[PATCH v3 0/3] drm/panel: ilitek-ili9805: convert to *_multi API

[PATCH v3 0/3] drm/panel: ilitek-ili9805: convert to *_multi API

[Michail Tatas]

This series converts panel-ilitek-ili9805 to the
mipi_dsi_*_multi helpers and cleans up the resulting code.

Patch 1: Convert the individual DSI calls to their
*_multi variants

Patch 2: Replace the ILI9805_INSTR table with per
panel init functions using the *_multi API, dropping
struct ili9805_instr

Patch 3: makes ili9805_power_off() and ili9805_deactivate()
return void, since no one checks their return values.

Michail Tatas (3):
  drm/panel: ilitek-ili9805: Use _multi variants
  drm/panel: ilitek-ili9805: Use dsi_multi in init
  drm/panel: ilitek-ili9805: make cleanup funcs void

 drivers/gpu/drm/panel/panel-ilitek-ili9805.c | 211 ++++++++-----------
 1 file changed, 87 insertions(+), 124 deletions(-)

-- 
Changes in v3:
Addresses review feedback from Doug on v2
- Convert hex to lowercase
- Align to match open parenthesis
- Change lines to not cross 100 chars

Changes in v2:
Addresses review feedback from Doug on v1
- Patch 1 remains the same as v1
- Added patch 2 dropping struct ili9805_instr and used
  per-panel init functions
- Added patch 3 making the cleanup functions return void

Revisions
- v1: https://lore.kernel.org/all/allWpYxgHfpKughy@michalis-linux/
- v2: https://lore.kernel.org/all/20260719190358.438699-1-michail.tatas@gmail.com/

The changes are compile tested only. Also I run checkpatch.pl --strict, 
sparse, smatch, gcc W=1, clang W=1 and coccinelle.
2.43.0

[PATCH v3 1/3] drm/panel: ilitek-ili9805: Use _multi variants

[Michail Tatas]

Convert functions mipi_dsi_* to mipi_dsi_*_multi as per the
gpu/todo file.
The multi variant of these functions include improved error
handling.

Signed-off-by: Michail Tatas <michail.tatas@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 drivers/gpu/drm/panel/panel-ilitek-ili9805.c | 51 +++++---------------
 1 file changed, 13 insertions(+), 38 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9805.c b/drivers/gpu/drm/panel/panel-ilitek-ili9805.c
index e6c483851f1f..7e9587afebbe 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9805.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9805.c
@@ -159,36 +159,23 @@ static int ili9805_power_off(struct ili9805 *ctx)
 
 static int ili9805_activate(struct ili9805 *ctx)
 {
-	struct mipi_dsi_device *dsi = ctx->dsi;
-	struct device *dev = &dsi->dev;
-	int i, ret;
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
+	int i;
 
 	for (i = 0; i < ctx->desc->init_length; i++) {
 		const struct ili9805_instr *instr = &ctx->desc->init[i];
 
-		ret = mipi_dsi_dcs_write_buffer(ctx->dsi, instr->data, instr->len);
-		if (ret < 0)
-			return ret;
+		mipi_dsi_dcs_write_buffer_multi(&dsi_ctx, instr->data, instr->len);
 
 		if (instr->delay > 0)
-			msleep(instr->delay);
-	}
-
-	ret = mipi_dsi_dcs_exit_sleep_mode(ctx->dsi);
-	if (ret) {
-		dev_err(dev, "Failed to exit sleep mode (%d)\n", ret);
-		return ret;
+			mipi_dsi_msleep(&dsi_ctx, instr->delay);
 	}
 
-	usleep_range(5000, 6000);
+	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
+	mipi_dsi_usleep_range(&dsi_ctx, 5000, 6000);
+	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
 
-	ret = mipi_dsi_dcs_set_display_on(ctx->dsi);
-	if (ret) {
-		dev_err(dev, "Failed to set display ON (%d)\n", ret);
-		return ret;
-	}
-
-	return 0;
+	return dsi_ctx.accum_err;
 }
 
 static int ili9805_prepare(struct drm_panel *panel)
@@ -211,25 +198,13 @@ static int ili9805_prepare(struct drm_panel *panel)
 
 static int ili9805_deactivate(struct ili9805 *ctx)
 {
-	struct mipi_dsi_device *dsi = ctx->dsi;
-	struct device *dev = &dsi->dev;
-	int ret;
-
-	ret = mipi_dsi_dcs_set_display_off(ctx->dsi);
-	if (ret < 0) {
-		dev_err(dev, "Failed to set display OFF (%d)\n", ret);
-		return ret;
-	}
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
 
-	usleep_range(5000, 10000);
-
-	ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi);
-	if (ret < 0) {
-		dev_err(dev, "Failed to enter sleep mode (%d)\n", ret);
-		return ret;
-	}
+	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
+	mipi_dsi_usleep_range(&dsi_ctx, 5000, 10000);
+	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
 
-	return 0;
+	return dsi_ctx.accum_err;
 }
 
 static int ili9805_unprepare(struct drm_panel *panel)
-- 
2.43.0

[PATCH v3 2/3] drm/panel: ilitek-ili9805: Use dsi_multi in init

[Michail Tatas]

Drop the struct ili9805_instr and the init table
and use init functions.

Signed-off-by: Michail Tatas <michail.tatas@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 drivers/gpu/drm/panel/panel-ilitek-ili9805.c | 160 +++++++++----------
 1 file changed, 76 insertions(+), 84 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9805.c b/drivers/gpu/drm/panel/panel-ilitek-ili9805.c
index 7e9587afebbe..909661f67d26 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9805.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9805.c
@@ -25,22 +25,9 @@
 #define ILI9805_SETEXTC_PARAMETER2		(0x98)
 #define ILI9805_SETEXTC_PARAMETER3		(0x05)
 
-#define ILI9805_INSTR(_delay, ...) { \
-		.delay = (_delay), \
-		.len = sizeof((u8[]) {__VA_ARGS__}), \
-		.data = (u8[]){__VA_ARGS__} \
-	}
-
-struct ili9805_instr {
-	size_t len;
-	const u8 *data;
-	u32 delay;
-};
-
 struct ili9805_desc {
 	const char *name;
-	const struct ili9805_instr *init;
-	const size_t init_length;
+	void (*init)(struct mipi_dsi_multi_context *ctx);
 	const struct drm_display_mode *mode;
 	u32 width_mm;
 	u32 height_mm;
@@ -56,65 +43,80 @@ struct ili9805 {
 	struct gpio_desc	*reset_gpio;
 };
 
-static const struct ili9805_instr gpm1780a0_init[] = {
-	ILI9805_INSTR(100, ILI9805_EXTCMD_CMD_SET_ENABLE_REG, ILI9805_SETEXTC_PARAMETER1,
-		      ILI9805_SETEXTC_PARAMETER2, ILI9805_SETEXTC_PARAMETER3),
-	ILI9805_INSTR(100, 0xFD, 0x0F, 0x10, 0x44, 0x00),
-	ILI9805_INSTR(0, 0xf8, 0x18, 0x02, 0x02, 0x18, 0x02, 0x02, 0x30, 0x00,
-		      0x00, 0x30, 0x00, 0x00, 0x30, 0x00, 0x00),
-	ILI9805_INSTR(0, 0xB8, 0x62),
-	ILI9805_INSTR(0, 0xF1, 0x00),
-	ILI9805_INSTR(0, 0xF2, 0x00, 0x58, 0x40),
-	ILI9805_INSTR(0, 0xF3, 0x60, 0x83, 0x04),
-	ILI9805_INSTR(0, 0xFC, 0x04, 0x0F, 0x01),
-	ILI9805_INSTR(0, 0xEB, 0x08, 0x0F),
-	ILI9805_INSTR(0, 0xe0, 0x00, 0x08, 0x0d, 0x0e, 0x0e, 0x0d, 0x0a, 0x08, 0x04,
-		      0x08, 0x0d, 0x0f, 0x0b, 0x1c, 0x14, 0x0a),
-	ILI9805_INSTR(0, 0xe1, 0x00, 0x08, 0x0d, 0x0e, 0x0e, 0x0d, 0x0a, 0x08, 0x04,
-		      0x08, 0x0d, 0x0f, 0x0b, 0x1c, 0x14, 0x0a),
-	ILI9805_INSTR(10, 0xc1, 0x13, 0x39, 0x19, 0x06),
-	ILI9805_INSTR(10, 0xc7, 0xe5),
-	ILI9805_INSTR(10, 0xB1, 0x00, 0x12, 0x14),
-	ILI9805_INSTR(10, 0xB4, 0x02),
-	ILI9805_INSTR(0, 0xBB, 0x14, 0x55),
-	ILI9805_INSTR(0, MIPI_DCS_SET_ADDRESS_MODE, 0x08),
-	ILI9805_INSTR(0, MIPI_DCS_SET_PIXEL_FORMAT, 0x77),
-	ILI9805_INSTR(0, 0x20),
-	ILI9805_INSTR(0, 0xB0, 0x01),
-	ILI9805_INSTR(0, 0xB6, 0x31, 0x00, 0xef),
-	ILI9805_INSTR(0, 0xDF, 0x23),
-	ILI9805_INSTR(0, 0xB9, 0x02, 0x00),
-};
+static void gpm1780a0_init(struct mipi_dsi_multi_context *ctx)
+{
+	mipi_dsi_dcs_write_seq_multi(ctx, ILI9805_EXTCMD_CMD_SET_ENABLE_REG,
+				     ILI9805_SETEXTC_PARAMETER1, ILI9805_SETEXTC_PARAMETER2,
+				     ILI9805_SETEXTC_PARAMETER3);
+	mipi_dsi_msleep(ctx, 100);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xfd, 0x0f, 0x10, 0x44, 0x00);
+	mipi_dsi_msleep(ctx, 100);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xf8, 0x18, 0x02, 0x02, 0x18, 0x02, 0x02, 0x30, 0x00,
+				     0x00, 0x30, 0x00, 0x00, 0x30, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xb8, 0x62);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xf1, 0x00);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xf2, 0x00, 0x58, 0x40);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xf3, 0x60, 0x83, 0x04);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xfc, 0x04, 0x0f, 0x01);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xeb, 0x08, 0x0f);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xe0, 0x00, 0x08, 0x0d, 0x0e, 0x0e, 0x0d, 0x0a, 0x08,
+				     0x04, 0x08, 0x0d, 0x0f, 0x0b, 0x1c, 0x14, 0x0a);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xe1, 0x00, 0x08, 0x0d, 0x0e, 0x0e, 0x0d, 0x0a, 0x08,
+				     0x04, 0x08, 0x0d, 0x0f, 0x0b, 0x1c, 0x14, 0x0a);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xc1, 0x13, 0x39, 0x19, 0x06);
+	mipi_dsi_msleep(ctx, 10);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xc7, 0xe5);
+	mipi_dsi_msleep(ctx, 10);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xb1, 0x00, 0x12, 0x14);
+	mipi_dsi_msleep(ctx, 10);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xb4, 0x02);
+	mipi_dsi_msleep(ctx, 10);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xbb, 0x14, 0x55);
+	mipi_dsi_dcs_write_seq_multi(ctx, MIPI_DCS_SET_ADDRESS_MODE, 0x08);
+	mipi_dsi_dcs_write_seq_multi(ctx, MIPI_DCS_SET_PIXEL_FORMAT, 0x77);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0x20);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xb0, 0x01);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xb6, 0x31, 0x00, 0xef);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xdf, 0x23);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xb9, 0x02, 0x00);
+}
 
-static const struct ili9805_instr tm041xdhg01_init[] = {
-	ILI9805_INSTR(100, ILI9805_EXTCMD_CMD_SET_ENABLE_REG, ILI9805_SETEXTC_PARAMETER1,
-		      ILI9805_SETEXTC_PARAMETER2, ILI9805_SETEXTC_PARAMETER3),
-	ILI9805_INSTR(100, 0xFD, 0x0F, 0x13, 0x44, 0x00),
-	ILI9805_INSTR(0, 0xf8, 0x18, 0x02, 0x02, 0x18, 0x02, 0x02, 0x30, 0x01,
-		      0x01, 0x30, 0x01, 0x01, 0x30, 0x01, 0x01),
-	ILI9805_INSTR(0, 0xB8, 0x74),
-	ILI9805_INSTR(0, 0xF1, 0x00),
-	ILI9805_INSTR(0, 0xF2, 0x00, 0x58, 0x40),
-	ILI9805_INSTR(0, 0xFC, 0x04, 0x0F, 0x01),
-	ILI9805_INSTR(0, 0xEB, 0x08, 0x0F),
-	ILI9805_INSTR(0, 0xe0, 0x01, 0x0d, 0x15, 0x0e, 0x0f, 0x0f, 0x0b, 0x08, 0x04,
-		      0x07, 0x0a, 0x0d, 0x0c, 0x15, 0x0f, 0x08),
-	ILI9805_INSTR(0, 0xe1, 0x01, 0x0d, 0x15, 0x0e, 0x0f, 0x0f, 0x0b, 0x08, 0x04,
-		      0x07, 0x0a, 0x0d, 0x0c, 0x15, 0x0f, 0x08),
-	ILI9805_INSTR(10, 0xc1, 0x15, 0x03, 0x03, 0x31),
-	ILI9805_INSTR(10, 0xB1, 0x00, 0x12, 0x14),
-	ILI9805_INSTR(10, 0xB4, 0x02),
-	ILI9805_INSTR(0, 0xBB, 0x14, 0x55),
-	ILI9805_INSTR(0, MIPI_DCS_SET_ADDRESS_MODE, 0x0a),
-	ILI9805_INSTR(0, MIPI_DCS_SET_PIXEL_FORMAT, 0x77),
-	ILI9805_INSTR(0, 0x20),
-	ILI9805_INSTR(0, 0xB0, 0x00),
-	ILI9805_INSTR(0, 0xB6, 0x01),
-	ILI9805_INSTR(0, 0xc2, 0x11),
-	ILI9805_INSTR(0, 0x51, 0xFF),
-	ILI9805_INSTR(0, 0x53, 0x24),
-	ILI9805_INSTR(0, 0x55, 0x00),
-};
+static void tm041xdhg01_init(struct mipi_dsi_multi_context *ctx)
+{
+	mipi_dsi_dcs_write_seq_multi(ctx, ILI9805_EXTCMD_CMD_SET_ENABLE_REG,
+				     ILI9805_SETEXTC_PARAMETER1, ILI9805_SETEXTC_PARAMETER2,
+				     ILI9805_SETEXTC_PARAMETER3);
+	mipi_dsi_msleep(ctx, 100);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xfd, 0x0f, 0x13, 0x44, 0x00);
+	mipi_dsi_msleep(ctx, 100);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xf8, 0x18, 0x02, 0x02, 0x18, 0x02, 0x02, 0x30, 0x01,
+				     0x01, 0x30, 0x01, 0x01, 0x30, 0x01, 0x01);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xb8, 0x74);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xf1, 0x00);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xf2, 0x00, 0x58, 0x40);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xfc, 0x04, 0x0f, 0x01);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xeb, 0x08, 0x0f);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xe0, 0x01, 0x0d, 0x15, 0x0e, 0x0f, 0x0f, 0x0b, 0x08,
+				     0x04, 0x07, 0x0a, 0x0d, 0x0c, 0x15, 0x0f, 0x08);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xe1, 0x01, 0x0d, 0x15, 0x0e, 0x0f, 0x0f, 0x0b, 0x08,
+				     0x04, 0x07, 0x0a, 0x0d, 0x0c, 0x15, 0x0f, 0x08);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xc1, 0x15, 0x03, 0x03, 0x31);
+	mipi_dsi_msleep(ctx, 10);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xb1, 0x00, 0x12, 0x14);
+	mipi_dsi_msleep(ctx, 10);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xb4, 0x02);
+	mipi_dsi_msleep(ctx, 10);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xbb, 0x14, 0x55);
+	mipi_dsi_dcs_write_seq_multi(ctx, MIPI_DCS_SET_ADDRESS_MODE, 0x0a);
+	mipi_dsi_dcs_write_seq_multi(ctx, MIPI_DCS_SET_PIXEL_FORMAT, 0x77);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0x20);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xb0, 0x00);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xb6, 0x01);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0xc2, 0x11);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0x51, 0xff);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0x53, 0x24);
+	mipi_dsi_dcs_write_seq_multi(ctx, 0x55, 0x00);
+}
 
 static inline struct ili9805 *panel_to_ili9805(struct drm_panel *panel)
 {
@@ -160,16 +162,8 @@ static int ili9805_power_off(struct ili9805 *ctx)
 static int ili9805_activate(struct ili9805 *ctx)
 {
 	struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
-	int i;
 
-	for (i = 0; i < ctx->desc->init_length; i++) {
-		const struct ili9805_instr *instr = &ctx->desc->init[i];
-
-		mipi_dsi_dcs_write_buffer_multi(&dsi_ctx, instr->data, instr->len);
-
-		if (instr->delay > 0)
-			mipi_dsi_msleep(&dsi_ctx, instr->delay);
-	}
+	ctx->desc->init(&dsi_ctx);
 
 	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
 	mipi_dsi_usleep_range(&dsi_ctx, 5000, 6000);
@@ -246,7 +240,7 @@ static const struct drm_display_mode tm041xdhg01_timing = {
 };
 
 static int ili9805_get_modes(struct drm_panel *panel,
-			      struct drm_connector *connector)
+			     struct drm_connector *connector)
 {
 	struct ili9805 *ctx = panel_to_ili9805(panel);
 	struct drm_display_mode *mode;
@@ -343,7 +337,6 @@ static void ili9805_dsi_remove(struct mipi_dsi_device *dsi)
 
 static const struct ili9805_desc gpm1780a0_desc = {
 	.init = gpm1780a0_init,
-	.init_length = ARRAY_SIZE(gpm1780a0_init),
 	.mode = &gpm1780a0_timing,
 	.width_mm = 65,
 	.height_mm = 65,
@@ -351,7 +344,6 @@ static const struct ili9805_desc gpm1780a0_desc = {
 
 static const struct ili9805_desc tm041xdhg01_desc = {
 	.init = tm041xdhg01_init,
-	.init_length = ARRAY_SIZE(tm041xdhg01_init),
 	.mode = &tm041xdhg01_timing,
 	.width_mm = 42,
 	.height_mm = 96,
-- 
2.43.0

[PATCH v3 3/3] drm/panel: ilitek-ili9805: make cleanup funcs void

[Michail Tatas]

Make cleanup functions return void since no one is checking
their return values

Signed-off-by: Michail Tatas <michail.tatas@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 drivers/gpu/drm/panel/panel-ilitek-ili9805.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9805.c b/drivers/gpu/drm/panel/panel-ilitek-ili9805.c
index 909661f67d26..a8d501be3e9b 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9805.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9805.c
@@ -150,13 +150,11 @@ static int ili9805_power_on(struct ili9805 *ctx)
 	return 0;
 }
 
-static int ili9805_power_off(struct ili9805 *ctx)
+static void ili9805_power_off(struct ili9805 *ctx)
 {
 	gpiod_set_value(ctx->reset_gpio, 0);
 	regulator_disable(ctx->dvdd);
 	regulator_disable(ctx->avdd);
-
-	return 0;
 }
 
 static int ili9805_activate(struct ili9805 *ctx)
@@ -190,15 +188,13 @@ static int ili9805_prepare(struct drm_panel *panel)
 	return 0;
 }
 
-static int ili9805_deactivate(struct ili9805 *ctx)
+static void ili9805_deactivate(struct ili9805 *ctx)
 {
 	struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
 
 	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
 	mipi_dsi_usleep_range(&dsi_ctx, 5000, 10000);
 	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
-
-	return dsi_ctx.accum_err;
 }
 
 static int ili9805_unprepare(struct drm_panel *panel)
-- 
2.43.0

Re: [PATCH v3 0/3] drm/panel: ilitek-ili9805: convert to *_multi API

[Doug Anderson]

Hi,

On Tue, Jul 21, 2026 at 10:27 AM Michail Tatas <michail.tatas@gmail.com> wrote:
>
> This series converts panel-ilitek-ili9805 to the
> mipi_dsi_*_multi helpers and cleans up the resulting code.
>
> Patch 1: Convert the individual DSI calls to their
> *_multi variants
>
> Patch 2: Replace the ILI9805_INSTR table with per
> panel init functions using the *_multi API, dropping
> struct ili9805_instr
>
> Patch 3: makes ili9805_power_off() and ili9805_deactivate()
> return void, since no one checks their return values.
>
> Michail Tatas (3):
>   drm/panel: ilitek-ili9805: Use _multi variants
>   drm/panel: ilitek-ili9805: Use dsi_multi in init
>   drm/panel: ilitek-ili9805: make cleanup funcs void
>
>  drivers/gpu/drm/panel/panel-ilitek-ili9805.c | 211 ++++++++-----------
>  1 file changed, 87 insertions(+), 124 deletions(-)

This looks great now, thanks! Unless there is more feedback on the
lists, I'll plan to apply to drm-misc-next in ~1 week.

-Doug

Re: [PATCH v3 2/3] drm/panel: ilitek-ili9805: Use dsi_multi in init

[Doug Anderson]

Hi,

On Tue, Jul 21, 2026 at 10:27 AM Michail Tatas <michail.tatas@gmail.com> wrote:
>
> +static void gpm1780a0_init(struct mipi_dsi_multi_context *ctx)
> +{
> +       mipi_dsi_dcs_write_seq_multi(ctx, ILI9805_EXTCMD_CMD_SET_ENABLE_REG,
> +                                    ILI9805_SETEXTC_PARAMETER1, ILI9805_SETEXTC_PARAMETER2,
> +                                    ILI9805_SETEXTC_PARAMETER3);
> +       mipi_dsi_msleep(ctx, 100);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xfd, 0x0f, 0x10, 0x44, 0x00);
> +       mipi_dsi_msleep(ctx, 100);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xf8, 0x18, 0x02, 0x02, 0x18, 0x02, 0x02, 0x30, 0x00,
> +                                    0x00, 0x30, 0x00, 0x00, 0x30, 0x00, 0x00);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xb8, 0x62);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xf1, 0x00);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xf2, 0x00, 0x58, 0x40);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xf3, 0x60, 0x83, 0x04);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xfc, 0x04, 0x0f, 0x01);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xeb, 0x08, 0x0f);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xe0, 0x00, 0x08, 0x0d, 0x0e, 0x0e, 0x0d, 0x0a, 0x08,
> +                                    0x04, 0x08, 0x0d, 0x0f, 0x0b, 0x1c, 0x14, 0x0a);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xe1, 0x00, 0x08, 0x0d, 0x0e, 0x0e, 0x0d, 0x0a, 0x08,
> +                                    0x04, 0x08, 0x0d, 0x0f, 0x0b, 0x1c, 0x14, 0x0a);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xc1, 0x13, 0x39, 0x19, 0x06);
> +       mipi_dsi_msleep(ctx, 10);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xc7, 0xe5);
> +       mipi_dsi_msleep(ctx, 10);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xb1, 0x00, 0x12, 0x14);
> +       mipi_dsi_msleep(ctx, 10);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xb4, 0x02);
> +       mipi_dsi_msleep(ctx, 10);
> +       mipi_dsi_dcs_write_seq_multi(ctx, 0xbb, 0x14, 0x55);
> +       mipi_dsi_dcs_write_seq_multi(ctx, MIPI_DCS_SET_ADDRESS_MODE, 0x08);
> +       mipi_dsi_dcs_write_seq_multi(ctx, MIPI_DCS_SET_PIXEL_FORMAT, 0x77);

You've already got my Reviewed-by tag, and I'm planning to merge this
patch as-is. ...but my AI happened to notice that the above line could
be:

mipi_dsi_dcs_set_pixel_format_multi(ctx, 0x77)

...so I figured I'd at least mention it. ;-)

My AI also noticed (yet another) pre-existing issue that the "name"
field of "struct ili9805_desc" isn't used in this driver...

-Doug

Re: [PATCH v3 2/3] drm/panel: ilitek-ili9805: Use dsi_multi in init

[Michail Tatas]

Hello Doug,

> > +       mipi_dsi_dcs_write_seq_multi(ctx, 0xbb, 0x14, 0x55);
> > +       mipi_dsi_dcs_write_seq_multi(ctx, MIPI_DCS_SET_ADDRESS_MODE, 0x08);
> > +       mipi_dsi_dcs_write_seq_multi(ctx, MIPI_DCS_SET_PIXEL_FORMAT, 0x77);
> 
> You've already got my Reviewed-by tag, and I'm planning to merge this
> patch as-is. ...but my AI happened to notice that the above line could
> be:
> 
> mipi_dsi_dcs_set_pixel_format_multi(ctx, 0x77)
> 
> ...so I figured I'd at least mention it. ;-)
> 
> My AI also noticed (yet another) pre-existing issue that the "name"
> field of "struct ili9805_desc" isn't used in this driver...

Hahaha AI's like finding stuff like that, good catch.
I will include these changes in this patch and send a v4.

Regards,
Michail