From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: "David S. Miller" <davem@davemloft.net>, netdev@vger.kernel.org
Cc: Nadav Haklai <nadavh@marvell.com>,
Hanna Hawa <hannah@marvell.com>,
Yehuda Yitschak <yehuday@marvell.com>,
Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Gregory Clement <gregory.clement@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
Stefan Chulski <stefanc@marvell.com>,
Marcin Wojtas <mw@semihalf.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Subject: [PATCH v2 13/16] net: mvpp2: rework RXQ interrupt group initialization for PPv2.2
Date: Tue, 27 Dec 2016 17:54:34 +0100 [thread overview]
Message-ID: <1482857677-16166-14-git-send-email-thomas.petazzoni@free-electrons.com> (raw)
In-Reply-To: <1482857677-16166-1-git-send-email-thomas.petazzoni@free-electrons.com>
This commit adjusts how the MVPP2_ISR_RXQ_GROUP_REG register is
configured, since it changed between PPv2.1 and PPv2.2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
drivers/net/ethernet/marvell/mvpp2.c | 45 ++++++++++++++++++++++++++++++++----
1 file changed, 41 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index d5b197d..baad991 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -188,7 +188,21 @@
/* Interrupt Cause and Mask registers */
#define MVPP2_ISR_RX_THRESHOLD_REG(rxq) (0x5200 + 4 * (rxq))
#define MVPP2_MAX_ISR_RX_THRESHOLD 0xfffff0
-#define MVPP2_ISR_RXQ_GROUP_REG(rxq) (0x5400 + 4 * (rxq))
+#define MVPP21_ISR_RXQ_GROUP_REG(rxq) (0x5400 + 4 * (rxq))
+
+#define MVPP22_ISR_RXQ_GROUP_INDEX_REG 0x5400
+#define MVPP22_ISR_RXQ_GROUP_INDEX_SUBGROUP_MASK 0xf
+#define MVPP22_ISR_RXQ_GROUP_INDEX_GROUP_MASK 0x380
+#define MVPP22_ISR_RXQ_GROUP_INDEX_GROUP_OFFSET 7
+
+#define MVPP22_ISR_RXQ_GROUP_INDEX_SUBGROUP_MASK 0xf
+#define MVPP22_ISR_RXQ_GROUP_INDEX_GROUP_MASK 0x380
+
+#define MVPP22_ISR_RXQ_SUB_GROUP_CONFIG_REG 0x5404
+#define MVPP22_ISR_RXQ_SUB_GROUP_STARTQ_MASK 0x1f
+#define MVPP22_ISR_RXQ_SUB_GROUP_SIZE_MASK 0xf00
+#define MVPP22_ISR_RXQ_SUB_GROUP_SIZE_OFFSET 8
+
#define MVPP2_ISR_ENABLE_REG(port) (0x5420 + 4 * (port))
#define MVPP2_ISR_ENABLE_INTERRUPT(mask) ((mask) & 0xffff)
#define MVPP2_ISR_DISABLE_INTERRUPT(mask) (((mask) << 16) & 0xffff0000)
@@ -6385,7 +6399,18 @@ static int mvpp2_port_init(struct mvpp2_port *port)
}
/* Configure Rx queue group interrupt for this port */
- mvpp2_write(priv, MVPP2_ISR_RXQ_GROUP_REG(port->id), rxq_number);
+ if (priv->hw_version == MVPP21)
+ mvpp2_write(priv, MVPP21_ISR_RXQ_GROUP_REG(port->id),
+ rxq_number);
+ else {
+ u32 val;
+
+ val = (port->id << MVPP22_ISR_RXQ_GROUP_INDEX_GROUP_OFFSET);
+ mvpp2_write(priv, MVPP22_ISR_RXQ_GROUP_INDEX_REG, val);
+
+ val = (rxq_number << MVPP22_ISR_RXQ_SUB_GROUP_SIZE_OFFSET);
+ mvpp2_write(priv, MVPP22_ISR_RXQ_SUB_GROUP_CONFIG_REG, val);
+ }
/* Create Rx descriptor rings */
for (queue = 0; queue < rxq_number; queue++) {
@@ -6775,8 +6800,20 @@ static int mvpp2_init(struct platform_device *pdev, struct mvpp2 *priv)
mvpp2_rx_fifo_init(priv);
/* Reset Rx queue group interrupt configuration */
- for (i = 0; i < MVPP2_MAX_PORTS; i++)
- mvpp2_write(priv, MVPP2_ISR_RXQ_GROUP_REG(i), rxq_number);
+ for (i = 0; i < MVPP2_MAX_PORTS; i++) {
+ if (priv->hw_version == MVPP21)
+ mvpp2_write(priv, MVPP21_ISR_RXQ_GROUP_REG(i),
+ rxq_number);
+ else {
+ u32 val;
+
+ val = (i << MVPP22_ISR_RXQ_GROUP_INDEX_GROUP_OFFSET);
+ mvpp2_write(priv, MVPP22_ISR_RXQ_GROUP_INDEX_REG, val);
+
+ val = (rxq_number << MVPP22_ISR_RXQ_SUB_GROUP_SIZE_OFFSET);
+ mvpp2_write(priv, MVPP22_ISR_RXQ_SUB_GROUP_CONFIG_REG, val);
+ }
+ }
if (priv->hw_version == MVPP21)
writel(MVPP2_EXT_GLOBAL_CTRL_DEFAULT,
--
2.7.4
next prev parent reply other threads:[~2016-12-27 16:54 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-27 16:54 [PATCH v2 00/16] net: mvpp2: add basic support for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 01/16] dt-bindings: net: update Marvell PPv2 binding for PPv2.2 support Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 02/16] net: mvpp2: add and use accessors for TX/RX descriptors Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 03/16] net: mvpp2: add hw_version field in "struct mvpp2" Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 04/16] net: mvpp2: introduce an intermediate union for the TX/RX descriptors Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 05/16] net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 06/16] net: mvpp2: adjust the allocation/free of BM pools for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 07/16] net: mvpp2: adapt the mvpp2_rxq_*_pool_set functions to PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 08/16] net: mvpp2: adapt mvpp2_defaults_set() " Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 09/16] net: mvpp2: adjust mvpp2_{rxq,txq}_init for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 10/16] net: mvpp2: handle register mapping and access " Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 11/16] net: mvpp2: handle misc PPv2.1/PPv2.2 differences Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 12/16] net: mvpp2: add AXI bridge initialization for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` Thomas Petazzoni [this message]
2016-12-27 16:54 ` [PATCH v2 14/16] net: mvpp2: adapt rxq distribution to PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 15/16] net: mvpp2: add support for an additional clock needed for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 16/16] net: mvpp2: finally add the PPv2.2 compatible string Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1482857677-16166-14-git-send-email-thomas.petazzoni@free-electrons.com \
--to=thomas.petazzoni@free-electrons.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=gregory.clement@free-electrons.com \
--cc=hannah@marvell.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=stefanc@marvell.com \
--cc=yehuday@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox