Netdev List
 help / color / mirror / Atom feed
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: "David S. Miller" <davem@davemloft.net>, netdev@vger.kernel.org
Cc: Nadav Haklai <nadavh@marvell.com>,
	Hanna Hawa <hannah@marvell.com>,
	Yehuda Yitschak <yehuday@marvell.com>,
	Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Gregory Clement <gregory.clement@free-electrons.com>,
	linux-arm-kernel@lists.infradead.org,
	Stefan Chulski <stefanc@marvell.com>,
	Marcin Wojtas <mw@semihalf.com>,
	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Subject: [PATCH v2 09/16] net: mvpp2: adjust mvpp2_{rxq,txq}_init for PPv2.2
Date: Tue, 27 Dec 2016 17:54:30 +0100	[thread overview]
Message-ID: <1482857677-16166-10-git-send-email-thomas.petazzoni@free-electrons.com> (raw)
In-Reply-To: <1482857677-16166-1-git-send-email-thomas.petazzoni@free-electrons.com>

In PPv2.2, the MVPP2_RXQ_DESC_ADDR_REG and MVPP2_TXQ_DESC_ADDR_REG
registers have a slightly different layout, because they need to contain
a 64-bit address for the RX and TX descriptor arrays. This commit
adjusts those functions accordingly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/net/ethernet/marvell/mvpp2.c | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index 23f2368..22f7970 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -102,6 +102,7 @@
 /* Descriptor Manager Top Registers */
 #define MVPP2_RXQ_NUM_REG			0x2040
 #define MVPP2_RXQ_DESC_ADDR_REG			0x2044
+#define     MVPP22_DESC_ADDR_OFFS		8
 #define MVPP2_RXQ_DESC_SIZE_REG			0x2048
 #define     MVPP2_RXQ_DESC_SIZE_MASK		0x3ff0
 #define MVPP2_RXQ_STATUS_UPDATE_REG(rxq)	(0x3000 + 4 * (rxq))
@@ -143,6 +144,7 @@
 #define MVPP2_TXQ_RSVD_CLR_REG			0x20b8
 #define     MVPP2_TXQ_RSVD_CLR_OFFSET		16
 #define MVPP2_AGGR_TXQ_DESC_ADDR_REG(cpu)	(0x2100 + 4 * (cpu))
+#define     MVPP22_AGGR_TXQ_DESC_ADDR_OFFS	8
 #define MVPP2_AGGR_TXQ_DESC_SIZE_REG(cpu)	(0x2140 + 4 * (cpu))
 #define     MVPP2_AGGR_TXQ_DESC_SIZE_MASK	0x3ff0
 #define MVPP2_AGGR_TXQ_STATUS_REG(cpu)		(0x2180 + 4 * (cpu))
@@ -4769,6 +4771,8 @@ static int mvpp2_aggr_txq_init(struct platform_device *pdev,
 			       int desc_num, int cpu,
 			       struct mvpp2 *priv)
 {
+	u32 txq_phys;
+
 	/* Allocate memory for TX descriptors */
 	aggr_txq->descs = dma_alloc_coherent(&pdev->dev,
 				desc_num * MVPP2_DESC_ALIGNED_SIZE,
@@ -4782,10 +4786,16 @@ static int mvpp2_aggr_txq_init(struct platform_device *pdev,
 	aggr_txq->next_desc_to_proc = mvpp2_read(priv,
 						 MVPP2_AGGR_TXQ_INDEX_REG(cpu));
 
-	/* Set Tx descriptors queue starting address */
-	/* indirect access */
-	mvpp2_write(priv, MVPP2_AGGR_TXQ_DESC_ADDR_REG(cpu),
-		    aggr_txq->descs_phys);
+	/* Set Tx descriptors queue starting address indirect
+	 * access
+	 */
+	if (priv->hw_version == MVPP21)
+		txq_phys = aggr_txq->descs_phys;
+	else
+		txq_phys = aggr_txq->descs_phys >>
+			MVPP22_AGGR_TXQ_DESC_ADDR_OFFS;
+
+	mvpp2_write(priv, MVPP2_AGGR_TXQ_DESC_ADDR_REG(cpu), txq_phys);
 	mvpp2_write(priv, MVPP2_AGGR_TXQ_DESC_SIZE_REG(cpu), desc_num);
 
 	return 0;
@@ -4796,6 +4806,8 @@ static int mvpp2_rxq_init(struct mvpp2_port *port,
 			  struct mvpp2_rx_queue *rxq)
 
 {
+	u32 rxq_phys;
+
 	rxq->size = port->rx_ring_size;
 
 	/* Allocate memory for RX descriptors */
@@ -4812,7 +4824,11 @@ static int mvpp2_rxq_init(struct mvpp2_port *port,
 
 	/* Set Rx descriptors queue starting address - indirect access */
 	mvpp2_write(port->priv, MVPP2_RXQ_NUM_REG, rxq->id);
-	mvpp2_write(port->priv, MVPP2_RXQ_DESC_ADDR_REG, rxq->descs_phys);
+	if (port->priv->hw_version == MVPP21)
+		rxq_phys = rxq->descs_phys;
+	else
+		rxq_phys = rxq->descs_phys >> MVPP22_DESC_ADDR_OFFS;
+	mvpp2_write(port->priv, MVPP2_RXQ_DESC_ADDR_REG, rxq_phys);
 	mvpp2_write(port->priv, MVPP2_RXQ_DESC_SIZE_REG, rxq->size);
 	mvpp2_write(port->priv, MVPP2_RXQ_INDEX_REG, 0);
 
-- 
2.7.4

  parent reply	other threads:[~2016-12-27 16:54 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-27 16:54 [PATCH v2 00/16] net: mvpp2: add basic support for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 01/16] dt-bindings: net: update Marvell PPv2 binding for PPv2.2 support Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 02/16] net: mvpp2: add and use accessors for TX/RX descriptors Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 03/16] net: mvpp2: add hw_version field in "struct mvpp2" Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 04/16] net: mvpp2: introduce an intermediate union for the TX/RX descriptors Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 05/16] net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 06/16] net: mvpp2: adjust the allocation/free of BM pools for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 07/16] net: mvpp2: adapt the mvpp2_rxq_*_pool_set functions to PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 08/16] net: mvpp2: adapt mvpp2_defaults_set() " Thomas Petazzoni
2016-12-27 16:54 ` Thomas Petazzoni [this message]
2016-12-27 16:54 ` [PATCH v2 10/16] net: mvpp2: handle register mapping and access for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 11/16] net: mvpp2: handle misc PPv2.1/PPv2.2 differences Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 12/16] net: mvpp2: add AXI bridge initialization for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 13/16] net: mvpp2: rework RXQ interrupt group " Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 14/16] net: mvpp2: adapt rxq distribution to PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 15/16] net: mvpp2: add support for an additional clock needed for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 16/16] net: mvpp2: finally add the PPv2.2 compatible string Thomas Petazzoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1482857677-16166-10-git-send-email-thomas.petazzoni@free-electrons.com \
    --to=thomas.petazzoni@free-electrons.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=gregory.clement@free-electrons.com \
    --cc=hannah@marvell.com \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=mw@semihalf.com \
    --cc=nadavh@marvell.com \
    --cc=netdev@vger.kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=stefanc@marvell.com \
    --cc=yehuday@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox