From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
edumazet@google.com, andrew+netdev@lunn.ch,
netdev@vger.kernel.org
Cc: Kohei Enju <kohei@enjuk.jp>,
anthony.l.nguyen@intel.com, kohei.enju@gmail.com,
horms@kernel.org,
Aleksandr Loktionov <aleksandr.loktionov@intel.com>,
Paul Menzel <pmenzel@molgen.mpg.de>
Subject: [PATCH net-next 07/11] igb: set skb hash type from RSS_TYPE
Date: Wed, 1 Jul 2026 14:02:56 -0700 [thread overview]
Message-ID: <20260701210303.1745310-8-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20260701210303.1745310-1-anthony.l.nguyen@intel.com>
From: Kohei Enju <kohei@enjuk.jp>
igb always marks the RX hash as L3 regardless of RSS_TYPE in the
advanced descriptor, which may indicate L4 (TCP/UDP) hash. This can
trigger unnecessary SW hash recalculation and breaks toeplitz selftests.
Use RSS_TYPE from pkt_info to set the correct PKT_HASH_TYPE_*
Tested by toeplitz.py with the igb RSS key get/set patches applied as
they are required for toeplitz.py (see Link below).
# ethtool -N $DEV rx-flow-hash udp4 sdfn
# ethtool -N $DEV rx-flow-hash udp6 sdfn
# python toeplitz.py | grep -E "^# Totals"
Without patch:
# Totals: pass:0 fail:12 xfail:0 xpass:0 skip:0 error:0
With patch:
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lore.kernel.org/intel-wired-lan/20260119084511.95287-5-takkozu@amazon.com/
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
drivers/net/ethernet/intel/igb/e1000_82575.h | 21 ++++++++++++++++++++
drivers/net/ethernet/intel/igb/igb_main.c | 17 ++++++++++++----
2 files changed, 34 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h
index 63ec253ac788..9e696d55e512 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.h
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.h
@@ -87,6 +87,27 @@ union e1000_adv_rx_desc {
} wb; /* writeback */
};
+#define E1000_RSS_TYPE_NO_HASH 0
+#define E1000_RSS_TYPE_HASH_TCP_IPV4 1
+#define E1000_RSS_TYPE_HASH_IPV4 2
+#define E1000_RSS_TYPE_HASH_TCP_IPV6 3
+#define E1000_RSS_TYPE_HASH_IPV6_EX 4
+#define E1000_RSS_TYPE_HASH_IPV6 5
+#define E1000_RSS_TYPE_HASH_TCP_IPV6_EX 6
+#define E1000_RSS_TYPE_HASH_UDP_IPV4 7
+#define E1000_RSS_TYPE_HASH_UDP_IPV6 8
+#define E1000_RSS_TYPE_HASH_UDP_IPV6_EX 9
+
+#define E1000_RSS_TYPE_MASK GENMASK(3, 0)
+
+#define E1000_RSS_L4_TYPES_MASK \
+ (BIT(E1000_RSS_TYPE_HASH_TCP_IPV4) | \
+ BIT(E1000_RSS_TYPE_HASH_TCP_IPV6) | \
+ BIT(E1000_RSS_TYPE_HASH_TCP_IPV6_EX) | \
+ BIT(E1000_RSS_TYPE_HASH_UDP_IPV4) | \
+ BIT(E1000_RSS_TYPE_HASH_UDP_IPV6) | \
+ BIT(E1000_RSS_TYPE_HASH_UDP_IPV6_EX))
+
#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
#define E1000_RXDADV_STAT_TS 0x10000 /* Pkt was time stamped */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index b7d36dd0b8e4..d4a897a8c82c 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -8820,10 +8820,19 @@ static inline void igb_rx_hash(struct igb_ring *ring,
union e1000_adv_rx_desc *rx_desc,
struct sk_buff *skb)
{
- if (ring->netdev->features & NETIF_F_RXHASH)
- skb_set_hash(skb,
- le32_to_cpu(rx_desc->wb.lower.hi_dword.rss),
- PKT_HASH_TYPE_L3);
+ u16 rss_type;
+
+ if (!(ring->netdev->features & NETIF_F_RXHASH))
+ return;
+
+ rss_type = le16_to_cpu(rx_desc->wb.lower.lo_dword.pkt_info) &
+ E1000_RSS_TYPE_MASK;
+ if (!rss_type)
+ return;
+
+ skb_set_hash(skb, le32_to_cpu(rx_desc->wb.lower.hi_dword.rss),
+ (E1000_RSS_L4_TYPES_MASK & BIT(rss_type)) ?
+ PKT_HASH_TYPE_L4 : PKT_HASH_TYPE_L3);
}
/**
--
2.47.1
next prev parent reply other threads:[~2026-07-01 21:03 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-01 21:02 [PATCH net-next 00/11][pull request] Intel Wired LAN Driver Updates 2026-07-01 (igc, igb) Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 01/11] igc: prepare for RSS key get/set support Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 02/11] igc: expose RSS key via ethtool get_rxfh Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 03/11] igc: allow configuring RSS key via ethtool set_rxfh Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 04/11] igb: prepare for RSS key get/set support Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 05/11] igb: expose RSS key via ethtool get_rxfh Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 06/11] igb: allow configuring RSS key via ethtool set_rxfh Tony Nguyen
2026-07-01 21:02 ` Tony Nguyen [this message]
2026-07-01 21:02 ` [PATCH net-next 08/11] igc: remove unused autoneg_failed field Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 09/11] igc: move autoneg-enabled settings into igc_handle_autoneg_enabled() Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 10/11] igc: replace goto out with direct returns in igc_config_fc_after_link_up() Tony Nguyen
2026-07-01 21:03 ` [PATCH net-next 11/11] igc: add support for forcing link speed without autonegotiation Tony Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260701210303.1745310-8-anthony.l.nguyen@intel.com \
--to=anthony.l.nguyen@intel.com \
--cc=aleksandr.loktionov@intel.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kohei.enju@gmail.com \
--cc=kohei@enjuk.jp \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pmenzel@molgen.mpg.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox