Netdev List
 help / color / mirror / Atom feed
From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
	edumazet@google.com, andrew+netdev@lunn.ch,
	netdev@vger.kernel.org
Cc: Kohei Enju <kohei@enjuk.jp>,
	anthony.l.nguyen@intel.com, dima.ruinskiy@intel.com,
	kohei.enju@gmail.com, horms@kernel.org,
	Aleksandr Loktionov <aleksandr.loktionov@intel.com>,
	Avigail Dahan <avigailx.dahan@intel.com>
Subject: [PATCH net-next 01/11] igc: prepare for RSS key get/set support
Date: Wed,  1 Jul 2026 14:02:50 -0700	[thread overview]
Message-ID: <20260701210303.1745310-2-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20260701210303.1745310-1-anthony.l.nguyen@intel.com>

From: Kohei Enju <kohei@enjuk.jp>

Store the RSS key inside struct igc_adapter and introduce the
igc_write_rss_key() helper function. This allows the driver to program
the RSSRK registers using a persistent RSS key, instead of using a
stack-local buffer in igc_setup_mrqc().

This is a preparation patch for adding RSS key get/set support in
subsequent changes, and no functional change is intended in this patch.

Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/igc/igc.h         |  3 +++
 drivers/net/ethernet/intel/igc/igc_ethtool.c | 20 ++++++++++++++++++++
 drivers/net/ethernet/intel/igc/igc_main.c    |  8 ++++----
 3 files changed, 27 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h
index 46d625b15f44..17f213cc93e4 100644
--- a/drivers/net/ethernet/intel/igc/igc.h
+++ b/drivers/net/ethernet/intel/igc/igc.h
@@ -30,6 +30,7 @@ void igc_ethtool_set_ops(struct net_device *);
 
 #define MAX_ETYPE_FILTER		8
 #define IGC_RETA_SIZE			128
+#define IGC_RSS_KEY_SIZE		40
 
 /* SDP support */
 #define IGC_N_EXTTS	2
@@ -302,6 +303,7 @@ struct igc_adapter {
 	unsigned int nfc_rule_count;
 
 	u8 rss_indir_tbl[IGC_RETA_SIZE];
+	u8 rss_key[IGC_RSS_KEY_SIZE];
 
 	unsigned long link_check_timeout;
 	struct igc_info ei;
@@ -361,6 +363,7 @@ unsigned int igc_get_max_rss_queues(struct igc_adapter *adapter);
 void igc_set_flag_queue_pairs(struct igc_adapter *adapter,
 			      const u32 max_rss_queues);
 int igc_reinit_queues(struct igc_adapter *adapter);
+void igc_write_rss_key(struct igc_adapter *adapter);
 void igc_write_rss_indir_tbl(struct igc_adapter *adapter);
 bool igc_has_link(struct igc_adapter *adapter);
 void igc_reset(struct igc_adapter *adapter);
diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c
index 0122009bedd0..f01222f12776 100644
--- a/drivers/net/ethernet/intel/igc/igc_ethtool.c
+++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c
@@ -1460,6 +1460,26 @@ static int igc_ethtool_set_rxnfc(struct net_device *dev,
 	}
 }
 
+/**
+ * igc_write_rss_key - Program the RSS key into device registers
+ * @adapter: board private structure
+ *
+ * Write the RSS key stored in adapter->rss_key to the IGC_RSSRK registers.
+ * Each 32-bit chunk of the key is read using get_unaligned_le32() and written
+ * to the appropriate register.
+ */
+void igc_write_rss_key(struct igc_adapter *adapter)
+{
+	struct igc_hw *hw = &adapter->hw;
+	u32 val;
+	int i;
+
+	for (i = 0; i < IGC_RSS_KEY_SIZE / 4; i++) {
+		val = get_unaligned_le32(&adapter->rss_key[i * 4]);
+		wr32(IGC_RSSRK(i), val);
+	}
+}
+
 void igc_write_rss_indir_tbl(struct igc_adapter *adapter)
 {
 	struct igc_hw *hw = &adapter->hw;
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 2c9e2dfd8499..5ef229a5931f 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -785,11 +785,8 @@ static void igc_setup_mrqc(struct igc_adapter *adapter)
 	struct igc_hw *hw = &adapter->hw;
 	u32 j, num_rx_queues;
 	u32 mrqc, rxcsum;
-	u32 rss_key[10];
 
-	netdev_rss_key_fill(rss_key, sizeof(rss_key));
-	for (j = 0; j < 10; j++)
-		wr32(IGC_RSSRK(j), rss_key[j]);
+	igc_write_rss_key(adapter);
 
 	num_rx_queues = adapter->rss_queues;
 
@@ -5048,6 +5045,9 @@ static int igc_sw_init(struct igc_adapter *adapter)
 
 	pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
 
+	/* init RSS key */
+	netdev_rss_key_fill(adapter->rss_key, sizeof(adapter->rss_key));
+
 	/* set default ring sizes */
 	adapter->tx_ring_count = IGC_DEFAULT_TXD;
 	adapter->rx_ring_count = IGC_DEFAULT_RXD;
-- 
2.47.1


  reply	other threads:[~2026-07-01 21:03 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-01 21:02 [PATCH net-next 00/11][pull request] Intel Wired LAN Driver Updates 2026-07-01 (igc, igb) Tony Nguyen
2026-07-01 21:02 ` Tony Nguyen [this message]
2026-07-01 21:02 ` [PATCH net-next 02/11] igc: expose RSS key via ethtool get_rxfh Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 03/11] igc: allow configuring RSS key via ethtool set_rxfh Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 04/11] igb: prepare for RSS key get/set support Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 05/11] igb: expose RSS key via ethtool get_rxfh Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 06/11] igb: allow configuring RSS key via ethtool set_rxfh Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 07/11] igb: set skb hash type from RSS_TYPE Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 08/11] igc: remove unused autoneg_failed field Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 09/11] igc: move autoneg-enabled settings into igc_handle_autoneg_enabled() Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 10/11] igc: replace goto out with direct returns in igc_config_fc_after_link_up() Tony Nguyen
2026-07-01 21:03 ` [PATCH net-next 11/11] igc: add support for forcing link speed without autonegotiation Tony Nguyen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260701210303.1745310-2-anthony.l.nguyen@intel.com \
    --to=anthony.l.nguyen@intel.com \
    --cc=aleksandr.loktionov@intel.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=avigailx.dahan@intel.com \
    --cc=davem@davemloft.net \
    --cc=dima.ruinskiy@intel.com \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=kohei.enju@gmail.com \
    --cc=kohei@enjuk.jp \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox