From: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
To: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Cc: andersson@kernel.org, mathieu.poirier@linaro.org,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
rui.zhang@intel.com, lukasz.luba@arm.com, konradybcio@kernel.org,
mani@kernel.org, casey.connolly@linaro.org,
amit.kucheria@oss.qualcomm.com, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, manaf.pallikunhi@oss.qualcomm.com
Subject: Re: [PATCH v2 4/8] thermal: qcom: add qmi-cooling driver
Date: Mon, 16 Mar 2026 15:49:43 +0530 [thread overview]
Message-ID: <0f0ffa3e-36b0-4891-939c-8bfa89ec7e84@oss.qualcomm.com> (raw)
In-Reply-To: <aaqe4Crgjswl5f-s@mai.linaro.org>
On 3/6/2026 3:01 PM, Daniel Lezcano wrote:
> On Tue, Jan 27, 2026 at 09:27:18PM +0530, Gaurav Kohli wrote:
>> From: Casey Connolly <casey.connolly@linaro.org>
>>
>> The Thermal Mitigation Device (TMD) service exposes various platform
>> specific thermal mitigations available on remote subsystems (ie the
>> modem and cdsp). The service is exposed via the QMI messaging
>> interface, usually over the QRTR transport.
>>
>> Qualcomm QMI-based TMD cooling devices are used to mitigate thermal
>> conditions across multiple remote subsystems. These devices operate
>> based on junction temperature sensors (TSENS) associated with thermal
>> zones for each subsystem.
>
> IIUC, QMI is the messaging mechanism for remote proc. TMD is the cooling device.
>
> If it is correct, I suggest to follow the following organisation:
>
> - tmd_interface.c (qmi <-> tmd)
> - tmd_cooling.c (tmd <-> thermal framework)
>
> So we end up with:
>
> qmi_interface -> tmd_interface -> tmd_cooling
>
Thanks Daniel for review.
As discussed, I will make the changes as per the suggested partitions.
> AFAICT, it is similar with the pdr_interface, right ?
>
>> Co-developed-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
>> Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
>> Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
>> ---
>> drivers/soc/qcom/Kconfig | 13 +
>> drivers/soc/qcom/Makefile | 1 +
>> drivers/soc/qcom/qmi-cooling.c | 510 +++++++++++++++++++++++++++++++++
>> drivers/soc/qcom/qmi-cooling.h | 429 +++++++++++++++++++++++++++
>> 4 files changed, 953 insertions(+)
>> create mode 100644 drivers/soc/qcom/qmi-cooling.c
>> create mode 100644 drivers/soc/qcom/qmi-cooling.h
>>
>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>> index 2caadbbcf830..905a24b42fe6 100644
>> --- a/drivers/soc/qcom/Kconfig
>> +++ b/drivers/soc/qcom/Kconfig
>> @@ -124,6 +124,19 @@ config QCOM_PMIC_GLINK
>> Say yes here to support USB-C and battery status on modern Qualcomm
>> platforms.
>>
>> +config QCOM_QMI_COOLING
>> + tristate "Qualcomm QMI cooling drivers"
>> + depends on QCOM_RPROC_COMMON
>> + depends on ARCH_QCOM || COMPILE_TEST
>> + select QCOM_QMI_HELPERS
>> + help
>> + This enables the remote subsystem cooling devices. These cooling
>> + devices will be used by Qualcomm chipset to place various remote
>> + subsystem mitigations like remote processor passive mitigation,
>> + remote subsystem voltage restriction at low temperatures etc.
>> + The QMI cooling device will interface with remote subsystem
>> + using Qualcomm remoteproc interface.
>> +
>> config QCOM_QMI_HELPERS
>> tristate
>> depends on NET
>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>> index b7f1d2a57367..b6728f54944b 100644
>> --- a/drivers/soc/qcom/Makefile
>> +++ b/drivers/soc/qcom/Makefile
>> @@ -14,6 +14,7 @@ obj-$(CONFIG_QCOM_PMIC_GLINK) += pmic_glink.o
>> obj-$(CONFIG_QCOM_PMIC_GLINK) += pmic_glink_altmode.o
>> obj-$(CONFIG_QCOM_PMIC_PDCHARGER_ULOG) += pmic_pdcharger_ulog.o
>> CFLAGS_pmic_pdcharger_ulog.o := -I$(src)
>> +obj-$(CONFIG_QCOM_QMI_COOLING) += qmi-cooling.o
>> obj-$(CONFIG_QCOM_QMI_HELPERS) += qmi_helpers.o
>> qmi_helpers-y += qmi_encdec.o qmi_interface.o
>> obj-$(CONFIG_QCOM_RAMP_CTRL) += ramp_controller.o
>> diff --git a/drivers/soc/qcom/qmi-cooling.c b/drivers/soc/qcom/qmi-cooling.c
>> new file mode 100644
>> index 000000000000..463baa47c8b6
>> --- /dev/null
>> +++ b/drivers/soc/qcom/qmi-cooling.c
>> @@ -0,0 +1,510 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2017, The Linux Foundation
>> + * Copyright (c) 2025, Linaro Limited
>> + *
>> + * QMI Thermal Mitigation Device (TMD) client driver.
>> + * This driver provides an in-kernel client to handle hot and cold thermal
>> + * mitigations for remote subsystems (modem and DSPs) running the TMD service.
>> + * It doesn't implement any handling of reports from remote subsystems.
>> + */
>> +
>> +#include <linux/cleanup.h>
>> +#include <linux/err.h>
>> +#include <linux/module.h>
>> +#include <linux/net.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/remoteproc/qcom_rproc.h>
>> +#include <linux/remoteproc_cooling.h>
>> +#include <linux/slab.h>
>> +#include <linux/soc/qcom/qmi.h>
>> +#include <linux/thermal.h>
>> +
>> +#include "qmi-cooling.h"
>> +
>> +#define CDSP_INSTANCE_ID 0x43
>> +#define CDSP1_INSTANCE_ID 0x44
>> +
>> +#define QMI_TMD_RESP_TIMEOUT msecs_to_jiffies(100)
>> +
>> +/**
>> + * struct qmi_tmd_client - TMD client state
>> + * @dev: Device associated with this client
>> + * @name: Friendly name for the remote TMD service
>> + * @handle: QMI connection handle
>> + * @mutex: Lock to synchronise QMI communication
>> + * @id: The QMI TMD service instance ID
>> + * @cdev_list: The list of cooling devices (controls) enabled for this instance
>> + * @svc_arrive_work: Work item for initialising the client when the TMD service
>> + * starts.
>> + * @connection_active: Whether or not we're connected to the QMI TMD service
>> + */
>> +struct qmi_tmd_client {
>> + struct device *dev;
>> + const char *name;
>> + struct qmi_handle handle;
>> + struct mutex mutex;
>> + u32 id;
>> + struct list_head cdev_list;
>> + struct work_struct svc_arrive_work;
>> + bool connection_active;
>> +};
>> +
>> +/**
>> + * struct qmi_tmd - A TMD cooling device
>> + * @np: OF node associated with this control
>> + * @type: The control type (exposed via sysfs)
>> + * @qmi_name: The common name of this control shared by the remote subsystem
>> + * @rproc_cdev: Remote processor cooling device handle
>> + * @cur_state: The current cooling/warming/mitigation state
>> + * @max_state: The maximum state
>> + * @client: The TMD client instance this control is associated with
>> + */
>> +struct qmi_tmd {
>> + struct device_node *np;
>> + const char *type;
>> + char qmi_name[QMI_TMD_MITIGATION_DEV_ID_LENGTH_MAX_V01 + 1];
>> + struct list_head node;
>> + struct remoteproc_cdev *rproc_cdev;
>> + unsigned int cur_state;
>> + unsigned int max_state;
>> + struct qmi_tmd_client *client;
>> +};
>> +
>> +/**
>> + * struct qmi_instance_id - QMI instance match data
>> + * @id: The QMI instance ID
>> + * @name: Friendly name for this instance
>> + */
>> +struct qmi_instance_data {
>> + u32 id;
>> + const char *name;
>> +};
>> +
>> +/* Notify the remote subsystem of the requested cooling state */
>> +static int qmi_tmd_send_state_request(struct qmi_tmd *tmd)
>> +{
>> + struct tmd_set_mitigation_level_resp_msg_v01 tmd_resp = { 0 };
>> + struct tmd_set_mitigation_level_req_msg_v01 req = { 0 };
>> + struct qmi_tmd_client *client;
>> + struct qmi_txn txn;
>> + int ret = 0;
>> +
>> + client = tmd->client;
>> +
>> + guard(mutex)(&client->mutex);
>> +
>> + /*
>> + * This function is called by qmi_set_cur_state() which does not know if
>> + * the QMI service is actually online. If it isn't then we noop here.
>> + * The state is cached in tmd->cur_state and will be broadcast via
>> + * qmi_tmd_init_control() when the service comes up.
>> + */
>> + if (!client->connection_active)
>> + return 0;
>> +
>> + strscpy(req.mitigation_dev_id.mitigation_dev_id, tmd->qmi_name,
>> + QMI_TMD_MITIGATION_DEV_ID_LENGTH_MAX_V01 + 1);
>> + req.mitigation_level = tmd->cur_state;
>> +
>> + ret = qmi_txn_init(&client->handle, &txn,
>> + tmd_set_mitigation_level_resp_msg_v01_ei, &tmd_resp);
>> + if (ret < 0) {
>> + dev_err(client->dev, "qmi set state %d txn init failed for %s ret %d\n",
>> + tmd->cur_state, tmd->type, ret);
>> + return ret;
>> + }
>> +
>> + ret = qmi_send_request(&client->handle, NULL, &txn,
>> + QMI_TMD_SET_MITIGATION_LEVEL_REQ_V01,
>> + TMD_SET_MITIGATION_LEVEL_REQ_MSG_V01_MAX_MSG_LEN,
>> + tmd_set_mitigation_level_req_msg_v01_ei, &req);
>> + if (ret < 0) {
>> + dev_err(client->dev, "qmi set state %d txn send failed for %s ret %d\n",
>> + tmd->cur_state, tmd->type, ret);
>> + qmi_txn_cancel(&txn);
>> + return ret;
>> + }
>> +
>> + ret = qmi_txn_wait(&txn, QMI_TMD_RESP_TIMEOUT);
>> + if (ret < 0) {
>> + dev_err(client->dev, "qmi set state %d txn wait failed for %s ret %d\n",
>> + tmd->cur_state, tmd->type, ret);
>> + return ret;
>> + }
>> +
>> + if (tmd_resp.resp.result != QMI_RESULT_SUCCESS_V01) {
>> + ret = -tmd_resp.resp.result;
>> + dev_err(client->dev, "qmi set state %d NOT success for %s ret %d\n",
>> + tmd->cur_state, tmd->type, ret);
>> + return ret;
>> + }
>> +
>> + dev_dbg(client->dev, "Requested state %d/%d for %s\n", tmd->cur_state,
>> + tmd->max_state, tmd->type);
>> +
>> + return 0;
>> +}
>> +
>> +static int qmi_get_max_level(void *devdata, unsigned long *level)
>> +{
>> + struct qmi_tmd *tmd = devdata;
>> +
>> + if (!tmd)
>> + return -EINVAL;
>> +
>> + *level = tmd->max_state;
>> +
>> + return 0;
>> +}
>> +
>> +static int qmi_get_cur_level(void *devdata, unsigned long *level)
>> +{
>> + struct qmi_tmd *tmd = devdata;
>> +
>> + if (!tmd)
>> + return -EINVAL;
>> +
>> + *level = tmd->cur_state;
>> +
>> + return 0;
>> +}
>> +
>> +static int qmi_set_cur_level(void *devdata, unsigned long level)
>> +{
>> + struct qmi_tmd *tmd = devdata;
>> +
>> + if (!tmd)
>> + return -EINVAL;
>> +
>> + if (level > tmd->max_state)
>> + return -EINVAL;
>> +
>> + if (tmd->cur_state == level)
>> + return 0;
>> +
>> + tmd->cur_state = level;
>> +
>> + return qmi_tmd_send_state_request(tmd);
>> +}
>> +
>> +static const struct remoteproc_cooling_ops qmi_rproc_ops = {
>> + .get_max_level = qmi_get_max_level,
>> + .get_cur_level = qmi_get_cur_level,
>> + .set_cur_level = qmi_set_cur_level,
>> +};
>> +
>> +static int qmi_register_cooling_device(struct qmi_tmd *tmd)
>> +{
>> + struct remoteproc_cdev *rproc_cdev;
>> +
>> + rproc_cdev = remoteproc_cooling_register(tmd->np,
>> + tmd->type,
>> + &qmi_rproc_ops,
>> + tmd);
>> +
>> + if (IS_ERR(rproc_cdev))
>> + return dev_err_probe(tmd->client->dev, PTR_ERR(rproc_cdev),
>> + "Failed to register cooling device %s\n",
>> + tmd->qmi_name);
>> +
>> + tmd->rproc_cdev = rproc_cdev;
>> + return 0;
>> +}
>> +
>> +/*
>> + * Init a single TMD control by registering a cooling device for it, or
>> + * synchronising state with the remote subsystem if recovering from a service
>> + * restart. This is called when the TMD service starts up.
>> + */
>> +static int qmi_tmd_init_control(struct qmi_tmd_client *client, const char *label,
>> + u8 max_state)
>> +{
>> + struct qmi_tmd *tmd = NULL;
>> +
>> + list_for_each_entry(tmd, &client->cdev_list, node)
>> + if (!strncasecmp(tmd->qmi_name, label,
>> + QMI_TMD_MITIGATION_DEV_ID_LENGTH_MAX_V01 + 1))
>> + goto found;
>> +
>> + dev_dbg(client->dev,
>> + "TMD '%s' available in firmware but not specified in DT\n",
>> + label);
>> + return 0;
>> +
>> +found:
>> + tmd->max_state = max_state;
>> + /*
>> + * If the cooling device already exists then the QMI service went away and
>> + * came back. So just make sure the current cooling device state is
>> + * reflected on the remote side and then return.
>> + */
>> + if (tmd->rproc_cdev)
>> + return qmi_tmd_send_state_request(tmd);
>> +
>> + return qmi_register_cooling_device(tmd);
>> +}
>> +
>> +/*
>> + * When the QMI service starts up on a remote subsystem this function will fetch
>> + * the list of TMDs on the subsystem, match it to the TMDs specified in devicetree
>> + * and call qmi_tmd_init_control() for each
>> + */
>> +static void qmi_tmd_svc_arrive(struct work_struct *work)
>> +{
>> + struct qmi_tmd_client *client =
>> + container_of(work, struct qmi_tmd_client, svc_arrive_work);
>> +
>> + struct tmd_get_mitigation_device_list_req_msg_v01 req = { 0 };
>> + struct tmd_get_mitigation_device_list_resp_msg_v01 *resp __free(kfree) = NULL;
>> + int ret = 0, i;
>> + struct qmi_txn txn;
>> +
>> + /* resp struct is 1.1kB, allocate it on the heap. */
>> + resp = kzalloc(sizeof(*resp), GFP_KERNEL);
>> + if (!resp)
>> + return;
>> +
>> + /* Get a list of TMDs supported by the remoteproc */
>> + scoped_guard(mutex, &client->mutex) {
>> + ret = qmi_txn_init(&client->handle, &txn,
>> + tmd_get_mitigation_device_list_resp_msg_v01_ei, resp);
>> + if (ret < 0) {
>> + dev_err(client->dev,
>> + "Transaction init error for instance_id: %#x ret %d\n",
>> + client->id, ret);
>> + return;
>> + }
>> +
>> + ret = qmi_send_request(&client->handle, NULL, &txn,
>> + QMI_TMD_GET_MITIGATION_DEVICE_LIST_REQ_V01,
>> + TMD_GET_MITIGATION_DEVICE_LIST_REQ_MSG_V01_MAX_MSG_LEN,
>> + tmd_get_mitigation_device_list_req_msg_v01_ei, &req);
>> + if (ret < 0) {
>> + qmi_txn_cancel(&txn);
>> + return;
>> + }
>> +
>> + ret = qmi_txn_wait(&txn, QMI_TMD_RESP_TIMEOUT);
>> + if (ret < 0) {
>> + dev_err(client->dev, "Transaction wait error for client %#x ret:%d\n",
>> + client->id, ret);
>> + return;
>> + }
>> + if (resp->resp.result != QMI_RESULT_SUCCESS_V01) {
>> + ret = resp->resp.result;
>> + dev_err(client->dev, "Failed to get device list for client %#x ret:%d\n",
>> + client->id, ret);
>> + return;
>> + }
>> +
>> + client->connection_active = true;
>> + }
>> +
>> + for (i = 0; i < resp->mitigation_device_list_len; i++) {
>> + struct tmd_mitigation_dev_list_type_v01 *device =
>> + &resp->mitigation_device_list[i];
>> +
>> + ret = qmi_tmd_init_control(client,
>> + device->mitigation_dev_id.mitigation_dev_id,
>> + device->max_mitigation_level);
>> + if (ret)
>> + break;
>> + }
>> +}
>> +
>> +static void thermal_qmi_net_reset(struct qmi_handle *qmi)
>> +{
>> + struct qmi_tmd_client *client = container_of(qmi, struct qmi_tmd_client, handle);
>> + struct qmi_tmd *tmd = NULL;
>> +
>> + list_for_each_entry(tmd, &client->cdev_list, node) {
>> + qmi_tmd_send_state_request(tmd);
>> + }
>> +}
>> +
>> +static void thermal_qmi_del_server(struct qmi_handle *qmi, struct qmi_service *service)
>> +{
>> + struct qmi_tmd_client *client = container_of(qmi, struct qmi_tmd_client, handle);
>> +
>> + scoped_guard(mutex, &client->mutex)
>> + client->connection_active = false;
>> +}
>> +
>> +static int thermal_qmi_new_server(struct qmi_handle *qmi, struct qmi_service *service)
>> +{
>> + struct qmi_tmd_client *client = container_of(qmi, struct qmi_tmd_client, handle);
>> + struct sockaddr_qrtr sq = { AF_QIPCRTR, service->node, service->port };
>> +
>> + scoped_guard(mutex, &client->mutex)
>> + kernel_connect(qmi->sock, (struct sockaddr_unsized *)&sq, sizeof(sq), 0);
>> +
>> + queue_work(system_highpri_wq, &client->svc_arrive_work);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct qmi_ops thermal_qmi_event_ops = {
>> + .new_server = thermal_qmi_new_server,
>> + .del_server = thermal_qmi_del_server,
>> + .net_reset = thermal_qmi_net_reset,
>> +};
>> +
>> +static void qmi_tmd_cleanup(struct qmi_tmd_client *client)
>> +{
>> + struct qmi_tmd *tmd, *c_next;
>> +
>> + guard(mutex)(&client->mutex);
>> +
>> + client->connection_active = false;
>> +
>> + qmi_handle_release(&client->handle);
>> + cancel_work(&client->svc_arrive_work);
>> + list_for_each_entry_safe(tmd, c_next, &client->cdev_list, node) {
>> + if (tmd->rproc_cdev)
>> + remoteproc_cooling_unregister(tmd->rproc_cdev);
>> +
>> + list_del(&tmd->node);
>> + }
>> +}
>> +
>> +/* Parse the controls and allocate a qmi_tmd for each of them */
>> +static int qmi_tmd_alloc_cdevs(struct qmi_tmd_client *client)
>> +{
>> + struct device *dev = client->dev;
>> + struct device_node *node = dev->of_node;
>> + struct device_node *subnode;
>> + struct qmi_tmd *tmd;
>> + int ret;
>> +
>> + for_each_available_child_of_node_scoped(node, subnode) {
>> + const char *name;
>> +
>> + tmd = devm_kzalloc(dev, sizeof(*tmd), GFP_KERNEL);
>> + if (!tmd)
>> + return dev_err_probe(client->dev, -ENOMEM,
>> + "Couldn't allocate tmd\n");
>> +
>> + tmd->type = devm_kasprintf(client->dev, GFP_KERNEL, "%s",
>> + subnode->name);
>> + if (!tmd->type)
>> + return dev_err_probe(dev, -ENOMEM,
>> + "Couldn't allocate cooling device name\n");
>> +
>> + if (of_property_read_string(subnode, "label", &name))
>> + return dev_err_probe(client->dev, -EINVAL,
>> + "Failed to parse dev name for %s\n",
>> + subnode->name);
>> +
>> + ret = strscpy(tmd->qmi_name, name,
>> + QMI_TMD_MITIGATION_DEV_ID_LENGTH_MAX_V01 + 1);
>> + if (ret == -E2BIG)
>> + return dev_err_probe(dev, -EINVAL, "TMD label %s is too long\n",
>> + name);
>> +
>> + tmd->client = client;
>> + tmd->np = subnode;
>> + tmd->cur_state = 0;
>> + list_add(&tmd->node, &client->cdev_list);
>> + }
>> +
>> + if (list_empty(&client->cdev_list))
>> + return dev_err_probe(client->dev, -EINVAL,
>> + "No cooling devices specified for client %s (%#x)\n",
>> + client->name, client->id);
>> +
>> + return 0;
>> +}
>> +
>> +static int qmi_tmd_client_probe(struct platform_device *pdev)
>> +{
>> + const struct qmi_instance_data *match;
>> + struct qmi_tmd_client *client;
>> + struct device *dev = &pdev->dev;
>> + int ret;
>> +
>> + client = devm_kzalloc(dev, sizeof(*client), GFP_KERNEL);
>> + if (!client)
>> + return -ENOMEM;
>> +
>> + client->dev = dev;
>> +
>> + match = of_device_get_match_data(dev);
>> + if (!match)
>> + return dev_err_probe(dev, -EINVAL, "No match data\n");
>> +
>> + client->id = match->id;
>> + client->name = match->name;
>> +
>> + mutex_init(&client->mutex);
>> + INIT_LIST_HEAD(&client->cdev_list);
>> + INIT_WORK(&client->svc_arrive_work, qmi_tmd_svc_arrive);
>> +
>> + ret = qmi_tmd_alloc_cdevs(client);
>> + if (ret)
>> + return ret;
>> +
>> + platform_set_drvdata(pdev, client);
>> +
>> + ret = qmi_handle_init(&client->handle,
>> + TMD_GET_MITIGATION_DEVICE_LIST_RESP_MSG_V01_MAX_MSG_LEN,
>> + &thermal_qmi_event_ops, NULL);
>> + if (ret < 0)
>> + return dev_err_probe(client->dev, ret, "QMI handle init failed for client %#x\n",
>> + client->id);
>> +
>> + ret = qmi_add_lookup(&client->handle, TMD_SERVICE_ID_V01, TMD_SERVICE_VERS_V01,
>> + client->id);
>> + if (ret < 0) {
>> + qmi_handle_release(&client->handle);
>> + return dev_err_probe(client->dev, ret, "QMI register failed for client 0x%x\n",
>> + client->id);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void qmi_tmd_client_remove(struct platform_device *pdev)
>> +{
>> + struct qmi_tmd_client *client = platform_get_drvdata(pdev);
>> +
>> + qmi_tmd_cleanup(client);
>> +}
>> +
>> +static const struct qmi_instance_data qmi_cdsp = {
>> + .id = CDSP_INSTANCE_ID,
>> + .name = "cdsp",
>> +};
>> +
>> +static const struct qmi_instance_data qmi_cdsp1 = {
>> + .id = CDSP1_INSTANCE_ID,
>> + .name = "cdsp1",
>> +};
>> +
>> +static const struct of_device_id qmi_tmd_device_table[] = {
>> + {
>> + .compatible = "qcom,qmi-cooling-cdsp",
>> + .data = &qmi_cdsp,
>> + },
>> + {
>> + .compatible = "qcom,qmi-cooling-cdsp1",
>> + .data = &qmi_cdsp1,
>> + },
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(of, qmi_tmd_device_table);
>> +
>> +static struct platform_driver qmi_tmd_device_driver = {
>> + .probe = qmi_tmd_client_probe,
>> + .remove = qmi_tmd_client_remove,
>> + .driver = {
>> + .name = "qcom-qmi-cooling",
>> + .of_match_table = qmi_tmd_device_table,
>> + },
>> +};
>> +
>> +module_platform_driver(qmi_tmd_device_driver);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_DESCRIPTION("Qualcomm QMI Thermal Mitigation Device driver");
>> diff --git a/drivers/soc/qcom/qmi-cooling.h b/drivers/soc/qcom/qmi-cooling.h
>> new file mode 100644
>> index 000000000000..e33f4c5979e5
>> --- /dev/null
>> +++ b/drivers/soc/qcom/qmi-cooling.h
>> @@ -0,0 +1,429 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2017, The Linux Foundation
>> + * Copyright (c) 2023, Linaro Limited
>> + */
>> +
>> +#ifndef __QCOM_COOLING_H__
>> +#define __QCOM_COOLING_H__
>> +
>> +#include <linux/soc/qcom/qmi.h>
>> +
>> +#define TMD_SERVICE_ID_V01 0x18
>> +#define TMD_SERVICE_VERS_V01 0x01
>> +
>> +#define QMI_TMD_GET_MITIGATION_DEVICE_LIST_RESP_V01 0x0020
>> +#define QMI_TMD_GET_MITIGATION_LEVEL_REQ_V01 0x0022
>> +#define QMI_TMD_GET_SUPPORTED_MSGS_REQ_V01 0x001E
>> +#define QMI_TMD_SET_MITIGATION_LEVEL_REQ_V01 0x0021
>> +#define QMI_TMD_REGISTER_NOTIFICATION_MITIGATION_LEVEL_RESP_V01 0x0023
>> +#define QMI_TMD_GET_SUPPORTED_MSGS_RESP_V01 0x001E
>> +#define QMI_TMD_SET_MITIGATION_LEVEL_RESP_V01 0x0021
>> +#define QMI_TMD_DEREGISTER_NOTIFICATION_MITIGATION_LEVEL_RESP_V01 0x0024
>> +#define QMI_TMD_MITIGATION_LEVEL_REPORT_IND_V01 0x0025
>> +#define QMI_TMD_GET_MITIGATION_LEVEL_RESP_V01 0x0022
>> +#define QMI_TMD_GET_SUPPORTED_FIELDS_REQ_V01 0x001F
>> +#define QMI_TMD_GET_MITIGATION_DEVICE_LIST_REQ_V01 0x0020
>> +#define QMI_TMD_REGISTER_NOTIFICATION_MITIGATION_LEVEL_REQ_V01 0x0023
>> +#define QMI_TMD_DEREGISTER_NOTIFICATION_MITIGATION_LEVEL_REQ_V01 0x0024
>> +#define QMI_TMD_GET_SUPPORTED_FIELDS_RESP_V01 0x001F
>> +
>> +#define QMI_TMD_MITIGATION_DEV_ID_LENGTH_MAX_V01 32
>> +#define QMI_TMD_MITIGATION_DEV_LIST_MAX_V01 32
>> +
>> +struct tmd_mitigation_dev_id_type_v01 {
>> + char mitigation_dev_id[QMI_TMD_MITIGATION_DEV_ID_LENGTH_MAX_V01 + 1];
>> +};
>> +
>> +static const struct qmi_elem_info tmd_mitigation_dev_id_type_v01_ei[] = {
>> + {
>> + .data_type = QMI_STRING,
>> + .elem_len = QMI_TMD_MITIGATION_DEV_ID_LENGTH_MAX_V01 + 1,
>> + .elem_size = sizeof(char),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0,
>> + .offset = offsetof(struct tmd_mitigation_dev_id_type_v01,
>> + mitigation_dev_id),
>> + },
>> + {
>> + .data_type = QMI_EOTI,
>> + .array_type = NO_ARRAY,
>> + .tlv_type = QMI_COMMON_TLV_TYPE,
>> + },
>> +};
>> +
>> +struct tmd_mitigation_dev_list_type_v01 {
>> + struct tmd_mitigation_dev_id_type_v01 mitigation_dev_id;
>> + u8 max_mitigation_level;
>> +};
>> +
>> +static const struct qmi_elem_info tmd_mitigation_dev_list_type_v01_ei[] = {
>> + {
>> + .data_type = QMI_STRUCT,
>> + .elem_len = 1,
>> + .elem_size = sizeof(struct tmd_mitigation_dev_id_type_v01),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0,
>> + .offset = offsetof(struct tmd_mitigation_dev_list_type_v01,
>> + mitigation_dev_id),
>> + .ei_array = tmd_mitigation_dev_id_type_v01_ei,
>> + },
>> + {
>> + .data_type = QMI_UNSIGNED_1_BYTE,
>> + .elem_len = 1,
>> + .elem_size = sizeof(uint8_t),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0,
>> + .offset = offsetof(struct tmd_mitigation_dev_list_type_v01,
>> + max_mitigation_level),
>> + },
>> + {
>> + .data_type = QMI_EOTI,
>> + .array_type = NO_ARRAY,
>> + .tlv_type = QMI_COMMON_TLV_TYPE,
>> + },
>> +};
>> +
>> +struct tmd_get_mitigation_device_list_req_msg_v01 {
>> + char placeholder;
>> +};
>> +
>> +#define TMD_GET_MITIGATION_DEVICE_LIST_REQ_MSG_V01_MAX_MSG_LEN 0
>> +const struct qmi_elem_info tmd_get_mitigation_device_list_req_msg_v01_ei[] = {
>> + {
>> + .data_type = QMI_EOTI,
>> + .array_type = NO_ARRAY,
>> + .tlv_type = QMI_COMMON_TLV_TYPE,
>> + },
>> +};
>> +
>> +struct tmd_get_mitigation_device_list_resp_msg_v01 {
>> + struct qmi_response_type_v01 resp;
>> + u8 mitigation_device_list_valid;
>> + u32 mitigation_device_list_len;
>> + struct tmd_mitigation_dev_list_type_v01
>> + mitigation_device_list[QMI_TMD_MITIGATION_DEV_LIST_MAX_V01];
>> +};
>> +
>> +#define TMD_GET_MITIGATION_DEVICE_LIST_RESP_MSG_V01_MAX_MSG_LEN 1099
>> +static const struct qmi_elem_info tmd_get_mitigation_device_list_resp_msg_v01_ei[] = {
>> + {
>> + .data_type = QMI_STRUCT,
>> + .elem_len = 1,
>> + .elem_size = sizeof(struct qmi_response_type_v01),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x02,
>> + .offset = offsetof(struct tmd_get_mitigation_device_list_resp_msg_v01,
>> + resp),
>> + .ei_array = qmi_response_type_v01_ei,
>> + },
>> + {
>> + .data_type = QMI_OPT_FLAG,
>> + .elem_len = 1,
>> + .elem_size = sizeof(uint8_t),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x10,
>> + .offset = offsetof(struct tmd_get_mitigation_device_list_resp_msg_v01,
>> + mitigation_device_list_valid),
>> + },
>> + {
>> + .data_type = QMI_DATA_LEN,
>> + .elem_len = 1,
>> + .elem_size = sizeof(uint8_t),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x10,
>> + .offset = offsetof(struct tmd_get_mitigation_device_list_resp_msg_v01,
>> + mitigation_device_list_len),
>> + },
>> + {
>> + .data_type = QMI_STRUCT,
>> + .elem_len = QMI_TMD_MITIGATION_DEV_LIST_MAX_V01,
>> + .elem_size = sizeof(struct tmd_mitigation_dev_list_type_v01),
>> + .array_type = VAR_LEN_ARRAY,
>> + .tlv_type = 0x10,
>> + .offset = offsetof(struct tmd_get_mitigation_device_list_resp_msg_v01,
>> + mitigation_device_list),
>> + .ei_array = tmd_mitigation_dev_list_type_v01_ei,
>> + },
>> + {
>> + .data_type = QMI_EOTI,
>> + .array_type = NO_ARRAY,
>> + .tlv_type = QMI_COMMON_TLV_TYPE,
>> + },
>> +};
>> +
>> +struct tmd_set_mitigation_level_req_msg_v01 {
>> + struct tmd_mitigation_dev_id_type_v01 mitigation_dev_id;
>> + u8 mitigation_level;
>> +};
>> +
>> +#define TMD_SET_MITIGATION_LEVEL_REQ_MSG_V01_MAX_MSG_LEN 40
>> +static const struct qmi_elem_info tmd_set_mitigation_level_req_msg_v01_ei[] = {
>> + {
>> + .data_type = QMI_STRUCT,
>> + .elem_len = 1,
>> + .elem_size = sizeof(struct tmd_mitigation_dev_id_type_v01),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x01,
>> + .offset = offsetof(struct tmd_set_mitigation_level_req_msg_v01,
>> + mitigation_dev_id),
>> + .ei_array = tmd_mitigation_dev_id_type_v01_ei,
>> + },
>> + {
>> + .data_type = QMI_UNSIGNED_1_BYTE,
>> + .elem_len = 1,
>> + .elem_size = sizeof(uint8_t),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x02,
>> + .offset = offsetof(struct tmd_set_mitigation_level_req_msg_v01,
>> + mitigation_level),
>> + },
>> + {
>> + .data_type = QMI_EOTI,
>> + .array_type = NO_ARRAY,
>> + .tlv_type = QMI_COMMON_TLV_TYPE,
>> + },
>> +};
>> +
>> +struct tmd_set_mitigation_level_resp_msg_v01 {
>> + struct qmi_response_type_v01 resp;
>> +};
>> +
>> +#define TMD_SET_MITIGATION_LEVEL_RESP_MSG_V01_MAX_MSG_LEN 7
>> +static const struct qmi_elem_info tmd_set_mitigation_level_resp_msg_v01_ei[] = {
>> + {
>> + .data_type = QMI_STRUCT,
>> + .elem_len = 1,
>> + .elem_size = sizeof(struct qmi_response_type_v01),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x02,
>> + .offset = offsetof(struct tmd_set_mitigation_level_resp_msg_v01, resp),
>> + .ei_array = qmi_response_type_v01_ei,
>> + },
>> + {
>> + .data_type = QMI_EOTI,
>> + .array_type = NO_ARRAY,
>> + .tlv_type = QMI_COMMON_TLV_TYPE,
>> + },
>> +};
>> +
>> +struct tmd_get_mitigation_level_req_msg_v01 {
>> + struct tmd_mitigation_dev_id_type_v01 mitigation_device;
>> +};
>> +
>> +#define TMD_GET_MITIGATION_LEVEL_REQ_MSG_V01_MAX_MSG_LEN 36
>> +
>> +static const struct qmi_elem_info tmd_get_mitigation_level_req_msg_v01_ei[] = {
>> + {
>> + .data_type = QMI_STRUCT,
>> + .elem_len = 1,
>> + .elem_size = sizeof(struct tmd_mitigation_dev_id_type_v01),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x01,
>> + .offset = offsetof(struct tmd_get_mitigation_level_req_msg_v01,
>> + mitigation_device),
>> + .ei_array = tmd_mitigation_dev_id_type_v01_ei,
>> + },
>> + {
>> + .data_type = QMI_EOTI,
>> + .array_type = NO_ARRAY,
>> + .tlv_type = QMI_COMMON_TLV_TYPE,
>> + },
>> +};
>> +
>> +struct tmd_get_mitigation_level_resp_msg_v01 {
>> + struct qmi_response_type_v01 resp;
>> + u8 current_mitigation_level_valid;
>> + u8 current_mitigation_level;
>> + u8 requested_mitigation_level_valid;
>> + u8 requested_mitigation_level;
>> +};
>> +
>> +#define TMD_GET_MITIGATION_LEVEL_RESP_MSG_V01_MAX_MSG_LEN 15
>> +static const struct qmi_elem_info tmd_get_mitigation_level_resp_msg_ei[] = {
>> + {
>> + .data_type = QMI_STRUCT,
>> + .elem_len = 1,
>> + .elem_size = sizeof(struct qmi_response_type_v01),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x02,
>> + .offset = offsetof(struct tmd_get_mitigation_level_resp_msg_v01, resp),
>> + .ei_array = qmi_response_type_v01_ei,
>> + },
>> + {
>> + .data_type = QMI_OPT_FLAG,
>> + .elem_len = 1,
>> + .elem_size = sizeof(uint8_t),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x10,
>> + .offset = offsetof(struct tmd_get_mitigation_level_resp_msg_v01,
>> + current_mitigation_level_valid),
>> + },
>> + {
>> + .data_type = QMI_UNSIGNED_1_BYTE,
>> + .elem_len = 1,
>> + .elem_size = sizeof(uint8_t),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x10,
>> + .offset = offsetof(struct tmd_get_mitigation_level_resp_msg_v01,
>> + current_mitigation_level),
>> + },
>> + {
>> + .data_type = QMI_OPT_FLAG,
>> + .elem_len = 1,
>> + .elem_size = sizeof(uint8_t),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x11,
>> + .offset = offsetof(struct tmd_get_mitigation_level_resp_msg_v01,
>> + requested_mitigation_level_valid),
>> + },
>> + {
>> + .data_type = QMI_UNSIGNED_1_BYTE,
>> + .elem_len = 1,
>> + .elem_size = sizeof(uint8_t),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x11,
>> + .offset = offsetof(struct tmd_get_mitigation_level_resp_msg_v01,
>> + requested_mitigation_level),
>> + },
>> + {
>> + .data_type = QMI_EOTI,
>> + .array_type = NO_ARRAY,
>> + .tlv_type = QMI_COMMON_TLV_TYPE,
>> + },
>> +};
>> +
>> +struct tmd_register_notification_mitigation_level_req_msg_v01 {
>> + struct tmd_mitigation_dev_id_type_v01 mitigation_device;
>> +};
>> +
>> +#define TMD_REGISTER_NOTIFICATION_MITIGATION_LEVEL_REQ_MSG_V01_MAX_MSG_LEN 36
>> +static const struct qmi_elem_info
>> + tmd_register_notification_mitigation_level_req_msg_v01_ei[] = {
>> + {
>> + .data_type = QMI_STRUCT,
>> + .elem_len = 1,
>> + .elem_size = sizeof(struct tmd_mitigation_dev_id_type_v01),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x01,
>> + .offset = offsetof(
>> + struct tmd_register_notification_mitigation_level_req_msg_v01,
>> + mitigation_device),
>> + .ei_array = tmd_mitigation_dev_id_type_v01_ei,
>> + },
>> + {
>> + .data_type = QMI_EOTI,
>> + .array_type = NO_ARRAY,
>> + .tlv_type = QMI_COMMON_TLV_TYPE,
>> + },
>> + };
>> +
>> +struct tmd_register_notification_mitigation_level_resp_msg_v01 {
>> + struct qmi_response_type_v01 resp;
>> +};
>> +
>> +#define TMD_REGISTER_NOTIFICATION_MITIGATION_LEVEL_RESP_MSG_V01_MAX_MSG_LEN 7
>> +static const struct qmi_elem_info
>> + tmd_register_notification_mitigation_level_resp_msg_v01_ei[] = {
>> + {
>> + .data_type = QMI_STRUCT,
>> + .elem_len = 1,
>> + .elem_size = sizeof(struct qmi_response_type_v01),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x02,
>> + .offset = offsetof(
>> + struct tmd_register_notification_mitigation_level_resp_msg_v01,
>> + resp),
>> + .ei_array = qmi_response_type_v01_ei,
>> + },
>> + {
>> + .data_type = QMI_EOTI,
>> + .array_type = NO_ARRAY,
>> + .tlv_type = QMI_COMMON_TLV_TYPE,
>> + },
>> + };
>> +
>> +struct tmd_deregister_notification_mitigation_level_req_msg_v01 {
>> + struct tmd_mitigation_dev_id_type_v01 mitigation_device;
>> +};
>> +
>> +#define TMD_DEREGISTER_NOTIFICATION_MITIGATION_LEVEL_REQ_MSG_V01_MAX_MSG_LEN 36
>> +static const struct qmi_elem_info
>> + tmd_deregister_notification_mitigation_level_req_msg_v01_ei[] = {
>> + {
>> + .data_type = QMI_STRUCT,
>> + .elem_len = 1,
>> + .elem_size = sizeof(struct tmd_mitigation_dev_id_type_v01),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x01,
>> + .offset = offsetof(
>> + struct tmd_deregister_notification_mitigation_level_req_msg_v01,
>> + mitigation_device),
>> + .ei_array = tmd_mitigation_dev_id_type_v01_ei,
>> + },
>> + {
>> + .data_type = QMI_EOTI,
>> + .array_type = NO_ARRAY,
>> + .tlv_type = QMI_COMMON_TLV_TYPE,
>> + },
>> + };
>> +
>> +struct tmd_deregister_notification_mitigation_level_resp_msg_v01 {
>> + struct qmi_response_type_v01 resp;
>> +};
>> +
>> +#define TMD_DEREGISTER_NOTIFICATION_MITIGATION_LEVEL_RESP_MSG_V01_MAX_MSG_LEN 7
>> +static const struct qmi_elem_info
>> + tmd_deregister_notification_mitigation_level_resp_msg_v01_ei[] = {
>> + {
>> + .data_type = QMI_STRUCT,
>> + .elem_len = 1,
>> + .elem_size = sizeof(struct qmi_response_type_v01),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x02,
>> + .offset = offsetof(
>> + struct tmd_deregister_notification_mitigation_level_resp_msg_v01,
>> + resp),
>> + .ei_array = qmi_response_type_v01_ei,
>> + },
>> + {
>> + .data_type = QMI_EOTI,
>> + .array_type = NO_ARRAY,
>> + .tlv_type = QMI_COMMON_TLV_TYPE,
>> + },
>> + };
>> +
>> +struct tmd_mitigation_level_report_ind_msg_v01 {
>> + struct tmd_mitigation_dev_id_type_v01 mitigation_device;
>> + u8 current_mitigation_level;
>> +};
>> +
>> +#define TMD_MITIGATION_LEVEL_REPORT_IND_MSG_V01_MAX_MSG_LEN 40
>> +static const struct qmi_elem_info tmd_mitigation_level_report_ind_msg_v01_ei[] = {
>> + {
>> + .data_type = QMI_STRUCT,
>> + .elem_len = 1,
>> + .elem_size = sizeof(struct tmd_mitigation_dev_id_type_v01),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x01,
>> + .offset = offsetof(struct tmd_mitigation_level_report_ind_msg_v01,
>> + mitigation_device),
>> + .ei_array = tmd_mitigation_dev_id_type_v01_ei,
>> + },
>> + {
>> + .data_type = QMI_UNSIGNED_1_BYTE,
>> + .elem_len = 1,
>> + .elem_size = sizeof(uint8_t),
>> + .array_type = NO_ARRAY,
>> + .tlv_type = 0x02,
>> + .offset = offsetof(struct tmd_mitigation_level_report_ind_msg_v01,
>> + current_mitigation_level),
>> + },
>> + {
>> + .data_type = QMI_EOTI,
>> + .array_type = NO_ARRAY,
>> + .tlv_type = QMI_COMMON_TLV_TYPE,
>> + },
>> +};
>> +
>> +#endif /* __QMI_COOLING_INTERNAL_H__ */
>> --
>> 2.34.1
>>
>
next prev parent reply other threads:[~2026-03-16 10:19 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-27 15:57 [PATCH v2 0/8] Add RemoteProc cooling support Gaurav Kohli
2026-01-27 15:57 ` [PATCH v2 1/8] thermal: Add Remote Proc cooling driver Gaurav Kohli
2026-01-28 11:32 ` Krzysztof Kozlowski
2026-01-30 6:39 ` Gaurav Kohli
2026-02-08 10:08 ` Krzysztof Kozlowski
2026-01-28 11:36 ` Krzysztof Kozlowski
2026-01-30 6:42 ` Gaurav Kohli
2026-01-30 5:39 ` kernel test robot
2026-01-30 6:47 ` kernel test robot
2026-03-06 9:19 ` Daniel Lezcano
2026-03-06 9:27 ` Lukasz Luba
2026-03-09 6:34 ` Gaurav Kohli
2026-01-27 15:57 ` [PATCH v2 2/8] dt-bindings: thermal: Add qcom,qmi-cooling yaml bindings Gaurav Kohli
2026-01-28 11:27 ` Krzysztof Kozlowski
2026-01-29 12:06 ` Gaurav Kohli
2026-02-08 10:06 ` Krzysztof Kozlowski
2026-02-11 7:37 ` Gaurav Kohli
2026-02-11 8:13 ` Krzysztof Kozlowski
2026-02-20 7:29 ` Gaurav Kohli
2026-02-20 7:44 ` Krzysztof Kozlowski
2026-02-24 12:09 ` Gaurav Kohli
2026-02-24 12:17 ` Krzysztof Kozlowski
2026-03-16 19:57 ` Daniel Lezcano
2026-03-18 10:17 ` Gaurav Kohli
2026-03-19 9:51 ` Konrad Dybcio
2026-03-21 9:00 ` Daniel Lezcano
2026-03-23 12:29 ` Konrad Dybcio
2026-03-23 14:19 ` Daniel Lezcano
2026-03-23 14:25 ` Gaurav Kohli
2026-02-24 12:52 ` Dmitry Baryshkov
2026-01-28 11:28 ` Krzysztof Kozlowski
2026-01-29 12:12 ` Gaurav Kohli
2026-01-29 0:45 ` Dmitry Baryshkov
2026-01-30 7:08 ` Gaurav Kohli
2026-01-30 9:02 ` Dmitry Baryshkov
2026-01-27 15:57 ` [PATCH v2 3/8] remoteproc: qcom: probe all child devices Gaurav Kohli
2026-01-27 16:50 ` Dmitry Baryshkov
2026-01-27 15:57 ` [PATCH v2 4/8] thermal: qcom: add qmi-cooling driver Gaurav Kohli
2026-01-30 9:05 ` kernel test robot
2026-03-06 9:31 ` Daniel Lezcano
2026-03-16 10:19 ` Gaurav Kohli [this message]
2026-03-13 14:15 ` Daniel Lezcano
2026-03-17 7:25 ` Gaurav Kohli
2026-01-27 15:57 ` [PATCH v2 5/8] arm64: dts: qcom: lemans: Enable CDSP cooling Gaurav Kohli
2026-01-29 0:43 ` Dmitry Baryshkov
2026-01-29 12:10 ` Gaurav Kohli
2026-01-29 12:29 ` Dmitry Baryshkov
2026-01-29 13:40 ` Gaurav Kohli
2026-01-30 1:20 ` Dmitry Baryshkov
2026-01-27 15:57 ` [PATCH v2 6/8] arm64: dts: qcom: talos: " Gaurav Kohli
2026-01-27 15:57 ` [PATCH v2 7/8] arm64: dts: qcom: kodiak: " Gaurav Kohli
2026-01-27 15:57 ` [PATCH v2 8/8] arm64: dts: qcom: monaco: " Gaurav Kohli
2026-03-06 9:09 ` [PATCH v2 0/8] Add RemoteProc cooling support Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0f0ffa3e-36b0-4891-939c-8bfa89ec7e84@oss.qualcomm.com \
--to=gaurav.kohli@oss.qualcomm.com \
--cc=amit.kucheria@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=casey.connolly@linaro.org \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@oss.qualcomm.com \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=manaf.pallikunhi@oss.qualcomm.com \
--cc=mani@kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=robh@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox