* [PATCH] e1000e: Fix error handling in e1000_set_d0_lplu_state_82571
@ 2021-02-28 9:44 Dinghao Liu
2021-03-08 5:43 ` [Intel-wired-lan] " Neftin, Sasha
2021-03-09 7:02 ` Dvora Fuxbrumer
0 siblings, 2 replies; 3+ messages in thread
From: Dinghao Liu @ 2021-02-28 9:44 UTC (permalink / raw)
To: dinghao.liu, kjlu
Cc: Jesse Brandeburg, Tony Nguyen, David S. Miller, Jakub Kicinski,
intel-wired-lan, netdev, linux-kernel
There is one e1e_wphy() call in e1000_set_d0_lplu_state_82571
that we have caught its return value but lack further handling.
Check and terminate the execution flow just like other e1e_wphy()
in this function.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
---
drivers/net/ethernet/intel/e1000e/82571.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index 88faf05e23ba..0b1e890dd583 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -899,6 +899,8 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
} else {
data &= ~IGP02E1000_PM_D0_LPLU;
ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
+ if (ret_val)
+ return ret_val;
/* LPLU and SmartSpeed are mutually exclusive. LPLU is used
* during Dx states where the power conservation is most
* important. During driver activity we should enable
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [Intel-wired-lan] [PATCH] e1000e: Fix error handling in e1000_set_d0_lplu_state_82571
2021-02-28 9:44 [PATCH] e1000e: Fix error handling in e1000_set_d0_lplu_state_82571 Dinghao Liu
@ 2021-03-08 5:43 ` Neftin, Sasha
2021-03-09 7:02 ` Dvora Fuxbrumer
1 sibling, 0 replies; 3+ messages in thread
From: Neftin, Sasha @ 2021-03-08 5:43 UTC (permalink / raw)
To: Dinghao Liu, kjlu
Cc: netdev, linux-kernel, intel-wired-lan, Jakub Kicinski,
David S. Miller
On 2/28/2021 11:44, Dinghao Liu wrote:
> There is one e1e_wphy() call in e1000_set_d0_lplu_state_82571
> that we have caught its return value but lack further handling.
> Check and terminate the execution flow just like other e1e_wphy()
> in this function.
>
> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
> ---
> drivers/net/ethernet/intel/e1000e/82571.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
> index 88faf05e23ba..0b1e890dd583 100644
> --- a/drivers/net/ethernet/intel/e1000e/82571.c
> +++ b/drivers/net/ethernet/intel/e1000e/82571.c
> @@ -899,6 +899,8 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
> } else {
> data &= ~IGP02E1000_PM_D0_LPLU;
> ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
> + if (ret_val)
> + return ret_val;
> /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
> * during Dx states where the power conservation is most
> * important. During driver activity we should enable
>
Good for me.
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [Intel-wired-lan] [PATCH] e1000e: Fix error handling in e1000_set_d0_lplu_state_82571
2021-02-28 9:44 [PATCH] e1000e: Fix error handling in e1000_set_d0_lplu_state_82571 Dinghao Liu
2021-03-08 5:43 ` [Intel-wired-lan] " Neftin, Sasha
@ 2021-03-09 7:02 ` Dvora Fuxbrumer
1 sibling, 0 replies; 3+ messages in thread
From: Dvora Fuxbrumer @ 2021-03-09 7:02 UTC (permalink / raw)
To: Dinghao Liu, kjlu
Cc: netdev, linux-kernel, intel-wired-lan, Jakub Kicinski,
David S. Miller
On 28/02/2021 11:44, Dinghao Liu wrote:
> There is one e1e_wphy() call in e1000_set_d0_lplu_state_82571
> that we have caught its return value but lack further handling.
> Check and terminate the execution flow just like other e1e_wphy()
> in this function.
>
> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
> ---
> drivers/net/ethernet/intel/e1000e/82571.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
> index 88faf05e23ba..0b1e890dd583 100644
> --- a/drivers/net/ethernet/intel/e1000e/82571.c
> +++ b/drivers/net/ethernet/intel/e1000e/82571.c
> @@ -899,6 +899,8 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
> } else {
> data &= ~IGP02E1000_PM_D0_LPLU;
> ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
> + if (ret_val)
> + return ret_val;
> /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
> * during Dx states where the power conservation is most
> * important. During driver activity we should enable
>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-03-09 7:03 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-02-28 9:44 [PATCH] e1000e: Fix error handling in e1000_set_d0_lplu_state_82571 Dinghao Liu
2021-03-08 5:43 ` [Intel-wired-lan] " Neftin, Sasha
2021-03-09 7:02 ` Dvora Fuxbrumer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox