Netdev List
 help / color / mirror / Atom feed
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: "David S. Miller" <davem@davemloft.net>, netdev@vger.kernel.org
Cc: Nadav Haklai <nadavh@marvell.com>,
	Hanna Hawa <hannah@marvell.com>,
	Yehuda Yitschak <yehuday@marvell.com>,
	Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Gregory Clement <gregory.clement@free-electrons.com>,
	linux-arm-kernel@lists.infradead.org,
	Stefan Chulski <stefanc@marvell.com>,
	Marcin Wojtas <mw@semihalf.com>,
	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Subject: [PATCH v2 11/16] net: mvpp2: handle misc PPv2.1/PPv2.2 differences
Date: Tue, 27 Dec 2016 17:54:32 +0100	[thread overview]
Message-ID: <1482857677-16166-12-git-send-email-thomas.petazzoni@free-electrons.com> (raw)
In-Reply-To: <1482857677-16166-1-git-send-email-thomas.petazzoni@free-electrons.com>

This commit handles a few miscellaneous differences between PPv2.1 and
PPv2.2 in different areas, where code done for PPv2.1 doesn't apply for
PPv2.2 or needs to be adjusted (getting the MAC address, disabling PHY
polling, etc.).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/net/ethernet/marvell/mvpp2.c | 31 ++++++++++++++++++++++---------
 1 file changed, 22 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index 389cc62..eb55576 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -304,6 +304,9 @@
 #define      MVPP2_GMAC_TX_FIFO_MIN_TH_MASK(v)	(((v) << 6) & \
 					MVPP2_GMAC_TX_FIFO_MIN_TH_ALL_MASK)
 
+#define MVPP22_SMI_MISC_CFG_REG			0x2a204
+#define      MVPP22_SMI_POLLING_EN		BIT(10)
+
 #define MVPP22_PORT_BASE			0x30e00
 #define MVPP22_PORT_OFFSET			0x1000
 
@@ -5823,7 +5826,7 @@ static int mvpp2_check_ringparam_valid(struct net_device *dev,
 	return 0;
 }
 
-static void mvpp2_get_mac_address(struct mvpp2_port *port, unsigned char *addr)
+static void mvpp21_get_mac_address(struct mvpp2_port *port, unsigned char *addr)
 {
 	u32 mac_addr_l, mac_addr_m, mac_addr_h;
 
@@ -6272,7 +6275,7 @@ static const struct ethtool_ops mvpp2_eth_tool_ops = {
 
 /* Driver initialization */
 
-static void mvpp2_port_power_up(struct mvpp2_port *port)
+static void mvpp21_port_power_up(struct mvpp2_port *port)
 {
 	mvpp2_port_mii_set(port);
 	mvpp2_port_periodic_xon_disable(port);
@@ -6491,7 +6494,8 @@ static int mvpp2_port_probe(struct platform_device *pdev,
 		mac_from = "device tree";
 		ether_addr_copy(dev->dev_addr, dt_mac_addr);
 	} else {
-		mvpp2_get_mac_address(port, hw_mac_addr);
+		if (priv->hw_version == MVPP21)
+			mvpp21_get_mac_address(port, hw_mac_addr);
 		if (is_valid_ether_addr(hw_mac_addr)) {
 			mac_from = "hardware";
 			ether_addr_copy(dev->dev_addr, hw_mac_addr);
@@ -6511,7 +6515,9 @@ static int mvpp2_port_probe(struct platform_device *pdev,
 		dev_err(&pdev->dev, "failed to init port %d\n", id);
 		goto err_free_stats;
 	}
-	mvpp2_port_power_up(port);
+
+	if (priv->hw_version == MVPP21)
+		mvpp21_port_power_up(port);
 
 	port->pcpu = alloc_percpu(struct mvpp2_port_pcpu);
 	if (!port->pcpu) {
@@ -6654,9 +6660,15 @@ static int mvpp2_init(struct platform_device *pdev, struct mvpp2 *priv)
 		mvpp2_conf_mbus_windows(dram_target_info, priv);
 
 	/* Disable HW PHY polling */
-	val = readl(priv->lms_base + MVPP2_PHY_AN_CFG0_REG);
-	val |= MVPP2_PHY_AN_STOP_SMI0_MASK;
-	writel(val, priv->lms_base + MVPP2_PHY_AN_CFG0_REG);
+	if (priv->hw_version == MVPP21) {
+		val = readl(priv->lms_base + MVPP2_PHY_AN_CFG0_REG);
+		val |= MVPP2_PHY_AN_STOP_SMI0_MASK;
+		writel(val, priv->lms_base + MVPP2_PHY_AN_CFG0_REG);
+	} else {
+		val = readl(priv->iface_base + MVPP22_SMI_MISC_CFG_REG);
+		val &= ~MVPP22_SMI_POLLING_EN;
+		writel(val, priv->iface_base + MVPP22_SMI_MISC_CFG_REG);
+	}
 
 	/* Allocate and initialize aggregated TXQs */
 	priv->aggr_txqs = devm_kcalloc(&pdev->dev, num_present_cpus(),
@@ -6681,8 +6693,9 @@ static int mvpp2_init(struct platform_device *pdev, struct mvpp2 *priv)
 	for (i = 0; i < MVPP2_MAX_PORTS; i++)
 		mvpp2_write(priv, MVPP2_ISR_RXQ_GROUP_REG(i), rxq_number);
 
-	writel(MVPP2_EXT_GLOBAL_CTRL_DEFAULT,
-	       priv->lms_base + MVPP2_MNG_EXTENDED_GLOBAL_CTRL_REG);
+	if (priv->hw_version == MVPP21)
+		writel(MVPP2_EXT_GLOBAL_CTRL_DEFAULT,
+		       priv->lms_base + MVPP2_MNG_EXTENDED_GLOBAL_CTRL_REG);
 
 	/* Allow cache snoop when transmiting packets */
 	mvpp2_write(priv, MVPP2_TX_SNOOP_REG, 0x1);
-- 
2.7.4

  parent reply	other threads:[~2016-12-27 16:54 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-27 16:54 [PATCH v2 00/16] net: mvpp2: add basic support for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 01/16] dt-bindings: net: update Marvell PPv2 binding for PPv2.2 support Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 02/16] net: mvpp2: add and use accessors for TX/RX descriptors Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 03/16] net: mvpp2: add hw_version field in "struct mvpp2" Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 04/16] net: mvpp2: introduce an intermediate union for the TX/RX descriptors Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 05/16] net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 06/16] net: mvpp2: adjust the allocation/free of BM pools for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 07/16] net: mvpp2: adapt the mvpp2_rxq_*_pool_set functions to PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 08/16] net: mvpp2: adapt mvpp2_defaults_set() " Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 09/16] net: mvpp2: adjust mvpp2_{rxq,txq}_init for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 10/16] net: mvpp2: handle register mapping and access " Thomas Petazzoni
2016-12-27 16:54 ` Thomas Petazzoni [this message]
2016-12-27 16:54 ` [PATCH v2 12/16] net: mvpp2: add AXI bridge initialization " Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 13/16] net: mvpp2: rework RXQ interrupt group " Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 14/16] net: mvpp2: adapt rxq distribution to PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 15/16] net: mvpp2: add support for an additional clock needed for PPv2.2 Thomas Petazzoni
2016-12-27 16:54 ` [PATCH v2 16/16] net: mvpp2: finally add the PPv2.2 compatible string Thomas Petazzoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1482857677-16166-12-git-send-email-thomas.petazzoni@free-electrons.com \
    --to=thomas.petazzoni@free-electrons.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=gregory.clement@free-electrons.com \
    --cc=hannah@marvell.com \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=mw@semihalf.com \
    --cc=nadavh@marvell.com \
    --cc=netdev@vger.kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=stefanc@marvell.com \
    --cc=yehuday@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox