From: Terry Bowman <terry.bowman@amd.com>
To: <linux-cxl@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-pci@vger.kernel.org>, <nifan.cxl@gmail.com>,
<dave@stgolabs.net>, <jonathan.cameron@huawei.com>,
<dave.jiang@intel.com>, <alison.schofield@intel.com>,
<vishal.l.verma@intel.com>, <dan.j.williams@intel.com>,
<bhelgaas@google.com>, <mahesh@linux.ibm.com>,
<ira.weiny@intel.com>, <oohall@gmail.com>,
<Benjamin.Cheatham@amd.com>, <rrichter@amd.com>,
<nathan.fontenot@amd.com>, <terry.bowman@amd.com>,
<Smita.KoralahalliChannabasappa@amd.com>, <lukas@wunner.de>,
<ming.li@zohomail.com>, <PradeepVineshReddy.Kodamati@amd.com>
Subject: [PATCH v6 09/17] cxl/pci: Update RAS handler interfaces to also support CXL PCIe Ports
Date: Fri, 7 Feb 2025 18:29:33 -0600 [thread overview]
Message-ID: <20250208002941.4135321-10-terry.bowman@amd.com> (raw)
In-Reply-To: <20250208002941.4135321-1-terry.bowman@amd.com>
CXL PCIe Port Protocol Error handling support will be added to the
CXL drivers in the future. In preparation, rename the existing
interfaces to support handling all CXL PCIe Port Protocol Errors.
The driver's RAS support functions currently rely on a 'struct
cxl_dev_state' type parameter, which is not available for CXL Port
devices. However, since the same CXL RAS capability structure is
needed across most CXL components and devices, a common handling
approach should be adopted.
To accommodate this, update the __cxl_handle_cor_ras() and
__cxl_handle_ras() functions to use a `struct device` instead of
`struct cxl_dev_state`.
No functional changes are introduced.
[1] CXL 3.1 Spec, 8.2.4 CXL.cache and CXL.mem Registers
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
---
drivers/cxl/core/pci.c | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
index 4af39abbfab3..0adebf261fe7 100644
--- a/drivers/cxl/core/pci.c
+++ b/drivers/cxl/core/pci.c
@@ -652,7 +652,7 @@ void read_cdat_data(struct cxl_port *port)
}
EXPORT_SYMBOL_NS_GPL(read_cdat_data, "CXL");
-static void __cxl_handle_cor_ras(struct cxl_dev_state *cxlds,
+static void __cxl_handle_cor_ras(struct device *dev,
void __iomem *ras_base)
{
void __iomem *addr;
@@ -663,10 +663,8 @@ static void __cxl_handle_cor_ras(struct cxl_dev_state *cxlds,
addr = ras_base + CXL_RAS_CORRECTABLE_STATUS_OFFSET;
status = readl(addr);
- if (!(status & CXL_RAS_CORRECTABLE_STATUS_MASK)) {
- dev_err(cxl_dev, "%s():%d: CE Status is empty\n", __func__, __LINE__);
+ if (!(status & CXL_RAS_CORRECTABLE_STATUS_MASK))
return;
- }
writel(status & CXL_RAS_CORRECTABLE_STATUS_MASK, addr);
if (is_cxl_memdev(cxl_dev))
@@ -677,7 +675,7 @@ static void __cxl_handle_cor_ras(struct cxl_dev_state *cxlds,
static void cxl_handle_endpoint_cor_ras(struct cxl_dev_state *cxlds)
{
- return __cxl_handle_cor_ras(cxlds, cxlds->regs.ras);
+ return __cxl_handle_cor_ras(&cxlds->cxlmd->dev, cxlds->regs.ras);
}
/* CXL spec rev3.0 8.2.4.16.1 */
@@ -701,8 +699,7 @@ static void header_log_copy(void __iomem *ras_base, u32 *log)
* Log the state of the RAS status registers and prepare them to log the
* next error status. Return 1 if reset needed.
*/
-static bool __cxl_handle_ras(struct cxl_dev_state *cxlds,
- void __iomem *ras_base)
+static bool __cxl_handle_ras(struct device *dev, void __iomem *ras_base)
{
u32 hl[CXL_HEADERLOG_SIZE_U32];
void __iomem *addr;
@@ -729,7 +726,7 @@ static bool __cxl_handle_ras(struct cxl_dev_state *cxlds,
}
header_log_copy(ras_base, hl);
- trace_cxl_aer_uncorrectable_error(cxlds->cxlmd, status, fe, hl);
+ trace_cxl_aer_uncorrectable_error(to_cxl_memdev(dev), status, fe, hl);
writel(status & CXL_RAS_UNCORRECTABLE_STATUS_MASK, addr);
return true;
@@ -737,7 +734,7 @@ static bool __cxl_handle_ras(struct cxl_dev_state *cxlds,
static bool cxl_handle_endpoint_ras(struct cxl_dev_state *cxlds)
{
- return __cxl_handle_ras(cxlds, cxlds->regs.ras);
+ return __cxl_handle_ras(&cxlds->cxlmd->dev, cxlds->regs.ras);
}
#ifdef CONFIG_PCIEAER_CXL
@@ -831,13 +828,13 @@ EXPORT_SYMBOL_NS_GPL(cxl_dport_init_ras_reporting, "CXL");
static void cxl_handle_rdport_cor_ras(struct cxl_dev_state *cxlds,
struct cxl_dport *dport)
{
- return __cxl_handle_cor_ras(cxlds, dport->regs.ras);
+ return __cxl_handle_cor_ras(&cxlds->cxlmd->dev, dport->regs.ras);
}
static bool cxl_handle_rdport_ras(struct cxl_dev_state *cxlds,
struct cxl_dport *dport)
{
- return __cxl_handle_ras(cxlds, dport->regs.ras);
+ return __cxl_handle_ras(&cxlds->cxlmd->dev, dport->regs.ras);
}
/*
--
2.34.1
next prev parent reply other threads:[~2025-02-08 0:31 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-08 0:29 [PATCH v6 00/17] Enable CXL PCIe port protocol error handling and logging Terry Bowman
2025-02-08 0:29 ` [PATCH v6 01/17] PCI/AER: Introduce 'struct cxl_err_handlers' and add to 'struct pci_driver' Terry Bowman
2025-02-08 0:29 ` [PATCH v6 02/17] PCI/AER: Rename AER driver's interfaces to also indicate CXL PCIe Port support Terry Bowman
2025-02-08 0:29 ` [PATCH v6 03/17] CXL/PCI: Introduce PCIe helper functions pcie_is_cxl() and pcie_is_cxl_port() Terry Bowman
2025-02-08 0:29 ` [PATCH v6 04/17] PCI/AER: Modify AER driver logging to report CXL or PCIe bus error type Terry Bowman
2025-02-08 0:29 ` [PATCH v6 05/17] PCI/AER: Add CXL PCIe Port correctable error support in AER service driver Terry Bowman
2025-02-08 0:29 ` [PATCH v6 06/17] PCI/AER: Add CXL PCIe Port uncorrectable error recovery " Terry Bowman
2025-02-10 18:43 ` Gregory Price
2025-02-10 20:13 ` Gregory Price
2025-02-08 0:29 ` [PATCH v6 07/17] cxl/pci: Map CXL PCIe Root Port and Downstream Switch Port RAS registers Terry Bowman
2025-02-08 0:29 ` [PATCH v6 08/17] cxl/pci: Map CXL PCIe Upstream " Terry Bowman
2025-02-08 0:29 ` Terry Bowman [this message]
2025-02-10 20:16 ` [PATCH v6 09/17] cxl/pci: Update RAS handler interfaces to also support CXL PCIe Ports Gregory Price
2025-02-10 20:36 ` Bowman, Terry
2025-02-08 0:29 ` [PATCH v6 10/17] cxl/pci: Add log message for unmapped registers in existing RAS handlers Terry Bowman
2025-02-08 0:29 ` [PATCH v6 11/17] cxl/pci: Change find_cxl_port() to non-static Terry Bowman
2025-02-08 0:29 ` [PATCH v6 12/17] cxl/pci: Add error handler for CXL PCIe Port RAS errors Terry Bowman
2025-02-08 0:29 ` [PATCH v6 13/17] cxl/pci: Add trace logging " Terry Bowman
2025-02-08 0:29 ` [PATCH v6 14/17] cxl/pci: Update CXL Port RAS logging to also display PCIe SBDF Terry Bowman
2025-02-08 0:29 ` [PATCH v6 15/17] cxl/pci: Add support to assign and clear pci_driver::cxl_err_handlers Terry Bowman
2025-02-08 0:29 ` [PATCH v6 16/17] PCI/AER: Enable internal errors for CXL Upstream and Downstream Switch Ports Terry Bowman
2025-02-08 0:29 ` [PATCH v6 17/17] cxl/pci: Handle CXL Endpoint and RCH protocol errors separately from PCIe errors Terry Bowman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250208002941.4135321-10-terry.bowman@amd.com \
--to=terry.bowman@amd.com \
--cc=Benjamin.Cheatham@amd.com \
--cc=PradeepVineshReddy.Kodamati@amd.com \
--cc=Smita.KoralahalliChannabasappa@amd.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=mahesh@linux.ibm.com \
--cc=ming.li@zohomail.com \
--cc=nathan.fontenot@amd.com \
--cc=nifan.cxl@gmail.com \
--cc=oohall@gmail.com \
--cc=rrichter@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox