From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: "David S. Miller" <davem@davemloft.net>, netdev@vger.kernel.org
Cc: Nadav Haklai <nadavh@marvell.com>,
Hanna Hawa <hannah@marvell.com>,
Yehuda Yitschak <yehuday@marvell.com>,
Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Gregory Clement <gregory.clement@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
Stefan Chulski <stefanc@marvell.com>,
Marcin Wojtas <mw@semihalf.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Subject: [PATCH v2 12/16] net: mvpp2: add AXI bridge initialization for PPv2.2
Date: Tue, 27 Dec 2016 17:54:33 +0100 [thread overview]
Message-ID: <1482857677-16166-13-git-send-email-thomas.petazzoni@free-electrons.com> (raw)
In-Reply-To: <1482857677-16166-1-git-send-email-thomas.petazzoni@free-electrons.com>
The PPv2.2 unit is connected to an AXI bus on Armada 7K/8K, so this
commit adds the necessary initialization of the AXI bridge.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
drivers/net/ethernet/marvell/mvpp2.c | 85 ++++++++++++++++++++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index eb55576..d5b197d 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -157,6 +157,34 @@
#define MVPP2_WIN_REMAP(w) (0x4040 + ((w) << 2))
#define MVPP2_BASE_ADDR_ENABLE 0x4060
+/* AXI Bridge Registers */
+#define MVPP22_AXI_BM_WR_ATTR_REG 0x4100
+#define MVPP22_AXI_BM_RD_ATTR_REG 0x4104
+#define MVPP22_AXI_AGGRQ_DESCR_RD_ATTR_REG 0x4110
+#define MVPP22_AXI_TXQ_DESCR_WR_ATTR_REG 0x4114
+#define MVPP22_AXI_TXQ_DESCR_RD_ATTR_REG 0x4118
+#define MVPP22_AXI_RXQ_DESCR_WR_ATTR_REG 0x411c
+#define MVPP22_AXI_RX_DATA_WR_ATTR_REG 0x4120
+#define MVPP22_AXI_TX_DATA_RD_ATTR_REG 0x4130
+#define MVPP22_AXI_RD_NORMAL_CODE_REG 0x4150
+#define MVPP22_AXI_RD_SNOOP_CODE_REG 0x4154
+#define MVPP22_AXI_WR_NORMAL_CODE_REG 0x4160
+#define MVPP22_AXI_WR_SNOOP_CODE_REG 0x4164
+
+/* Values for AXI Bridge registers */
+#define MVPP22_AXI_ATTR_CACHE_OFFS 0
+#define MVPP22_AXI_ATTR_DOMAIN_OFFS 12
+
+#define MVPP22_AXI_CODE_CACHE_OFFS 0
+#define MVPP22_AXI_CODE_DOMAIN_OFFS 4
+
+#define MVPP22_AXI_CODE_CACHE_NON_CACHE 0x3
+#define MVPP22_AXI_CODE_CACHE_WR_CACHE 0x7
+#define MVPP22_AXI_CODE_CACHE_RD_CACHE 0xb
+
+#define MVPP22_AXI_CODE_DOMAIN_OUTER_DOM 2
+#define MVPP22_AXI_CODE_DOMAIN_SYSTEM 3
+
/* Interrupt Cause and Mask registers */
#define MVPP2_ISR_RX_THRESHOLD_REG(rxq) (0x5200 + 4 * (rxq))
#define MVPP2_MAX_ISR_RX_THRESHOLD 0xfffff0
@@ -6640,6 +6668,60 @@ static void mvpp2_rx_fifo_init(struct mvpp2 *priv)
mvpp2_write(priv, MVPP2_RX_FIFO_INIT_REG, 0x1);
}
+static void mvpp2_axi_init(struct mvpp2 *priv)
+{
+ u32 val, rdval, wrval;
+
+ mvpp2_write(priv, MVPP22_BM_ADDR_HIGH_RLS_REG, 0x0);
+
+ /* AXI Bridge Configuration */
+
+ rdval = MVPP22_AXI_CODE_CACHE_RD_CACHE
+ << MVPP22_AXI_ATTR_CACHE_OFFS;
+ rdval |= MVPP22_AXI_CODE_DOMAIN_OUTER_DOM
+ << MVPP22_AXI_ATTR_DOMAIN_OFFS;
+
+ wrval = MVPP22_AXI_CODE_CACHE_WR_CACHE
+ << MVPP22_AXI_ATTR_CACHE_OFFS;
+ wrval |= MVPP22_AXI_CODE_DOMAIN_OUTER_DOM
+ << MVPP22_AXI_ATTR_DOMAIN_OFFS;
+
+ /* BM */
+ mvpp2_write(priv, MVPP22_AXI_BM_WR_ATTR_REG, wrval);
+ mvpp2_write(priv, MVPP22_AXI_BM_RD_ATTR_REG, rdval);
+
+ /* Descriptors */
+ mvpp2_write(priv, MVPP22_AXI_AGGRQ_DESCR_RD_ATTR_REG, rdval);
+ mvpp2_write(priv, MVPP22_AXI_TXQ_DESCR_WR_ATTR_REG, wrval);
+ mvpp2_write(priv, MVPP22_AXI_TXQ_DESCR_RD_ATTR_REG, rdval);
+ mvpp2_write(priv, MVPP22_AXI_RXQ_DESCR_WR_ATTR_REG, wrval);
+
+ /* Buffer Data */
+ mvpp2_write(priv, MVPP22_AXI_TX_DATA_RD_ATTR_REG, rdval);
+ mvpp2_write(priv, MVPP22_AXI_RX_DATA_WR_ATTR_REG, wrval);
+
+ val = MVPP22_AXI_CODE_CACHE_NON_CACHE
+ << MVPP22_AXI_CODE_CACHE_OFFS;
+ val |= MVPP22_AXI_CODE_DOMAIN_SYSTEM
+ << MVPP22_AXI_CODE_DOMAIN_OFFS;
+ mvpp2_write(priv, MVPP22_AXI_RD_NORMAL_CODE_REG, val);
+ mvpp2_write(priv, MVPP22_AXI_WR_NORMAL_CODE_REG, val);
+
+ val = MVPP22_AXI_CODE_CACHE_RD_CACHE
+ << MVPP22_AXI_CODE_CACHE_OFFS;
+ val |= MVPP22_AXI_CODE_DOMAIN_OUTER_DOM
+ << MVPP22_AXI_CODE_DOMAIN_OFFS;
+
+ mvpp2_write(priv, MVPP22_AXI_RD_SNOOP_CODE_REG, val);
+
+ val = MVPP22_AXI_CODE_CACHE_WR_CACHE
+ << MVPP22_AXI_CODE_CACHE_OFFS;
+ val |= MVPP22_AXI_CODE_DOMAIN_OUTER_DOM
+ << MVPP22_AXI_CODE_DOMAIN_OFFS;
+
+ mvpp2_write(priv, MVPP22_AXI_WR_SNOOP_CODE_REG, val);
+}
+
/* Initialize network controller common part HW */
static int mvpp2_init(struct platform_device *pdev, struct mvpp2 *priv)
{
@@ -6659,6 +6741,9 @@ static int mvpp2_init(struct platform_device *pdev, struct mvpp2 *priv)
if (dram_target_info)
mvpp2_conf_mbus_windows(dram_target_info, priv);
+ if (priv->hw_version == MVPP22)
+ mvpp2_axi_init(priv);
+
/* Disable HW PHY polling */
if (priv->hw_version == MVPP21) {
val = readl(priv->lms_base + MVPP2_PHY_AN_CFG0_REG);
--
2.7.4
next prev parent reply other threads:[~2016-12-27 16:54 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-27 16:54 [PATCH v2 00/16] net: mvpp2: add basic support for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 01/16] dt-bindings: net: update Marvell PPv2 binding for PPv2.2 support Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 02/16] net: mvpp2: add and use accessors for TX/RX descriptors Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 03/16] net: mvpp2: add hw_version field in "struct mvpp2" Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 04/16] net: mvpp2: introduce an intermediate union for the TX/RX descriptors Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 05/16] net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 06/16] net: mvpp2: adjust the allocation/free of BM pools for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 07/16] net: mvpp2: adapt the mvpp2_rxq_*_pool_set functions to PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 08/16] net: mvpp2: adapt mvpp2_defaults_set() " Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 09/16] net: mvpp2: adjust mvpp2_{rxq,txq}_init for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 10/16] net: mvpp2: handle register mapping and access " Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 11/16] net: mvpp2: handle misc PPv2.1/PPv2.2 differences Thomas Petazzoni
2016-12-27 16:54 ` Thomas Petazzoni [this message]
2016-12-27 16:54 ` [PATCH v2 13/16] net: mvpp2: rework RXQ interrupt group initialization for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 14/16] net: mvpp2: adapt rxq distribution to PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 15/16] net: mvpp2: add support for an additional clock needed for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 16/16] net: mvpp2: finally add the PPv2.2 compatible string Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1482857677-16166-13-git-send-email-thomas.petazzoni@free-electrons.com \
--to=thomas.petazzoni@free-electrons.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=gregory.clement@free-electrons.com \
--cc=hannah@marvell.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=stefanc@marvell.com \
--cc=yehuday@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox