The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Jim Cromie <jim.cromie@gmail.com>
To: Linux kernel <linux-kernel@vger.kernel.org>
Subject: [patch -mm 19/20] chardev: GPIO for SCx200 & PC-8736x:  add proper Kconfig, Makefile entries
Date: Sat, 17 Jun 2006 12:40:13 -0600	[thread overview]
Message-ID: <44944C8D.2000600@gmail.com> (raw)
In-Reply-To: <cfe85dfa0606121150y369f6beeqc643a1fe5c7ce69b@mail.gmail.com>

19/20. patch.kconfig

Replace the temp makefile hacks with proper CONFIG entries, which are
also added to Kconfig.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>

---

diffstat gpio-scx/patch.kconfig
 Kconfig  |   23 +++++++++++++++++++++++
 Makefile |    4 +++-
 2 files changed, 26 insertions(+), 1 deletion(-)

diff -ruNp -X dontdiff -X exclude-diffs ax-18/drivers/char/Kconfig ax-19/drivers/char/Kconfig
--- ax-18/drivers/char/Kconfig	2006-06-06 17:15:36.000000000 -0600
+++ ax-19/drivers/char/Kconfig	2006-06-17 01:57:21.000000000 -0600
@@ -934,12 +934,35 @@ config MWAVE
 config SCx200_GPIO
 	tristate "NatSemi SCx200 GPIO Support"
 	depends on SCx200
+	select NSC_GPIO
 	help
 	  Give userspace access to the GPIO pins on the National
 	  Semiconductor SCx200 processors.
 
 	  If compiled as a module, it will be called scx200_gpio.
 
+config PC8736x_GPIO
+	tristate "NatSemi PC8736x GPIO Support"
+	depends on X86
+	default SCx200_GPIO	# mostly N
+	select NSC_GPIO		# needed for support routines
+	help
+	  Give userspace access to the GPIO pins on the National
+	  Semiconductor PC-8736x (x=[03456]) SuperIO chip.  The chip
+	  has multiple functional units, inc several managed by
+	  hwmon/pc87360 driver.  Tested with PC-87366
+
+	  If compiled as a module, it will be called pc8736x_gpio.
+
+config NSC_GPIO
+	tristate "NatSemi Base GPIO Support"
+	# selected by SCx200_GPIO and PC8736x_GPIO
+	# what about 2 selectors differing: m != y
+	help
+	  Common support used (and needed) by scx200_gpio and
+	  pc8736x_gpio drivers.  If those drivers are built as
+	  modules, this one will be too, named nsc_gpio
+
 config CS5535_GPIO
 	tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)"
 	depends on X86_32
diff -ruNp -X dontdiff -X exclude-diffs ax-18/drivers/char/Makefile ax-19/drivers/char/Makefile
--- ax-18/drivers/char/Makefile	2006-06-17 01:39:58.000000000 -0600
+++ ax-19/drivers/char/Makefile	2006-06-17 01:57:21.000000000 -0600
@@ -81,7 +81,9 @@ obj-$(CONFIG_COBALT_LCD)	+= lcd.o
 obj-$(CONFIG_PPDEV)		+= ppdev.o
 obj-$(CONFIG_NWBUTTON)		+= nwbutton.o
 obj-$(CONFIG_NWFLASH)		+= nwflash.o
-obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio.o nsc_gpio.o pc8736x_gpio.o
+obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio.o
+obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
+obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
 obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio.o
 obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
 obj-$(CONFIG_TANBAC_TB0219)	+= tb0219.o



  parent reply	other threads:[~2006-06-17 18:40 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <448DB57F.2050006@gmail.com>
     [not found] ` <cfe85dfa0606121150y369f6beeqc643a1fe5c7ce69b@mail.gmail.com>
2006-06-17 18:23   ` [patch -mm 01/20] chardev: GPIO for SCx200 & PC-8736x: whitespace pre-clean Jim Cromie
2006-06-17 18:24   ` [patch -mm 02/20] chardev: GPIO for SCx200 & PC-8736x: modernize driver init to 2.6 api Jim Cromie
2006-06-20  5:21     ` Andrew Morton
2006-06-17 18:25   ` [patch -mm 03/20] chardev: GPIO for SCx200 & PC-8736x: add platforn_device for use w dev_dbg Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:26   ` [patch -mm 04/20] chardev: GPIO for SCx200 & PC-8736x: device minor numbers are unsigned ints Jim Cromie
2006-06-17 18:27   ` [patch -mm 05/20] chardev: GPIO for SCx200 & PC-8736x: put gpio_dump on a diet Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:28   ` [patch -mm 06/20] chardev: GPIO for SCx200 & PC-8736x: add 'v' command to device-file Jim Cromie
2006-06-17 18:29   ` [patch -mm 07/20] chardev: GPIO for SCx200 & PC-8736x: refactor scx200_probe to better segregate _gpio initialization Jim Cromie
2006-06-17 18:30   ` [patch -mm 09/20] chardev: GPIO for SCx200 & PC-8736x: dispatch via vtable Jim Cromie
2006-06-17 18:31   ` [patch -mm 10/20] chardev: GPIO for SCx200 & PC-8736x: add empty common-module Jim Cromie
2006-06-17 18:32   ` [patch -mm 11/20] chardev: GPIO for SCx200 & PC-8736x: migrate file-ops to common module Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:33   ` [patch -mm 12/20] chardev: GPIO for SCx200 & PC-8736x: migrate gpio_dump " Jim Cromie
2006-06-17 18:33   ` [patch -mm 08/20] chardev: GPIO for SCx200 & PC-8736x: add gpio-ops vtable Jim Cromie
2006-06-17 18:34   ` [patch -mm 13/20] chardev: GPIO for SCx200 & PC-8736x: add new pc8736x_gpio module Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:35   ` [patch -mm 14/20] chardev: GPIO for SCx200 & PC-8736x: add platform_device for use w dev_dbg Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:36   ` [patch -mm 15/20] chardev: GPIO for SCx200 & PC-8736x: use dev_dbg in common module Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:37   ` [patch -mm 16/20] chardev: GPIO for SCx200 & PC-8736x: fix gpio_current, use shadow regs Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:38   ` [patch -mm 17/20] chardev: GPIO for SCx200 & PC-8736x: replace spinlocks w mutexes Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:39   ` [patch -mm 18/20] chardev: GPIO for SCx200 & PC-8736x: display pin values in/out in gpio_dump Jim Cromie
2006-06-17 18:40   ` Jim Cromie [this message]
2006-06-17 18:42   ` [patch -mm 20/20 RFC] chardev: GPIO for SCx200 & PC-8736x: add sysfs-GPIO interface Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-20 19:57       ` Jim Cromie
2006-06-20 20:14         ` Randy.Dunlap
2006-06-20 20:40           ` Jim Cromie
2006-06-20 20:52             ` Randy.Dunlap
2006-06-20 21:50               ` Jim Cromie
2006-06-20 22:52                 ` Randy.Dunlap
2006-06-21  0:12         ` Andrew Morton
2006-06-21  3:49     ` Randy.Dunlap

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=44944C8D.2000600@gmail.com \
    --to=jim.cromie@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox