Netdev List
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
	kernel@pengutronix.de, Fan Wu <fanwu01@zju.edu.cn>,
	stable@vger.kernel.org, Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH net-next 33/37] can: kvaser_pciefd: fix use-after-free in bec poll timer
Date: Fri,  9 Oct 2026 15:28:05 +0200	[thread overview]
Message-ID: <20261009134323.64064-34-mkl@pengutronix.de> (raw)
In-Reply-To: <20261009134323.64064-1-mkl@pengutronix.de>

From: Fan Wu <fanwu01@zju.edu.cn>

The bec poll timer is rearmed from the interrupt handler, so the
timer_delete() call in kvaser_pciefd_remove() neither waits for a
callback that is already running nor stops the handler from rearming
the timer until the interrupt is freed later in the same function.
The timer can therefore still be pending or running when free_candev()
frees the CAN device, causing a use-after-free in
kvaser_pciefd_bec_poll_timer().

Use timer_shutdown_sync() instead, which waits for a running callback
and makes a later rearm a no-op.  Also drain the timer in
kvaser_pciefd_teardown_can_ctrls(), which frees the CAN devices on the
probe error paths.

This issue was found by an in-house static analysis tool.

Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260818063832.383829-1-fanwu01@zju.edu.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/kvaser_pciefd/kvaser_pciefd_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/kvaser_pciefd/kvaser_pciefd_core.c b/drivers/net/can/kvaser_pciefd/kvaser_pciefd_core.c
index d8c9bfb20230..a0597db72086 100644
--- a/drivers/net/can/kvaser_pciefd/kvaser_pciefd_core.c
+++ b/drivers/net/can/kvaser_pciefd/kvaser_pciefd_core.c
@@ -1739,6 +1739,7 @@ static void kvaser_pciefd_teardown_can_ctrls(struct kvaser_pciefd *pcie)
 			iowrite32(0, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG);
 			kvaser_pciefd_pwm_stop(can);
 			kvaser_pciefd_devlink_port_unregister(can);
+			timer_shutdown_sync(&can->bec_poll_timer);
 			free_candev(can->can.dev);
 		}
 	}
@@ -1879,7 +1880,7 @@ static void kvaser_pciefd_remove(struct pci_dev *pdev)
 		struct kvaser_pciefd_can *can = pcie->can[i];
 
 		unregister_candev(can->can.dev);
-		timer_delete(&can->bec_poll_timer);
+		timer_shutdown_sync(&can->bec_poll_timer);
 		kvaser_pciefd_pwm_stop(can);
 		kvaser_pciefd_devlink_port_unregister(can);
 	}
-- 
2.53.0


  parent reply	other threads:[~2026-10-09 13:43 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-09 13:27 [PATCH net-next 0/37] pull-request: can-next 2026-10-09 Marc Kleine-Budde
2026-10-09 13:27 ` [PATCH net-next 01/37] can: dev: can_dropped_invalid_skb: drop CAN XL frames on non-CAN XL devices Marc Kleine-Budde
2026-10-09 13:27 ` [PATCH net-next 02/37] can: raw: remove redundant NULL check before netdev_hold() Marc Kleine-Budde
2026-10-09 13:27 ` [PATCH net-next 03/37] can: convert unreliable ARPHRD_CAN type checks to robust can_get_ml_priv() Marc Kleine-Budde
2026-10-10 14:02   ` netdev-bot+sashiko
2026-10-09 13:27 ` [PATCH net-next 04/37] can: proc: reset pkg_stats atomics individually Marc Kleine-Budde
2026-10-09 13:27 ` [PATCH net-next 05/37] can: proc: remove pointers from CAN specific proc output Marc Kleine-Budde
2026-10-10 14:02   ` netdev-bot+sashiko
2026-10-09 13:27 ` [PATCH net-next 06/37] can: j1939: cancel pending address claim timers from j1939_ecu_unmap_all() Marc Kleine-Budde
2026-10-10 14:02   ` netdev-bot+sashiko
2026-10-09 13:27 ` [PATCH net-next 07/37] can: isotp: check the frame type, not just the length Marc Kleine-Budde
2026-10-09 13:27 ` [PATCH net-next 08/37] dt-bindings: can: renesas,rcar-canfd: Document RZ/G3S SoC Marc Kleine-Budde
2026-10-09 13:27 ` [PATCH net-next 09/37] can: rcar_canfd: Fix typos in macro names Marc Kleine-Budde
2026-10-09 13:27 ` [PATCH net-next 10/37] can: skb: make echo skb freeing safe in any IRQ context Marc Kleine-Budde
2026-10-10 14:02   ` netdev-bot+sashiko
2026-10-09 13:27 ` [PATCH net-next 11/37] can: rcar_canfd: Allow the CAN FD clock to be sourced from fck Marc Kleine-Budde
2026-10-10 14:02   ` netdev-bot+sashiko
2026-10-09 13:27 ` [PATCH net-next 12/37] can: skb: make CAN skb allocation failure paths IRQ-safe Marc Kleine-Budde
2026-10-09 13:27 ` [PATCH net-next 13/37] can: rcar_canfd: Do not set registers selecting the CAN mode Marc Kleine-Budde
2026-10-10 14:02   ` netdev-bot+sashiko
2026-10-09 13:27 ` [PATCH net-next 14/37] can: dev: can_put_echo_skb(): free skb on invalid echo index Marc Kleine-Budde
2026-10-09 13:27 ` [PATCH net-next 15/37] can: rcar_canfd: Add support for Renesas RZ/G3S Marc Kleine-Budde
2026-10-10 14:02   ` netdev-bot+sashiko
2026-10-09 13:27 ` [PATCH net-next 16/37] dt-bindings: can: renesas,rcar-canfd: Document RZ/G3L SoC Marc Kleine-Budde
2026-10-10 14:02   ` netdev-bot+sashiko
2026-10-09 13:27 ` [PATCH net-next 17/37] can: rcar_canfd: Derive max_channels from the device tree Marc Kleine-Budde
2026-10-10 14:02   ` netdev-bot+sashiko
2026-10-09 13:27 ` [PATCH net-next 18/37] dt-bindings: net: can: convert grcan to DT schema Marc Kleine-Budde
2026-10-10 14:02   ` netdev-bot+sashiko
2026-10-09 13:27 ` [PATCH net-next 19/37] can: rcar_canfd: Add support for Renesas RZ/G3L Marc Kleine-Budde
2026-10-10 14:02   ` netdev-bot+sashiko
2026-10-09 13:27 ` [PATCH net-next 20/37] dt-bindings: can: renesas,rcar-canfd: Restrict resets in top-level Marc Kleine-Budde
2026-10-10 14:03   ` netdev-bot+sashiko
2026-10-09 13:27 ` [PATCH net-next 21/37] can: grcan: update the binding file reference in the driver comment Marc Kleine-Budde
2026-10-09 13:27 ` [PATCH net-next 22/37] can: remove Softing CANcard driver Marc Kleine-Budde
2026-10-09 13:27 ` [PATCH net-next 23/37] can: Convert to DEFINE_SIMPLE_DEV_PM_OPS() Marc Kleine-Budde
2026-10-09 13:27 ` [PATCH net-next 24/37] can: cc770: don't discard the IRQ lookup error in probe Marc Kleine-Budde
2026-10-10 14:03   ` netdev-bot+sashiko
2026-10-09 13:27 ` [PATCH net-next 25/37] can: cc770: fix the clock divider check on the platform bus Marc Kleine-Budde
2026-10-09 13:27 ` [PATCH net-next 26/37] can: ems_usb: use usb_kill_urb() to stop the intr URB Marc Kleine-Budde
2026-10-10 14:03   ` netdev-bot+sashiko
2026-10-09 13:27 ` [PATCH net-next 27/37] can: esd: acc_start_xmit(): do not touch skb after can_put_echo_skb() Marc Kleine-Budde
2026-10-10 14:03   ` netdev-bot+sashiko
2026-10-09 13:28 ` [PATCH net-next 28/37] can: flexcan: flexcan_setup_stop_mode_gpr: fix OF node reference leak Marc Kleine-Budde
2026-10-09 13:28 ` [PATCH net-next 29/37] can: f81604: f81604_close(): fix use-after-free on disconnect Marc Kleine-Budde
2026-10-10 14:03   ` netdev-bot+sashiko
2026-10-09 13:28 ` [PATCH net-next 30/37] can: hi311x: drop hi3110_lock before free_irq() on open failure Marc Kleine-Budde
2026-10-10 14:03   ` netdev-bot+sashiko
2026-10-09 13:28 ` [PATCH net-next 31/37] can: kvaser_usb: refactor endpoint lookup Marc Kleine-Budde
2026-10-09 13:28 ` [PATCH net-next 32/37] can: kvaser_usb: validate command format before parsing in hydra receive path Marc Kleine-Budde
2026-10-09 13:28 ` Marc Kleine-Budde [this message]
2026-10-09 13:28 ` [PATCH net-next 34/37] can: mcp251xfd: mcp251xfd_probe(): reject devices without match data Marc Kleine-Budde
2026-10-09 13:28 ` [PATCH net-next 35/37] can: sun4i_can: sun4ican_probe(): fix clk leak Marc Kleine-Budde
2026-10-10 14:03   ` netdev-bot+sashiko
2026-10-09 13:28 ` [PATCH net-next 36/37] can: ucan: fix repeated word 'is' in comment Marc Kleine-Budde
2026-10-09 13:28 ` [PATCH net-next 37/37] can: xilinx_can: set CAN FD flags on received frames Marc Kleine-Budde
2026-10-09 13:57 ` [PATCH net-next 0/37] pull-request: can-next 2026-10-09 Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261009134323.64064-34-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=davem@davemloft.net \
    --cc=fanwu01@zju.edu.cn \
    --cc=kernel@pengutronix.de \
    --cc=kuba@kernel.org \
    --cc=linux-can@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox