below, as well as posted here.
>
> Looks like a .29 candidate?
Yup, I was planning to send it to Linus along with a handful of other
powerpc fixes today, unless you prefer taking it yourself.
Cheers,
Ben.
^ permalink raw reply
* Re: [PATCH 1/1] edac: new ppc4xx driver module
From: Andrew Morton @ 2009-02-09 21:12 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev, gerickson, dougthompson
In-Reply-To: <20090209210119.GF2297@yoda.jdub.homelinux.org>
On Mon, 9 Feb 2009 16:01:19 -0500
Josh Boyer <jwboyer@linux.vnet.ibm.com> wrote:
> On Fri, Feb 06, 2009 at 11:49:47AM -0800, Andrew Morton wrote:
> >On Fri, 06 Feb 2009 11:40:41 -0800
> >Grant Erickson <gerickson@nuovations.com> wrote:
> >
> >> On 1/30/09 2:05 PM, Andrew Morton wrote:
> >> > On Fri, 30 Jan 2009 09:54:42 -0700 dougthompson@xmission.com wrote:
> >> >> From: Grant Erickson <gerickson@nuovations.com>
> >> >
> >> > Perhaps a powerpc mailing list should have been cc'ed?
> >>
> >> The first round patch went to Doug, the BlueSmoke (EDAC) mailing list and
> >> the Linux/PowerPC mailing list. However, because the original patch was
> >> split in two, subsequent revisions of just the EDAC piece went to Doug and
> >> BlueSmoke. Doug then forwarded it to linux-kernel.
> >>
> >> What's the preferred sign-off, ACK chain for this subsystem? Through
> >> PowerPC/4xx or PowerPC GIT upstream or through you and -mm upstream?
> >
> >I don't trust those guys ;)
>
> I might take offense to that, but it seems that there aren't too many people
> in general that you trust, so I guess that's fine. ;)
>
> (And while you may or may not be joking, if there's something that I've done
> to be considered not trustworthy then please let me know.)
Every kernel cycle there are literally hundreds of patches which slip
through subsystem tree maintainers' fingers. Patches which I unlose
for them. Heaven knows how many patches get lost on mailing lists
which I don't read.
My mistrust is widespread and well-placed ;)
> >I'd merge it via -mm, while cc'ing various random powerpc personalities.
>
> Erm, ok. Since there doesn't appear to be an EDAC git tree for -next I
> guess that makes sense. I'll try to review the most recent version in the
> next few days.
Thanks.
^ permalink raw reply
* Re: [PATCH 1/1] edac: new ppc4xx driver module
From: Josh Boyer @ 2009-02-09 21:01 UTC (permalink / raw)
To: Andrew Morton; +Cc: linuxppc-dev, Grant Erickson, dougthompson
In-Reply-To: <20090206114947.ea86ee58.akpm@linux-foundation.org>
On Fri, Feb 06, 2009 at 11:49:47AM -0800, Andrew Morton wrote:
>On Fri, 06 Feb 2009 11:40:41 -0800
>Grant Erickson <gerickson@nuovations.com> wrote:
>
>> On 1/30/09 2:05 PM, Andrew Morton wrote:
>> > On Fri, 30 Jan 2009 09:54:42 -0700 dougthompson@xmission.com wrote:
>> >> From: Grant Erickson <gerickson@nuovations.com>
>> >
>> > Perhaps a powerpc mailing list should have been cc'ed?
>>
>> The first round patch went to Doug, the BlueSmoke (EDAC) mailing list and
>> the Linux/PowerPC mailing list. However, because the original patch was
>> split in two, subsequent revisions of just the EDAC piece went to Doug and
>> BlueSmoke. Doug then forwarded it to linux-kernel.
>>
>> What's the preferred sign-off, ACK chain for this subsystem? Through
>> PowerPC/4xx or PowerPC GIT upstream or through you and -mm upstream?
>
>I don't trust those guys ;)
I might take offense to that, but it seems that there aren't too many people
in general that you trust, so I guess that's fine. ;)
(And while you may or may not be joking, if there's something that I've done
to be considered not trustworthy then please let me know.)
>I'd merge it via -mm, while cc'ing various random powerpc personalities.
Erm, ok. Since there doesn't appear to be an EDAC git tree for -next I
guess that makes sense. I'll try to review the most recent version in the
next few days.
josh
^ permalink raw reply
* Re: [PATCH] ftrace, powerpc64: fix math to calculate offset in TOC
From: Geoff Levand @ 2009-02-09 20:16 UTC (permalink / raw)
To: Steven Rostedt
Cc: Arnd Bergmann, LKML, linuxppc-dev, Paul Mackerras,
Remis Lima Baima, Ingo Molnar
In-Reply-To: <alpine.DEB.1.10.0902080118480.30802@gandalf.stny.rr.com>
Steven Rostedt wrote:
> I found the bug that was causing large modules to fail in setting
> up dynamic ftrace. It wound up being a simple math error. To calculate
> the offset in the TOC, I had used an OR, but the bottom half was
> a signed extended short, and it should have been an addition.
> The fix is in my tree below, as well as posted here.
> ----
> arch/powerpc/kernel/ftrace.c | 5 +++--
> 1 files changed, 3 insertions(+), 2 deletions(-)
I tested this on PS3 with CONFIG_FTRACE_SELFTEST=y and
CONFIG_FTRACE_SELFTEST=y, and all modules now load and
the system seems to work properly. I did not run any
tracer specific tests though.
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
^ permalink raw reply
* Re: [PATCH 2/2] powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boards
From: Kumar Gala @ 2009-02-09 15:32 UTC (permalink / raw)
To: Li Yang; +Cc: linuxppc-dev
In-Reply-To: <2a27d3730902082347n7f0eb48dq8c4ecccda290f9c8@mail.gmail.com>
On Feb 9, 2009, at 1:47 AM, Li Yang wrote:
>
> It's a complex case for RDB boards. The revision A and revision B
> boards DO always connect TSEC0 to Vitesse switch. While the latest
> revision C board has one setting to connect TSEC0 to a Marvell PHY and
> MDIO bus. In BSP we have several DTS's for each setting of the board,
> shouldn't we do the same for upstream?
Is this something we can detect and deal with in u-boot? If not than
having multiple .dts for the revisions seems like the only solution.
- k
^ permalink raw reply
* Re: [PATCH] ftrace, powerpc64: fix math to calculate offset in TOC
From: Ingo Molnar @ 2009-02-09 15:24 UTC (permalink / raw)
To: Steven Rostedt
Cc: Arnd Bergmann, LKML, linuxppc-dev, Paul Mackerras,
Remis Lima Baima
In-Reply-To: <alpine.DEB.1.10.0902091000400.14528@gandalf.stny.rr.com>
* Steven Rostedt <rostedt@goodmis.org> wrote:
>
> On Mon, 9 Feb 2009, Ingo Molnar wrote:
>
> >
> > * Steven Rostedt <rostedt@goodmis.org> wrote:
> >
> > >
> > > Paul,
> > >
> > > I found the bug that was causing large modules to fail in setting
> > > up dynamic ftrace. It wound up being a simple math error. To calculate
> > > the offset in the TOC, I had used an OR, but the bottom half was
> > > a signed extended short, and it should have been an addition.
> > > The fix is in my tree below, as well as posted here.
> >
> > Looks like a .29 candidate?
>
> Ingo,
>
> I think Ben pulled them into their tree. The changes are specific to ppc,
> and will probably get better user testing there. Unless you feel that we
> have a bit of ppc testers using tip.
no, that's fine - just wanted to make sure it goes upstream via some method.
Ingo
^ permalink raw reply
* Re: [PATCH] ftrace, powerpc64: fix math to calculate offset in TOC
From: Steven Rostedt @ 2009-02-09 15:02 UTC (permalink / raw)
To: Ingo Molnar
Cc: Arnd Bergmann, LKML, linuxppc-dev, Paul Mackerras,
Remis Lima Baima
In-Reply-To: <20090209094014.GE7930@elte.hu>
On Mon, 9 Feb 2009, Ingo Molnar wrote:
>
> * Steven Rostedt <rostedt@goodmis.org> wrote:
>
> >
> > Paul,
> >
> > I found the bug that was causing large modules to fail in setting
> > up dynamic ftrace. It wound up being a simple math error. To calculate
> > the offset in the TOC, I had used an OR, but the bottom half was
> > a signed extended short, and it should have been an addition.
> > The fix is in my tree below, as well as posted here.
>
> Looks like a .29 candidate?
Ingo,
I think Ben pulled them into their tree. The changes are specific to ppc,
and will probably get better user testing there. Unless you feel that we
have a bit of ppc testers using tip.
-- Steve
^ permalink raw reply
* Re: [PATCH] ftrace, powerpc64: fix math to calculate offset in TOC
From: Remis Lima Baima @ 2009-02-09 13:08 UTC (permalink / raw)
To: Ingo Molnar
Cc: Arnd Bergmann, LKML, Steven Rostedt, linuxppc-dev, Paul Mackerras
In-Reply-To: <20090209094014.GE7930@elte.hu>
I have just tried the patch here and everything worked great!
Very well done.
On Mon, Feb 9, 2009 at 10:40 AM, Ingo Molnar <mingo@elte.hu> wrote:
>
> * Steven Rostedt <rostedt@goodmis.org> wrote:
>
>>
>> Paul,
>>
>> I found the bug that was causing large modules to fail in setting
>> up dynamic ftrace. It wound up being a simple math error. To calculate
>> the offset in the TOC, I had used an OR, but the bottom half was
>> a signed extended short, and it should have been an addition.
>> The fix is in my tree below, as well as posted here.
>
> Looks like a .29 candidate?
>
> Ingo
I agree. A functional ("out-of-the-box") dynamic-ftrace helps quite a lot ;-)
Regards,
Remis
^ permalink raw reply
* Re: Badness at kernel/time/timekeeping.c:98 in pmud (timekeeping_suspended)
From: Thomas Gleixner @ 2009-02-09 12:03 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linuxppc-dev, Ingo Molnar, Paul Collins, linux-kernel
In-Reply-To: <200902081439.31548.rjw@sisk.pl>
On Sun, 8 Feb 2009, Rafael J. Wysocki wrote:
> On Sunday 08 February 2009, Paul Collins wrote:
> > Paul Collins <paul@burly.ondioline.org> writes:
> >
> > > "Rafael J. Wysocki" <rjw@sisk.pl> writes:
> > >
> > >> On Wednesday 21 January 2009, Paul Collins wrote:
> > >>> Got a couple of these on a PowerBook running 2.6.29-rc2 either during
> > >>> suspend or resume -- it's hard to tell. (The suspend message is
> > >>> timestamped in syslog with the time I resumed, so I guess it was
> > >>> buffered along with the subsequent "Badness" messages.)
> > >>
> > >> Please check if the patch from http://lkml.org/lkml/2009/1/13/144 fixes the
> > >> problem for you.
> > >
> > > It does not fix the problem.
> >
> > I'm also getting this warning since 2.6.28.1, which incorporated commit
> > 1c5745aa380efb6417b5681104b007c8612fb496 ("sched_clock: prevent
> > scd->clock from moving backwards, take #2") as commit
> > e268dcdd404f4558cdd24c8ecede3e064df8fa33, this being the patch that
> > introduced the WARN_ON(timekeeping_suspended) check.
>
> Hm, I thought the timekeeping suspend problem was fixed in this commit. Ingo?
The commit fixed the problem with sched_clock, but it does not fix
problems where other parts of the kernel call timekeeping functions
_AFTER_ timekeeping has been suspended.
Thanks,
tglx
^ permalink raw reply
* Re: [PATCH] ftrace, powerpc64: fix math to calculate offset in TOC
From: Ingo Molnar @ 2009-02-09 9:40 UTC (permalink / raw)
To: Steven Rostedt
Cc: Arnd Bergmann, LKML, linuxppc-dev, Paul Mackerras,
Remis Lima Baima
In-Reply-To: <alpine.DEB.1.10.0902080118480.30802@gandalf.stny.rr.com>
* Steven Rostedt <rostedt@goodmis.org> wrote:
>
> Paul,
>
> I found the bug that was causing large modules to fail in setting
> up dynamic ftrace. It wound up being a simple math error. To calculate
> the offset in the TOC, I had used an OR, but the bottom half was
> a signed extended short, and it should have been an addition.
> The fix is in my tree below, as well as posted here.
Looks like a .29 candidate?
Ingo
^ permalink raw reply
* [PATCH] Defconfig for mpc5200 updates.
From: Grzegorz Bernacki @ 2009-02-09 8:33 UTC (permalink / raw)
To: linuxppc-dev
Add support for:
- LXT phy
- AT24 eeprom
- RTC (DS1337)
- MTD partitioning based on OF description
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
---
arch/powerpc/configs/mpc5200_defconfig | 72 ++++++++++++++++++++++++++++----
1 files changed, 64 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 81afc8b..8afcaac 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:40:44 2009
+# Linux kernel version: 2.6.29-rc3
+# Fri Feb 6 09:48:53 2009
#
# CONFIG_PPC64 is not set
@@ -166,6 +166,7 @@ CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_EFIKA=y
CONFIG_PPC_LITE5200=y
+# CONFIG_PPC_MEDIA5200 is not set
CONFIG_PPC_MPC5200_BUGFIX=y
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
@@ -388,7 +389,10 @@ CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
@@ -502,7 +506,7 @@ CONFIG_MISC_DEVICES=y
#
# EEPROM support
#
-# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
@@ -678,7 +682,7 @@ CONFIG_PHYLIB=y
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
+CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
@@ -815,8 +819,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -1281,7 +1283,61 @@ CONFIG_NEW_LEDS=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
--
1.6.0.6
^ permalink raw reply related
* Re: [PATCH 2/2] powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boards
From: Li Yang @ 2009-02-09 7:47 UTC (permalink / raw)
To: Anton Vorontsov; +Cc: linuxppc-dev
In-Reply-To: <20090205201040.GB3425@oksana.dev.rtsoft.ru>
On Fri, Feb 6, 2009 at 4:10 AM, Anton Vorontsov
<avorontsov@ru.mvista.com> wrote:
> TSEC0 is connected to Vitesse 7385 5-port switch. The switch
> isn't connected to any mdio bus, the link to the switch is fixed
> to Full-duplex 1000 Mb/s (no pause).
It's a complex case for RDB boards. The revision A and revision B
boards DO always connect TSEC0 to Vitesse switch. While the latest
revision C board has one setting to connect TSEC0 to a Marvell PHY and
MDIO bus. In BSP we have several DTS's for each setting of the board,
shouldn't we do the same for upstream?
- Leo
^ permalink raw reply
* Re: 2.6.29-rc4-git1 build break : cell/spu_profiler.o
From: Sachin P. Sant @ 2009-02-09 7:19 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: Mel Gorman, linuxppc-dev, arnd, Kamalesh Babulal
In-Reply-To: <20090209175043.04889757.sfr@canb.auug.org.au>
Stephen Rothwell wrote:
> See http://patchwork.ozlabs.org/patch/22628/
Thanks Stephen. The above patch fixed this build break.
Regards
-Sachin
--
---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------
^ permalink raw reply
* Re: 2.6.29-rc4-git1 build break : cell/spu_profiler.o
From: Stephen Rothwell @ 2009-02-09 6:50 UTC (permalink / raw)
To: Sachin P. Sant; +Cc: Mel Gorman, linuxppc-dev, arnd, Kamalesh Babulal
In-Reply-To: <498FD09D.2070207@in.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 930 bytes --]
Hi Sachin,
On Mon, 09 Feb 2009 12:13:41 +0530 "Sachin P. Sant" <sachinp@in.ibm.com> wrote:
>
> 2.6.29-rc4-git1 randconfig build on powerpc fails with
>
> CALL arch/powerpc/kernel/prom_init_check.sh
> CC [M] arch/powerpc/oprofile/cell/spu_profiler.o
> arch/powerpc/oprofile/cell/spu_profiler.c: In function set_spu_profiling_frequency:
> arch/powerpc/oprofile/cell/spu_profiler.c:52: error: ppc_proc_freq undeclared (first use in this function)
> arch/powerpc/oprofile/cell/spu_profiler.c:52: error: (Each undeclared identifier is reported only once
> arch/powerpc/oprofile/cell/spu_profiler.c:52: error: for each function it appears in.)
> make[1]: *** [arch/powerpc/oprofile/cell/spu_profiler.o] Error 1
> make: *** [arch/powerpc/oprofile] Error 2
See http://patchwork.ozlabs.org/patch/22628/
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* 2.6.29-rc4-git1 build break : cell/spu_profiler.o
From: Sachin P. Sant @ 2009-02-09 6:43 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Mel Gorman, arnd, Kamalesh Babulal
[-- Attachment #1: Type: text/plain, Size: 846 bytes --]
2.6.29-rc4-git1 randconfig build on powerpc fails with
CALL arch/powerpc/kernel/prom_init_check.sh
CC [M] arch/powerpc/oprofile/cell/spu_profiler.o
arch/powerpc/oprofile/cell/spu_profiler.c: In function set_spu_profiling_frequency:
arch/powerpc/oprofile/cell/spu_profiler.c:52: error: ppc_proc_freq undeclared (first use in this function)
arch/powerpc/oprofile/cell/spu_profiler.c:52: error: (Each undeclared identifier is reported only once
arch/powerpc/oprofile/cell/spu_profiler.c:52: error: for each function it appears in.)
make[1]: *** [arch/powerpc/oprofile/cell/spu_profiler.o] Error 1
make: *** [arch/powerpc/oprofile] Error 2
.config attached.
Thanks
-Sachin
--
---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------
[-- Attachment #2: config_rc4-git1-cell-failure --]
[-- Type: text/plain, Size: 38949 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc4-git1
# Mon Feb 9 13:45:17 2009
#
CONFIG_PPC64=y
#
# Processor support
#
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
CONFIG_TUNE_CELL=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
# CONFIG_VIRT_CPU_ACCOUNTING is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
CONFIG_PPC_DCR_MMIO=y
CONFIG_PPC_DCR=y
CONFIG_PPC_OF_PLATFORM_PCI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_MM_OWNER=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_FREEZER is not set
CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_PSERIES is not set
CONFIG_LPARCFG=y
CONFIG_PPC_ISERIES=y
#
# iSeries device drivers
#
CONFIG_VIODASD=m
# CONFIG_VIOCD is not set
CONFIG_VIOTAPE=m
CONFIG_VIOPATH=y
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_MAPLE=y
CONFIG_PPC_PASEMI=y
#
# PA Semi PWRficient options
#
CONFIG_PPC_PASEMI_IOMMU=y
CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE=y
CONFIG_PPC_PS3=y
#
# PS3 Platform Options
#
# CONFIG_PS3_ADVANCED is not set
CONFIG_PS3_HTAB_SIZE=20
CONFIG_PS3_VUART=y
CONFIG_PS3_PS3AV=y
CONFIG_PS3_SYS_MANAGER=y
CONFIG_PS3_STORAGE=m
# CONFIG_PS3_DISK is not set
CONFIG_PS3_FLASH=m
CONFIG_PS3_LPM=y
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_COMMON=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
CONFIG_PPC_CELLEB=y
# CONFIG_PPC_CELL_QPACE is not set
#
# Cell Broadband Engine options
#
CONFIG_SPU_FS=m
# CONFIG_SPU_FS_64K_LS is not set
CONFIG_SPU_TRACE=m
CONFIG_SPU_BASE=y
CONFIG_CBE_RAS=y
CONFIG_PPC_IBM_CELL_RESETBUTTON=y
CONFIG_CBE_THERM=m
CONFIG_CBE_CPUFREQ=m
CONFIG_CBE_CPUFREQ_SPU_GOVERNOR=m
CONFIG_OPROFILE_CELL=y
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_UDBG_BEAT=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
CONFIG_U3_DART=y
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
CONFIG_PPC_PMI=y
CONFIG_MMIO_NVRAM=y
CONFIG_MPIC_U3_HT_IRQS=y
CONFIG_MPIC_BROKEN_REGREAD=y
CONFIG_IBMVIO=y
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
CONFIG_PPC_INDIRECT_IO=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPU Frequency drivers
#
CONFIG_PPC_PASEMI_CPUFREQ=y
# CONFIG_AXON_RAM is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTREMOVE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_HAS_HASH_64K is not set
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_VERBOSE=y
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_STUB is not set
CONFIG_PCCARD=m
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=m
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_ELECTRA_CF=m
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_RELOCATABLE=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_NET_KEY=m
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
CONFIG_ATM=m
# CONFIG_ATM_LANE is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
# CONFIG_NET_SCH_HTB is not set
CONFIG_NET_SCH_HFSC=y
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
# CONFIG_NET_SCH_TBF is not set
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
# CONFIG_NET_CLS_RSVP is not set
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
# CONFIG_GACT_PROB is not set
CONFIG_NET_ACT_MIRRED=y
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
CONFIG_IRDA=y
#
# IrDA protocols
#
CONFIG_IRLAN=y
CONFIG_IRNET=m
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
# CONFIG_DONGLE is not set
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_NSC_FIR=y
CONFIG_WINBOND_FIR=y
# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
CONFIG_PHONET=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_CFG80211_REG_DEBUG=y
# CONFIG_NL80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_MAC80211 is not set
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_LEDS=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_SPI=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_PHANTOM=m
CONFIG_SGI_IOC4=m
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_HP_ILO=m
#
# EEPROM support
#
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_TIMINGS=y
CONFIG_BLK_DEV_IDE_SATA=y
# CONFIG_IDE_GD is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_DELKIN=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_PLATFORM=m
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_JMICRON=y
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IT8172=m
CONFIG_BLK_DEV_IT8213=y
CONFIG_BLK_DEV_IT821X=y
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
CONFIG_BLK_DEV_TC86C001=m
# CONFIG_BLK_DEV_CELLEB is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# A new alternative FireWire stack is available with EXPERIMENTAL=y
#
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
#
# PCILynx controller requires I2C
#
#
# SBP-2 support (for storage devices) requires SCSI
#
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_VIDEO1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
# CONFIG_I2O_PROC is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
# CONFIG_DUMMY is not set
CONFIG_EQUALIZER=y
CONFIG_TUN=y
# CONFIG_VETH is not set
CONFIG_ARCNET=m
# CONFIG_ARCNET_1201 is not set
# CONFIG_ARCNET_1051 is not set
CONFIG_ARCNET_RAW=m
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=m
# CONFIG_ARCNET_COM90xxIO is not set
# CONFIG_ARCNET_RIM_I is not set
# CONFIG_ARCNET_COM20020 is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=y
CONFIG_IBM_NEW_EMAC_ZMII=y
CONFIG_IBM_NEW_EMAC_RGMII=y
CONFIG_IBM_NEW_EMAC_TAH=y
CONFIG_IBM_NEW_EMAC_EMAC4=y
# CONFIG_NETDEV_1000 is not set
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=y
# CONFIG_CHELSIO_T1_1G is not set
CONFIG_IXGB=m
CONFIG_S2IO=m
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
CONFIG_BNX2X=y
CONFIG_QLGE=y
CONFIG_TR=m
CONFIG_IBMOL=m
CONFIG_3C359=m
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_DEBUG=y
CONFIG_AIRO=m
CONFIG_HERMES=m
# CONFIG_HERMES_CACHE_FW_ON_INIT is not set
CONFIG_PLX_HERMES=m
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
# CONFIG_PCMCIA_SPECTRUM is not set
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y
CONFIG_PCMCIA_ATMEL=m
CONFIG_AIRO_CS=m
CONFIG_USB_ZD1201=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
# CONFIG_WIMAX_I2400M_USB is not set
CONFIG_WIMAX_I2400M_SDIO=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
#
# USB Network Adapters
#
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=m
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_HE is not set
CONFIG_ATM_SOLOS=m
# CONFIG_ISERIES_VETH is not set
CONFIG_FDDI=m
CONFIG_DEFXX=m
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
CONFIG_PPP=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOATM=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=m
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=m
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_MTOUCH=m
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_UINPUT=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_RAW=m
CONFIG_SERIO_XILINX_XPS_PS2=m
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=m
CONFIG_DIGIEPCA=y
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
# CONFIG_SYNCLINKMP is not set
CONFIG_SYNCLINK_GT=y
CONFIG_N_HDLC=y
CONFIG_RISCOM8=y
CONFIG_SPECIALIX=y
CONFIG_SX=m
CONFIG_RIO=y
CONFIG_RIO_OLDPCI=y
# CONFIG_STALDRV is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_ICOM is not set
CONFIG_SERIAL_TXX9=y
CONFIG_HAS_TXX9_SERIAL=y
CONFIG_SERIAL_TXX9_NR_UARTS=6
CONFIG_SERIAL_TXX9_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL=y
CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_ISERIES=y
CONFIG_HVC_RTAS=y
CONFIG_HVC_BEAT=y
CONFIG_VIRTIO_CONSOLE=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_PASEMI is not set
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_R3964=m
CONFIG_APPLICOM=y
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
#
# SPI Protocol Masters
#
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_BATTERY_DS2760=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_MAX1111=m
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=m
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_ALIM7101_WDT is not set
# CONFIG_WATCHDOG_RTAS is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L1=y
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_USB_DSBR=y
# CONFIG_USB_SI470X is not set
CONFIG_USB_MR800=y
CONFIG_DAB=y
CONFIG_USB_DABUSB=m
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_LTV350QV is not set
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
CONFIG_HID_PID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_CS is not set
CONFIG_USB_R8A66597_HCD=y
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# see USB_STORAGE Help for more information
#
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=m
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_FUNSOFT=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_GARMIN=y
# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_SERIAL_KLSI is not set
CONFIG_USB_SERIAL_KOBIL_SCT=m
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MOTOROLA is not set
CONFIG_USB_SERIAL_NAVMAN=y
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_SPCP8X5=y
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIEMENS_MPI=m
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
CONFIG_USB_BERRY_CHARGE=m
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_PHIDGET=y
CONFIG_USB_PHIDGETKIT=y
CONFIG_USB_PHIDGETMOTORCONTROL=m
# CONFIG_USB_PHIDGETSERVO is not set
CONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_VST=y
CONFIG_USB_ATM=m
# CONFIG_USB_SPEEDTOUCH is not set
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
# CONFIG_USB_XUSBATM is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_WBSD=m
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1390=m
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_RTC_DRV_DS3234=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PPC=m
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_UIO=y
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_SMX=y
CONFIG_UIO_SERCOS3=y
CONFIG_STAGING=y
CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4DEV_COMPAT=y
# CONFIG_EXT4_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_OCFS2_FS_POSIX_ACL=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_HFSPLUS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=y
CONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_EXPORTFS=m
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_RCU_CPU_STALL_DETECTOR=y
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
#
# Tracers
#
CONFIG_BUILD_DOCSRC=y
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_MARKERS is not set
CONFIG_SAMPLE_TRACEPOINTS=m
CONFIG_SAMPLE_KOBJECT=m
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_IRQSTACKS=y
# CONFIG_VIRQ_DEBUG is not set
CONFIG_BOOTX_TEXT=y
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL=y
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_ROOTPLUG=y
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_KEYS_COMPAT=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=m
# CONFIG_CRYPTO_SHA1 is not set
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
# CONFIG_PPC_CLOCK is not set
CONFIG_VIRTUALIZATION=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_BALLOON=y
^ permalink raw reply
* Re: [patch] powerpc/ps3: Use hard coded values for LV1 device type
From: James Bottomley @ 2009-02-09 3:59 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: linux-scsi, Mel Gorman, Kamalesh Babulal, linuxppc-dev,
Jens Axboe
In-Reply-To: <1234138267.31963.77.camel@pasglop>
On Mon, 2009-02-09 at 11:11 +1100, Benjamin Herrenschmidt wrote:
> On Sun, 2009-02-08 at 22:29 +1100, Michael Ellerman wrote:
> > On Fri, 2009-02-06 at 18:42 -0800, Geoff Levand wrote:
> > > Change the PS3 platform code to use hard coded numbers for its
> > > LV1 device types.
> > >
> > > The PS3 platform code was incorrectly using some scsi block
> > > constants for the device type returned from the LV1 hypervisor.
> > >
> > > Fixes build errors like these when CONFIG_BLOCK=n:
> > >
> > > In file included from include/scsi/scsi.h:12,
> > > from arch/powerpc/platforms/ps3/platform.h:25,
> > > from arch/powerpc/platforms/ps3/setup.c:36:
> > > include/scsi/scsi_cmnd.h:27:25: warning: "BLK_MAX_CDB" is not defined
> > > include/scsi/scsi_cmnd.h:28:3: error: #error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
>
> Adding Jens and James on CC since I think a proper fix lies in blkdev.h
> or scsi*.h
And cc'd linux-scsi
> So basically, the whole of blkdev.h is inside a big ifdef
> CONFIG_BLOCK... which means that scsi_cmnd.h can't build which in turn
> makes scsi.h fail.
Well, look at it from our point of view; it's impossible to build SCSI
without block, so a little interdependence is easy to get.
> The PS3 platform code wants to use some of the standard SCSI types from
> there though, as they are part of the hypervisor ABI. (And in fact it
> can be argued that non-block devices using SCSI do exist, such as
> scanners, no ?)
>
> Any reason other than pre-historical to have blkdev.h shielded like
> that ?
Actually, I think the fix lies in scsi.h ... we can make that into a
nicely independent protocol header file. Your current woes come because
it pulls in scsi_cmnd.h ... perhaps just getting rid of this will fix
it.
Can the rest of linux-scsi verify that the fix below doesn't break
something else?
I found one cockup: block/cmd-filter.c is apparently not including
linuc/blkdev.h directly but via scsi/scsi.h ... I fixed this up.
> Cheers,
> Ben.
>
> > > Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
> > > ---
> > > Ben,
> > >
> > > Please send upstream for 2.6.29.
> > >
> > > -Geoff
> > >
> > > arch/powerpc/platforms/ps3/platform.h | 8 +++-----
> > > 1 file changed, 3 insertions(+), 5 deletions(-)
> > >
> > > --- a/arch/powerpc/platforms/ps3/platform.h
> > > +++ b/arch/powerpc/platforms/ps3/platform.h
> > > @@ -22,8 +22,6 @@
> > > #define _PS3_PLATFORM_H
> > >
> > > #include <linux/rtc.h>
> > > -#include <scsi/scsi.h>
> > > -
> > > #include <asm/ps3.h>
> > >
> > > /* htab */
> > > @@ -83,12 +81,12 @@ enum ps3_bus_type {
> > > };
> > >
> > > enum ps3_dev_type {
> > > - PS3_DEV_TYPE_STOR_DISK = TYPE_DISK, /* 0 */
> > > + PS3_DEV_TYPE_STOR_DISK = 0, /* TYPE_DISK */
> > > PS3_DEV_TYPE_SB_GELIC = 3,
> > > PS3_DEV_TYPE_SB_USB = 4,
> > > - PS3_DEV_TYPE_STOR_ROM = TYPE_ROM, /* 5 */
> > > + PS3_DEV_TYPE_STOR_ROM = 5, /* TYPE_ROM */
> > > PS3_DEV_TYPE_SB_GPIO = 6,
> > > - PS3_DEV_TYPE_STOR_FLASH = TYPE_RBC, /* 14 */
> > > + PS3_DEV_TYPE_STOR_FLASH = 14, /* TYPE_RBC */
> >
> > This looks like you're just papering over the bug, by hardcoding the
> > same values that are in the scsi header. Or are they really independent,
> > in which case I'd say the comments are confusing.
> >
> > cheers
James
---
diff --git a/block/cmd-filter.c b/block/cmd-filter.c
index 504b275..572bbc2 100644
--- a/block/cmd-filter.c
+++ b/block/cmd-filter.c
@@ -22,6 +22,7 @@
#include <linux/spinlock.h>
#include <linux/capability.h>
#include <linux/bitops.h>
+#include <linux/blkdev.h>
#include <scsi/scsi.h>
#include <linux/cdrom.h>
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 80d7f60..084478e 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -9,7 +9,8 @@
#define _SCSI_SCSI_H
#include <linux/types.h>
-#include <scsi/scsi_cmnd.h>
+
+struct scsi_cmnd;
/*
* The maximum number of SG segments that we will put inside a
@@ -439,22 +440,6 @@ static inline int scsi_is_wlun(unsigned int lun)
#define host_byte(result) (((result) >> 16) & 0xff)
#define driver_byte(result) (((result) >> 24) & 0xff)
-static inline void set_msg_byte(struct scsi_cmnd *cmd, char status)
-{
- cmd->result |= status << 8;
-}
-
-static inline void set_host_byte(struct scsi_cmnd *cmd, char status)
-{
- cmd->result |= status << 16;
-}
-
-static inline void set_driver_byte(struct scsi_cmnd *cmd, char status)
-{
- cmd->result |= status << 24;
-}
-
-
#define sense_class(sense) (((sense) >> 4) & 0x7)
#define sense_error(sense) ((sense) & 0xf)
#define sense_valid(sense) ((sense) & 0x80);
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 855bf95..43b50d3 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -291,4 +291,19 @@ static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd)
#define scsi_for_each_prot_sg(cmd, sg, nseg, __i) \
for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i)
+static inline void set_msg_byte(struct scsi_cmnd *cmd, char status)
+{
+ cmd->result |= status << 8;
+}
+
+static inline void set_host_byte(struct scsi_cmnd *cmd, char status)
+{
+ cmd->result |= status << 16;
+}
+
+static inline void set_driver_byte(struct scsi_cmnd *cmd, char status)
+{
+ cmd->result |= status << 24;
+}
+
#endif /* _SCSI_SCSI_CMND_H */
^ permalink raw reply related
* [PATCH] powerpc: add missing sparsemem.h include
From: Michael Neuling @ 2009-02-09 0:49 UTC (permalink / raw)
To: benh; +Cc: linuxppc-dev
arch/powerpc/platforms/pseries/hotplug-memory.c uses
remove_section_mapping() but doesn't include sparsemem.h which defines
it. This can cause compilation fails for some configs.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
This is against mainline, so should be pushed up soon-ish...
arch/powerpc/platforms/pseries/hotplug-memory.c | 1 +
1 file changed, 1 insertion(+)
Index: linux-2.6-ozlabs/arch/powerpc/platforms/pseries/hotplug-memory.c
===================================================================
--- linux-2.6-ozlabs.orig/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ linux-2.6-ozlabs/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -14,6 +14,7 @@
#include <asm/firmware.h>
#include <asm/machdep.h>
#include <asm/pSeries_reconfig.h>
+#include <asm/sparsemem.h>
static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
{
^ permalink raw reply
* [PATCH] powerpc/pci: mmap anonymous memory when legacy_mem doesn't exist
From: Benjamin Herrenschmidt @ 2009-02-09 0:27 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Rafael J. Wysocki, hugh
The new legacy_mem file in sysfs is causing problems with X on machines
that don't support legacy memory access. The way I initially implemented
it, we would fail with -ENXIO when trying to mmap it, thus exposing to
X that we do support the API but there is no legacy memory.
Unfortunately, X poor error handling is causing it to fail to start when
it gets this error.
This implements a workaround hack that instead maps anonymous memory
instead (using shmem if VM_SHARED is set, just like /dev/zero does).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
This fixes a regression in .29 and is the less ugly way we found to
sort this problem out. I'll merge it ASAP so holler quick if you
have an objection
arch/powerpc/kernel/pci-common.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
--- linux-work.orig/arch/powerpc/kernel/pci-common.c 2009-02-06 16:23:36.000000000 +1100
+++ linux-work/arch/powerpc/kernel/pci-common.c 2009-02-06 16:30:32.000000000 +1100
@@ -561,8 +561,21 @@ int pci_mmap_legacy_page_range(struct pc
(unsigned long long)(offset + size - 1));
if (mmap_state == pci_mmap_mem) {
- if ((offset + size) > hose->isa_mem_size)
- return -ENXIO;
+ /* Hack alert !
+ *
+ * Because X is lame and can fail starting if it gets an error trying
+ * to mmap legacy_mem (instead of just moving on without legacy memory
+ * access) we fake it here by giving it anonymous memory, effectively
+ * behaving just like /dev/zero
+ */
+ if ((offset + size) > hose->isa_mem_size) {
+ printk(KERN_DEBUG
+ "Process %s (pid:%d) mapped non-existing PCI legacy memory for 0%04x:%02x\n",
+ current->comm, current->pid, pci_domain_nr(bus), bus->number);
+ if (vma->vm_flags & VM_SHARED)
+ return shmem_zero_setup(vma);
+ return 0;
+ }
offset += hose->isa_mem_phys;
} else {
unsigned long io_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
^ permalink raw reply
* Re: [patch] powerpc/ps3: Use hard coded values for LV1 device type
From: Benjamin Herrenschmidt @ 2009-02-09 0:11 UTC (permalink / raw)
To: michael
Cc: Mel Gorman, Kamalesh Babulal, James Bottomley, linuxppc-dev,
Jens Axboe
In-Reply-To: <1234092590.10240.4.camel@localhost>
On Sun, 2009-02-08 at 22:29 +1100, Michael Ellerman wrote:
> On Fri, 2009-02-06 at 18:42 -0800, Geoff Levand wrote:
> > Change the PS3 platform code to use hard coded numbers for its
> > LV1 device types.
> >
> > The PS3 platform code was incorrectly using some scsi block
> > constants for the device type returned from the LV1 hypervisor.
> >
> > Fixes build errors like these when CONFIG_BLOCK=n:
> >
> > In file included from include/scsi/scsi.h:12,
> > from arch/powerpc/platforms/ps3/platform.h:25,
> > from arch/powerpc/platforms/ps3/setup.c:36:
> > include/scsi/scsi_cmnd.h:27:25: warning: "BLK_MAX_CDB" is not defined
> > include/scsi/scsi_cmnd.h:28:3: error: #error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
Adding Jens and James on CC since I think a proper fix lies in blkdev.h
or scsi*.h
So basically, the whole of blkdev.h is inside a big ifdef
CONFIG_BLOCK... which means that scsi_cmnd.h can't build which in turn
makes scsi.h fail.
The PS3 platform code wants to use some of the standard SCSI types from
there though, as they are part of the hypervisor ABI. (And in fact it
can be argued that non-block devices using SCSI do exist, such as
scanners, no ?)
Any reason other than pre-historical to have blkdev.h shielded like
that ?
Cheers,
Ben.
> > Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
> > ---
> > Ben,
> >
> > Please send upstream for 2.6.29.
> >
> > -Geoff
> >
> > arch/powerpc/platforms/ps3/platform.h | 8 +++-----
> > 1 file changed, 3 insertions(+), 5 deletions(-)
> >
> > --- a/arch/powerpc/platforms/ps3/platform.h
> > +++ b/arch/powerpc/platforms/ps3/platform.h
> > @@ -22,8 +22,6 @@
> > #define _PS3_PLATFORM_H
> >
> > #include <linux/rtc.h>
> > -#include <scsi/scsi.h>
> > -
> > #include <asm/ps3.h>
> >
> > /* htab */
> > @@ -83,12 +81,12 @@ enum ps3_bus_type {
> > };
> >
> > enum ps3_dev_type {
> > - PS3_DEV_TYPE_STOR_DISK = TYPE_DISK, /* 0 */
> > + PS3_DEV_TYPE_STOR_DISK = 0, /* TYPE_DISK */
> > PS3_DEV_TYPE_SB_GELIC = 3,
> > PS3_DEV_TYPE_SB_USB = 4,
> > - PS3_DEV_TYPE_STOR_ROM = TYPE_ROM, /* 5 */
> > + PS3_DEV_TYPE_STOR_ROM = 5, /* TYPE_ROM */
> > PS3_DEV_TYPE_SB_GPIO = 6,
> > - PS3_DEV_TYPE_STOR_FLASH = TYPE_RBC, /* 14 */
> > + PS3_DEV_TYPE_STOR_FLASH = 14, /* TYPE_RBC */
>
> This looks like you're just papering over the bug, by hardcoding the
> same values that are in the scsi header. Or are they really independent,
> in which case I'd say the comments are confusing.
>
> cheers
>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox