public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Terry Bowman <terry.bowman@amd.com>
To: <linux-cxl@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-pci@vger.kernel.org>, <nifan.cxl@gmail.com>,
	<dave@stgolabs.net>, <jonathan.cameron@huawei.com>,
	<dave.jiang@intel.com>, <alison.schofield@intel.com>,
	<vishal.l.verma@intel.com>, <dan.j.williams@intel.com>,
	<bhelgaas@google.com>, <mahesh@linux.ibm.com>,
	<ira.weiny@intel.com>, <oohall@gmail.com>,
	<Benjamin.Cheatham@amd.com>, <rrichter@amd.com>,
	<nathan.fontenot@amd.com>, <terry.bowman@amd.com>,
	<Smita.KoralahalliChannabasappa@amd.com>, <lukas@wunner.de>,
	<ming.li@zohomail.com>, <PradeepVineshReddy.Kodamati@amd.com>
Subject: [PATCH v6 05/17] PCI/AER: Add CXL PCIe Port correctable error support in AER service driver
Date: Fri, 7 Feb 2025 18:29:29 -0600	[thread overview]
Message-ID: <20250208002941.4135321-6-terry.bowman@amd.com> (raw)
In-Reply-To: <20250208002941.4135321-1-terry.bowman@amd.com>

The AER service driver supports handling Downstream Port Protocol Errors in
Restricted CXL host (RCH) mode also known as CXL1.1. It needs the same
functionality for CXL PCIe Ports operating in Virtual Hierarchy (VH)
mode.[1]

CXL and PCIe Protocol Error handling have different requirements that
necessitate a separate handling path. The AER service driver may try to
recover PCIe uncorrectable non-fatal errors (UCE). The same recovery is not
suitable for CXL PCIe Port devices because of potential for system memory
corruption. Instead, CXL Protocol Error handling must use a kernel panic
in the case of a fatal or non-fatal UCE. The AER driver's PCIe Protocol
Error handling does not panic the kernel in response to a UCE.

Introduce a separate path for CXL Protocol Error handling in the AER
service driver. This will allow CXL Protocol Errors to use CXL specific
handling instead of PCIe handling. Add the CXL specific changes without
affecting or adding functionality in the PCIe handling.

Make this update alongside the existing Downstream Port RCH error handling
logic, extending support to CXL PCIe Ports in VH mode.

Remove is_internal_error(). is_internal_error() was used to determine if
an AER error was a CXL error. Instead, now rely on pcie_is_cxl() to
indicate the error is a CXL error.

The uncorrectable error (UCE) handling will be added in a future patch.

[1] CXL 3.1 Spec, 12.2.2 CXL Root Ports, Downstream Switch Ports, and
Upstream Switch Ports

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
---
 drivers/pci/pcie/aer.c | 47 ++++++++++++++++++++++++++++--------------
 1 file changed, 32 insertions(+), 15 deletions(-)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index f99a1c6fb274..34ec0958afff 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -989,14 +989,6 @@ static bool cxl_error_is_native(struct pci_dev *dev)
 	return (pcie_ports_native || host->native_aer);
 }
 
-static bool is_internal_error(struct aer_err_info *info)
-{
-	if (info->severity == AER_CORRECTABLE)
-		return info->status & PCI_ERR_COR_INTERNAL;
-
-	return info->status & PCI_ERR_UNC_INTN;
-}
-
 static int cxl_rch_handle_error_iter(struct pci_dev *dev, void *data)
 {
 	struct aer_err_info *info = (struct aer_err_info *)data;
@@ -1033,9 +1025,23 @@ static void cxl_handle_error(struct pci_dev *dev, struct aer_err_info *info)
 	 * RCH's downstream port. Check and handle them in the CXL.mem
 	 * device driver.
 	 */
-	if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC &&
-	    is_internal_error(info))
-		pcie_walk_rcec(dev, cxl_rch_handle_error_iter, info);
+	if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC)
+		return pcie_walk_rcec(dev, cxl_rch_handle_error_iter, info);
+
+	if (info->severity == AER_CORRECTABLE) {
+		struct pci_driver *pdrv = dev->driver;
+		int aer = dev->aer_cap;
+
+		if (aer)
+			pci_write_config_dword(dev, aer + PCI_ERR_COR_STATUS,
+					       info->status);
+
+		if (pdrv && pdrv->cxl_err_handler &&
+		    pdrv->cxl_err_handler->cor_error_detected)
+			pdrv->cxl_err_handler->cor_error_detected(dev);
+
+		pcie_clear_device_status(dev);
+	}
 }
 
 static int handles_cxl_error_iter(struct pci_dev *dev, void *data)
@@ -1053,9 +1059,13 @@ static bool handles_cxl_errors(struct pci_dev *dev)
 {
 	bool handles_cxl = false;
 
-	if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC &&
-	    pcie_aer_is_native(dev))
+	if (!pcie_aer_is_native(dev))
+		return false;
+
+	if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC)
 		pcie_walk_rcec(dev, handles_cxl_error_iter, &handles_cxl);
+	else
+		handles_cxl = pcie_is_cxl_port(dev);
 
 	return handles_cxl;
 }
@@ -1073,6 +1083,10 @@ static void cxl_enable_internal_errors(struct pci_dev *dev)
 static inline void cxl_enable_internal_errors(struct pci_dev *dev) { }
 static inline void cxl_handle_error(struct pci_dev *dev,
 				    struct aer_err_info *info) { }
+static bool handles_cxl_errors(struct pci_dev *dev)
+{
+	return false;
+}
 #endif
 
 /**
@@ -1110,8 +1124,11 @@ static void pci_aer_handle_error(struct pci_dev *dev, struct aer_err_info *info)
 
 static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
 {
-	cxl_handle_error(dev, info);
-	pci_aer_handle_error(dev, info);
+	if (handles_cxl_errors(dev))
+		cxl_handle_error(dev, info);
+	else
+		pci_aer_handle_error(dev, info);
+
 	pci_dev_put(dev);
 }
 
-- 
2.34.1


  parent reply	other threads:[~2025-02-08  0:30 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-08  0:29 [PATCH v6 00/17] Enable CXL PCIe port protocol error handling and logging Terry Bowman
2025-02-08  0:29 ` [PATCH v6 01/17] PCI/AER: Introduce 'struct cxl_err_handlers' and add to 'struct pci_driver' Terry Bowman
2025-02-08  0:29 ` [PATCH v6 02/17] PCI/AER: Rename AER driver's interfaces to also indicate CXL PCIe Port support Terry Bowman
2025-02-08  0:29 ` [PATCH v6 03/17] CXL/PCI: Introduce PCIe helper functions pcie_is_cxl() and pcie_is_cxl_port() Terry Bowman
2025-02-08  0:29 ` [PATCH v6 04/17] PCI/AER: Modify AER driver logging to report CXL or PCIe bus error type Terry Bowman
2025-02-08  0:29 ` Terry Bowman [this message]
2025-02-08  0:29 ` [PATCH v6 06/17] PCI/AER: Add CXL PCIe Port uncorrectable error recovery in AER service driver Terry Bowman
2025-02-10 18:43   ` Gregory Price
2025-02-10 20:13   ` Gregory Price
2025-02-08  0:29 ` [PATCH v6 07/17] cxl/pci: Map CXL PCIe Root Port and Downstream Switch Port RAS registers Terry Bowman
2025-02-08  0:29 ` [PATCH v6 08/17] cxl/pci: Map CXL PCIe Upstream " Terry Bowman
2025-02-08  0:29 ` [PATCH v6 09/17] cxl/pci: Update RAS handler interfaces to also support CXL PCIe Ports Terry Bowman
2025-02-10 20:16   ` Gregory Price
2025-02-10 20:36     ` Bowman, Terry
2025-02-08  0:29 ` [PATCH v6 10/17] cxl/pci: Add log message for unmapped registers in existing RAS handlers Terry Bowman
2025-02-08  0:29 ` [PATCH v6 11/17] cxl/pci: Change find_cxl_port() to non-static Terry Bowman
2025-02-08  0:29 ` [PATCH v6 12/17] cxl/pci: Add error handler for CXL PCIe Port RAS errors Terry Bowman
2025-02-08  0:29 ` [PATCH v6 13/17] cxl/pci: Add trace logging " Terry Bowman
2025-02-08  0:29 ` [PATCH v6 14/17] cxl/pci: Update CXL Port RAS logging to also display PCIe SBDF Terry Bowman
2025-02-08  0:29 ` [PATCH v6 15/17] cxl/pci: Add support to assign and clear pci_driver::cxl_err_handlers Terry Bowman
2025-02-08  0:29 ` [PATCH v6 16/17] PCI/AER: Enable internal errors for CXL Upstream and Downstream Switch Ports Terry Bowman
2025-02-08  0:29 ` [PATCH v6 17/17] cxl/pci: Handle CXL Endpoint and RCH protocol errors separately from PCIe errors Terry Bowman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250208002941.4135321-6-terry.bowman@amd.com \
    --to=terry.bowman@amd.com \
    --cc=Benjamin.Cheatham@amd.com \
    --cc=PradeepVineshReddy.Kodamati@amd.com \
    --cc=Smita.KoralahalliChannabasappa@amd.com \
    --cc=alison.schofield@intel.com \
    --cc=bhelgaas@google.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=dave@stgolabs.net \
    --cc=ira.weiny@intel.com \
    --cc=jonathan.cameron@huawei.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=mahesh@linux.ibm.com \
    --cc=ming.li@zohomail.com \
    --cc=nathan.fontenot@amd.com \
    --cc=nifan.cxl@gmail.com \
    --cc=oohall@gmail.com \
    --cc=rrichter@amd.com \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox