* Re: [PATCH 16/19] ipv6: Store route neighbour in rt6_info struct.
From: Steffen Klassert @ 2012-07-05 13:14 UTC (permalink / raw)
To: David Miller; +Cc: netdev
In-Reply-To: <20120703.024700.1627207600679312181.davem@davemloft.net>
On Tue, Jul 03, 2012 at 02:47:00AM -0700, David Miller wrote:
>
> This makes for a simplified conversion away from dst_get_neighbour*().
>
> All code outside of ipv6 will use neigh lookups via dst_neigh_lookup*().
>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> ---
> include/net/ip6_fib.h | 2 ++
> net/ipv6/ip6_output.c | 8 ++++++--
> net/ipv6/route.c | 42 ++++++++++++++++++++++++++----------------
> net/ipv6/xfrm6_policy.c | 1 +
> 4 files changed, 35 insertions(+), 18 deletions(-)
>
> diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
> index a192f78..0fedbd8 100644
> --- a/include/net/ip6_fib.h
> +++ b/include/net/ip6_fib.h
> @@ -86,6 +86,8 @@ struct fib6_table;
> struct rt6_info {
> struct dst_entry dst;
>
> + struct neighbour *n;
> +
This pointer needs to be initialized when we allocate the
rt6_info, otherwise all my testboxes crash during noot.
I'll send a patch to do this.
^ permalink raw reply
* Re: [net-next RFC V5 5/5] virtio_net: support negotiating the number of queues through ctrl vq
From: Sasha Levin @ 2012-07-05 12:51 UTC (permalink / raw)
To: Jason Wang
Cc: krkumar2, habanero, mashirle, kvm, mst, netdev, linux-kernel,
virtualization, edumazet, tahm, jwhan, davem, sri
In-Reply-To: <1341484194-8108-6-git-send-email-jasowang@redhat.com>
On Thu, 2012-07-05 at 18:29 +0800, Jason Wang wrote:
> @@ -1387,6 +1404,10 @@ static int virtnet_probe(struct virtio_device *vdev)
> if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ))
> vi->has_cvq = true;
>
> + /* Use single tx/rx queue pair as default */
> + vi->num_queue_pairs = 1;
> + vi->total_queue_pairs = num_queue_pairs;
The code is using this "default" even if the amount of queue pairs it
wants was specified during initialization. This basically limits any
device to use 1 pair when starting up.
^ permalink raw reply
* [PATCH v6 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board
From: Heiko Schocher @ 2012-07-05 12:50 UTC (permalink / raw)
To: davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/
Cc: Heiko Schocher, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, netdev-u79uwXL29TY76Z2rM5mHXA,
David Woodhouse, Ben Dooks, Wolfram Sang, Sekhar Nori,
Kevin Hilman, Wolfgang Denk, Scott Wood, Sylwester Nawrocki
- AM1808 based board
- 64 MiB DDR ram
- 2 MiB Nor flash
- 128 MiB NAND flash
- use internal RTC
- I2C support
- hwmon lm75 support
- UBI/UBIFS support
- MMC support
- USB OTG support
Signed-off-by: Heiko Schocher <hs-ynQEQJNshbs@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org
Cc: linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Cc: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>
Cc: Kevin Hilman <khilman-l0cyMroinI0@public.gmane.org>
Cc: Wolfgang Denk <wd-ynQEQJNshbs@public.gmane.org>
Cc: Scott Wood <scottwood-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Sylwester Nawrocki <s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
- post this board support with USB support, even though
USB is only working with the 10 ms "workaround", posted here:
http://comments.gmane.org/gmane.linux.usb.general/54505
I see this issue also on the AM1808 TMDXEXP1808L evalboard.
- MMC and USB are not using OF support yet, ideas how to port
this are welcome. I need for USB and MMC boards board
specific callbacks, how to solve this with OF support?
- changes for v2:
- changes in the nand node due to comments from Scott Wood:
- add "ti,davinci-" prefix
- Dashes are preferred to underscores
- rename "nandflash" to "nand"
- introduce new "ti,davinci" specific properties for setting
up ecc_mode, ecc_bits, options and bbt options, instead
using linux defines
- changes for i2c due to comments from Sylwester Nawrocki:
- use "cell-index" instead "id"
- OF_DEV_AUXDATA in the machine code, instead pre-define
platform device name
- add comment from Grant Likely for i2c:
- removed "id" resp. "cell-index" completely
- fixed documentation
- use of_match_ptr()
- use devm_kzalloc() for allocating plattform data mem
- fixed a whitespace issue
- add net comments from Grant Likely:
- add prefix "ti,davinci-" to davinci specific property names
- remove version property
- use compatible name "ti,davinci-dm6460-emac"
- add comment from Grant Likely:
- rename compatible node
- do not use cell-index
- CONFIG_OF required for this board
TODO:
- create a generic board support file, as I got no
answer to my ping to grant, maybe this could be done
in a second step?
- changes for v3:
- add comments from Sergei Shtylyov:
- rename compatible" prop to "ti,cp_intc"
- cp_intc_init now used for Interrupt controller init
- changes for v4:
add comment from Nori Sekhar:
- rename davinci emac compatible property to "ti,davinci-dm6467-emac"
- remove "pinmux-handle" property as discussed here:
http://www.spinics.net/lists/arm-kernel/msg175701.html
with Nori Sekhar
- changes for v5:
add comments from Grant Likely:
- rename compatible" prop to "ti,cp-intc"
- changes for v6:
rework this patch, as patch
ARM: davinci: cp_intc: Add OF support for TI interrupt controller
was changed from Nori Sekhar on Jul 03, 2012; 9:16pm
Changes therefore in this patch:
Call of_irq_init() in the generic DT board file and not in the
interrupt controller code. See arch/arm/mach-at91/board-dt.c or
arch/arm/mach-omap2/board-generic.c for examples.
At this point the question raises, if we should rename this
board port from arch/arm/mach-davinci/enbw_cmc.c to
arch/arm/mach-davinci/board-dt.c ? Also the defconfig to
davinci_of_defconfig ... ? The USB and MMC callbacks are
currently board specific, but if other boards come in,
that could be easily adapted for their needs ...
arch/arm/boot/dts/enbw_cmc.dts | 183 +++++++++++
arch/arm/configs/enbw_cmc_defconfig | 126 ++++++++
arch/arm/mach-davinci/Kconfig | 9 +
arch/arm/mach-davinci/Makefile | 1 +
arch/arm/mach-davinci/board-enbw-cmc.c | 385 +++++++++++++++++++++++
arch/arm/mach-davinci/include/mach/uncompress.h | 1 +
6 files changed, 705 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/enbw_cmc.dts
create mode 100644 arch/arm/configs/enbw_cmc_defconfig
create mode 100644 arch/arm/mach-davinci/board-enbw-cmc.c
diff --git a/arch/arm/boot/dts/enbw_cmc.dts b/arch/arm/boot/dts/enbw_cmc.dts
new file mode 100644
index 0000000..32dc7a9
--- /dev/null
+++ b/arch/arm/boot/dts/enbw_cmc.dts
@@ -0,0 +1,183 @@
+/*
+ * Device Tree for the EnBW CMC plattform
+ *
+ * Copyright 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs-ynQEQJNshbs@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "EnBW CMC";
+ compatible = "enbw,cmc";
+
+ aliases {
+ ethernet0 = ð0;
+ };
+
+ arm {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xfffee000 0x00020000>;
+ intc: interrupt-controller@1 {
+ compatible = "ti,cp-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ti,intc-size = <101>;
+ reg = <0x0 0x2000>;
+ };
+ };
+ soc@1c00000 {
+ compatible = "ti,da850";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x01c00000 0x400000>;
+
+ serial0: serial@1c42000 {
+ compatible = "ti,da850", "ns16550a";
+ reg = <0x42000 0x100>;
+ clock-frequency = <150000000>;
+ reg-shift = <2>;
+ interrupts = <25>;
+ interrupt-parent = <&intc>;
+ };
+ serial1: serial@1d0c000 {
+ compatible = "ti,da850", "ns16550a";
+ reg = <0x10c000 0x100>;
+ clock-frequency = <150000000>;
+ reg-shift = <2>;
+ interrupts = <53>;
+ interrupt-parent = <&intc>;
+ };
+ serial2: serial@1d0d000 {
+ compatible = "ti,da850", "ns16550a";
+ reg = <0x10d000 0x100>;
+ clock-frequency = <150000000>;
+ reg-shift = <2>;
+ interrupts = <61>;
+ interrupt-parent = <&intc>;
+ };
+
+ eth0: emac@1e20000 {
+ compatible = "ti,davinci-dm6467-emac";
+ reg = <0x220000 0x4000>;
+ ti,davinci-ctrl-reg-offset = <0x3000>;
+ ti,davinci-ctrl-mod-reg-offset = <0x2000>;
+ ti,davinci-ctrl-ram-offset = <0>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <33
+ 34
+ 35
+ 36
+ >;
+ interrupt-parent = <&intc>;
+ };
+
+ i2c@1c22000 {
+ compatible = "ti,davinci-i2c";
+ reg = <0x22000 0x1000>;
+ clock-frequency = <100000>;
+ interrupts = <15>;
+ interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dtt@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+ };
+
+ wdt@1c21000 {
+ compatible = "ti,davinci-wdt";
+ reg = <0x00021000 0x1000>;
+ period = <100>;
+ };
+ bootcount@1c23000 {
+ compatible = "uboot,bootcount";
+ reg = <0x23060 0x20>;
+ };
+
+ };
+ onchipram@8000000 {
+ compatible = "ti,davinci-onchipram";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000000 0x20000>;
+ };
+ aemif@60000000 {
+ compatible = "ti,davinci-aemif";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x68000000 0x80000>;
+ ranges = <2 0 0x60000000 0x02000000
+ 3 0 0x62000000 0x02000000
+ 4 0 0x64000000 0x02000000
+ 5 0 0x66000000 0x02000000
+ 6 0 0x68000000 0x02000000>;
+ cs2@68000000 {
+ compatible = "ti,davinci-cs";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* all timings in nanoseconds */
+ cs = <2>;
+ asize = <1>;
+ ta = <0>;
+ rhold = <7>;
+ rstrobe = <42>;
+ rsetup = <14>;
+ whold = <7>;
+ wstrobe = <42>;
+ wsetup = <14>;
+ ew = <0>;
+ ss = <0>;
+ };
+ flash@2,0 {
+ compatible = "cfi-flash";
+ reg = <2 0x0 0x400000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ device-width = <2>;
+ };
+ nand_cs: cs3@68000000 {
+ compatible = "ti,davinci-cs";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* all timings in nanoseconds */
+ cs = <3>;
+ asize = <0>;
+ ta = <0>;
+ rhold = <7>;
+ rstrobe = <42>;
+ rsetup = <7>;
+ whold = <7>;
+ wstrobe = <14>;
+ wsetup = <7>;
+ ew = <0>;
+ ss = <0>;
+ };
+ nand@3,0 {
+ compatible = "ti,davinci-nand";
+ reg = <3 0x0 0x807ff
+ 6 0x0 0x8000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,davinci-chipselect = <1>;
+ ti,davinci-mask-ale = <0>;
+ ti,davinci-mask-cle = <0>;
+ ti,davinci-mask-chipsel = <0>;
+ ti,davinci-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ ti,davinci-nand-use-bbt;
+ timing-handle = <&nand_cs>;
+ };
+
+ };
+};
diff --git a/arch/arm/configs/enbw_cmc_defconfig b/arch/arm/configs/enbw_cmc_defconfig
new file mode 100644
index 0000000..b6b01c2
--- /dev/null
+++ b/arch/arm/configs/enbw_cmc_defconfig
@@ -0,0 +1,126 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_LOGBUFFER=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_DAVINCI=y
+CONFIG_ARCH_DAVINCI_DA850=y
+# CONFIG_MACH_DAVINCI_DA850_EVM is not set
+CONFIG_GPIO_PCA953X=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_USE_OF=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_DAVINCI=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_UBOOT_BOOTCOUNT=y
+CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_TI_DAVINCI_EMAC=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DAVINCI=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_SENSORS_LM75=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_WD=y
+CONFIG_DAVINCI_WATCHDOG=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_DA8XX=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_UAS=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_FUSB300=y
+CONFIG_USB_ETH=y
+CONFIG_MMC=y
+CONFIG_MMC_DAVINCI=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_OMAP=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_DEBUG_FS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=m
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 32d837d..4cb0469 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -202,6 +202,15 @@ config DA850_WL12XX
Say Y if you want to use a wl1271 expansion card connected to the
AM18x EVM.
+config MACH_ENBW_CMC
+ bool "EnBW Communication Module Compact"
+ default ARCH_DAVINCI_DA850
+ depends on ARCH_DAVINCI_DA850
+ select OF
+ help
+ Say Y here to select the EnBW Communication Module Compact
+ board.
+
config GPIO_PCA953X
default MACH_DAVINCI_DA850_EVM
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 2db78bd..12f3166 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o
obj-$(CONFIG_MACH_TNETV107X) += board-tnetv107x-evm.o
obj-$(CONFIG_MACH_MITYOMAPL138) += board-mityomapl138.o
obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o
+obj-$(CONFIG_MACH_ENBW_CMC) += board-enbw-cmc.o
# Power Management
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
diff --git a/arch/arm/mach-davinci/board-enbw-cmc.c b/arch/arm/mach-davinci/board-enbw-cmc.c
new file mode 100644
index 0000000..b475d6d
--- /dev/null
+++ b/arch/arm/mach-davinci/board-enbw-cmc.c
@@ -0,0 +1,385 @@
+/*
+ * EnBW Communication Module Compact board
+ * Copyright 2011 DENX Software Engineering GmbH
+ * Author: Heiko Schocher <hs-ynQEQJNshbs@public.gmane.org>
+ *
+ * based on:
+ * TI DA850/OMAP-L138 EVM board
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from: arch/arm/mach-davinci/board-da850-evm.c
+ * Original Copyrights follow:
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/console.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/aemif.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+#include <mach/mux.h>
+#include <mach/nand.h>
+#include <mach/spi.h>
+
+#define ENBW_CMC_MMCSD_CD_PIN GPIO_TO_PIN(3, 13)
+
+/*
+ * USB1 VBUS is controlled by GPIO7[12], over-current is reported on GPIO7[8].
+ */
+#define DA850_USB_VBUS_PIN GPIO_TO_PIN(7, 12)
+#define ON_BD_USB_OVC GPIO_TO_PIN(7, 8)
+
+#if defined(CONFIG_USB_OHCI_HCD)
+static irqreturn_t enbw_cmc_usb_ocic_irq(int irq, void *dev_id);
+static da8xx_ocic_handler_t enbw_cmc_usb_ocic_handler;
+
+static int enbw_cmc_usb_set_power(unsigned port, int on)
+{
+ gpio_set_value(DA850_USB_VBUS_PIN, on);
+ return 0;
+}
+
+static int enbw_cmc_usb_get_power(unsigned port)
+{
+ return gpio_get_value(DA850_USB_VBUS_PIN);
+}
+
+static int enbw_cmc_usb_get_oci(unsigned port)
+{
+ return !gpio_get_value(ON_BD_USB_OVC);
+}
+
+static irqreturn_t enbw_cmc_usb_ocic_irq(int, void *);
+
+static int enbw_cmc_usb_ocic_notify(da8xx_ocic_handler_t handler)
+{
+ int irq = gpio_to_irq(ON_BD_USB_OVC);
+ int error = 0;
+
+ if (handler != NULL) {
+ enbw_cmc_usb_ocic_handler = handler;
+
+ error = request_irq(irq, enbw_cmc_usb_ocic_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
+ "OHCI over-current indicator", NULL);
+ if (error)
+ pr_err("%s: could not request IRQ to watch "
+ "over-current indicator changes\n", __func__);
+ } else {
+ free_irq(irq, NULL);
+ }
+ return error;
+}
+
+static struct da8xx_ohci_root_hub enbw_cmc_usb11_pdata = {
+ .set_power = enbw_cmc_usb_set_power,
+ .get_power = enbw_cmc_usb_get_power,
+ .get_oci = enbw_cmc_usb_get_oci,
+ .ocic_notify = enbw_cmc_usb_ocic_notify,
+ .potpgt = (10 + 1) / 2, /* 10 ms max */
+};
+
+static irqreturn_t enbw_cmc_usb_ocic_irq(int irq, void *dev_id)
+{
+ enbw_cmc_usb_ocic_handler(&enbw_cmc_usb11_pdata, 1);
+ return IRQ_HANDLED;
+}
+#endif
+
+static __init void enbw_cmc_usb_init(void)
+{
+ int ret;
+ u32 cfgchip2;
+
+ /* Set up USB clock/mode in the CFGCHIP2 register. */
+ cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+
+ /* USB2.0 PHY reference clock is AUXCLK with 24MHz */
+ cfgchip2 &= ~CFGCHIP2_REFFREQ;
+ cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ;
+
+ /*
+ * Select internal reference clock for USB 2.0 PHY
+ * and use it as a clock source for USB 1.1 PHY
+ * (this is the default setting anyway).
+ */
+ cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX;
+ cfgchip2 |= CFGCHIP2_USB2PHYCLKMUX;
+
+ cfgchip2 &= ~CFGCHIP2_OTGMODE;
+ cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN;
+
+ __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+
+ /*
+ * SP2525A @ 5V supplies 500mA,
+ * with the power on to power good time of 10 ms.
+ */
+ ret = da8xx_register_usb20(500, 10);
+ if (ret)
+ pr_warning("%s: USB 2.0 registration failed: %d\n",
+ __func__, ret);
+
+#if defined(CONFIG_USB_OHCI_HCD)
+ ret = gpio_request_one(DA850_USB_VBUS_PIN,
+ GPIOF_DIR_OUT, "USB 1.1 VBUS");
+ if (ret < 0) {
+ pr_err("%s: failed to request GPIO for USB 1.1 port "
+ "power control: %d\n", __func__, ret);
+ return;
+ }
+ gpio_direction_input(DA850_USB_VBUS_PIN);
+
+ ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC");
+ if (ret) {
+ printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
+ "over-current indicator: %d\n", __func__, ret);
+ gpio_free(DA850_USB_VBUS_PIN);
+ return;
+ }
+ gpio_direction_input(ON_BD_USB_OVC);
+
+ ret = da8xx_register_usb11(&enbw_cmc_usb11_pdata);
+ if (ret) {
+ pr_warning("%s: USB 1.1 registration failed: %d\n",
+ __func__, ret);
+ gpio_free(ON_BD_USB_OVC);
+ gpio_free(DA850_USB_VBUS_PIN);
+ }
+#endif
+
+ return;
+}
+
+static int enbw_cmc_mmc_get_ro(int index)
+{
+ return 0;
+}
+
+static int enbw_cmc_mmc_get_cd(int index)
+{
+ return gpio_get_value(ENBW_CMC_MMCSD_CD_PIN) ? 1 : 0;
+}
+
+static struct davinci_mmc_config enbw_cmc_mmc_config = {
+ .get_ro = enbw_cmc_mmc_get_ro,
+ .get_cd = enbw_cmc_mmc_get_cd,
+ .wires = 4,
+ .max_freq = 50000000,
+ .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+ .version = MMC_CTLR_VERSION_2,
+};
+
+static int __init enbw_cmc_config_emac(void)
+{
+ void __iomem *cfg_chip3_base;
+ u32 val;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ if (!machine_is_enbw_cmc())
+ return 0;
+
+ cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
+ val = __raw_readl(cfg_chip3_base);
+ val &= ~BIT(8);
+ pr_info("EMAC: MII PHY configured, RMII PHY will not be"
+ " functional\n");
+
+ /* configure the CFGCHIP3 register for MII */
+ __raw_writel(val, cfg_chip3_base);
+
+ /* use complete info from OF */
+ soc_info->emac_pdata = NULL;
+
+ return 0;
+}
+device_initcall(enbw_cmc_config_emac);
+
+static const s16 da850_dma0_rsv_chans[][2] = {
+ /* (offset, number) */
+ {-1, -1}
+};
+
+static const s16 da850_dma0_rsv_slots[][2] = {
+ /* (offset, number) */
+ {-1, -1}
+};
+
+static const s16 da850_dma1_rsv_chans[][2] = {
+ /* (offset, number) */
+ {-1, -1}
+};
+
+static const s16 da850_dma1_rsv_slots[][2] = {
+ /* (offset, number) */
+ {-1, -1}
+};
+
+static struct edma_rsv_info da850_edma_cc0_rsv = {
+ .rsv_chans = da850_dma0_rsv_chans,
+ .rsv_slots = da850_dma0_rsv_slots,
+};
+
+static struct edma_rsv_info da850_edma_cc1_rsv = {
+ .rsv_chans = da850_dma1_rsv_chans,
+ .rsv_slots = da850_dma1_rsv_slots,
+};
+
+static struct edma_rsv_info *da850_edma_rsv[2] = {
+ &da850_edma_cc0_rsv,
+ &da850_edma_cc1_rsv,
+};
+
+#ifdef CONFIG_CPU_FREQ
+static __init int da850_evm_init_cpufreq(void)
+{
+ switch (system_rev & 0xF) {
+ case 3:
+ da850_max_speed = 456000;
+ break;
+ case 2:
+ da850_max_speed = 408000;
+ break;
+ case 1:
+ da850_max_speed = 372000;
+ break;
+ }
+
+ return da850_register_cpufreq("pll0_sysclk3");
+}
+#else
+static __init int da850_evm_init_cpufreq(void) { return 0; }
+#endif
+
+struct of_dev_auxdata enbw_cmc_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "ti,davinci-wdt", NULL),
+ OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
+ OF_DEV_AUXDATA("ti,davinci-i2c", 0x01e28000, "i2c_davinci.2", NULL),
+ OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1",
+ NULL),
+ {}
+};
+
+const struct of_device_id enbw_cmc_bus_match_table[] = {
+ { .compatible = "simple-bus", },
+ { .compatible = "ti,da850", },
+ { .compatible = "ti,davinci-onchipram", },
+ { .compatible = "ti,davinci-aemif", },
+ {} /* Empty terminated list */
+};
+
+static __init void enbw_cmc_init(void)
+{
+ int ret;
+
+ of_platform_populate(NULL, enbw_cmc_bus_match_table,
+ enbw_cmc_auxdata_lookup, NULL);
+
+ ret = da8xx_register_watchdog();
+ if (ret)
+ pr_warning("enbw_cmc_init: watchdog registration failed: %d\n",
+ ret);
+
+ ret = da850_register_edma(da850_edma_rsv);
+ if (ret)
+ pr_warning("enbw_cmc_init: edma registration failed: %d\n",
+ ret);
+
+ /*
+ * shut down uart 0 this port is not used on the board
+ */
+ __raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
+
+ ret = da8xx_register_rtc();
+ if (ret)
+ pr_warning("enbw_cmc_init: rtc setup failed: %d\n", ret);
+
+ ret = da850_evm_init_cpufreq();
+ if (ret)
+ pr_warning("enbw_cmc_init: cpufreq registration failed: %d\n",
+ ret);
+
+ ret = da8xx_register_cpuidle();
+ if (ret)
+ pr_warning("enbw_cmc_init: cpuidle registration failed: %d\n",
+ ret);
+
+ ret = gpio_request(ENBW_CMC_MMCSD_CD_PIN, "MMC CD\n");
+ if (ret)
+ pr_warning("enbw_cmc_init: can not open GPIO %d\n",
+ ENBW_CMC_MMCSD_CD_PIN);
+ gpio_direction_input(ENBW_CMC_MMCSD_CD_PIN);
+
+ ret = da850_register_mmcsd1(&enbw_cmc_mmc_config);
+ if (ret)
+ pr_warning("enbw_cmc_init: mmcsd1 registration failed:"
+ " %d\n", ret);
+
+ enbw_cmc_usb_init();
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init enbw_cmc_console_init(void)
+{
+ if (!machine_is_enbw_cmc())
+ return 0;
+
+ return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(enbw_cmc_console_init);
+#endif
+
+static void __init enbw_cmc_map_io(void)
+{
+ da850_init();
+}
+
+static const char *enbw_cmc_board_compat[] __initconst = {
+ "enbw,cmc",
+ NULL
+};
+
+static struct of_device_id irq_of_match[] __initdata = {
+ { .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
+ { }
+};
+
+static void __init cp_dt_init_irq(void)
+{
+ of_irq_init(irq_of_match);
+}
+
+MACHINE_START(ENBW_CMC, "EnBW CMC")
+ .map_io = enbw_cmc_map_io,
+ .init_irq = cp_dt_init_irq,
+ .timer = &davinci_timer,
+ .init_machine = enbw_cmc_init,
+ .dt_compat = enbw_cmc_board_compat,
+ .dma_zone_size = SZ_128M,
+ .restart = da8xx_restart,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index da2fb2c..6119543 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -98,6 +98,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
DEBUG_LL_DA8XX(davinci_da850_evm, 2);
DEBUG_LL_DA8XX(mityomapl138, 1);
DEBUG_LL_DA8XX(omapl138_hawkboard, 2);
+ DEBUG_LL_DA8XX(enbw_cmc, 2);
/* TNETV107x boards */
DEBUG_LL_TNETV107X(tnetv107x, 1);
--
1.7.7.6
^ permalink raw reply related
* Re: [PATCH v2] cgroup: fix panic in netprio_cgroup
From: Neil Horman @ 2012-07-05 12:40 UTC (permalink / raw)
To: Gao feng; +Cc: davem, netdev, linux-kernel, tj, lizefan, eric.dumazet
In-Reply-To: <1341480520-25081-1-git-send-email-gaofeng@cn.fujitsu.com>
On Thu, Jul 05, 2012 at 05:28:40PM +0800, Gao feng wrote:
> we set max_prioidx to the first zero bit index of prioidx_map in
> function get_prioidx.
>
> So when we delete the low index netprio cgroup and adding a new
> netprio cgroup again,the max_prioidx will be set to the low index.
>
> when we set the high index cgroup's net_prio.ifpriomap,the function
> write_priomap will call update_netdev_tables to alloc memory which
> size is sizeof(struct netprio_map) + sizeof(u32) * (max_prioidx + 1),
> so the size of array that map->priomap point to is max_prioidx +1,
> which is low than what we actually need.
>
> fix this by adding check in get_prioidx,only set max_prioidx when
> max_prioidx low than the new prioidx.
>
> Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
> ---
> net/core/netprio_cgroup.c | 3 ++-
> 1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/net/core/netprio_cgroup.c b/net/core/netprio_cgroup.c
> index 5b8aa2f..aa907ed 100644
> --- a/net/core/netprio_cgroup.c
> +++ b/net/core/netprio_cgroup.c
> @@ -49,8 +49,9 @@ static int get_prioidx(u32 *prio)
> return -ENOSPC;
> }
> set_bit(prioidx, prioidx_map);
> + if (atomic_read(&max_prioidx) < prioidx)
> + atomic_set(&max_prioidx, prioidx);
> spin_unlock_irqrestore(&prioidx_map_lock, flags);
> - atomic_set(&max_prioidx, prioidx);
> *prio = prioidx;
> return 0;
> }
> --
> 1.7.7.6
>
>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
^ permalink raw reply
* Tá do bosca poist níos mó ná an teorainn a stóráil 2GB
From: ríomhphoist Chóras admin @ 2012-07-05 12:33 UTC (permalink / raw)
Tá do bosca poist níos mó ná an teorainn a stóráil 2GB atá conas
leagtha síos ag an riarthóir, faoi láthair ag rith ag 2.30GB,
b'fhéidir nach mbeadh sé in ann a sheoladh nó a fháil post nua go dtí go tú
bhailíochtú do bhosca poist.
A ath-bhailíochtú do bhosca poist. cliceáil ar an nasc thíos:
https://docs.google.com/spreadsheet/viewform?formkey=dC00NFA2WmxMV3NHaHpfR2Z6MWI3Umc6MQ
go raibh maith agat
riarthóir córas
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
^ permalink raw reply
* Re: [net-next RFC V5 2/5] virtio_ring: move queue_index to vring_virtqueue
From: Sasha Levin @ 2012-07-05 11:40 UTC (permalink / raw)
To: Jason Wang
Cc: krkumar2, habanero, mashirle, kvm, mst, netdev, linux-kernel,
virtualization, edumazet, tahm, jwhan, davem, sri
In-Reply-To: <1341484194-8108-3-git-send-email-jasowang@redhat.com>
On Thu, 2012-07-05 at 18:29 +0800, Jason Wang wrote:
> Instead of storing the queue index in virtio infos, this patch moves them to
> vring_virtqueue and introduces helpers to set and get the value. This would
> simplify the management and tracing.
>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch actually fails to compile:
drivers/virtio/virtio_mmio.c: In function ‘vm_notify’:
drivers/virtio/virtio_mmio.c:229:13: error: ‘struct virtio_mmio_vq_info’ has no member named ‘queue_index’
drivers/virtio/virtio_mmio.c: In function ‘vm_del_vq’:
drivers/virtio/virtio_mmio.c:278:13: error: ‘struct virtio_mmio_vq_info’ has no member named ‘queue_index’
make[2]: *** [drivers/virtio/virtio_mmio.o] Error 1
It probably misses the following hunks:
diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index f5432b6..12b6180 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -222,11 +222,10 @@ static void vm_reset(struct virtio_device *vdev)
static void vm_notify(struct virtqueue *vq)
{
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vq->vdev);
- struct virtio_mmio_vq_info *info = vq->priv;
/* We write the queue's selector into the notification register to
* signal the other end */
- writel(info->queue_index, vm_dev->base + VIRTIO_MMIO_QUEUE_NOTIFY);
+ writel(virtqueue_get_queue_index(vq), vm_dev->base + VIRTIO_MMIO_QUEUE_NOTIFY);
}
/* Notify all virtqueues on an interrupt. */
@@ -275,7 +274,7 @@ static void vm_del_vq(struct virtqueue *vq)
vring_del_virtqueue(vq);
/* Select and deactivate the queue */
- writel(info->queue_index, vm_dev->base + VIRTIO_MMIO_QUEUE_SEL);
+ writel(virtqueue_get_queue_index(vq), vm_dev->base + VIRTIO_MMIO_QUEUE_SEL);
writel(0, vm_dev->base + VIRTIO_MMIO_QUEUE_PFN);
size = PAGE_ALIGN(vring_size(info->num, VIRTIO_MMIO_VRING_ALIGN));
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply related
* [PATCH v2] net: qmi_wwan: add ZTE MF60
From: Bjørn Mork @ 2012-07-05 11:13 UTC (permalink / raw)
To: netdev; +Cc: Bjørn Mork
Adding a device with limited QMI support. It does not support
normal QMI_WDS commands for connection management. Instead,
sending a QMI_CTL SET_INSTANCE_ID command is required to
enable the network interface:
01 0f 00 00 00 00 00 00 20 00 04 00 01 01 00 00
A number of QMI_DMS and QMI_NAS commands are also supported
for optional device management.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
---
v2: replaced spurious tab with space as requested by David M
drivers/net/usb/qmi_wwan.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index b01960f..a051ced 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -346,6 +346,15 @@ static const struct driver_info qmi_wwan_force_int1 = {
.data = BIT(1), /* interface whitelist bitmap */
};
+static const struct driver_info qmi_wwan_force_int2 = {
+ .description = "Qualcomm WWAN/QMI device",
+ .flags = FLAG_WWAN,
+ .bind = qmi_wwan_bind_shared,
+ .unbind = qmi_wwan_unbind_shared,
+ .manage_power = qmi_wwan_manage_power,
+ .data = BIT(2), /* interface whitelist bitmap */
+};
+
static const struct driver_info qmi_wwan_force_int3 = {
.description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
@@ -498,6 +507,15 @@ static const struct usb_device_id products[] = {
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_force_int4,
},
+ { /* ZTE MF60 */
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x19d2,
+ .idProduct = 0x1402,
+ .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0xff,
+ .bInterfaceProtocol = 0xff,
+ .driver_info = (unsigned long)&qmi_wwan_force_int2,
+ },
{ /* Sierra Wireless MC77xx in QMI mode */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x1199,
--
1.7.10
^ permalink raw reply related
* Re: [PATCH net] net: qmi_wwan: add ZTE MF60
From: Bjørn Mork @ 2012-07-05 11:09 UTC (permalink / raw)
To: David Miller; +Cc: netdev
In-Reply-To: <20120705.031648.85978116859244029.davem@davemloft.net>
David Miller <davem@davemloft.net> writes:
> From: Bjørn Mork <bjorn@mork.no>
> Date: Mon, 2 Jul 2012 19:53:17 +0200
>
>> +static const struct driver_info qmi_wwan_force_int2 = {
>
> Please get rid of that strange tab character and resubmit.
Sure. Will do.
Looks like a thoughtless copy-paste thing originally coming from
cdc_ether. Funny thing is that it has survived several incarnations
already, as this specific instance came from a copy-paste within the
same driver.
It's all checkpatch'es fault for not warning me :-)
Luckily all of these will go away when the whitelisting is removed
(i.e. when the USB interface number matching in 3.6 is available).
Bjørn
^ permalink raw reply
* Re: TCP transmit performance regression
From: Eric Dumazet @ 2012-07-05 10:41 UTC (permalink / raw)
To: Ming Lei; +Cc: Network Development, David Miller
In-Reply-To: <CACVXFVNZ=64+=w1ZapXeXq7oYz0OBbBRLuH8rNSeDHyz7zGOZw@mail.gmail.com>
On Thu, 2012-07-05 at 18:32 +0800, Ming Lei wrote:
> After testing on beagle-xm, the patch is good and network is OK, but
> iperf performance is still no improvement, see below:
>
> [root@root]#iperf -c 192.168.0.103 -w 131072 -t 10
> ------------------------------------------------------------
> Client connecting to 192.168.0.103, TCP port 5001
> TCP window size: 256 KByte (WARNING: requested 128 KByte)
> ------------------------------------------------------------
> [ 3] local 192.168.0.119 port 46776 connected with 192.168.0.103 port 5001
> [ ID] Interval Transfer Bandwidth
> [ 3] 0.0-10.0 sec 41.4 MBytes 34.7 Mbits/sec
>
I fear there are copies in the tx path as well, in smsc95xx_tx_fixup()
Could you add traces in this function to check if skb_copy_expand() is
called ?
^ permalink raw reply
* Re: TCP transmit performance regression
From: Ming Lei @ 2012-07-05 10:32 UTC (permalink / raw)
To: Eric Dumazet; +Cc: Network Development, David Miller
In-Reply-To: <1341481760.2583.3579.camel@edumazet-glaptop>
On Thu, Jul 5, 2012 at 5:49 PM, Eric Dumazet <eric.dumazet@gmail.com> wrote:
> On Thu, 2012-07-05 at 16:42 +0800, Ming Lei wrote:
>> On Thu, Jul 5, 2012 at 4:33 PM, Eric Dumazet <eric.dumazet@gmail.com> wrote:
>> > On Thu, 2012-07-05 at 16:27 +0800, Ming Lei wrote:
>> >
>> >> After some investigation, the problem is caused by enabling
>> >> DEBUG_SLAB, so it is not a regression.
>> >>
>> >
>> > Strange, unless your machine is a _very_ slow one maybe ?
>>
>> It is a beagle-xm board, and its cpu is ARMv7, 1GHz.
>
> OK, driver seems buggy, please try following patch (on both sides if
> possible)
>
> drivers/net/usb/smsc95xx.c | 11 ++++-------
> 1 file changed, 4 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
> index b1112e7..0a4ae35 100644
> --- a/drivers/net/usb/smsc95xx.c
> +++ b/drivers/net/usb/smsc95xx.c
> @@ -1084,26 +1084,23 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
> if (skb->len == size) {
> if (dev->net->features & NETIF_F_RXCSUM)
> smsc95xx_rx_csum_offload(skb);
> - skb_trim(skb, skb->len - 4); /* remove fcs */
> + __skb_trim(skb, skb->len - 4); /* remove fcs */
> skb->truesize = size + sizeof(struct sk_buff);
>
> return 1;
> }
>
> - ax_skb = skb_clone(skb, GFP_ATOMIC);
> + ax_skb = netdev_alloc_skb_ip_align(dev->net, size);
> if (unlikely(!ax_skb)) {
> netdev_warn(dev->net, "Error allocating skb\n");
> return 0;
> }
>
> - ax_skb->len = size;
> - ax_skb->data = packet;
> - skb_set_tail_pointer(ax_skb, size);
> + memcpy(skb_put(ax_skb, size), packet, size);
>
> if (dev->net->features & NETIF_F_RXCSUM)
> smsc95xx_rx_csum_offload(ax_skb);
> - skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
> - ax_skb->truesize = size + sizeof(struct sk_buff);
> + __skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
>
> usbnet_skb_return(dev, ax_skb);
> }
>
>
After testing on beagle-xm, the patch is good and network is OK, but
iperf performance is still no improvement, see below:
[root@root]#iperf -c 192.168.0.103 -w 131072 -t 10
------------------------------------------------------------
Client connecting to 192.168.0.103, TCP port 5001
TCP window size: 256 KByte (WARNING: requested 128 KByte)
------------------------------------------------------------
[ 3] local 192.168.0.119 port 46776 connected with 192.168.0.103 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 41.4 MBytes 34.7 Mbits/sec
Thanks,
--
Ming Lei
^ permalink raw reply
* [net-next RFC V5 5/5] virtio_net: support negotiating the number of queues through ctrl vq
From: Jason Wang @ 2012-07-05 10:29 UTC (permalink / raw)
To: mst, mashirle, krkumar2, habanero, rusty, netdev, linux-kernel,
virtualization, edumazet, tahm, jwhan, davem
Cc: kvm, sri
In-Reply-To: <1341484194-8108-1-git-send-email-jasowang@redhat.com>
This patch let the virtio_net driver can negotiate the number of queues it
wishes to use through control virtqueue and export an ethtool interface to let
use tweak it.
As current multiqueue virtio-net implementation has optimizations on per-cpu
virtuqueues, so only two modes were support:
- single queue pair mode
- multiple queue paris mode, the number of queues matches the number of vcpus
The single queue mode were used by default currently due to regression of
multiqueue mode in some test (especially in stream test).
Since virtio core does not support paritially deleting virtqueues, so during
mode switching the whole virtqueue were deleted and the driver would re-create
the virtqueues it would used.
btw. The queue number negotiating were defered to .ndo_open(), this is because
only after feature negotitaion could we send the command to control virtqueue
(as it may also use event index).
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
drivers/net/virtio_net.c | 171 ++++++++++++++++++++++++++++++++++---------
include/linux/virtio_net.h | 7 ++
2 files changed, 142 insertions(+), 36 deletions(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 7410187..3339eeb 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -88,6 +88,7 @@ struct receive_queue {
struct virtnet_info {
u16 num_queue_pairs; /* # of RX/TX vq pairs */
+ u16 total_queue_pairs;
struct send_queue *sq[MAX_QUEUES] ____cacheline_aligned_in_smp;
struct receive_queue *rq[MAX_QUEUES] ____cacheline_aligned_in_smp;
@@ -137,6 +138,8 @@ struct padded_vnet_hdr {
char padding[6];
};
+static const struct ethtool_ops virtnet_ethtool_ops;
+
static inline int txq_get_qnum(struct virtnet_info *vi, struct virtqueue *vq)
{
int ret = virtqueue_get_queue_index(vq);
@@ -802,22 +805,6 @@ static void virtnet_netpoll(struct net_device *dev)
}
#endif
-static int virtnet_open(struct net_device *dev)
-{
- struct virtnet_info *vi = netdev_priv(dev);
- int i;
-
- for (i = 0; i < vi->num_queue_pairs; i++) {
- /* Make sure we have some buffers: if oom use wq. */
- if (!try_fill_recv(vi->rq[i], GFP_KERNEL))
- queue_delayed_work(system_nrt_wq,
- &vi->rq[i]->refill, 0);
- virtnet_napi_enable(vi->rq[i]);
- }
-
- return 0;
-}
-
/*
* Send command via the control virtqueue and check status. Commands
* supported by the hypervisor, as indicated by feature bits, should
@@ -873,6 +860,43 @@ static void virtnet_ack_link_announce(struct virtnet_info *vi)
rtnl_unlock();
}
+static int virtnet_set_queues(struct virtnet_info *vi)
+{
+ struct scatterlist sg;
+ struct net_device *dev = vi->dev;
+ sg_init_one(&sg, &vi->num_queue_pairs, sizeof(vi->num_queue_pairs));
+
+ if (!vi->has_cvq)
+ return -EINVAL;
+
+ if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MULTIQUEUE,
+ VIRTIO_NET_CTRL_MULTIQUEUE_QNUM, &sg, 1, 0)){
+ dev_warn(&dev->dev, "Fail to set the number of queue pairs to"
+ " %d\n", vi->num_queue_pairs);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int virtnet_open(struct net_device *dev)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ int i;
+
+ for (i = 0; i < vi->num_queue_pairs; i++) {
+ /* Make sure we have some buffers: if oom use wq. */
+ if (!try_fill_recv(vi->rq[i], GFP_KERNEL))
+ queue_delayed_work(system_nrt_wq,
+ &vi->rq[i]->refill, 0);
+ virtnet_napi_enable(vi->rq[i]);
+ }
+
+ virtnet_set_queues(vi);
+
+ return 0;
+}
+
static int virtnet_close(struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
@@ -1013,12 +1037,6 @@ static void virtnet_get_drvinfo(struct net_device *dev,
}
-static const struct ethtool_ops virtnet_ethtool_ops = {
- .get_drvinfo = virtnet_get_drvinfo,
- .get_link = ethtool_op_get_link,
- .get_ringparam = virtnet_get_ringparam,
-};
-
#define MIN_MTU 68
#define MAX_MTU 65535
@@ -1235,7 +1253,7 @@ static int virtnet_find_vqs(struct virtnet_info *vi)
err:
if (ret && names)
- for (i = 0; i < vi->num_queue_pairs * 2; i++)
+ for (i = 0; i < total_vqs * 2; i++)
kfree(names[i]);
kfree(names);
@@ -1373,7 +1391,6 @@ static int virtnet_probe(struct virtio_device *vdev)
mutex_init(&vi->config_lock);
vi->config_enable = true;
INIT_WORK(&vi->config_work, virtnet_config_changed_work);
- vi->num_queue_pairs = num_queue_pairs;
/* If we can receive ANY GSO packets, we must allocate large ones. */
if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||
@@ -1387,6 +1404,10 @@ static int virtnet_probe(struct virtio_device *vdev)
if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ))
vi->has_cvq = true;
+ /* Use single tx/rx queue pair as default */
+ vi->num_queue_pairs = 1;
+ vi->total_queue_pairs = num_queue_pairs;
+
/* Allocate/initialize the rx/tx queues, and invoke find_vqs */
err = virtnet_setup_vqs(vi);
if (err)
@@ -1396,6 +1417,9 @@ static int virtnet_probe(struct virtio_device *vdev)
virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VLAN))
dev->features |= NETIF_F_HW_VLAN_FILTER;
+ netif_set_real_num_tx_queues(dev, 1);
+ netif_set_real_num_rx_queues(dev, 1);
+
err = register_netdev(dev);
if (err) {
pr_debug("virtio_net: registering device failed\n");
@@ -1403,7 +1427,7 @@ static int virtnet_probe(struct virtio_device *vdev)
}
/* Last of all, set up some receive buffers. */
- for (i = 0; i < num_queue_pairs; i++) {
+ for (i = 0; i < vi->num_queue_pairs; i++) {
try_fill_recv(vi->rq[i], GFP_KERNEL);
/* If we didn't even get one input buffer, we're useless. */
@@ -1474,10 +1498,8 @@ static void __devexit virtnet_remove(struct virtio_device *vdev)
free_netdev(vi->dev);
}
-#ifdef CONFIG_PM
-static int virtnet_freeze(struct virtio_device *vdev)
+static void virtnet_stop(struct virtnet_info *vi)
{
- struct virtnet_info *vi = vdev->priv;
int i;
/* Prevent config work handler from accessing the device */
@@ -1493,17 +1515,10 @@ static int virtnet_freeze(struct virtio_device *vdev)
for (i = 0; i < vi->num_queue_pairs; i++)
napi_disable(&vi->rq[i]->napi);
-
- remove_vq_common(vi);
-
- flush_work(&vi->config_work);
-
- return 0;
}
-static int virtnet_restore(struct virtio_device *vdev)
+static int virtnet_start(struct virtnet_info *vi)
{
- struct virtnet_info *vi = vdev->priv;
int err, i;
err = virtnet_setup_vqs(vi);
@@ -1527,6 +1542,29 @@ static int virtnet_restore(struct virtio_device *vdev)
return 0;
}
+
+#ifdef CONFIG_PM
+static int virtnet_freeze(struct virtio_device *vdev)
+{
+ struct virtnet_info *vi = vdev->priv;
+
+ virtnet_stop(vi);
+
+ remove_vq_common(vi);
+
+ flush_work(&vi->config_work);
+
+ return 0;
+}
+
+static int virtnet_restore(struct virtio_device *vdev)
+{
+ struct virtnet_info *vi = vdev->priv;
+
+ virtnet_start(vi);
+
+ return 0;
+}
#endif
static struct virtio_device_id id_table[] = {
@@ -1560,6 +1598,67 @@ static struct virtio_driver virtio_net_driver = {
#endif
};
+static int virtnet_set_channels(struct net_device *dev,
+ struct ethtool_channels *channels)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ u16 queues = channels->rx_count;
+ unsigned status = VIRTIO_CONFIG_S_ACKNOWLEDGE | VIRTIO_CONFIG_S_DRIVER;
+
+ if (channels->rx_count != channels->tx_count)
+ return -EINVAL;
+ /* Only two modes were support currently */
+ if (queues != vi->total_queue_pairs && queues != 1)
+ return -EINVAL;
+ if (!vi->has_cvq)
+ return -EINVAL;
+
+ virtnet_stop(vi);
+
+ netif_set_real_num_tx_queues(dev, queues);
+ netif_set_real_num_rx_queues(dev, queues);
+
+ remove_vq_common(vi);
+ flush_work(&vi->config_work);
+
+ vi->num_queue_pairs = queues;
+ virtnet_start(vi);
+
+ vi->vdev->config->finalize_features(vi->vdev);
+
+ if (virtnet_set_queues(vi))
+ status |= VIRTIO_CONFIG_S_FAILED;
+ else
+ status |= VIRTIO_CONFIG_S_DRIVER_OK;
+
+ vi->vdev->config->set_status(vi->vdev, status);
+
+ return 0;
+}
+
+static void virtnet_get_channels(struct net_device *dev,
+ struct ethtool_channels *channels)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+
+ channels->max_rx = vi->total_queue_pairs;
+ channels->max_tx = vi->total_queue_pairs;
+ channels->max_other = 0;
+ channels->max_combined = 0;
+ channels->rx_count = vi->num_queue_pairs;
+ channels->tx_count = vi->num_queue_pairs;
+ channels->other_count = 0;
+ channels->combined_count = 0;
+}
+
+static const struct ethtool_ops virtnet_ethtool_ops = {
+ .get_drvinfo = virtnet_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_ringparam = virtnet_get_ringparam,
+ .set_channels = virtnet_set_channels,
+ .get_channels = virtnet_get_channels,
+};
+
static int __init init(void)
{
return register_virtio_driver(&virtio_net_driver);
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 60f09ff..0d21e08 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -169,4 +169,11 @@ struct virtio_net_ctrl_mac {
#define VIRTIO_NET_CTRL_ANNOUNCE 3
#define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0
+/*
+ * Control multiqueue
+ *
+ */
+#define VIRTIO_NET_CTRL_MULTIQUEUE 4
+ #define VIRTIO_NET_CTRL_MULTIQUEUE_QNUM 0
+
#endif /* _LINUX_VIRTIO_NET_H */
--
1.7.1
^ permalink raw reply related
* [net-next RFC V5 4/5] virtio_net: multiqueue support
From: Jason Wang @ 2012-07-05 10:29 UTC (permalink / raw)
To: mst, mashirle, krkumar2, habanero, rusty, netdev, linux-kernel,
virtualization, edumazet, tahm, jwhan, davem
Cc: kvm, sri
In-Reply-To: <1341484194-8108-1-git-send-email-jasowang@redhat.com>
This patch converts virtio_net to a multi queue device. After negotiated
VIRTIO_NET_F_MULTIQUEUE feature, the virtio device has many tx/rx queue pairs,
and driver could read the number from config space.
The driver expects the number of rx/tx queue paris is equal to the number of
vcpus. To maximize the performance under this per-cpu rx/tx queue pairs, some
optimization were introduced:
- Txq selection is based on the processor id in order to avoid contending a lock
whose owner may exits to host.
- Since the txq/txq were per-cpu, affinity hint were set to the cpu that owns
the queue pairs.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
drivers/net/virtio_net.c | 645 ++++++++++++++++++++++++++++++-------------
include/linux/virtio_net.h | 2 +
2 files changed, 452 insertions(+), 195 deletions(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 1db445b..7410187 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -26,6 +26,7 @@
#include <linux/scatterlist.h>
#include <linux/if_vlan.h>
#include <linux/slab.h>
+#include <linux/interrupt.h>
static int napi_weight = 128;
module_param(napi_weight, int, 0444);
@@ -41,6 +42,8 @@ module_param(gso, bool, 0444);
#define VIRTNET_SEND_COMMAND_SG_MAX 2
#define VIRTNET_DRIVER_VERSION "1.0.0"
+#define MAX_QUEUES 256
+
struct virtnet_stats {
struct u64_stats_sync tx_syncp;
struct u64_stats_sync rx_syncp;
@@ -51,43 +54,69 @@ struct virtnet_stats {
u64 rx_packets;
};
-struct virtnet_info {
- struct virtio_device *vdev;
- struct virtqueue *rvq, *svq, *cvq;
- struct net_device *dev;
+/* Internal representation of a send virtqueue */
+struct send_queue {
+ /* Virtqueue associated with this send _queue */
+ struct virtqueue *vq;
+
+ /* TX: fragments + linear part + virtio header */
+ struct scatterlist sg[MAX_SKB_FRAGS + 2];
+};
+
+/* Internal representation of a receive virtqueue */
+struct receive_queue {
+ /* Virtqueue associated with this receive_queue */
+ struct virtqueue *vq;
+
+ /* Back pointer to the virtnet_info */
+ struct virtnet_info *vi;
+
struct napi_struct napi;
- unsigned int status;
/* Number of input buffers, and max we've ever had. */
unsigned int num, max;
+ /* Work struct for refilling if we run low on memory. */
+ struct delayed_work refill;
+
+ /* Chain pages by the private ptr. */
+ struct page *pages;
+
+ /* RX: fragments + linear part + virtio header */
+ struct scatterlist sg[MAX_SKB_FRAGS + 2];
+};
+
+struct virtnet_info {
+ u16 num_queue_pairs; /* # of RX/TX vq pairs */
+
+ struct send_queue *sq[MAX_QUEUES] ____cacheline_aligned_in_smp;
+ struct receive_queue *rq[MAX_QUEUES] ____cacheline_aligned_in_smp;
+ struct virtqueue *cvq;
+
+ struct virtio_device *vdev;
+ struct net_device *dev;
+ unsigned int status;
+
/* I like... big packets and I cannot lie! */
bool big_packets;
/* Host will merge rx buffers for big packets (shake it! shake it!) */
bool mergeable_rx_bufs;
+ /* Has control virtqueue */
+ bool has_cvq;
+
/* enable config space updates */
bool config_enable;
/* Active statistics */
struct virtnet_stats __percpu *stats;
- /* Work struct for refilling if we run low on memory. */
- struct delayed_work refill;
-
/* Work struct for config space updates */
struct work_struct config_work;
/* Lock for config space updates */
struct mutex config_lock;
-
- /* Chain pages by the private ptr. */
- struct page *pages;
-
- /* fragments + linear part + virtio header */
- struct scatterlist rx_sg[MAX_SKB_FRAGS + 2];
- struct scatterlist tx_sg[MAX_SKB_FRAGS + 2];
};
struct skb_vnet_hdr {
@@ -108,6 +137,22 @@ struct padded_vnet_hdr {
char padding[6];
};
+static inline int txq_get_qnum(struct virtnet_info *vi, struct virtqueue *vq)
+{
+ int ret = virtqueue_get_queue_index(vq);
+
+ /* skip ctrl vq */
+ if (vi->has_cvq)
+ return (ret - 1) / 2;
+ else
+ return ret / 2;
+}
+
+static inline int rxq_get_qnum(struct virtnet_info *vi, struct virtqueue *vq)
+{
+ return virtqueue_get_queue_index(vq) / 2;
+}
+
static inline struct skb_vnet_hdr *skb_vnet_hdr(struct sk_buff *skb)
{
return (struct skb_vnet_hdr *)skb->cb;
@@ -117,22 +162,22 @@ static inline struct skb_vnet_hdr *skb_vnet_hdr(struct sk_buff *skb)
* private is used to chain pages for big packets, put the whole
* most recent used list in the beginning for reuse
*/
-static void give_pages(struct virtnet_info *vi, struct page *page)
+static void give_pages(struct receive_queue *rq, struct page *page)
{
struct page *end;
/* Find end of list, sew whole thing into vi->pages. */
for (end = page; end->private; end = (struct page *)end->private);
- end->private = (unsigned long)vi->pages;
- vi->pages = page;
+ end->private = (unsigned long)rq->pages;
+ rq->pages = page;
}
-static struct page *get_a_page(struct virtnet_info *vi, gfp_t gfp_mask)
+static struct page *get_a_page(struct receive_queue *rq, gfp_t gfp_mask)
{
- struct page *p = vi->pages;
+ struct page *p = rq->pages;
if (p) {
- vi->pages = (struct page *)p->private;
+ rq->pages = (struct page *)p->private;
/* clear private here, it is used to chain pages */
p->private = 0;
} else
@@ -140,15 +185,15 @@ static struct page *get_a_page(struct virtnet_info *vi, gfp_t gfp_mask)
return p;
}
-static void skb_xmit_done(struct virtqueue *svq)
+static void skb_xmit_done(struct virtqueue *vq)
{
- struct virtnet_info *vi = svq->vdev->priv;
+ struct virtnet_info *vi = vq->vdev->priv;
/* Suppress further interrupts. */
- virtqueue_disable_cb(svq);
+ virtqueue_disable_cb(vq);
/* We were probably waiting for more output buffers. */
- netif_wake_queue(vi->dev);
+ netif_wake_subqueue(vi->dev, txq_get_qnum(vi, vq));
}
static void set_skb_frag(struct sk_buff *skb, struct page *page,
@@ -167,9 +212,10 @@ static void set_skb_frag(struct sk_buff *skb, struct page *page,
}
/* Called from bottom half context */
-static struct sk_buff *page_to_skb(struct virtnet_info *vi,
+static struct sk_buff *page_to_skb(struct receive_queue *rq,
struct page *page, unsigned int len)
{
+ struct virtnet_info *vi = rq->vi;
struct sk_buff *skb;
struct skb_vnet_hdr *hdr;
unsigned int copy, hdr_len, offset;
@@ -225,12 +271,12 @@ static struct sk_buff *page_to_skb(struct virtnet_info *vi,
}
if (page)
- give_pages(vi, page);
+ give_pages(rq, page);
return skb;
}
-static int receive_mergeable(struct virtnet_info *vi, struct sk_buff *skb)
+static int receive_mergeable(struct receive_queue *rq, struct sk_buff *skb)
{
struct skb_vnet_hdr *hdr = skb_vnet_hdr(skb);
struct page *page;
@@ -244,7 +290,7 @@ static int receive_mergeable(struct virtnet_info *vi, struct sk_buff *skb)
skb->dev->stats.rx_length_errors++;
return -EINVAL;
}
- page = virtqueue_get_buf(vi->rvq, &len);
+ page = virtqueue_get_buf(rq->vq, &len);
if (!page) {
pr_debug("%s: rx error: %d buffers missing\n",
skb->dev->name, hdr->mhdr.num_buffers);
@@ -257,13 +303,14 @@ static int receive_mergeable(struct virtnet_info *vi, struct sk_buff *skb)
set_skb_frag(skb, page, 0, &len);
- --vi->num;
+ --rq->num;
}
return 0;
}
-static void receive_buf(struct net_device *dev, void *buf, unsigned int len)
+static void receive_buf(struct receive_queue *rq, void *buf, unsigned int len)
{
+ struct net_device *dev = rq->vi->dev;
struct virtnet_info *vi = netdev_priv(dev);
struct virtnet_stats *stats = this_cpu_ptr(vi->stats);
struct sk_buff *skb;
@@ -274,7 +321,7 @@ static void receive_buf(struct net_device *dev, void *buf, unsigned int len)
pr_debug("%s: short packet %i\n", dev->name, len);
dev->stats.rx_length_errors++;
if (vi->mergeable_rx_bufs || vi->big_packets)
- give_pages(vi, buf);
+ give_pages(rq, buf);
else
dev_kfree_skb(buf);
return;
@@ -286,14 +333,14 @@ static void receive_buf(struct net_device *dev, void *buf, unsigned int len)
skb_trim(skb, len);
} else {
page = buf;
- skb = page_to_skb(vi, page, len);
+ skb = page_to_skb(rq, page, len);
if (unlikely(!skb)) {
dev->stats.rx_dropped++;
- give_pages(vi, page);
+ give_pages(rq, page);
return;
}
if (vi->mergeable_rx_bufs)
- if (receive_mergeable(vi, skb)) {
+ if (receive_mergeable(rq, skb)) {
dev_kfree_skb(skb);
return;
}
@@ -363,90 +410,91 @@ frame_err:
dev_kfree_skb(skb);
}
-static int add_recvbuf_small(struct virtnet_info *vi, gfp_t gfp)
+static int add_recvbuf_small(struct receive_queue *rq, gfp_t gfp)
{
struct sk_buff *skb;
struct skb_vnet_hdr *hdr;
int err;
- skb = __netdev_alloc_skb_ip_align(vi->dev, MAX_PACKET_LEN, gfp);
+ skb = __netdev_alloc_skb_ip_align(rq->vi->dev, MAX_PACKET_LEN, gfp);
if (unlikely(!skb))
return -ENOMEM;
skb_put(skb, MAX_PACKET_LEN);
hdr = skb_vnet_hdr(skb);
- sg_set_buf(vi->rx_sg, &hdr->hdr, sizeof hdr->hdr);
+ sg_set_buf(rq->sg, &hdr->hdr, sizeof hdr->hdr);
+
+ skb_to_sgvec(skb, rq->sg + 1, 0, skb->len);
- skb_to_sgvec(skb, vi->rx_sg + 1, 0, skb->len);
+ err = virtqueue_add_buf(rq->vq, rq->sg, 0, 2, skb, gfp);
- err = virtqueue_add_buf(vi->rvq, vi->rx_sg, 0, 2, skb, gfp);
if (err < 0)
dev_kfree_skb(skb);
return err;
}
-static int add_recvbuf_big(struct virtnet_info *vi, gfp_t gfp)
+static int add_recvbuf_big(struct receive_queue *rq, gfp_t gfp)
{
struct page *first, *list = NULL;
char *p;
int i, err, offset;
- /* page in vi->rx_sg[MAX_SKB_FRAGS + 1] is list tail */
+ /* page in rq->sg[MAX_SKB_FRAGS + 1] is list tail */
for (i = MAX_SKB_FRAGS + 1; i > 1; --i) {
- first = get_a_page(vi, gfp);
+ first = get_a_page(rq, gfp);
if (!first) {
if (list)
- give_pages(vi, list);
+ give_pages(rq, list);
return -ENOMEM;
}
- sg_set_buf(&vi->rx_sg[i], page_address(first), PAGE_SIZE);
+ sg_set_buf(&rq->sg[i], page_address(first), PAGE_SIZE);
/* chain new page in list head to match sg */
first->private = (unsigned long)list;
list = first;
}
- first = get_a_page(vi, gfp);
+ first = get_a_page(rq, gfp);
if (!first) {
- give_pages(vi, list);
+ give_pages(rq, list);
return -ENOMEM;
}
p = page_address(first);
- /* vi->rx_sg[0], vi->rx_sg[1] share the same page */
- /* a separated vi->rx_sg[0] for virtio_net_hdr only due to QEMU bug */
- sg_set_buf(&vi->rx_sg[0], p, sizeof(struct virtio_net_hdr));
+ /* rq->sg[0], rq->sg[1] share the same page */
+ /* a separated rq->sg[0] for virtio_net_hdr only due to QEMU bug */
+ sg_set_buf(&rq->sg[0], p, sizeof(struct virtio_net_hdr));
- /* vi->rx_sg[1] for data packet, from offset */
+ /* rq->sg[1] for data packet, from offset */
offset = sizeof(struct padded_vnet_hdr);
- sg_set_buf(&vi->rx_sg[1], p + offset, PAGE_SIZE - offset);
+ sg_set_buf(&rq->sg[1], p + offset, PAGE_SIZE - offset);
/* chain first in list head */
first->private = (unsigned long)list;
- err = virtqueue_add_buf(vi->rvq, vi->rx_sg, 0, MAX_SKB_FRAGS + 2,
+ err = virtqueue_add_buf(rq->vq, rq->sg, 0, MAX_SKB_FRAGS + 2,
first, gfp);
if (err < 0)
- give_pages(vi, first);
+ give_pages(rq, first);
return err;
}
-static int add_recvbuf_mergeable(struct virtnet_info *vi, gfp_t gfp)
+static int add_recvbuf_mergeable(struct receive_queue *rq, gfp_t gfp)
{
struct page *page;
int err;
- page = get_a_page(vi, gfp);
+ page = get_a_page(rq, gfp);
if (!page)
return -ENOMEM;
- sg_init_one(vi->rx_sg, page_address(page), PAGE_SIZE);
+ sg_init_one(rq->sg, page_address(page), PAGE_SIZE);
- err = virtqueue_add_buf(vi->rvq, vi->rx_sg, 0, 1, page, gfp);
+ err = virtqueue_add_buf(rq->vq, rq->sg, 0, 1, page, gfp);
if (err < 0)
- give_pages(vi, page);
+ give_pages(rq, page);
return err;
}
@@ -458,97 +506,104 @@ static int add_recvbuf_mergeable(struct virtnet_info *vi, gfp_t gfp)
* before we're receiving packets, or from refill_work which is
* careful to disable receiving (using napi_disable).
*/
-static bool try_fill_recv(struct virtnet_info *vi, gfp_t gfp)
+static bool try_fill_recv(struct receive_queue *rq, gfp_t gfp)
{
+ struct virtnet_info *vi = rq->vi;
int err;
bool oom;
do {
if (vi->mergeable_rx_bufs)
- err = add_recvbuf_mergeable(vi, gfp);
+ err = add_recvbuf_mergeable(rq, gfp);
else if (vi->big_packets)
- err = add_recvbuf_big(vi, gfp);
+ err = add_recvbuf_big(rq, gfp);
else
- err = add_recvbuf_small(vi, gfp);
+ err = add_recvbuf_small(rq, gfp);
oom = err == -ENOMEM;
if (err < 0)
break;
- ++vi->num;
+ ++rq->num;
} while (err > 0);
- if (unlikely(vi->num > vi->max))
- vi->max = vi->num;
- virtqueue_kick(vi->rvq);
+ if (unlikely(rq->num > rq->max))
+ rq->max = rq->num;
+ virtqueue_kick(rq->vq);
return !oom;
}
-static void skb_recv_done(struct virtqueue *rvq)
+static void skb_recv_done(struct virtqueue *vq)
{
- struct virtnet_info *vi = rvq->vdev->priv;
+ struct virtnet_info *vi = vq->vdev->priv;
+ struct napi_struct *napi = &vi->rq[rxq_get_qnum(vi, vq)]->napi;
+
/* Schedule NAPI, Suppress further interrupts if successful. */
- if (napi_schedule_prep(&vi->napi)) {
- virtqueue_disable_cb(rvq);
- __napi_schedule(&vi->napi);
+ if (napi_schedule_prep(napi)) {
+ virtqueue_disable_cb(vq);
+ __napi_schedule(napi);
}
}
-static void virtnet_napi_enable(struct virtnet_info *vi)
+static void virtnet_napi_enable(struct receive_queue *rq)
{
- napi_enable(&vi->napi);
+ napi_enable(&rq->napi);
/* If all buffers were filled by other side before we napi_enabled, we
* won't get another interrupt, so process any outstanding packets
* now. virtnet_poll wants re-enable the queue, so we disable here.
* We synchronize against interrupts via NAPI_STATE_SCHED */
- if (napi_schedule_prep(&vi->napi)) {
- virtqueue_disable_cb(vi->rvq);
+ if (napi_schedule_prep(&rq->napi)) {
+ virtqueue_disable_cb(rq->vq);
local_bh_disable();
- __napi_schedule(&vi->napi);
+ __napi_schedule(&rq->napi);
local_bh_enable();
}
}
static void refill_work(struct work_struct *work)
{
- struct virtnet_info *vi;
+ struct napi_struct *napi;
+ struct receive_queue *rq;
bool still_empty;
- vi = container_of(work, struct virtnet_info, refill.work);
- napi_disable(&vi->napi);
- still_empty = !try_fill_recv(vi, GFP_KERNEL);
- virtnet_napi_enable(vi);
+ rq = container_of(work, struct receive_queue, refill.work);
+ napi = &rq->napi;
+
+ napi_disable(napi);
+ still_empty = !try_fill_recv(rq, GFP_KERNEL);
+ virtnet_napi_enable(rq);
/* In theory, this can happen: if we don't get any buffers in
* we will *never* try to fill again. */
if (still_empty)
- queue_delayed_work(system_nrt_wq, &vi->refill, HZ/2);
+ queue_delayed_work(system_nrt_wq, &rq->refill, HZ/2);
}
static int virtnet_poll(struct napi_struct *napi, int budget)
{
- struct virtnet_info *vi = container_of(napi, struct virtnet_info, napi);
+ struct receive_queue *rq = container_of(napi, struct receive_queue,
+ napi);
void *buf;
unsigned int len, received = 0;
again:
while (received < budget &&
- (buf = virtqueue_get_buf(vi->rvq, &len)) != NULL) {
- receive_buf(vi->dev, buf, len);
- --vi->num;
+ (buf = virtqueue_get_buf(rq->vq, &len)) != NULL) {
+ receive_buf(rq, buf, len);
+ --rq->num;
received++;
}
- if (vi->num < vi->max / 2) {
- if (!try_fill_recv(vi, GFP_ATOMIC))
- queue_delayed_work(system_nrt_wq, &vi->refill, 0);
+ if (rq->num < rq->max / 2) {
+ if (!try_fill_recv(rq, GFP_ATOMIC))
+ queue_delayed_work(system_nrt_wq, &rq->refill, 0);
}
/* Out of packets? */
if (received < budget) {
napi_complete(napi);
- if (unlikely(!virtqueue_enable_cb(vi->rvq)) &&
+ if (unlikely(!virtqueue_enable_cb(rq->vq)) &&
napi_schedule_prep(napi)) {
- virtqueue_disable_cb(vi->rvq);
+ virtqueue_disable_cb(rq->vq);
__napi_schedule(napi);
goto again;
}
@@ -557,13 +612,14 @@ again:
return received;
}
-static unsigned int free_old_xmit_skbs(struct virtnet_info *vi)
+static unsigned int free_old_xmit_skbs(struct virtnet_info *vi,
+ struct virtqueue *vq)
{
struct sk_buff *skb;
unsigned int len, tot_sgs = 0;
struct virtnet_stats *stats = this_cpu_ptr(vi->stats);
- while ((skb = virtqueue_get_buf(vi->svq, &len)) != NULL) {
+ while ((skb = virtqueue_get_buf(vq, &len)) != NULL) {
pr_debug("Sent skb %p\n", skb);
u64_stats_update_begin(&stats->tx_syncp);
@@ -577,7 +633,8 @@ static unsigned int free_old_xmit_skbs(struct virtnet_info *vi)
return tot_sgs;
}
-static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
+static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb,
+ struct virtqueue *vq, struct scatterlist *sg)
{
struct skb_vnet_hdr *hdr = skb_vnet_hdr(skb);
const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
@@ -615,44 +672,47 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
/* Encode metadata header at front. */
if (vi->mergeable_rx_bufs)
- sg_set_buf(vi->tx_sg, &hdr->mhdr, sizeof hdr->mhdr);
+ sg_set_buf(sg, &hdr->mhdr, sizeof hdr->mhdr);
else
- sg_set_buf(vi->tx_sg, &hdr->hdr, sizeof hdr->hdr);
+ sg_set_buf(sg, &hdr->hdr, sizeof hdr->hdr);
- hdr->num_sg = skb_to_sgvec(skb, vi->tx_sg + 1, 0, skb->len) + 1;
- return virtqueue_add_buf(vi->svq, vi->tx_sg, hdr->num_sg,
+ hdr->num_sg = skb_to_sgvec(skb, sg + 1, 0, skb->len) + 1;
+ return virtqueue_add_buf(vq, sg, hdr->num_sg,
0, skb, GFP_ATOMIC);
}
static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
+ int qnum = skb_get_queue_mapping(skb);
+ struct virtqueue *vq = vi->sq[qnum]->vq;
int capacity;
/* Free up any pending old buffers before queueing new ones. */
- free_old_xmit_skbs(vi);
+ free_old_xmit_skbs(vi, vq);
/* Try to transmit */
- capacity = xmit_skb(vi, skb);
+ capacity = xmit_skb(vi, skb, vq, vi->sq[qnum]->sg);
/* This can happen with OOM and indirect buffers. */
if (unlikely(capacity < 0)) {
if (likely(capacity == -ENOMEM)) {
if (net_ratelimit())
dev_warn(&dev->dev,
- "TX queue failure: out of memory\n");
+ "TXQ (%d) failure: out of memory\n",
+ qnum);
} else {
dev->stats.tx_fifo_errors++;
if (net_ratelimit())
dev_warn(&dev->dev,
- "Unexpected TX queue failure: %d\n",
- capacity);
+ "Unexpected TXQ (%d) failure: %d\n",
+ qnum, capacity);
}
dev->stats.tx_dropped++;
kfree_skb(skb);
return NETDEV_TX_OK;
}
- virtqueue_kick(vi->svq);
+ virtqueue_kick(vq);
/* Don't wait up for transmitted skbs to be freed. */
skb_orphan(skb);
@@ -661,13 +721,13 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)
/* Apparently nice girls don't return TX_BUSY; stop the queue
* before it gets out of hand. Naturally, this wastes entries. */
if (capacity < 2+MAX_SKB_FRAGS) {
- netif_stop_queue(dev);
- if (unlikely(!virtqueue_enable_cb_delayed(vi->svq))) {
+ netif_stop_subqueue(dev, qnum);
+ if (unlikely(!virtqueue_enable_cb_delayed(vq))) {
/* More just got used, free them then recheck. */
- capacity += free_old_xmit_skbs(vi);
+ capacity += free_old_xmit_skbs(vi, vq);
if (capacity >= 2+MAX_SKB_FRAGS) {
- netif_start_queue(dev);
- virtqueue_disable_cb(vi->svq);
+ netif_start_subqueue(dev, qnum);
+ virtqueue_disable_cb(vq);
}
}
}
@@ -700,7 +760,8 @@ static struct rtnl_link_stats64 *virtnet_stats(struct net_device *dev,
unsigned int start;
for_each_possible_cpu(cpu) {
- struct virtnet_stats *stats = per_cpu_ptr(vi->stats, cpu);
+ struct virtnet_stats __percpu *stats
+ = per_cpu_ptr(vi->stats, cpu);
u64 tpackets, tbytes, rpackets, rbytes;
do {
@@ -734,20 +795,26 @@ static struct rtnl_link_stats64 *virtnet_stats(struct net_device *dev,
static void virtnet_netpoll(struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
+ int i;
- napi_schedule(&vi->napi);
+ for (i = 0; i < vi->num_queue_pairs; i++)
+ napi_schedule(&vi->rq[i]->napi);
}
#endif
static int virtnet_open(struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
+ int i;
- /* Make sure we have some buffers: if oom use wq. */
- if (!try_fill_recv(vi, GFP_KERNEL))
- queue_delayed_work(system_nrt_wq, &vi->refill, 0);
+ for (i = 0; i < vi->num_queue_pairs; i++) {
+ /* Make sure we have some buffers: if oom use wq. */
+ if (!try_fill_recv(vi->rq[i], GFP_KERNEL))
+ queue_delayed_work(system_nrt_wq,
+ &vi->rq[i]->refill, 0);
+ virtnet_napi_enable(vi->rq[i]);
+ }
- virtnet_napi_enable(vi);
return 0;
}
@@ -809,10 +876,13 @@ static void virtnet_ack_link_announce(struct virtnet_info *vi)
static int virtnet_close(struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
+ int i;
/* Make sure refill_work doesn't re-enable napi! */
- cancel_delayed_work_sync(&vi->refill);
- napi_disable(&vi->napi);
+ for (i = 0; i < vi->num_queue_pairs; i++) {
+ cancel_delayed_work_sync(&vi->rq[i]->refill);
+ napi_disable(&vi->rq[i]->napi);
+ }
return 0;
}
@@ -924,11 +994,10 @@ static void virtnet_get_ringparam(struct net_device *dev,
{
struct virtnet_info *vi = netdev_priv(dev);
- ring->rx_max_pending = virtqueue_get_vring_size(vi->rvq);
- ring->tx_max_pending = virtqueue_get_vring_size(vi->svq);
+ ring->rx_max_pending = virtqueue_get_vring_size(vi->rq[0]->vq);
+ ring->tx_max_pending = virtqueue_get_vring_size(vi->sq[0]->vq);
ring->rx_pending = ring->rx_max_pending;
ring->tx_pending = ring->tx_max_pending;
-
}
@@ -961,6 +1030,19 @@ static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
return 0;
}
+/* To avoid contending a lock hold by a vcpu who would exit to host, select the
+ * txq based on the processor id.
+ */
+static u16 virtnet_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+ int txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) :
+ smp_processor_id();
+
+ while (unlikely(txq >= dev->real_num_tx_queues))
+ txq -= dev->real_num_tx_queues;
+ return txq;
+}
+
static const struct net_device_ops virtnet_netdev = {
.ndo_open = virtnet_open,
.ndo_stop = virtnet_close,
@@ -972,6 +1054,7 @@ static const struct net_device_ops virtnet_netdev = {
.ndo_get_stats64 = virtnet_stats,
.ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
+ .ndo_select_queue = virtnet_select_queue,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = virtnet_netpoll,
#endif
@@ -1007,10 +1090,10 @@ static void virtnet_config_changed_work(struct work_struct *work)
if (vi->status & VIRTIO_NET_S_LINK_UP) {
netif_carrier_on(vi->dev);
- netif_wake_queue(vi->dev);
+ netif_tx_wake_all_queues(vi->dev);
} else {
netif_carrier_off(vi->dev);
- netif_stop_queue(vi->dev);
+ netif_tx_stop_all_queues(vi->dev);
}
done:
mutex_unlock(&vi->config_lock);
@@ -1023,41 +1106,217 @@ static void virtnet_config_changed(struct virtio_device *vdev)
queue_work(system_nrt_wq, &vi->config_work);
}
-static int init_vqs(struct virtnet_info *vi)
+static void free_receive_bufs(struct virtnet_info *vi)
+{
+ int i;
+
+ for (i = 0; i < vi->num_queue_pairs; i++) {
+ while (vi->rq[i]->pages)
+ __free_pages(get_a_page(vi->rq[i], GFP_KERNEL), 0);
+ }
+}
+
+/* Free memory allocated for send and receive queues */
+static void virtnet_free_queues(struct virtnet_info *vi)
{
- struct virtqueue *vqs[3];
- vq_callback_t *callbacks[] = { skb_recv_done, skb_xmit_done, NULL};
- const char *names[] = { "input", "output", "control" };
- int nvqs, err;
+ int i;
- /* We expect two virtqueues, receive then send,
- * and optionally control. */
- nvqs = virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ) ? 3 : 2;
+ for (i = 0; i < vi->num_queue_pairs; i++) {
+ kfree(vi->rq[i]);
+ vi->rq[i] = NULL;
+ kfree(vi->sq[i]);
+ vi->sq[i] = NULL;
+ }
+}
- err = vi->vdev->config->find_vqs(vi->vdev, nvqs, vqs, callbacks, names);
- if (err)
- return err;
+static void free_unused_bufs(struct virtnet_info *vi)
+{
+ void *buf;
+ int i;
+
+ for (i = 0; i < vi->num_queue_pairs; i++) {
+ struct virtqueue *vq = vi->sq[i]->vq;
+
+ while ((buf = virtqueue_detach_unused_buf(vq)) != NULL)
+ dev_kfree_skb(buf);
+ }
+
+ for (i = 0; i < vi->num_queue_pairs; i++) {
+ struct virtqueue *vq = vi->rq[i]->vq;
+
+ while ((buf = virtqueue_detach_unused_buf(vq)) != NULL) {
+ if (vi->mergeable_rx_bufs || vi->big_packets)
+ give_pages(vi->rq[i], buf);
+ else
+ dev_kfree_skb(buf);
+ --vi->rq[i]->num;
+ }
+ BUG_ON(vi->rq[i]->num != 0);
+ }
+}
+
+static void virtnet_set_affinity(struct virtnet_info *vi, bool set)
+{
+ int i;
+
+ if (vi->num_queue_pairs == 1)
+ return;
+
+ for (i = 0; i < vi->num_queue_pairs; i++) {
+ int cpu = set ? i : -1;
+ virtqueue_set_affinity(vi->rq[i]->vq, cpu);
+ virtqueue_set_affinity(vi->sq[i]->vq, cpu);
+ }
+ return;
+}
+
+static void virtnet_del_vqs(struct virtnet_info *vi)
+{
+ struct virtio_device *vdev = vi->vdev;
+
+ virtnet_set_affinity(vi, false);
+
+ vdev->config->del_vqs(vdev);
+
+ virtnet_free_queues(vi);
+}
+
+static int virtnet_find_vqs(struct virtnet_info *vi)
+{
+ vq_callback_t **callbacks;
+ struct virtqueue **vqs;
+ int ret = -ENOMEM;
+ int i, total_vqs;
+ char **names;
- vi->rvq = vqs[0];
- vi->svq = vqs[1];
+ /*
+ * We expect 1 RX virtqueue followed by 1 TX virtqueue, followd by
+ * possible control virtqueue and followed by the same
+ * 'vi->num_queue_pairs-1' more times
+ */
+ total_vqs = vi->num_queue_pairs * 2 +
+ virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ);
+
+ /* Allocate space for find_vqs parameters */
+ vqs = kmalloc(total_vqs * sizeof(*vqs), GFP_KERNEL);
+ callbacks = kmalloc(total_vqs * sizeof(*callbacks), GFP_KERNEL);
+ names = kmalloc(total_vqs * sizeof(*names), GFP_KERNEL);
+ if (!vqs || !callbacks || !names)
+ goto err;
+
+ /* Parameters for control virtqueue, if any */
+ if (vi->has_cvq) {
+ callbacks[2] = NULL;
+ names[2] = "control";
+ }
+
+ /* Allocate/initialize parameters for send/receive virtqueues */
+ for (i = 0; i < vi->num_queue_pairs * 2; i += 2) {
+ int j = (i == 0 ? i : i + vi->has_cvq);
+ callbacks[j] = skb_recv_done;
+ callbacks[j + 1] = skb_xmit_done;
+ names[j] = kasprintf(GFP_KERNEL, "input.%d", i / 2);
+ names[j + 1] = kasprintf(GFP_KERNEL, "output.%d", i / 2);
+ }
- if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) {
+ ret = vi->vdev->config->find_vqs(vi->vdev, total_vqs, vqs, callbacks,
+ (const char **)names);
+ if (ret)
+ goto err;
+
+ if (vi->has_cvq)
vi->cvq = vqs[2];
- if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VLAN))
- vi->dev->features |= NETIF_F_HW_VLAN_FILTER;
+ for (i = 0; i < vi->num_queue_pairs * 2; i += 2) {
+ int j = i == 0 ? i : i + vi->has_cvq;
+ vi->rq[i / 2]->vq = vqs[j];
+ vi->sq[i / 2]->vq = vqs[j + 1];
}
- return 0;
+
+err:
+ if (ret && names)
+ for (i = 0; i < vi->num_queue_pairs * 2; i++)
+ kfree(names[i]);
+
+ kfree(names);
+ kfree(callbacks);
+ kfree(vqs);
+
+ return ret;
+}
+
+static int virtnet_alloc_queues(struct virtnet_info *vi)
+{
+ int ret = -ENOMEM;
+ int i;
+
+ for (i = 0; i < vi->num_queue_pairs; i++) {
+ vi->rq[i] = kzalloc(sizeof(*vi->rq[i]), GFP_KERNEL);
+ vi->sq[i] = kzalloc(sizeof(*vi->sq[i]), GFP_KERNEL);
+ if (!vi->rq[i] || !vi->sq[i])
+ goto err;
+ }
+
+ ret = 0;
+
+ /* setup initial receive and send queue parameters */
+ for (i = 0; i < vi->num_queue_pairs; i++) {
+ vi->rq[i]->vi = vi;
+ vi->rq[i]->pages = NULL;
+ INIT_DELAYED_WORK(&vi->rq[i]->refill, refill_work);
+ netif_napi_add(vi->dev, &vi->rq[i]->napi, virtnet_poll,
+ napi_weight);
+
+ sg_init_table(vi->rq[i]->sg, ARRAY_SIZE(vi->rq[i]->sg));
+ sg_init_table(vi->sq[i]->sg, ARRAY_SIZE(vi->sq[i]->sg));
+ }
+
+err:
+ if (ret)
+ virtnet_free_queues(vi);
+
+ return ret;
+}
+
+static int virtnet_setup_vqs(struct virtnet_info *vi)
+{
+ int ret;
+
+ /* Allocate send & receive queues */
+ ret = virtnet_alloc_queues(vi);
+ if (!ret) {
+ ret = virtnet_find_vqs(vi);
+ if (ret)
+ virtnet_free_queues(vi);
+ else
+ virtnet_set_affinity(vi, true);
+ }
+
+ return ret;
}
static int virtnet_probe(struct virtio_device *vdev)
{
- int err;
+ int i, err;
struct net_device *dev;
struct virtnet_info *vi;
+ u16 num_queues, num_queue_pairs;
+
+ /* Find if host supports multiqueue virtio_net device */
+ err = virtio_config_val(vdev, VIRTIO_NET_F_MULTIQUEUE,
+ offsetof(struct virtio_net_config,
+ num_queues), &num_queues);
+
+ /* We need atleast 2 queue's */
+ if (err || num_queues < 2)
+ num_queues = 2;
+ if (num_queues > MAX_QUEUES * 2)
+ num_queues = MAX_QUEUES;
+
+ num_queue_pairs = num_queues / 2;
/* Allocate ourselves a network device with room for our info */
- dev = alloc_etherdev(sizeof(struct virtnet_info));
+ dev = alloc_etherdev_mq(sizeof(struct virtnet_info), num_queue_pairs);
if (!dev)
return -ENOMEM;
@@ -1103,22 +1362,18 @@ static int virtnet_probe(struct virtio_device *vdev)
/* Set up our device-specific information */
vi = netdev_priv(dev);
- netif_napi_add(dev, &vi->napi, virtnet_poll, napi_weight);
vi->dev = dev;
vi->vdev = vdev;
vdev->priv = vi;
- vi->pages = NULL;
vi->stats = alloc_percpu(struct virtnet_stats);
err = -ENOMEM;
if (vi->stats == NULL)
- goto free;
+ goto free_netdev;
- INIT_DELAYED_WORK(&vi->refill, refill_work);
mutex_init(&vi->config_lock);
vi->config_enable = true;
INIT_WORK(&vi->config_work, virtnet_config_changed_work);
- sg_init_table(vi->rx_sg, ARRAY_SIZE(vi->rx_sg));
- sg_init_table(vi->tx_sg, ARRAY_SIZE(vi->tx_sg));
+ vi->num_queue_pairs = num_queue_pairs;
/* If we can receive ANY GSO packets, we must allocate large ones. */
if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||
@@ -1129,9 +1384,17 @@ static int virtnet_probe(struct virtio_device *vdev)
if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))
vi->mergeable_rx_bufs = true;
- err = init_vqs(vi);
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ))
+ vi->has_cvq = true;
+
+ /* Allocate/initialize the rx/tx queues, and invoke find_vqs */
+ err = virtnet_setup_vqs(vi);
if (err)
- goto free_stats;
+ goto free_netdev;
+
+ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ) &&
+ virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VLAN))
+ dev->features |= NETIF_F_HW_VLAN_FILTER;
err = register_netdev(dev);
if (err) {
@@ -1140,12 +1403,15 @@ static int virtnet_probe(struct virtio_device *vdev)
}
/* Last of all, set up some receive buffers. */
- try_fill_recv(vi, GFP_KERNEL);
-
- /* If we didn't even get one input buffer, we're useless. */
- if (vi->num == 0) {
- err = -ENOMEM;
- goto unregister;
+ for (i = 0; i < num_queue_pairs; i++) {
+ try_fill_recv(vi->rq[i], GFP_KERNEL);
+
+ /* If we didn't even get one input buffer, we're useless. */
+ if (vi->rq[i]->num == 0) {
+ free_unused_bufs(vi);
+ err = -ENOMEM;
+ goto free_recv_bufs;
+ }
}
/* Assume link up if device can't report link status,
@@ -1158,42 +1424,25 @@ static int virtnet_probe(struct virtio_device *vdev)
netif_carrier_on(dev);
}
- pr_debug("virtnet: registered device %s\n", dev->name);
+ pr_debug("virtnet: registered device %s with %d RX and TX vq's\n",
+ dev->name, num_queue_pairs);
+
return 0;
-unregister:
+free_recv_bufs:
+ free_receive_bufs(vi);
unregister_netdev(dev);
+
free_vqs:
- vdev->config->del_vqs(vdev);
-free_stats:
- free_percpu(vi->stats);
-free:
+ for (i = 0; i < num_queue_pairs; i++)
+ cancel_delayed_work_sync(&vi->rq[i]->refill);
+ virtnet_del_vqs(vi);
+
+free_netdev:
free_netdev(dev);
return err;
}
-static void free_unused_bufs(struct virtnet_info *vi)
-{
- void *buf;
- while (1) {
- buf = virtqueue_detach_unused_buf(vi->svq);
- if (!buf)
- break;
- dev_kfree_skb(buf);
- }
- while (1) {
- buf = virtqueue_detach_unused_buf(vi->rvq);
- if (!buf)
- break;
- if (vi->mergeable_rx_bufs || vi->big_packets)
- give_pages(vi, buf);
- else
- dev_kfree_skb(buf);
- --vi->num;
- }
- BUG_ON(vi->num != 0);
-}
-
static void remove_vq_common(struct virtnet_info *vi)
{
vi->vdev->config->reset(vi->vdev);
@@ -1201,10 +1450,9 @@ static void remove_vq_common(struct virtnet_info *vi)
/* Free unused buffers in both send and recv, if any. */
free_unused_bufs(vi);
- vi->vdev->config->del_vqs(vi->vdev);
+ free_receive_bufs(vi);
- while (vi->pages)
- __free_pages(get_a_page(vi, GFP_KERNEL), 0);
+ virtnet_del_vqs(vi);
}
static void __devexit virtnet_remove(struct virtio_device *vdev)
@@ -1230,6 +1478,7 @@ static void __devexit virtnet_remove(struct virtio_device *vdev)
static int virtnet_freeze(struct virtio_device *vdev)
{
struct virtnet_info *vi = vdev->priv;
+ int i;
/* Prevent config work handler from accessing the device */
mutex_lock(&vi->config_lock);
@@ -1237,10 +1486,13 @@ static int virtnet_freeze(struct virtio_device *vdev)
mutex_unlock(&vi->config_lock);
netif_device_detach(vi->dev);
- cancel_delayed_work_sync(&vi->refill);
+ for (i = 0; i < vi->num_queue_pairs; i++)
+ cancel_delayed_work_sync(&vi->rq[i]->refill);
if (netif_running(vi->dev))
- napi_disable(&vi->napi);
+ for (i = 0; i < vi->num_queue_pairs; i++)
+ napi_disable(&vi->rq[i]->napi);
+
remove_vq_common(vi);
@@ -1252,19 +1504,22 @@ static int virtnet_freeze(struct virtio_device *vdev)
static int virtnet_restore(struct virtio_device *vdev)
{
struct virtnet_info *vi = vdev->priv;
- int err;
+ int err, i;
- err = init_vqs(vi);
+ err = virtnet_setup_vqs(vi);
if (err)
return err;
if (netif_running(vi->dev))
- virtnet_napi_enable(vi);
+ for (i = 0; i < vi->num_queue_pairs; i++)
+ virtnet_napi_enable(vi->rq[i]);
netif_device_attach(vi->dev);
- if (!try_fill_recv(vi, GFP_KERNEL))
- queue_delayed_work(system_nrt_wq, &vi->refill, 0);
+ for (i = 0; i < vi->num_queue_pairs; i++)
+ if (!try_fill_recv(vi->rq[i], GFP_KERNEL))
+ queue_delayed_work(system_nrt_wq,
+ &vi->rq[i]->refill, 0);
mutex_lock(&vi->config_lock);
vi->config_enable = true;
@@ -1287,7 +1542,7 @@ static unsigned int features[] = {
VIRTIO_NET_F_GUEST_ECN, VIRTIO_NET_F_GUEST_UFO,
VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
- VIRTIO_NET_F_GUEST_ANNOUNCE,
+ VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MULTIQUEUE,
};
static struct virtio_driver virtio_net_driver = {
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 1bc7e30..60f09ff 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -61,6 +61,8 @@ struct virtio_net_config {
__u8 mac[6];
/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
__u16 status;
+ /* Total number of RX/TX queues */
+ __u16 num_queues;
} __attribute__((packed));
/* This is the first element of the scatter-gather list. If you don't
--
1.7.1
^ permalink raw reply related
* [net-next RFC V5 3/5] virtio: intorduce an API to set affinity for a virtqueue
From: Jason Wang @ 2012-07-05 10:29 UTC (permalink / raw)
To: mst, mashirle, krkumar2, habanero, rusty, netdev, linux-kernel,
virtualization, edumazet, tahm, jwhan, davem
Cc: kvm, sri
In-Reply-To: <1341484194-8108-1-git-send-email-jasowang@redhat.com>
Sometimes, virtio device need to configure irq affiniry hint to maximize the
performance. Instead of just exposing the irq of a virtqueue, this patch
introduce an API to set the affinity for a virtqueue.
The api is best-effort, the affinity hint may not be set as expected due to
platform support, irq sharing or irq type. Currently, only pci method were
implemented and we set the affinity according to:
- if device uses INTX, we just ignore the request
- if device has per vq vector, we force the affinity hint
- if the virtqueues share MSI, make the affinity OR over all affinities
requested
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
drivers/virtio/virtio_pci.c | 46 +++++++++++++++++++++++++++++++++++++++++
include/linux/virtio_config.h | 21 ++++++++++++++++++
2 files changed, 67 insertions(+), 0 deletions(-)
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index adb24f2..2ff0451 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -48,6 +48,7 @@ struct virtio_pci_device
int msix_enabled;
int intx_enabled;
struct msix_entry *msix_entries;
+ cpumask_var_t *msix_affinity_masks;
/* Name strings for interrupts. This size should be enough,
* and I'm too lazy to allocate each name separately. */
char (*msix_names)[256];
@@ -276,6 +277,10 @@ static void vp_free_vectors(struct virtio_device *vdev)
for (i = 0; i < vp_dev->msix_used_vectors; ++i)
free_irq(vp_dev->msix_entries[i].vector, vp_dev);
+ for (i = 0; i < vp_dev->msix_vectors; i++)
+ if (vp_dev->msix_affinity_masks[i])
+ free_cpumask_var(vp_dev->msix_affinity_masks[i]);
+
if (vp_dev->msix_enabled) {
/* Disable the vector used for configuration */
iowrite16(VIRTIO_MSI_NO_VECTOR,
@@ -293,6 +298,8 @@ static void vp_free_vectors(struct virtio_device *vdev)
vp_dev->msix_names = NULL;
kfree(vp_dev->msix_entries);
vp_dev->msix_entries = NULL;
+ kfree(vp_dev->msix_affinity_masks);
+ vp_dev->msix_affinity_masks = NULL;
}
static int vp_request_msix_vectors(struct virtio_device *vdev, int nvectors,
@@ -311,6 +318,15 @@ static int vp_request_msix_vectors(struct virtio_device *vdev, int nvectors,
GFP_KERNEL);
if (!vp_dev->msix_names)
goto error;
+ vp_dev->msix_affinity_masks
+ = kzalloc(nvectors * sizeof *vp_dev->msix_affinity_masks,
+ GFP_KERNEL);
+ if (!vp_dev->msix_affinity_masks)
+ goto error;
+ for (i = 0; i < nvectors; ++i)
+ if (!alloc_cpumask_var(&vp_dev->msix_affinity_masks[i],
+ GFP_KERNEL))
+ goto error;
for (i = 0; i < nvectors; ++i)
vp_dev->msix_entries[i].entry = i;
@@ -607,6 +623,35 @@ static const char *vp_bus_name(struct virtio_device *vdev)
return pci_name(vp_dev->pci_dev);
}
+/* Setup the affinity for a virtqueue:
+ * - force the affinity for per vq vector
+ * - OR over all affinities for shared MSI
+ * - ignore the affinity request if we're using INTX
+ */
+static int vp_set_vq_affinity(struct virtqueue *vq, int cpu)
+{
+ struct virtio_device *vdev = vq->vdev;
+ struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+ struct virtio_pci_vq_info *info = vq->priv;
+ struct cpumask *mask;
+ unsigned int irq;
+
+ if (!vq->callback)
+ return -EINVAL;
+
+ if (vp_dev->msix_enabled) {
+ mask = vp_dev->msix_affinity_masks[info->msix_vector];
+ irq = vp_dev->msix_entries[info->msix_vector].vector;
+ if (cpu == -1)
+ irq_set_affinity_hint(irq, NULL);
+ else {
+ cpumask_set_cpu(cpu, mask);
+ irq_set_affinity_hint(irq, mask);
+ }
+ }
+ return 0;
+}
+
static struct virtio_config_ops virtio_pci_config_ops = {
.get = vp_get,
.set = vp_set,
@@ -618,6 +663,7 @@ static struct virtio_config_ops virtio_pci_config_ops = {
.get_features = vp_get_features,
.finalize_features = vp_finalize_features,
.bus_name = vp_bus_name,
+ .set_vq_affinity = vp_set_vq_affinity,
};
static void virtio_pci_release_dev(struct device *_d)
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index fc457f4..2c4a989 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -98,6 +98,7 @@
* vdev: the virtio_device
* This returns a pointer to the bus name a la pci_name from which
* the caller can then copy.
+ * @set_vq_affinity: set the affinity for a virtqueue.
*/
typedef void vq_callback_t(struct virtqueue *);
struct virtio_config_ops {
@@ -116,6 +117,7 @@ struct virtio_config_ops {
u32 (*get_features)(struct virtio_device *vdev);
void (*finalize_features)(struct virtio_device *vdev);
const char *(*bus_name)(struct virtio_device *vdev);
+ int (*set_vq_affinity)(struct virtqueue *vq, int cpu);
};
/* If driver didn't advertise the feature, it will never appear. */
@@ -190,5 +192,24 @@ const char *virtio_bus_name(struct virtio_device *vdev)
return vdev->config->bus_name(vdev);
}
+/**
+ * virtqueue_set_affinity - setting affinity for a virtqueue
+ * @vq: the virtqueue
+ * @cpu: the cpu no.
+ *
+ * Pay attention the function are best-effort: the affinity hint may not be set
+ * due to config support, irq type and sharing.
+ *
+ */
+static inline
+int virtqueue_set_affinity(struct virtqueue *vq, int cpu)
+{
+ struct virtio_device *vdev = vq->vdev;
+ if (vdev->config->set_vq_affinity)
+ return vdev->config->set_vq_affinity(vq, cpu);
+ return 0;
+}
+
+
#endif /* __KERNEL__ */
#endif /* _LINUX_VIRTIO_CONFIG_H */
--
1.7.1
^ permalink raw reply related
* [net-next RFC V5 2/5] virtio_ring: move queue_index to vring_virtqueue
From: Jason Wang @ 2012-07-05 10:29 UTC (permalink / raw)
To: mst, mashirle, krkumar2, habanero, rusty, netdev, linux-kernel,
virtualization, edumazet, tahm, jwhan, davem
Cc: kvm, sri
In-Reply-To: <1341484194-8108-1-git-send-email-jasowang@redhat.com>
Instead of storing the queue index in virtio infos, this patch moves them to
vring_virtqueue and introduces helpers to set and get the value. This would
simplify the management and tracing.
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
drivers/virtio/virtio_mmio.c | 5 +----
drivers/virtio/virtio_pci.c | 12 +++++-------
drivers/virtio/virtio_ring.c | 17 +++++++++++++++++
include/linux/virtio.h | 4 ++++
4 files changed, 27 insertions(+), 11 deletions(-)
diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index 453db0c..f5432b6 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -131,9 +131,6 @@ struct virtio_mmio_vq_info {
/* the number of entries in the queue */
unsigned int num;
- /* the index of the queue */
- int queue_index;
-
/* the virtual address of the ring queue */
void *queue;
@@ -324,7 +321,6 @@ static struct virtqueue *vm_setup_vq(struct virtio_device *vdev, unsigned index,
err = -ENOMEM;
goto error_kmalloc;
}
- info->queue_index = index;
/* Allocate pages for the queue - start with a queue as big as
* possible (limited by maximum size allowed by device), drop down
@@ -363,6 +359,7 @@ static struct virtqueue *vm_setup_vq(struct virtio_device *vdev, unsigned index,
goto error_new_virtqueue;
}
+ virtqueue_set_queue_index(vq, index);
vq->priv = info;
info->vq = vq;
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 2e03d41..adb24f2 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -79,9 +79,6 @@ struct virtio_pci_vq_info
/* the number of entries in the queue */
int num;
- /* the index of the queue */
- int queue_index;
-
/* the virtual address of the ring queue */
void *queue;
@@ -202,11 +199,11 @@ static void vp_reset(struct virtio_device *vdev)
static void vp_notify(struct virtqueue *vq)
{
struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
- struct virtio_pci_vq_info *info = vq->priv;
/* we write the queue's selector into the notification register to
* signal the other end */
- iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY);
+ iowrite16(virtqueue_get_queue_index(vq),
+ vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY);
}
/* Handle a configuration change: Tell driver if it wants to know. */
@@ -402,7 +399,6 @@ static struct virtqueue *setup_vq(struct virtio_device *vdev, unsigned index,
if (!info)
return ERR_PTR(-ENOMEM);
- info->queue_index = index;
info->num = num;
info->msix_vector = msix_vec;
@@ -425,6 +421,7 @@ static struct virtqueue *setup_vq(struct virtio_device *vdev, unsigned index,
goto out_activate_queue;
}
+ virtqueue_set_queue_index(vq, index);
vq->priv = info;
info->vq = vq;
@@ -467,7 +464,8 @@ static void vp_del_vq(struct virtqueue *vq)
list_del(&info->node);
spin_unlock_irqrestore(&vp_dev->lock, flags);
- iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
+ iowrite16(virtqueue_get_queue_index(vq),
+ vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
if (vp_dev->msix_enabled) {
iowrite16(VIRTIO_MSI_NO_VECTOR,
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 5aa43c3..9c5aeea 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -106,6 +106,9 @@ struct vring_virtqueue
/* How to notify other side. FIXME: commonalize hcalls! */
void (*notify)(struct virtqueue *vq);
+ /* Index of the queue */
+ int queue_index;
+
#ifdef DEBUG
/* They're supposed to lock for us. */
unsigned int in_use;
@@ -171,6 +174,20 @@ static int vring_add_indirect(struct vring_virtqueue *vq,
return head;
}
+void virtqueue_set_queue_index(struct virtqueue *_vq, int queue_index)
+{
+ struct vring_virtqueue *vq = to_vvq(_vq);
+ vq->queue_index = queue_index;
+}
+EXPORT_SYMBOL_GPL(virtqueue_set_queue_index);
+
+int virtqueue_get_queue_index(struct virtqueue *_vq)
+{
+ struct vring_virtqueue *vq = to_vvq(_vq);
+ return vq->queue_index;
+}
+EXPORT_SYMBOL_GPL(virtqueue_get_queue_index);
+
/**
* virtqueue_add_buf - expose buffer to other end
* @vq: the struct virtqueue we're talking about.
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index 8efd28a..0d8ed46 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -50,6 +50,10 @@ void *virtqueue_detach_unused_buf(struct virtqueue *vq);
unsigned int virtqueue_get_vring_size(struct virtqueue *vq);
+void virtqueue_set_queue_index(struct virtqueue *vq, int queue_index);
+
+int virtqueue_get_queue_index(struct virtqueue *vq);
+
/**
* virtio_device - representation of a device using virtio
* @index: unique position on the virtio bus
--
1.7.1
^ permalink raw reply related
* [net-next RFC V5 1/5] virtio_net: Introduce VIRTIO_NET_F_MULTIQUEUE
From: Jason Wang @ 2012-07-05 10:29 UTC (permalink / raw)
To: mst, mashirle, krkumar2, habanero, rusty, netdev, linux-kernel,
virtualization, edumazet, tahm, jwhan, davem
Cc: kvm, sri
In-Reply-To: <1341484194-8108-1-git-send-email-jasowang@redhat.com>
From: Krishna Kumar <krkumar2@in.ibm.com>
Introduce VIRTIO_NET_F_MULTIQUEUE.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
include/linux/virtio_net.h | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 2470f54..1bc7e30 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -51,6 +51,7 @@
#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the
* network */
+#define VIRTIO_NET_F_MULTIQUEUE 22 /* Device supports multiple TXQ/RXQ */
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
--
1.7.1
^ permalink raw reply related
* [net-next RFC V5 0/5] Multiqueue virtio-net
From: Jason Wang @ 2012-07-05 10:29 UTC (permalink / raw)
To: mst, mashirle, krkumar2, habanero, rusty, netdev, linux-kernel,
virtualization, edumazet, tahm, jwhan, davem
Cc: kvm, sri
Hello All:
This series is an update version of multiqueue virtio-net driver based on
Krishna Kumar's work to let virtio-net use multiple rx/tx queues to do the
packets reception and transmission. Please review and comments.
Test Environment:
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 8 cores 2 numa nodes
- Two directed connected 82599
Test Summary:
- Highlights: huge improvements on TCP_RR test
- Lowlights: regression on small packet transmission, higher cpu utilization
than single queue, need further optimization
Analysis of the performance result:
- I count the number of packets sending/receiving during the test, and
multiqueue show much more ability in terms of packets per second.
- For the tx regression, multiqueue send about 1-2 times of more packets
compared to single queue, and the packets size were much smaller than single
queue does. I suspect tcp does less batching in multiqueue, so I hack the
tcp_write_xmit() to forece more batching, multiqueue works as well as
singlequeue for both small transmission and throughput
- I didn't pack the accelerate RFS with virtio-net in this sereis as it still
need further shaping, for the one that interested in this please see:
http://www.mail-archive.com/kvm@vger.kernel.org/msg64111.html
Changes from V4:
- Add ability to negotiate the number of queues through control virtqueue
- Ethtool -{L|l} support and default the tx/rx queue number to 1
- Expose the API to set irq affinity instead of irq itself
Changes from V3:
- Rebase to the net-next
- Let queue 2 to be the control virtqueue to obey the spec
- Prodives irq affinity
- Choose txq based on processor id
References:
- V4: https://lkml.org/lkml/2012/6/25/120
- V3: http://lwn.net/Articles/467283/
Test result:
1) 1 vm 2 vcpu 1q vs 2q, 1 - 1q, 2 - 2q, no pinning
- Guest to External Host TCP STREAM
sessions size throughput1 throughput2 norm1 norm2
1 64 650.55 655.61 100% 24.88 24.86 99%
2 64 1446.81 1309.44 90% 30.49 27.16 89%
4 64 1430.52 1305.59 91% 30.78 26.80 87%
8 64 1450.89 1270.82 87% 30.83 25.95 84%
1 256 1699.45 1779.58 104% 56.75 59.08 104%
2 256 4902.71 3446.59 70% 98.53 62.78 63%
4 256 4803.76 2980.76 62% 97.44 54.68 56%
8 256 5128.88 3158.74 61% 104.68 58.61 55%
1 512 2837.98 2838.42 100% 89.76 90.41 100%
2 512 6742.59 5495.83 81% 155.03 99.07 63%
4 512 9193.70 5900.17 64% 202.84 106.44 52%
8 512 9287.51 7107.79 76% 202.18 129.08 63%
1 1024 4166.42 4224.98 101% 128.55 129.86 101%
2 1024 6196.94 7823.08 126% 181.80 168.81 92%
4 1024 9113.62 9219.49 101% 235.15 190.93 81%
8 1024 9324.25 9402.66 100% 239.10 179.99 75%
1 2048 7441.63 6534.04 87% 248.01 215.63 86%
2 2048 7024.61 7414.90 105% 225.79 219.62 97%
4 2048 8971.49 9269.00 103% 278.94 220.84 79%
8 2048 9314.20 9359.96 100% 268.36 192.23 71%
1 4096 8282.60 8990.08 108% 277.45 320.05 115%
2 4096 9194.80 9293.78 101% 317.02 248.76 78%
4 4096 9340.73 9313.19 99% 300.34 230.35 76%
8 4096 9148.23 9347.95 102% 279.49 199.43 71%
1 16384 8787.89 8766.31 99% 312.38 316.53 101%
2 16384 9306.35 9156.14 98% 319.53 279.83 87%
4 16384 9177.81 9307.50 101% 312.69 230.07 73%
8 16384 9035.82 9188.00 101% 298.32 199.17 66%
- TCP RR
sessions size throughput1 throughput2 norm1 norm2
50 1 54695.41 84164.98 153% 1957.33 1901.31 97%
100 1 60141.88 88598.94 147% 2157.90 2000.45 92%
250 1 74763.56 135584.22 181% 2541.94 2628.59 103%
50 64 51628.38 82867.50 160% 1872.55 1812.16 96%
100 64 60367.73 84080.60 139% 2215.69 1867.69 84%
250 64 68502.70 124910.59 182% 2321.43 2495.76 107%
50 128 53477.08 77625.07 145% 1905.10 1870.99 98%
100 128 59697.56 74902.37 125% 2230.66 1751.03 78%
250 128 71248.74 133963.55 188% 2453.12 2711.72 110%
50 256 47663.86 67742.63 142% 1880.45 1735.30 92%
100 256 54051.84 68738.57 127% 2123.03 1778.59 83%
250 256 68250.06 124487.90 182% 2321.89 2598.60 111%
- External Host to Guest TCP STRAM
sessions size throughput1 throughput2 norm1 norm2
1 64 847.71 864.83 102% 57.99 57.93 99%
2 64 1690.82 1544.94 91% 80.13 55.09 68%
4 64 3434.98 3455.53 100% 127.17 89.00 69%
8 64 5890.19 6557.35 111% 194.70 146.52 75%
1 256 2094.04 2109.14 100% 130.73 127.14 97%
2 256 5218.13 3731.97 71% 219.15 114.02 52%
4 256 6734.51 9213.47 136% 227.87 208.31 91%
8 256 6452.86 9402.78 145% 224.83 207.77 92%
1 512 3945.07 4203.68 106% 279.72 273.30 97%
2 512 7878.96 8122.55 103% 278.25 231.71 83%
4 512 7645.89 9402.13 122% 252.10 217.42 86%
8 512 6657.06 9403.71 141% 239.81 214.89 89%
1 1024 5729.06 5111.21 89% 289.38 303.09 104%
2 1024 8097.27 8159.67 100% 269.29 242.97 90%
4 1024 7778.93 8919.02 114% 261.28 205.50 78%
8 1024 6458.02 9360.02 144% 221.26 208.09 94%
1 2048 6426.94 5195.59 80% 292.52 307.47 105%
2 2048 8221.90 9025.66 109% 283.80 242.25 85%
4 2048 7364.72 8527.79 115% 248.10 198.36 79%
8 2048 6760.63 9161.07 135% 230.53 205.12 88%
1 4096 7247.02 6874.21 94% 276.23 287.68 104%
2 4096 8346.04 8818.65 105% 281.49 254.81 90%
4 4096 6710.00 9354.59 139% 216.41 210.13 97%
8 4096 6265.69 9406.87 150% 206.69 210.92 102%
1 16384 8159.50 8048.79 98% 266.94 283.11 106%
2 16384 8525.66 8552.41 100% 294.36 239.27 81%
4 16384 6042.24 8447.86 139% 200.21 196.40 98%
8 16384 6432.63 9403.49 146% 211.48 206.13 97%
2) 1 vm 4 vcpu 1q vs 4q, 1 - 1q, 2 - 4q, no pinning
- Guest to External Host TCP STREAM
sessions size throughput1 throughput2 norm1 norm2
1 64 636.93 657.69 103% 23.55 24.42 103%
2 64 1457.46 1268.78 87% 30.97 26.02 84%
4 64 3062.86 2302.43 75% 41.00 29.64 72%
8 64 3107.68 2308.32 74% 41.62 29.07 69%
1 256 1743.50 1750.11 100% 59.00 56.63 95%
2 256 4582.61 2870.31 62% 92.47 51.97 56%
4 256 8440.96 4795.37 56% 135.10 56.39 41%
8 256 9240.31 6654.82 72% 144.76 74.89 51%
1 512 2918.25 2735.26 93% 91.08 86.47 94%
2 512 8978.32 5107.95 56% 200.00 94.97 47%
4 512 8850.39 6864.37 77% 190.32 101.09 53%
8 512 9270.30 8483.01 91% 193.44 118.73 61%
1 1024 4416.10 3679.70 83% 135.54 110.63 81%
2 1024 9085.20 8770.48 96% 242.23 175.59 72%
4 1024 9158.57 9011.56 98% 234.39 159.17 67%
8 1024 9345.89 9067.43 97% 233.35 138.73 59%
1 2048 8455.19 6077.94 71% 338.52 190.16 56%
2 2048 9223.32 8237.73 89% 270.00 198.27 73%
4 2048 9080.75 9257.63 101% 261.30 172.80 66%
8 2048 9177.39 8977.10 97% 256.89 147.50 57%
1 4096 8665.35 8394.78 96% 289.63 289.85 100%
2 4096 7850.73 8857.86 112% 253.33 252.62 99%
4 4096 9332.55 8508.37 91% 289.19 151.29 52%
8 4096 8482.30 9146.80 107% 255.41 156.02 61%
1 16384 8825.72 8778.26 99% 314.60 308.89 98%
2 16384 9283.85 8927.40 96% 316.48 246.98 78%
4 16384 7766.95 8708.06 112% 265.25 155.59 58%
8 16384 8945.55 8940.23 99% 298.45 151.32 50%
- TCP_RR
sessions size throughput1 throughput2 norm1 norm2
50 1 60848.70 81719.39 134% 2196.86 1551.05 70%
100 1 61886.19 81425.02 131% 2215.76 1517.52 68%
250 1 72058.41 162597.84 225% 2441.84 2278.14 93%
50 64 51646.93 74160.10 143% 1861.07 1322.22 71%
100 64 57574.86 83488.26 145% 2076.54 1479.79 71%
250 64 67583.35 138482.15 204% 2314.46 2022.83 87%
50 128 59931.51 71633.03 119% 2244.60 1309.18 58%
100 128 58329.80 73104.90 125% 2202.98 1329.52 60%
250 128 71021.55 161067.73 226% 2469.11 2205.28 89%
50 256 47509.24 64330.24 135% 1915.75 1269.90 66%
100 256 49293.03 68507.94 138% 1939.75 1263.64 65%
250 256 63169.07 138390.68 219% 2255.47 2098.13 93%
- External Host to Guest TCP STREAM
sessions size throughput1 throughput2 norm1 norm2
1 64 850.18 854.96 100% 56.94 58.25 102%
2 64 1659.12 1730.25 104% 81.65 67.57 82%
4 64 3254.70 3397.17 104% 118.57 76.21 64%
8 64 6251.97 6389.29 102% 207.68 104.21 50%
1 256 2029.14 2105.18 103% 116.45 119.69 102%
2 256 5412.02 4260.32 78% 240.87 139.73 58%
4 256 7777.28 8743.12 112% 263.20 174.65 66%
8 256 6459.51 9388.93 145% 218.94 158.37 72%
1 512 4566.31 4269.30 93% 274.74 289.83 105%
2 512 7444.52 8240.64 110% 286.24 243.74 85%
4 512 7722.29 9391.16 121% 261.96 180.36 68%
8 512 6228.50 9134.52 146% 209.17 161.00 76%
1 1024 4965.50 4953.68 99% 307.64 280.48 91%
2 1024 8270.08 7733.71 93% 288.32 197.04 68%
4 1024 7551.04 9394.58 124% 268.41 206.62 76%
8 1024 6307.78 9179.03 145% 216.67 159.63 73%
1 2048 5741.12 5948.80 103% 290.34 268.66 92%
2 2048 7932.79 8766.05 110% 262.96 215.90 82%
4 2048 6907.55 9255.97 133% 233.56 203.96 87%
8 2048 6037.22 9399.41 155% 197.14 164.09 83%
1 4096 7131.70 7535.10 105% 279.43 275.12 98%
2 4096 8109.17 9348.04 115% 274.29 211.49 77%
4 4096 6878.92 9319.13 135% 244.21 192.06 78%
8 4096 6265.92 9408.35 150% 211.85 159.26 75%
1 16384 8288.01 8596.39 103% 272.85 290.22 106%
2 16384 8166.29 9280.12 113% 277.04 236.61 85%
4 16384 6446.97 9382.22 145% 222.91 187.24 83%
8 16384 6066.98 9405.51 155% 198.98 157.09 78%
3) 2 vms each with 2 vcpus, 1q vs 2q - pin vhost/vcpu in the same node
- 2 Guests to External Hosts TCP STREAM
sessions size throughput1 throughput2 norm1 norm2
1 64 1442.07 1475.11 102% 30.82 31.21 101%
2 64 3124.87 2900.93 92% 40.29 35.95 89%
4 64 3166.52 2864.04 90% 40.70 35.47 87%
8 64 3141.45 2848.94 90% 40.38 35.34 87%
1 256 3628.54 3711.73 102% 68.47 70.22 102%
2 256 7806.95 7586.69 97% 111.23 84.38 75%
4 256 8823.65 7612.74 86% 132.92 85.04 63%
8 256 9194.89 9373.41 101% 135.98 119.62 87%
1 512 7106.67 7128.00 100% 124.79 124.30 99%
2 512 9190.22 9397.33 102% 180.84 149.34 82%
4 512 9401.01 9376.67 99% 173.00 140.15 81%
8 512 8572.84 9032.90 105% 150.49 127.58 84%
1 1024 9361.93 9379.24 100% 205.81 202.94 98%
2 1024 9386.69 9389.04 100% 201.78 165.75 82%
4 1024 9403.43 9378.54 99% 195.33 152.06 77%
8 1024 9213.63 9180.64 99% 178.99 141.51 79%
1 2048 9338.95 9384.67 100% 223.22 227.86 102%
2 2048 9389.28 9389.45 100% 202.37 170.08 84%
4 2048 9405.86 9388.71 99% 193.76 161.54 83%
8 2048 9352.40 9384.06 100% 189.16 157.06 83%
1 4096 9380.74 9384.90 100% 239.37 241.56 100%
2 4096 9393.47 9376.74 99% 213.84 195.61 91%
4 4096 9393.85 9381.50 99% 198.06 170.18 85%
8 4096 9400.41 9232.31 98% 192.87 163.56 84%
1 16384 9348.18 9335.55 99% 253.02 254.86 100%
2 16384 9384.97 9359.53 99% 218.56 208.59 95%
4 16384 9326.60 9382.15 100% 206.24 179.72 87%
8 16384 9355.82 9392.85 100% 198.22 172.89 87%
- TCP RR
sessions size throughput1 throughput2 norm1 norm2
50 1 200340.33 261750.19 130% 2935.27 3018.59 102%
100 1 236141.58 266304.49 112% 3452.16 3071.74 88%
250 1 361574.59 320825.08 88% 4972.98 3705.70 74%
50 64 225748.53 242671.12 107% 3011.48 2869.07 95%
100 64 249885.37 260453.72 104% 3240.21 3063.67 94%
250 64 360341.12 310775.60 86% 4682.42 3657.91 78%
50 128 227995.27 289320.38 126% 2950.92 3479.37 117%
100 128 239491.11 291135.77 121% 3099.55 3508.75 113%
250 128 390390.68 362484.35 92% 5042.30 4368.52 86%
50 256 222604.51 317140.97 142% 3058.08 3839.39 125%
100 256 254770.92 335606.03 131% 3326.16 4046.65 121%
250 256 400584.52 436749.22 109% 5220.79 5278.86 101%
- External Host to 2 Guests
sessions size throughput1 throughput2 norm1 norm2
1 64 1667.99 1684.50 100% 59.66 60.77 101%
2 64 3338.83 3379.97 101% 83.61 64.82 77%
4 64 6613.65 6619.11 100% 131.00 97.19 74%
8 64 6553.07 6418.31 97% 141.35 98.27 69%
1 256 3938.40 4068.52 103% 125.21 123.76 98%
2 256 9215.57 9210.88 99% 185.31 154.27 83%
4 256 9407.29 9008.13 95% 186.72 150.01 80%
8 256 9377.17 9385.57 100% 190.28 137.59 72%
1 512 7360.19 6984.80 94% 214.09 211.66 98%
2 512 9392.91 9401.88 100% 193.92 173.11 89%
4 512 9382.64 9394.34 100% 189.27 145.80 77%
8 512 9308.60 9094.08 97% 189.70 141.26 74%
1 1024 9153.26 9066.06 99% 223.07 219.95 98%
2 1024 9393.38 9398.43 100% 194.02 173.82 89%
4 1024 9395.92 8960.73 95% 192.61 145.82 75%
8 1024 9388.92 9399.08 100% 191.18 143.87 75%
1 2048 9355.32 9240.63 98% 221.50 223.03 100%
2 2048 9395.68 9399.62 100% 193.31 177.21 91%
4 2048 9397.67 9399.56 100% 195.25 157.53 80%
8 2048 9397.89 9401.70 100% 197.57 146.96 74%
1 4096 9375.84 9381.72 100% 223.06 225.06 100%
2 4096 9389.47 9396.00 100% 193.91 197.13 101%
4 4096 9397.45 9400.11 100% 192.33 163.60 85%
8 4096 9105.40 9415.76 103% 192.71 140.41 72%
1 16384 9381.53 9381.40 99% 223.53 225.66 100%
2 16384 9387.90 9395.44 100% 193.34 177.03 91%
4 16384 9397.92 9410.98 100% 195.04 151.14 77%
8 16384 9259.00 9419.48 101% 194.91 153.48 78%
4) Local vm to vm 2 vcpu 1q vs 2q - pin vcpu/thread in the same numa node
- VM to VM TCP STREAM
sessions size throughput1 throughput2 norm1 norm2
1 64 576.05 576.14 100% 12.25 12.32 100%
2 64 1266.75 1160.04 91% 19.10 16.05 84%
4 64 1267.34 1123.70 88% 19.08 15.51 81%
8 64 1230.88 1174.70 95% 18.53 15.58 84%
1 256 1311.00 1303.02 99% 25.34 25.35 100%
2 256 5400.26 2794.00 51% 75.92 36.43 47%
4 256 5200.67 2818.88 54% 72.81 33.92 46%
8 256 5234.55 2893.74 55% 73.10 34.97 47%
1 512 3244.09 3263.72 100% 56.48 56.65 100%
2 512 8172.16 4661.15 57% 119.05 67.89 57%
4 512 10567.44 7063.25 66% 147.76 77.27 52%
8 512 10477.87 8471.33 80% 145.94 102.91 70%
1 1024 5432.54 5333.99 98% 93.69 92.38 98%
2 1024 12590.24 9259.97 73% 185.37 135.28 72%
4 1024 15600.53 10731.93 68% 222.20 123.60 55%
8 1024 16222.87 10704.85 65% 227.05 113.81 50%
1 2048 6667.61 7484.37 112% 116.75 129.72 111%
2 2048 8180.43 11500.88 140% 137.84 156.64 113%
4 2048 15127.93 14416.16 95% 227.60 154.59 67%
8 2048 16381.79 14794.10 90% 244.29 158.45 64%
1 4096 7375.63 8948.90 121% 131.97 156.57 118%
2 4096 9321.16 14443.21 154% 161.24 163.74 101%
4 4096 13028.45 15984.94 122% 212.78 171.26 80%
8 4096 15611.28 18810.54 120% 245.15 198.65 81%
1 16384 15304.38 14202.08 92% 259.94 244.04 93%
2 16384 15508.97 15913.09 102% 261.30 244.26 93%
4 16384 14859.98 20164.34 135% 248.29 214.26 86%
8 16384 15594.59 19960.99 127% 253.79 211.27 83%
- TCP RR
sessions size throughput1 throughput2 norm1 norm2
50 1 54972.51 69820.99 127% 1133.58 1063.58 93%
100 1 55847.16 72407.93 129% 1155.73 1024.35 88%
250 1 60066.23 108266.50 180% 1114.30 1323.55 118%
50 64 48727.63 62378.32 128% 1014.29 888.78 87%
100 64 51804.65 69250.51 133% 1077.78 986.97 91%
250 64 61278.68 100015.78 163% 1076.93 1243.18 115%
50 256 51593.29 62046.22 120% 1069.14 871.08 81%
100 256 51647.00 68197.43 132% 1071.66 958.51 89%
250 256 60433.88 99072.59 163% 1072.41 1199.10 111%
50 512 52177.79 66483.77 127% 1082.65 960.82 88%
100 512 50351.67 62537.63 124% 1041.61 876.41 84%
250 512 60510.14 103856.79 171% 1055.21 1245.17 118%
Jason Wang (4):
virtio_ring: move queue_index to vring_virtqueue
virtio: intorduce an API to set affinity for a virtqueue
virtio_net: multiqueue support
virtio_net: support negotiating the number of queues through ctrl vq
Krishna Kumar (1):
virtio_net: Introduce VIRTIO_NET_F_MULTIQUEUE
drivers/net/virtio_net.c | 792 +++++++++++++++++++++++++++++------------
drivers/virtio/virtio_mmio.c | 5 +-
drivers/virtio/virtio_pci.c | 58 +++-
drivers/virtio/virtio_ring.c | 17 +
include/linux/virtio.h | 4 +
include/linux/virtio_config.h | 21 ++
include/linux/virtio_net.h | 10 +
7 files changed, 677 insertions(+), 230 deletions(-)
^ permalink raw reply
* Re: [PATCH net] net: qmi_wwan: add ZTE MF60
From: David Miller @ 2012-07-05 10:16 UTC (permalink / raw)
To: bjorn; +Cc: netdev
In-Reply-To: <1341251597-21124-1-git-send-email-bjorn@mork.no>
From: Bjørn Mork <bjorn@mork.no>
Date: Mon, 2 Jul 2012 19:53:17 +0200
> +static const struct driver_info qmi_wwan_force_int2 = {
Please get rid of that strange tab character and resubmit.
^ permalink raw reply
* Re: [PATCH 0/5] rtcache remove respin
From: David Miller @ 2012-07-05 10:15 UTC (permalink / raw)
To: eric.dumazet; +Cc: netdev
In-Reply-To: <1341225841.5269.69.camel@edumazet-glaptop>
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Mon, 02 Jul 2012 12:44:01 +0200
> If we still want __refcnt being on cache line boundary, we might find a
> better way to accomplish this.
Back to this issue again.
Eric, if you take a look at net-next right now, I left a dummy padding
in dst_entry where the neighbour pointer used to be.
Can you come up with some way to make use of that new space?
^ permalink raw reply
* Re: [PATCH net-next 2/2] drivers/ieee802154/at231rf230: remove unused return status
From: David Miller @ 2012-07-05 10:13 UTC (permalink / raw)
To: alex.bluesman.smirnov; +Cc: netdev, dbaryshkov
In-Reply-To: <1341209912-6030-3-git-send-email-alex.bluesman.smirnov@gmail.com>
From: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Date: Mon, 2 Jul 2012 10:18:32 +0400
> Remove excessive variable used for the return status.
>
> Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Applied.
^ permalink raw reply
* Re: [PATCH net-next] 6lowpan: revert 'reuse eth_mac_addr()'
From: David Miller @ 2012-07-05 10:13 UTC (permalink / raw)
To: alex.bluesman.smirnov; +Cc: netdev, danny.kukawka, dbaryshkov
In-Reply-To: <1341208726-2793-1-git-send-email-alex.bluesman.smirnov@gmail.com>
From: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Date: Mon, 2 Jul 2012 09:58:46 +0400
> This reverts the commit cdf49c283e2e105da86ca575ad35b453f5ff24ea which
> replaces lowpan '.ndo_set_mac_address' method by ethernet's one.
>
> Accorind to the IEEE 802.15.4 standard, device has 8-byte length address,
> so this hook loses the last 2 bytes which may rise a compatibility problems
> with other IEEE 802.15.4 standard implementations.
>
> Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Applied.
^ permalink raw reply
* Re: [PATCH net-next 2/2] dccp: remove unnecessary codes in ipv6.c
From: David Miller @ 2012-07-05 10:13 UTC (permalink / raw)
To: eric.dumazet; +Cc: roy.qing.li, netdev
In-Reply-To: <1341220130.5269.38.camel@edumazet-glaptop>
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Mon, 02 Jul 2012 11:08:50 +0200
> On Mon, 2012-07-02 at 11:19 +0800, roy.qing.li@gmail.com wrote:
>> From: RongQing.Li <roy.qing.li@gmail.com>
>>
>> opt always equals np->opts, so it is meaningless to define opt, and
>> check if opt does not equal np->opts and then try to free opt.
>>
>> Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
>> ---
>
> Acked-by: Eric Dumazet <edumazet@google.com>
Also applied, thank you.
^ permalink raw reply
* Re: [PATCH net-next 1/2] ipv6: remove unnecessary codes in tcp_ipv6.c
From: David Miller @ 2012-07-05 10:13 UTC (permalink / raw)
To: eric.dumazet; +Cc: roy.qing.li, netdev
In-Reply-To: <1341220067.5269.37.camel@edumazet-glaptop>
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Mon, 02 Jul 2012 11:07:47 +0200
> On Mon, 2012-07-02 at 11:18 +0800, roy.qing.li@gmail.com wrote:
>> From: RongQing.Li <roy.qing.li@gmail.com>
>>
>> opt always equals np->opts, so it is meaningless to define opt, and
>> check if opt does not equal np->opts and then try to free opt.
>>
>> Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
>> ---
>> net/ipv6/tcp_ipv6.c | 16 +++-------------
>> 1 files changed, 3 insertions(+), 13 deletions(-)
>
> Acked-by: Eric Dumazet <edumazet@google.com>
Ok I now understand better why these changes are correct,
applied.
^ permalink raw reply
* Re: [PATCH net-next 00/11] default maximal number of RSS queues in mq drivers
From: David Miller @ 2012-07-05 10:07 UTC (permalink / raw)
To: yuvalmin
Cc: netdev, eilong, divy, ogerlitz, jdmason, anirban.chakraborty,
jitendra.kalsaria, ron.mercer, jeffrey.t.kirsher, mason, gallatin,
sathya.perla, subbu.seetharaman, ajit.khaparde, mcarlson, mchan,
eric.dumazet, bhutchings
In-Reply-To: <1341148740-7375-1-git-send-email-yuvalmin@broadcom.com>
From: "Yuval Mintz" <yuvalmin@broadcom.com>
Date: Sun, 1 Jul 2012 16:18:49 +0300
> Different vendors support different number of RSS queues by default. Today,
> there exists an ethtool API through which users can change the number of
> channels their driver supports; This enables us to pursue the goal of using
> a default number of RSS queues in various multi-queue drivers.
>
> This patch intendeds to achieve the above default, by upper-limiting the number
> of interrupts multi-queue drivers request (by default, not via the new API)
> with correlation to the number of cpus on the machine.
Applied to net-next, thanks a lot.
^ permalink raw reply
* Re: [PATCH net-next v2] ipv4: defer fib_compute_spec_dst() call
From: David Miller @ 2012-07-05 10:03 UTC (permalink / raw)
To: eric.dumazet; +Cc: netdev
In-Reply-To: <1341477009.2583.3406.camel@edumazet-glaptop>
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Thu, 05 Jul 2012 10:30:09 +0200
> From: Eric Dumazet <edumazet@google.com>
>
> ip_options_compile() can avoid calling fib_compute_spec_dst()
> by default, and perform the call only if needed.
>
> David suggested to add a helper to make the call only once.
>
> Signed-off-by: Eric Dumazet <edumazet@google.com>
Applied, thanks a lot Eric.
^ permalink raw reply
* Re: TCP transmit performance regression
From: David Miller @ 2012-07-05 10:02 UTC (permalink / raw)
To: eric.dumazet; +Cc: tom.leiming, netdev
In-Reply-To: <1341481760.2583.3579.camel@edumazet-glaptop>
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Thu, 05 Jul 2012 11:49:20 +0200
> - ax_skb->data = packet;
That's really scary.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox