From: Jim Cromie <jim.cromie@gmail.com>
To: Linux kernel <linux-kernel@vger.kernel.org>
Subject: [patch -mm 14/20] chardev: GPIO for SCx200 & PC-8736x: add platform_device for use w dev_dbg
Date: Sat, 17 Jun 2006 12:35:43 -0600 [thread overview]
Message-ID: <44944B7F.8070104@gmail.com> (raw)
In-Reply-To: <cfe85dfa0606121150y369f6beeqc643a1fe5c7ce69b@mail.gmail.com>
14/20. patch.pdev-pc8736x
Adds platform-device to (just introduced) driver, and uses it to
replace many printks with dev_dbg() etc. This could trivially be
merged into previous patch, but this way matches better with the
corresponding patch that does the same change to scx200_gpio.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
diffstat gpio-scx/patch.pdev-pc8736x
pc8736x_gpio.c | 76 +++++++++++++++++++++++++++++++++------------------------
1 files changed, 45 insertions(+), 31 deletions(-)
diff -ruNp -X dontdiff -X exclude-diffs ax-13/drivers/char/pc8736x_gpio.c ax-14/drivers/char/pc8736x_gpio.c
--- ax-13/drivers/char/pc8736x_gpio.c 2006-06-17 01:39:58.000000000 -0600
+++ ax-14/drivers/char/pc8736x_gpio.c 2006-06-17 01:42:57.000000000 -0600
@@ -17,13 +17,14 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/nsc_gpio.h>
+#include <linux/platform_device.h>
#include <asm/uaccess.h>
#include <asm/io.h>
-#define NAME "pc8736x_gpio"
+#define DEVNAME "pc8736x_gpio"
MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>");
-MODULE_DESCRIPTION("NatSemi SCx200 GPIO Pin Driver");
+MODULE_DESCRIPTION("NatSemi PC-8736x GPIO Pin Driver");
MODULE_LICENSE("GPL");
static int major = 0; /* default to dynamic major */
@@ -42,6 +43,8 @@ static unsigned pc8736x_gpio_base;
#define SIO_CF1 0x21 /* chip config, bit0 is chip enable */
+#define PC8736X_GPIO_SIZE 16
+
#define SIO_UNIT_SEL 0x7 /* unit select reg */
#define SIO_UNIT_ACT 0x30 /* unit enable */
#define SIO_GPIO_UNIT 0x7 /* unit number of GPIO */
@@ -69,6 +72,8 @@ static int port_offset[] = { 0, 4, 8, 10
#define PORT_EVT_EN 2
#define PORT_EVT_STST 3
+static struct platform_device *pdev; /* use in dev_*() */
+
static inline void superio_outb(int addr, int val)
{
outb_p(addr, superio_cmd);
@@ -148,9 +153,9 @@ static int pc8736x_gpio_get(unsigned min
val >>= bit;
val &= 1;
- printk(KERN_INFO NAME ": _gpio_get(%d from %x bit %d) == val %d\n",
- minor, pc8736x_gpio_base + port_offset[port] + PORT_IN, bit,
- val);
+ dev_dbg(&pdev->dev, "_gpio_get(%d from %x bit %d) == val %d\n",
+ minor, pc8736x_gpio_base + port_offset[port] + PORT_IN, bit,
+ val);
return val;
}
@@ -164,22 +169,21 @@ static void pc8736x_gpio_set(unsigned mi
bit = minor & 7;
curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);
- printk(KERN_INFO NAME
- ": addr:%x cur:%x bit-pos:%d cur-bit:%x + new:%d -> bit-new:%d\n",
- pc8736x_gpio_base + port_offset[port] + PORT_OUT,
- curval, bit, (curval & ~(1 << bit)), val, (val << bit));
+ dev_dbg(&pdev->dev, "addr:%x cur:%x bit-pos:%d cur-bit:%x + new:%d -> bit-new:%d\n",
+ pc8736x_gpio_base + port_offset[port] + PORT_OUT,
+ curval, bit, (curval & ~(1 << bit)), val, (val << bit));
val = (curval & ~(1 << bit)) | (val << bit);
- printk(KERN_INFO NAME ": gpio_set(minor:%d port:%d bit:%d"
- ") %2x -> %2x\n", minor, port, bit, curval, val);
+ dev_dbg(&pdev->dev, "gpio_set(minor:%d port:%d bit:%d)"
+ " %2x -> %2x\n", minor, port, bit, curval, val);
outb_p(val, pc8736x_gpio_base + port_offset[port] + PORT_OUT);
curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);
val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);
- printk(KERN_INFO NAME ": wrote %x, read: %x\n", curval, val);
+ dev_dbg(&pdev->dev, "wrote %x, read: %x\n", curval, val);
}
static void pc8736x_gpio_set_high(unsigned index)
@@ -194,7 +198,7 @@ static void pc8736x_gpio_set_low(unsigne
static int pc8736x_gpio_current(unsigned index)
{
- printk(KERN_WARNING NAME ": pc8736x_gpio_current unimplemented\n");
+ dev_warn(&pdev->dev, "pc8736x_gpio_current unimplemented\n");
return 0;
}
@@ -222,7 +226,7 @@ static int pc8736x_gpio_open(struct inod
unsigned m = iminor(inode);
file->private_data = &pc8736x_access;
- printk(KERN_NOTICE NAME " open %d\n", m);
+ dev_dbg(&pdev->dev, "open %d\n", m);
if (m > 63)
return -EINVAL;
@@ -230,20 +234,30 @@ static int pc8736x_gpio_open(struct inod
}
static struct file_operations pc8736x_gpio_fops = {
- .owner = THIS_MODULE,
- .open = pc8736x_gpio_open,
- .write = nsc_gpio_write,
- .read = nsc_gpio_read,
+ .owner = THIS_MODULE,
+ .open = pc8736x_gpio_open,
+ .write = nsc_gpio_write,
+ .read = nsc_gpio_read,
};
static int __init pc8736x_gpio_init(void)
{
int r, rc;
- printk(KERN_DEBUG NAME " initializing\n");
+ pdev = platform_device_alloc(DEVNAME, 0);
+ if (!pdev)
+ return -ENOMEM;
+
+ rc = platform_device_add(pdev);
+ if (rc) {
+ platform_device_put(pdev);
+ return -ENODEV;
+ }
+ dev_info(&pdev->dev, "NatSemi pc8736x GPIO Driver Initializing\n");
if (!pc8736x_superio_present()) {
- printk(KERN_ERR NAME ": no device found\n");
+ dev_err(&pdev->dev, "no device found\n");
+ platform_device_put(pdev);
return -ENODEV;
}
@@ -252,31 +266,31 @@ static int __init pc8736x_gpio_init(void
*/
rc = superio_inb(SIO_CF1);
if (!(rc & 0x01)) {
- printk(KERN_ERR NAME ": device not enabled\n");
+ dev_err(&pdev->dev, "device not enabled\n");
return -ENODEV;
}
device_select(SIO_GPIO_UNIT);
if (!superio_inb(SIO_UNIT_ACT)) {
- printk(KERN_ERR NAME ": GPIO unit not enabled\n");
+ dev_err(&pdev->dev, "GPIO unit not enabled\n");
return -ENODEV;
}
- /* read GPIO unit base address */
+ /* read the GPIO unit base addr that chip responds to */
pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8
| superio_inb(SIO_BASE_LADDR));
- if (request_region(pc8736x_gpio_base, 16, NAME))
- printk(KERN_INFO NAME ": GPIO ioport %x reserved\n",
- pc8736x_gpio_base);
+ if (request_region(pc8736x_gpio_base, 16, DEVNAME))
+ dev_info(&pdev->dev, "GPIO ioport %x reserved\n",
+ pc8736x_gpio_base);
- r = register_chrdev(major, NAME, &pc8736x_gpio_fops);
+ r = register_chrdev(major, DEVNAME, &pc8736x_gpio_fops);
if (r < 0) {
- printk(KERN_ERR NAME ": unable to register character device\n");
+ dev_err(&pdev->dev, "unable to register character device\n");
return r;
}
if (!major) {
major = r;
- printk(KERN_DEBUG NAME ": got dynamic major %d\n", major);
+ dev_dbg(&pdev->dev, "got dynamic major %d\n", major);
}
return 0;
@@ -284,11 +298,11 @@ static int __init pc8736x_gpio_init(void
static void __exit pc8736x_gpio_cleanup(void)
{
- printk(KERN_DEBUG NAME " cleanup\n");
+ dev_dbg(&pdev->dev, " cleanup\n");
release_region(pc8736x_gpio_base, 16);
- unregister_chrdev(major, NAME);
+ unregister_chrdev(major, DEVNAME);
}
module_init(pc8736x_gpio_init);
next prev parent reply other threads:[~2006-06-17 18:35 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <448DB57F.2050006@gmail.com>
[not found] ` <cfe85dfa0606121150y369f6beeqc643a1fe5c7ce69b@mail.gmail.com>
2006-06-17 18:23 ` [patch -mm 01/20] chardev: GPIO for SCx200 & PC-8736x: whitespace pre-clean Jim Cromie
2006-06-17 18:24 ` [patch -mm 02/20] chardev: GPIO for SCx200 & PC-8736x: modernize driver init to 2.6 api Jim Cromie
2006-06-20 5:21 ` Andrew Morton
2006-06-17 18:25 ` [patch -mm 03/20] chardev: GPIO for SCx200 & PC-8736x: add platforn_device for use w dev_dbg Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-17 18:26 ` [patch -mm 04/20] chardev: GPIO for SCx200 & PC-8736x: device minor numbers are unsigned ints Jim Cromie
2006-06-17 18:27 ` [patch -mm 05/20] chardev: GPIO for SCx200 & PC-8736x: put gpio_dump on a diet Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-17 18:28 ` [patch -mm 06/20] chardev: GPIO for SCx200 & PC-8736x: add 'v' command to device-file Jim Cromie
2006-06-17 18:29 ` [patch -mm 07/20] chardev: GPIO for SCx200 & PC-8736x: refactor scx200_probe to better segregate _gpio initialization Jim Cromie
2006-06-17 18:30 ` [patch -mm 09/20] chardev: GPIO for SCx200 & PC-8736x: dispatch via vtable Jim Cromie
2006-06-17 18:31 ` [patch -mm 10/20] chardev: GPIO for SCx200 & PC-8736x: add empty common-module Jim Cromie
2006-06-17 18:32 ` [patch -mm 11/20] chardev: GPIO for SCx200 & PC-8736x: migrate file-ops to common module Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-17 18:33 ` [patch -mm 12/20] chardev: GPIO for SCx200 & PC-8736x: migrate gpio_dump " Jim Cromie
2006-06-17 18:33 ` [patch -mm 08/20] chardev: GPIO for SCx200 & PC-8736x: add gpio-ops vtable Jim Cromie
2006-06-17 18:34 ` [patch -mm 13/20] chardev: GPIO for SCx200 & PC-8736x: add new pc8736x_gpio module Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-17 18:35 ` Jim Cromie [this message]
2006-06-20 5:22 ` [patch -mm 14/20] chardev: GPIO for SCx200 & PC-8736x: add platform_device for use w dev_dbg Andrew Morton
2006-06-17 18:36 ` [patch -mm 15/20] chardev: GPIO for SCx200 & PC-8736x: use dev_dbg in common module Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-17 18:37 ` [patch -mm 16/20] chardev: GPIO for SCx200 & PC-8736x: fix gpio_current, use shadow regs Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-17 18:38 ` [patch -mm 17/20] chardev: GPIO for SCx200 & PC-8736x: replace spinlocks w mutexes Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-17 18:39 ` [patch -mm 18/20] chardev: GPIO for SCx200 & PC-8736x: display pin values in/out in gpio_dump Jim Cromie
2006-06-17 18:40 ` [patch -mm 19/20] chardev: GPIO for SCx200 & PC-8736x: add proper Kconfig, Makefile entries Jim Cromie
2006-06-17 18:42 ` [patch -mm 20/20 RFC] chardev: GPIO for SCx200 & PC-8736x: add sysfs-GPIO interface Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-20 19:57 ` Jim Cromie
2006-06-20 20:14 ` Randy.Dunlap
2006-06-20 20:40 ` Jim Cromie
2006-06-20 20:52 ` Randy.Dunlap
2006-06-20 21:50 ` Jim Cromie
2006-06-20 22:52 ` Randy.Dunlap
2006-06-21 0:12 ` Andrew Morton
2006-06-21 3:49 ` Randy.Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44944B7F.8070104@gmail.com \
--to=jim.cromie@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox