Netdev List
 help / color / mirror / Atom feed
From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
	edumazet@google.com, andrew+netdev@lunn.ch,
	netdev@vger.kernel.org
Cc: Takashi Kozu <takkozu@amazon.com>,
	anthony.l.nguyen@intel.com, horms@kernel.org, enjuk@amazon.com,
	kohei.enju@gmail.com,
	Piotr Kwapulinski <piotr.kwapulinski@intel.com>,
	Aleksandr Loktionov <aleksandr.loktionov@intel.com>,
	Rinitha S <sx.rinitha@intel.com>
Subject: [PATCH net-next 04/11] igb: prepare for RSS key get/set support
Date: Wed,  1 Jul 2026 14:02:53 -0700	[thread overview]
Message-ID: <20260701210303.1745310-5-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20260701210303.1745310-1-anthony.l.nguyen@intel.com>

From: Takashi Kozu <takkozu@amazon.com>

Store the RSS key inside struct igb_adapter and introduce the
igb_write_rss_key() helper function. This allows the driver to program
the E1000 registers using a persistent RSS key, instead of using a
stack-local buffer in igb_setup_mrqc().

Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Takashi Kozu <takkozu@amazon.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/igb/igb.h         |  3 +++
 drivers/net/ethernet/intel/igb/igb_ethtool.c | 21 ++++++++++++++++++++
 drivers/net/ethernet/intel/igb/igb_main.c    |  8 ++++----
 3 files changed, 28 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index 0fff1df81b7b..8c9b02058cec 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -495,6 +495,7 @@ struct hwmon_buff {
 #define IGB_N_PEROUT	2
 #define IGB_N_SDP	4
 #define IGB_RETA_SIZE	128
+#define IGB_RSS_KEY_SIZE	40
 
 enum igb_filter_match_flags {
 	IGB_FILTER_FLAG_ETHER_TYPE = 0x1,
@@ -655,6 +656,7 @@ struct igb_adapter {
 	struct i2c_client *i2c_client;
 	u32 rss_indir_tbl_init;
 	u8 rss_indir_tbl[IGB_RETA_SIZE];
+	u8 rss_key[IGB_RSS_KEY_SIZE];
 
 	unsigned long link_check_timeout;
 	int copper_tries;
@@ -735,6 +737,7 @@ void igb_down(struct igb_adapter *);
 void igb_reinit_locked(struct igb_adapter *);
 void igb_reset(struct igb_adapter *);
 int igb_reinit_queues(struct igb_adapter *);
+void igb_write_rss_key(struct igb_adapter *adapter);
 void igb_write_rss_indir_tbl(struct igb_adapter *);
 int igb_set_spd_dplx(struct igb_adapter *, u32, u8);
 int igb_setup_tx_resources(struct igb_ring *);
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index f7938c1da835..9a105e59f432 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -3019,6 +3019,27 @@ static int igb_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
 	return ret;
 }
 
+/**
+ * igb_write_rss_key - Program the RSS key into device registers
+ * @adapter: board private structure
+ *
+ * Write the RSS key stored in adapter->rss_key to the E1000 hardware registers.
+ * Each 32-bit chunk of the key is read using get_unaligned_le32() and written
+ * to the appropriate register.
+ */
+void igb_write_rss_key(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	ASSERT_RTNL();
+
+	for (int i = 0; i < IGB_RSS_KEY_SIZE / 4; i++) {
+		u32 val = get_unaligned_le32(&adapter->rss_key[i * 4]);
+
+		wr32(E1000_RSSRK(i), val);
+	}
+}
+
 static int igb_get_eee(struct net_device *netdev, struct ethtool_keee *edata)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index a1e89a375744..b7d36dd0b8e4 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4048,6 +4048,9 @@ static int igb_sw_init(struct igb_adapter *adapter)
 
 	pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
 
+	/* init RSS key */
+	netdev_rss_key_fill(adapter->rss_key, sizeof(adapter->rss_key));
+
 	/* set default ring sizes */
 	adapter->tx_ring_count = IGB_DEFAULT_TXD;
 	adapter->rx_ring_count = IGB_DEFAULT_RXD;
@@ -4522,11 +4525,8 @@ static void igb_setup_mrqc(struct igb_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 mrqc, rxcsum;
 	u32 j, num_rx_queues;
-	u32 rss_key[10];
 
-	netdev_rss_key_fill(rss_key, sizeof(rss_key));
-	for (j = 0; j < 10; j++)
-		wr32(E1000_RSSRK(j), rss_key[j]);
+	igb_write_rss_key(adapter);
 
 	num_rx_queues = adapter->rss_queues;
 
-- 
2.47.1


  parent reply	other threads:[~2026-07-01 21:03 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-01 21:02 [PATCH net-next 00/11][pull request] Intel Wired LAN Driver Updates 2026-07-01 (igc, igb) Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 01/11] igc: prepare for RSS key get/set support Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 02/11] igc: expose RSS key via ethtool get_rxfh Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 03/11] igc: allow configuring RSS key via ethtool set_rxfh Tony Nguyen
2026-07-01 21:02 ` Tony Nguyen [this message]
2026-07-01 21:02 ` [PATCH net-next 05/11] igb: expose RSS key via ethtool get_rxfh Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 06/11] igb: allow configuring RSS key via ethtool set_rxfh Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 07/11] igb: set skb hash type from RSS_TYPE Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 08/11] igc: remove unused autoneg_failed field Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 09/11] igc: move autoneg-enabled settings into igc_handle_autoneg_enabled() Tony Nguyen
2026-07-01 21:02 ` [PATCH net-next 10/11] igc: replace goto out with direct returns in igc_config_fc_after_link_up() Tony Nguyen
2026-07-01 21:03 ` [PATCH net-next 11/11] igc: add support for forcing link speed without autonegotiation Tony Nguyen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260701210303.1745310-5-anthony.l.nguyen@intel.com \
    --to=anthony.l.nguyen@intel.com \
    --cc=aleksandr.loktionov@intel.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=enjuk@amazon.com \
    --cc=horms@kernel.org \
    --cc=kohei.enju@gmail.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=piotr.kwapulinski@intel.com \
    --cc=sx.rinitha@intel.com \
    --cc=takkozu@amazon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox