The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Jim Cromie <jim.cromie@gmail.com>
To: Linux kernel <linux-kernel@vger.kernel.org>
Subject: [patch -mm 16/20] chardev: GPIO for SCx200 & PC-8736x:  fix gpio_current, use shadow regs
Date: Sat, 17 Jun 2006 12:37:04 -0600	[thread overview]
Message-ID: <44944BD0.5050302@gmail.com> (raw)
In-Reply-To: <cfe85dfa0606121150y369f6beeqc643a1fe5c7ce69b@mail.gmail.com>

16/20. patch.shadow-current

Add a working gpio_current() to pc8736x_gpio.c (the previous
implementation just threw a dev_warn), and fix gpio_change() to use
gpio_current() rather than the incorrect (and temporary) gpio_get().
Initialize shadow-regs so this all works.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>

---

diffstat gpio-scx/patch.shadow-current
 pc8736x_gpio.c |   27 +++++++++++++++++++++++----
 1 files changed, 23 insertions(+), 4 deletions(-)

diff -ruNp -X dontdiff -X exclude-diffs ax-15/drivers/char/pc8736x_gpio.c ax-16/drivers/char/pc8736x_gpio.c
--- ax-15/drivers/char/pc8736x_gpio.c	2006-06-17 01:45:49.000000000 -0600
+++ ax-16/drivers/char/pc8736x_gpio.c	2006-06-17 01:48:50.000000000 -0600
@@ -33,6 +33,7 @@ MODULE_PARM_DESC(major, "Major device nu
 
 static DEFINE_SPINLOCK(pc8736x_gpio_config_lock);
 static unsigned pc8736x_gpio_base;
+static u8 pc8736x_gpio_shadow[4];
 
 #define SIO_BASE1       0x2E	/* 1st command-reg to check */
 #define SIO_BASE2       0x4E	/* alt command-reg to check */
@@ -184,6 +185,7 @@ static void pc8736x_gpio_set(unsigned mi
 	val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);
 
 	dev_dbg(&pdev->dev, "wrote %x, read: %x\n", curval, val);
+	pc8736x_gpio_shadow[port] = val;
 }
 
 static void pc8736x_gpio_set_high(unsigned index)
@@ -196,15 +198,18 @@ static void pc8736x_gpio_set_low(unsigne
 	pc8736x_gpio_set(index, 0);
 }
 
-static int pc8736x_gpio_current(unsigned index)
+static int pc8736x_gpio_current(unsigned minor)
 {
-	dev_warn(&pdev->dev, "pc8736x_gpio_current unimplemented\n");
-	return 0;
+	int port, bit;
+	minor &= 0x1f;
+	port = minor >> 3;
+	bit = minor & 7;
+	return pc8736x_gpio_shadow[port] >> bit & 0x01;
 }
 
 static void pc8736x_gpio_change(unsigned index)
 {
-	pc8736x_gpio_set(index, !pc8736x_gpio_get(index));
+	pc8736x_gpio_set(index, !pc8736x_gpio_current(index));
 }
 
 extern void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned iminor);
@@ -240,6 +245,18 @@ static struct file_operations pc8736x_gp
 	.read	= nsc_gpio_read,
 };
 
+static void __init pc8736x_init_shadow(void)
+{
+	int port;
+
+	/* read the current values driven on the GPIO signals */
+	for (port = 0; port < 4; ++port)
+		pc8736x_gpio_shadow[port]
+		    = inb_p(pc8736x_gpio_base + port_offset[port]
+			    + PORT_OUT);
+
+}
+
 static int __init pc8736x_gpio_init(void)
 {
 	int r, rc;
@@ -306,5 +323,7 @@ static void __exit pc8736x_gpio_cleanup(
 	unregister_chrdev(major, DEVNAME);
 }
 
+EXPORT_SYMBOL(pc8736x_access);
+
 module_init(pc8736x_gpio_init);
 module_exit(pc8736x_gpio_cleanup);



  parent reply	other threads:[~2006-06-17 18:37 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <448DB57F.2050006@gmail.com>
     [not found] ` <cfe85dfa0606121150y369f6beeqc643a1fe5c7ce69b@mail.gmail.com>
2006-06-17 18:23   ` [patch -mm 01/20] chardev: GPIO for SCx200 & PC-8736x: whitespace pre-clean Jim Cromie
2006-06-17 18:24   ` [patch -mm 02/20] chardev: GPIO for SCx200 & PC-8736x: modernize driver init to 2.6 api Jim Cromie
2006-06-20  5:21     ` Andrew Morton
2006-06-17 18:25   ` [patch -mm 03/20] chardev: GPIO for SCx200 & PC-8736x: add platforn_device for use w dev_dbg Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:26   ` [patch -mm 04/20] chardev: GPIO for SCx200 & PC-8736x: device minor numbers are unsigned ints Jim Cromie
2006-06-17 18:27   ` [patch -mm 05/20] chardev: GPIO for SCx200 & PC-8736x: put gpio_dump on a diet Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:28   ` [patch -mm 06/20] chardev: GPIO for SCx200 & PC-8736x: add 'v' command to device-file Jim Cromie
2006-06-17 18:29   ` [patch -mm 07/20] chardev: GPIO for SCx200 & PC-8736x: refactor scx200_probe to better segregate _gpio initialization Jim Cromie
2006-06-17 18:30   ` [patch -mm 09/20] chardev: GPIO for SCx200 & PC-8736x: dispatch via vtable Jim Cromie
2006-06-17 18:31   ` [patch -mm 10/20] chardev: GPIO for SCx200 & PC-8736x: add empty common-module Jim Cromie
2006-06-17 18:32   ` [patch -mm 11/20] chardev: GPIO for SCx200 & PC-8736x: migrate file-ops to common module Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:33   ` [patch -mm 12/20] chardev: GPIO for SCx200 & PC-8736x: migrate gpio_dump " Jim Cromie
2006-06-17 18:33   ` [patch -mm 08/20] chardev: GPIO for SCx200 & PC-8736x: add gpio-ops vtable Jim Cromie
2006-06-17 18:34   ` [patch -mm 13/20] chardev: GPIO for SCx200 & PC-8736x: add new pc8736x_gpio module Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:35   ` [patch -mm 14/20] chardev: GPIO for SCx200 & PC-8736x: add platform_device for use w dev_dbg Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:36   ` [patch -mm 15/20] chardev: GPIO for SCx200 & PC-8736x: use dev_dbg in common module Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:37   ` Jim Cromie [this message]
2006-06-20  5:22     ` [patch -mm 16/20] chardev: GPIO for SCx200 & PC-8736x: fix gpio_current, use shadow regs Andrew Morton
2006-06-17 18:38   ` [patch -mm 17/20] chardev: GPIO for SCx200 & PC-8736x: replace spinlocks w mutexes Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-17 18:39   ` [patch -mm 18/20] chardev: GPIO for SCx200 & PC-8736x: display pin values in/out in gpio_dump Jim Cromie
2006-06-17 18:40   ` [patch -mm 19/20] chardev: GPIO for SCx200 & PC-8736x: add proper Kconfig, Makefile entries Jim Cromie
2006-06-17 18:42   ` [patch -mm 20/20 RFC] chardev: GPIO for SCx200 & PC-8736x: add sysfs-GPIO interface Jim Cromie
2006-06-20  5:22     ` Andrew Morton
2006-06-20 19:57       ` Jim Cromie
2006-06-20 20:14         ` Randy.Dunlap
2006-06-20 20:40           ` Jim Cromie
2006-06-20 20:52             ` Randy.Dunlap
2006-06-20 21:50               ` Jim Cromie
2006-06-20 22:52                 ` Randy.Dunlap
2006-06-21  0:12         ` Andrew Morton
2006-06-21  3:49     ` Randy.Dunlap

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=44944BD0.5050302@gmail.com \
    --to=jim.cromie@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox