* Re: [PATCHv2] MAINTAINERS: Replace Vince Bridgers as Altera TSE maintainer
From: David Miller @ 2018-11-15 17:41 UTC (permalink / raw)
To: thor.thayer; +Cc: netdev, gregkh, vince.bridgers, atull, jhogan
In-Reply-To: <1542045056-8186-1-git-send-email-thor.thayer@linux.intel.com>
From: thor.thayer@linux.intel.com
Date: Mon, 12 Nov 2018 11:50:56 -0600
> From: Thor Thayer <thor.thayer@linux.intel.com>
>
> Vince has moved to a different role. Replace him as Altera
> TSE maintainer.
>
> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
> Acked-by: Vince Bridgers <vince.bridgers@intel.com>
> Acked-by: Alan Tull <atull@kernel.org>
> ---
> v2 Include netdev and David Miller
Applied.
^ permalink raw reply
* Re: [PATCH net V2] cxgb4: fix thermal zone build error
From: David Miller @ 2018-11-15 17:49 UTC (permalink / raw)
To: ganeshgr; +Cc: netdev, nirranjan, indranil, dt, rdunlap, sergei.shtylyov
In-Reply-To: <1542276381-10543-1-git-send-email-ganeshgr@chelsio.com>
From: Ganesh Goudar <ganeshgr@chelsio.com>
Date: Thu, 15 Nov 2018 15:36:21 +0530
> with CONFIG_THERMAL=m and cxgb4 as built-in build fails, and
> 'commit e70a57fa59bb ("cxgb4: fix thermal configuration dependencies")'
> tries to fix it but when cxgb4i is made built-in build fails again,
> use IS_REACHABLE instead of IS_ENABLED to fix the issue.
>
> Fixes: e70a57fa59bb (cxgb4: fix thermal configuration dependencies)
> Reported-by: Randy Dunlap <rdunlap@infradead.org>
> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
> ---
> V2: Fixing spelling mistake and avoid preprocessor conditionals.
Applied.
^ permalink raw reply
* Re: [PATCH net V2 0/5] net/smc: fixes 2018-11-12
From: David Miller @ 2018-11-15 17:54 UTC (permalink / raw)
To: ubraun; +Cc: netdev, linux-s390, schwidefsky, heiko.carstens, raspl
In-Reply-To: <20181115121120.98440-1-ubraun@linux.ibm.com>
From: Ursula Braun <ubraun@linux.ibm.com>
Date: Thu, 15 Nov 2018 13:11:15 +0100
> v1->v2:
> do not define 8-byte alignment for union smcd_cdc_cursor in
> patch 4/5 "net/smc: atomic SMCD cursor handling"
This is even worse.
The atomic64_t must be properly 8 byte aligned, else it will
crash the kernel when an atomic operation is attempted on it.
You have a situation where your struct attributes are entirely
incompatible. If the parent struct is __packed, you absolutely
cannot align the atomic64_t in the child structure properly.
One more time, __packed makes correctness here impossible.
I've warned strongly in the past to avoid __packed.
Now you have to untangle this mess somehow.
^ permalink raw reply
* Re: [PATCH net V2] cxgb4: fix thermal zone build error
From: Randy Dunlap @ 2018-11-15 18:05 UTC (permalink / raw)
To: Ganesh Goudar, netdev, davem; +Cc: nirranjan, indranil, dt, sergei.shtylyov
In-Reply-To: <1542276381-10543-1-git-send-email-ganeshgr@chelsio.com>
On 11/15/18 2:06 AM, Ganesh Goudar wrote:
> with CONFIG_THERMAL=m and cxgb4 as built-in build fails, and
> 'commit e70a57fa59bb ("cxgb4: fix thermal configuration dependencies")'
> tries to fix it but when cxgb4i is made built-in build fails again,
> use IS_REACHABLE instead of IS_ENABLED to fix the issue.
>
> Fixes: e70a57fa59bb (cxgb4: fix thermal configuration dependencies)
> Reported-by: Randy Dunlap <rdunlap@infradead.org>
> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Thanks.
> ---
> V2: Fixing spelling mistake and avoid preprocessor conditionals.
> ---
> drivers/net/ethernet/chelsio/Kconfig | 1 -
> drivers/net/ethernet/chelsio/cxgb4/Makefile | 4 +---
> drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 4 ++--
> 3 files changed, 3 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig
> index 75c1c5e..e2cdfa7 100644
> --- a/drivers/net/ethernet/chelsio/Kconfig
> +++ b/drivers/net/ethernet/chelsio/Kconfig
> @@ -67,7 +67,6 @@ config CHELSIO_T3
> config CHELSIO_T4
> tristate "Chelsio Communications T4/T5/T6 Ethernet support"
> depends on PCI && (IPV6 || IPV6=n)
> - depends on THERMAL || !THERMAL
> select FW_LOADER
> select MDIO
> select ZLIB_DEFLATE
> diff --git a/drivers/net/ethernet/chelsio/cxgb4/Makefile b/drivers/net/ethernet/chelsio/cxgb4/Makefile
> index 78e5d17..91d8a88 100644
> --- a/drivers/net/ethernet/chelsio/cxgb4/Makefile
> +++ b/drivers/net/ethernet/chelsio/cxgb4/Makefile
> @@ -12,6 +12,4 @@ cxgb4-objs := cxgb4_main.o l2t.o smt.o t4_hw.o sge.o clip_tbl.o cxgb4_ethtool.o
> cxgb4-$(CONFIG_CHELSIO_T4_DCB) += cxgb4_dcb.o
> cxgb4-$(CONFIG_CHELSIO_T4_FCOE) += cxgb4_fcoe.o
> cxgb4-$(CONFIG_DEBUG_FS) += cxgb4_debugfs.o
> -ifdef CONFIG_THERMAL
> -cxgb4-objs += cxgb4_thermal.o
> -endif
> +cxgb4-$(CONFIG_THERMAL) += cxgb4_thermal.o
> diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
> index 05a4692..d49db46 100644
> --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
> +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
> @@ -5863,7 +5863,7 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> if (!is_t4(adapter->params.chip))
> cxgb4_ptp_init(adapter);
>
> - if (IS_ENABLED(CONFIG_THERMAL) &&
> + if (IS_REACHABLE(CONFIG_THERMAL) &&
> !is_t4(adapter->params.chip) && (adapter->flags & FW_OK))
> cxgb4_thermal_init(adapter);
>
> @@ -5932,7 +5932,7 @@ static void remove_one(struct pci_dev *pdev)
>
> if (!is_t4(adapter->params.chip))
> cxgb4_ptp_stop(adapter);
> - if (IS_ENABLED(CONFIG_THERMAL))
> + if (IS_REACHABLE(CONFIG_THERMAL))
> cxgb4_thermal_remove(adapter);
>
> /* If we allocated filters, free up state associated with any
>
--
~Randy
^ permalink raw reply
* Re: [PATCH net] ipv6: fix a dst leak when removing its exception
From: David Ahern @ 2018-11-15 18:17 UTC (permalink / raw)
To: Xin Long; +Cc: network dev, davem
In-Reply-To: <CADvbK_dBExLLRRtft4tF5_gUeshOKoOT5mxnC6+zjpjOoHC8uw@mail.gmail.com>
On 11/14/18 11:23 PM, Xin Long wrote:
> On Thu, Nov 15, 2018 at 3:33 PM David Ahern <dsa@cumulusnetworks.com> wrote:
>>
>> On 11/14/18 11:03 AM, David Ahern wrote:
>>> On 11/13/18 8:48 AM, Xin Long wrote:
>>>> These is no need to hold dst before calling rt6_remove_exception_rt().
>>>> The call to dst_hold_safe() in ip6_link_failure() was for ip6_del_rt(),
>>>> which has been removed in Commit 93531c674315 ("net/ipv6: separate
>>>> handling of FIB entries from dst based routes"). Otherwise, it will
>>>> cause a dst leak.
>>>>
>>>> This patch is to simply remove the dst_hold_safe() call before calling
>>>> rt6_remove_exception_rt() and also do the same in ip6_del_cached_rt().
>>>> It's safe, because the removal of the exception that holds its dst's
>>>> refcnt is protected by rt6_exception_lock.
>>>>
>>>> Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes")
>>>> Fixes: 23fb93a4d3f1 ("net/ipv6: Cleanup exception and cache route handling")
>>>> Reported-by: Li Shuang <shuali@redhat.com>
>>>> Signed-off-by: Xin Long <lucien.xin@gmail.com>
>>>> ---
>>>> net/ipv6/route.c | 7 +++----
>>>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>>
>>> was this problem actually hit or is this patch based on a code analysis?
>>>
>>
>> I ask because I have not been able to reproduce the leak using existing
>> tests (e.g., pmtu) that I know create exceptions.
>>
>> If this problem was hit, it would be good to get a test case for it.
> The attachment is the ip6_dst.sh with IPVS.
>
> # sh ip6_dst.sh
>
> But this one triggers the kernel warnings caused by 2 places:
> unregister_netdevice: waiting for br0 to become free. Usage count = 3
>
> 1. one is IPVS, I just posted the fix:
> https://patchwork.ozlabs.org/patch/998123/ [1]
> 2. the other one is IPv6,
> ip6_link_failure() will be hit.
>
> So to make this reproduce clearly, you may want to apply
> patch [1] firstly.
>
Thanks for the script. It does not replicate the problem using net-next
tree as of
commit 6d5db6c37929cb0a84e64ba0590a74593e5ce3b8
Merge: 15cef30974c5 bd3b5d462add
Author: David S. Miller <davem@davemloft.net>
Date: Wed Nov 14 08:51:28 2018 -0800
Merge branch 'nfp-abm-track-all-Qdiscs'
I would be really surprised if the fib6_info change introduced a need to
change the dst hold's for exception routes. I am not seeing the
connection, so I really want to see it reproduced.
Thanks
^ permalink raw reply
* [PATCH net-next v4 0/6] net/ncsi: Allow enabling multiple packages & channels
From: Samuel Mendoza-Jonas @ 2018-11-16 4:51 UTC (permalink / raw)
To: netdev
Cc: Samuel Mendoza-Jonas, David S . Miller, Justin.Lee1, linux-kernel,
openbmc
This series extends the NCSI driver to configure multiple packages
and/or channels simultaneously. Since the RFC series this includes a few
extra changes to fix areas in the driver that either made this harder or
were roadblocks due to deviations from the NCSI specification.
Patches 1 & 2 fix two issues where the driver made assumptions about the
capabilities of the NCSI topology.
Patches 3 & 4 change some internal semantics slightly to make multi-mode
easier.
Patch 5 introduces a cleaner way of reconfiguring the NCSI configuration
and keeping track of channel states.
Patch 6 implements the main multi-package/multi-channel configuration,
configured via the Netlink interface.
Readers who have an interesting NCSI setup - especially multi-package
with HWA - please test! I think I've covered all permutations but I
don't have infinite hardware to test on.
Changes in v2:
- Updated use of the channel lock in ncsi_reset_dev(), making the
channel invisible and leaving the monitor check to
ncsi_stop_channel_monitor().
- Fixed ncsi_channel_is_tx() to consider the state of channels in other
packages.
Changes in v3:
- Fixed bisectability bug in patch 1
- Consider channels on all packages in a few places when multi-package
is enabled.
- Avoid doubling up reset operations, and check the current driver state
before reset to let any running operations complete.
- Reorganise the LSC handler slightly to avoid enabling Tx twice.
Changes in v4:
- Fix failover in the single-channel case
- Better handle ncsi_reset_dev() entry during a current config/suspend
operation.
Samuel Mendoza-Jonas (6):
net/ncsi: Don't enable all channels when HWA available
net/ncsi: Probe single packages to avoid conflict
net/ncsi: Don't deselect package in suspend if active
net/ncsi: Don't mark configured channels inactive
net/ncsi: Reset channel state in ncsi_start_dev()
net/ncsi: Configure multi-package, multi-channel modes with failover
include/uapi/linux/ncsi.h | 15 ++
net/ncsi/internal.h | 19 +-
net/ncsi/ncsi-aen.c | 75 ++++--
net/ncsi/ncsi-manage.c | 522 +++++++++++++++++++++++++++-----------
net/ncsi/ncsi-netlink.c | 233 ++++++++++++++---
net/ncsi/ncsi-rsp.c | 2 +-
6 files changed, 660 insertions(+), 206 deletions(-)
--
2.19.1
^ permalink raw reply
* [PATCH net-next v4 1/6] net/ncsi: Don't enable all channels when HWA available
From: Samuel Mendoza-Jonas @ 2018-11-16 4:51 UTC (permalink / raw)
To: netdev
Cc: Samuel Mendoza-Jonas, David S . Miller, Justin.Lee1, linux-kernel,
openbmc
In-Reply-To: <20181116045159.4980-1-sam@mendozajonas.com>
NCSI hardware arbitration allows multiple packages to be enabled at once
and share the same wiring. If the NCSI driver recognises that HWA is
available it unconditionally enables all packages and channels; but that
is a configuration decision rather than something required by HWA.
Additionally the current implementation will not failover on link events
which can cause connectivity to be lost unless the interface is manually
bounced.
Retain basic HWA support but remove the separate configuration path to
enable all channels, leaving this to be handled by a later
implementation.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
---
net/ncsi/ncsi-aen.c | 3 +--
net/ncsi/ncsi-manage.c | 50 ++++--------------------------------------
2 files changed, 5 insertions(+), 48 deletions(-)
diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c
index 25e483e8278b..65f47a648be3 100644
--- a/net/ncsi/ncsi-aen.c
+++ b/net/ncsi/ncsi-aen.c
@@ -86,8 +86,7 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp,
!(state == NCSI_CHANNEL_ACTIVE && !(data & 0x1)))
return 0;
- if (!(ndp->flags & NCSI_DEV_HWA) &&
- state == NCSI_CHANNEL_ACTIVE)
+ if (state == NCSI_CHANNEL_ACTIVE)
ndp->flags |= NCSI_DEV_RESHUFFLE;
ncsi_stop_channel_monitor(nc);
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index bfc43b28c7a6..d4e6e0f99097 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -113,10 +113,8 @@ static void ncsi_channel_monitor(struct timer_list *t)
default:
netdev_err(ndp->ndev.dev, "NCSI Channel %d timed out!\n",
nc->id);
- if (!(ndp->flags & NCSI_DEV_HWA)) {
- ncsi_report_link(ndp, true);
- ndp->flags |= NCSI_DEV_RESHUFFLE;
- }
+ ncsi_report_link(ndp, true);
+ ndp->flags |= NCSI_DEV_RESHUFFLE;
ncsi_stop_channel_monitor(nc);
@@ -1050,35 +1048,6 @@ static bool ncsi_check_hwa(struct ncsi_dev_priv *ndp)
return false;
}
-static int ncsi_enable_hwa(struct ncsi_dev_priv *ndp)
-{
- struct ncsi_package *np;
- struct ncsi_channel *nc;
- unsigned long flags;
-
- /* Move all available channels to processing queue */
- spin_lock_irqsave(&ndp->lock, flags);
- NCSI_FOR_EACH_PACKAGE(ndp, np) {
- NCSI_FOR_EACH_CHANNEL(np, nc) {
- WARN_ON_ONCE(nc->state != NCSI_CHANNEL_INACTIVE ||
- !list_empty(&nc->link));
- ncsi_stop_channel_monitor(nc);
- list_add_tail_rcu(&nc->link, &ndp->channel_queue);
- }
- }
- spin_unlock_irqrestore(&ndp->lock, flags);
-
- /* We can have no channels in extremely case */
- if (list_empty(&ndp->channel_queue)) {
- netdev_err(ndp->ndev.dev,
- "NCSI: No available channels for HWA\n");
- ncsi_report_link(ndp, false);
- return -ENOENT;
- }
-
- return ncsi_process_next_channel(ndp);
-}
-
static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)
{
struct ncsi_dev *nd = &ndp->ndev;
@@ -1156,10 +1125,7 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)
*/
if (!ndp->active_package) {
ndp->flags |= NCSI_DEV_PROBED;
- if (ncsi_check_hwa(ndp))
- ncsi_enable_hwa(ndp);
- else
- ncsi_choose_active_channel(ndp);
+ ncsi_choose_active_channel(ndp);
return;
}
@@ -1592,7 +1558,6 @@ EXPORT_SYMBOL_GPL(ncsi_register_dev);
int ncsi_start_dev(struct ncsi_dev *nd)
{
struct ncsi_dev_priv *ndp = TO_NCSI_DEV_PRIV(nd);
- int ret;
if (nd->state != ncsi_dev_state_registered &&
nd->state != ncsi_dev_state_functional)
@@ -1604,14 +1569,7 @@ int ncsi_start_dev(struct ncsi_dev *nd)
return 0;
}
- if (ndp->flags & NCSI_DEV_HWA) {
- netdev_info(ndp->ndev.dev, "NCSI: Enabling HWA mode\n");
- ret = ncsi_enable_hwa(ndp);
- } else {
- ret = ncsi_choose_active_channel(ndp);
- }
-
- return ret;
+ return ncsi_choose_active_channel(ndp);
}
EXPORT_SYMBOL_GPL(ncsi_start_dev);
--
2.19.1
^ permalink raw reply related
* [PATCH net-next v4 2/6] net/ncsi: Probe single packages to avoid conflict
From: Samuel Mendoza-Jonas @ 2018-11-16 4:51 UTC (permalink / raw)
To: netdev
Cc: Samuel Mendoza-Jonas, David S . Miller, Justin.Lee1, linux-kernel,
openbmc
In-Reply-To: <20181116045159.4980-1-sam@mendozajonas.com>
Currently the NCSI driver sends a select-package command to all possible
packages simultaneously to discover what packages are available. However
at this stage in the probe process the driver does not know if
hardware arbitration is available: if it isn't then this process could
cause collisions on the RMII bus when packages try to respond.
Update the probe loop to probe each package one by one, and once
complete check if HWA is universally supported.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
---
net/ncsi/internal.h | 1 +
net/ncsi/ncsi-manage.c | 85 +++++++++++++++---------------------------
2 files changed, 31 insertions(+), 55 deletions(-)
diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
index 1dae77c54009..ec65778c41f3 100644
--- a/net/ncsi/internal.h
+++ b/net/ncsi/internal.h
@@ -292,6 +292,7 @@ struct ncsi_dev_priv {
#if IS_ENABLED(CONFIG_IPV6)
unsigned int inet6_addr_num; /* Number of IPv6 addresses */
#endif
+ unsigned int package_probe_id;/* Current ID during probe */
unsigned int package_num; /* Number of packages */
struct list_head packages; /* List of packages */
struct ncsi_channel *hot_channel; /* Channel was ever active */
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index d4e6e0f99097..02421d1a22c9 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -1079,67 +1079,28 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)
nd->state = ncsi_dev_state_probe_package;
break;
case ncsi_dev_state_probe_package:
- ndp->pending_req_num = 16;
+ ndp->pending_req_num = 1;
- /* Select all possible packages */
nca.type = NCSI_PKT_CMD_SP;
nca.bytes[0] = 1;
+ nca.package = ndp->package_probe_id;
nca.channel = NCSI_RESERVED_CHANNEL;
- for (index = 0; index < 8; index++) {
- nca.package = index;
- ret = ncsi_xmit_cmd(&nca);
- if (ret)
- goto error;
- }
-
- /* Disable all possible packages */
- nca.type = NCSI_PKT_CMD_DP;
- for (index = 0; index < 8; index++) {
- nca.package = index;
- ret = ncsi_xmit_cmd(&nca);
- if (ret)
- goto error;
- }
-
+ ret = ncsi_xmit_cmd(&nca);
+ if (ret)
+ goto error;
nd->state = ncsi_dev_state_probe_channel;
break;
case ncsi_dev_state_probe_channel:
- if (!ndp->active_package)
- ndp->active_package = list_first_or_null_rcu(
- &ndp->packages, struct ncsi_package, node);
- else if (list_is_last(&ndp->active_package->node,
- &ndp->packages))
- ndp->active_package = NULL;
- else
- ndp->active_package = list_next_entry(
- ndp->active_package, node);
-
- /* All available packages and channels are enumerated. The
- * enumeration happens for once when the NCSI interface is
- * started. So we need continue to start the interface after
- * the enumeration.
- *
- * We have to choose an active channel before configuring it.
- * Note that we possibly don't have active channel in extreme
- * situation.
- */
+ ndp->active_package = ncsi_find_package(ndp,
+ ndp->package_probe_id);
if (!ndp->active_package) {
- ndp->flags |= NCSI_DEV_PROBED;
- ncsi_choose_active_channel(ndp);
- return;
+ /* No response */
+ nd->state = ncsi_dev_state_probe_dp;
+ schedule_work(&ndp->work);
+ break;
}
-
- /* Select the active package */
- ndp->pending_req_num = 1;
- nca.type = NCSI_PKT_CMD_SP;
- nca.bytes[0] = 1;
- nca.package = ndp->active_package->id;
- nca.channel = NCSI_RESERVED_CHANNEL;
- ret = ncsi_xmit_cmd(&nca);
- if (ret)
- goto error;
-
nd->state = ncsi_dev_state_probe_cis;
+ schedule_work(&ndp->work);
break;
case ncsi_dev_state_probe_cis:
ndp->pending_req_num = NCSI_RESERVED_CHANNEL;
@@ -1188,22 +1149,35 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)
case ncsi_dev_state_probe_dp:
ndp->pending_req_num = 1;
- /* Deselect the active package */
+ /* Deselect the current package */
nca.type = NCSI_PKT_CMD_DP;
- nca.package = ndp->active_package->id;
+ nca.package = ndp->package_probe_id;
nca.channel = NCSI_RESERVED_CHANNEL;
ret = ncsi_xmit_cmd(&nca);
if (ret)
goto error;
- /* Scan channels in next package */
- nd->state = ncsi_dev_state_probe_channel;
+ /* Probe next package */
+ ndp->package_probe_id++;
+ if (ndp->package_probe_id >= 8) {
+ /* Probe finished */
+ ndp->flags |= NCSI_DEV_PROBED;
+ break;
+ }
+ nd->state = ncsi_dev_state_probe_package;
+ ndp->active_package = NULL;
break;
default:
netdev_warn(nd->dev, "Wrong NCSI state 0x%0x in enumeration\n",
nd->state);
}
+ if (ndp->flags & NCSI_DEV_PROBED) {
+ /* Check if all packages have HWA support */
+ ncsi_check_hwa(ndp);
+ ncsi_choose_active_channel(ndp);
+ }
+
return;
error:
netdev_err(ndp->ndev.dev,
@@ -1564,6 +1538,7 @@ int ncsi_start_dev(struct ncsi_dev *nd)
return -ENOTTY;
if (!(ndp->flags & NCSI_DEV_PROBED)) {
+ ndp->package_probe_id = 0;
nd->state = ncsi_dev_state_probe;
schedule_work(&ndp->work);
return 0;
--
2.19.1
^ permalink raw reply related
* [PATCH net-next v4 3/6] net/ncsi: Don't deselect package in suspend if active
From: Samuel Mendoza-Jonas @ 2018-11-16 4:51 UTC (permalink / raw)
To: netdev
Cc: Samuel Mendoza-Jonas, David S . Miller, Justin.Lee1, linux-kernel,
openbmc
In-Reply-To: <20181116045159.4980-1-sam@mendozajonas.com>
When a package is deselected all channels of that package cease
communication. If there are other channels active on the package of the
suspended channel this will disable them as well, so only send a
deselect-package command if no other channels are active.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
---
net/ncsi/ncsi-manage.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index 02421d1a22c9..b8b4e765a04c 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -440,12 +440,14 @@ static void ncsi_request_timeout(struct timer_list *t)
static void ncsi_suspend_channel(struct ncsi_dev_priv *ndp)
{
struct ncsi_dev *nd = &ndp->ndev;
- struct ncsi_package *np = ndp->active_package;
- struct ncsi_channel *nc = ndp->active_channel;
+ struct ncsi_package *np;
+ struct ncsi_channel *nc, *tmp;
struct ncsi_cmd_arg nca;
unsigned long flags;
int ret;
+ np = ndp->active_package;
+ nc = ndp->active_channel;
nca.ndp = ndp;
nca.req_flags = NCSI_REQ_FLAG_EVENT_DRIVEN;
switch (nd->state) {
@@ -521,6 +523,15 @@ static void ncsi_suspend_channel(struct ncsi_dev_priv *ndp)
if (ret)
goto error;
+ NCSI_FOR_EACH_CHANNEL(np, tmp) {
+ /* If there is another channel active on this package
+ * do not deselect the package.
+ */
+ if (tmp != nc && tmp->state == NCSI_CHANNEL_ACTIVE) {
+ nd->state = ncsi_dev_state_suspend_done;
+ break;
+ }
+ }
break;
case ncsi_dev_state_suspend_deselect:
ndp->pending_req_num = 1;
--
2.19.1
^ permalink raw reply related
* [PATCH net-next v4 4/6] net/ncsi: Don't mark configured channels inactive
From: Samuel Mendoza-Jonas @ 2018-11-16 4:51 UTC (permalink / raw)
To: netdev
Cc: Samuel Mendoza-Jonas, David S . Miller, Justin.Lee1, linux-kernel,
openbmc
In-Reply-To: <20181116045159.4980-1-sam@mendozajonas.com>
The concepts of a channel being 'active' and it having link are slightly
muddled in the NCSI driver. Tweak this slightly so that
NCSI_CHANNEL_ACTIVE represents a channel that has been configured and
enabled, and NCSI_CHANNEL_INACTIVE represents a de-configured channel.
This distinction is important because a channel can be 'active' but have
its link down; in this case the channel may still need to be configured
so that it may receive AEN link-state-change packets.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
---
net/ncsi/ncsi-aen.c | 17 +++++++++++------
net/ncsi/ncsi-manage.c | 3 +--
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c
index 65f47a648be3..57f77e5d381a 100644
--- a/net/ncsi/ncsi-aen.c
+++ b/net/ncsi/ncsi-aen.c
@@ -57,6 +57,7 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp,
int state;
unsigned long old_data, data;
unsigned long flags;
+ bool had_link, has_link;
/* Find the NCSI channel */
ncsi_find_package_and_channel(ndp, h->common.channel, NULL, &nc);
@@ -73,6 +74,9 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp,
ncm->data[2] = data;
ncm->data[4] = ntohl(lsc->oem_status);
+ had_link = !!(old_data & 0x1);
+ has_link = !!(data & 0x1);
+
netdev_dbg(ndp->ndev.dev, "NCSI: LSC AEN - channel %u state %s\n",
nc->id, data & 0x1 ? "up" : "down");
@@ -80,15 +84,16 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp,
state = nc->state;
spin_unlock_irqrestore(&nc->lock, flags);
- if (!((old_data ^ data) & 0x1) || chained)
- return 0;
- if (!(state == NCSI_CHANNEL_INACTIVE && (data & 0x1)) &&
- !(state == NCSI_CHANNEL_ACTIVE && !(data & 0x1)))
+ if (state == NCSI_CHANNEL_INACTIVE)
+ netdev_warn(ndp->ndev.dev,
+ "NCSI: Inactive channel %u received AEN!\n",
+ nc->id);
+
+ if ((had_link == has_link) || chained)
return 0;
- if (state == NCSI_CHANNEL_ACTIVE)
+ if (had_link)
ndp->flags |= NCSI_DEV_RESHUFFLE;
-
ncsi_stop_channel_monitor(nc);
spin_lock_irqsave(&ndp->lock, flags);
list_add_tail_rcu(&nc->link, &ndp->channel_queue);
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index b8b4e765a04c..b9de5b78c4e9 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -916,12 +916,11 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
break;
}
+ nc->state = NCSI_CHANNEL_ACTIVE;
if (nc->modes[NCSI_MODE_LINK].data[2] & 0x1) {
hot_nc = nc;
- nc->state = NCSI_CHANNEL_ACTIVE;
} else {
hot_nc = NULL;
- nc->state = NCSI_CHANNEL_INACTIVE;
netdev_dbg(ndp->ndev.dev,
"NCSI: channel %u link down after config\n",
nc->id);
--
2.19.1
^ permalink raw reply related
* [PATCH net-next v4 6/6] net/ncsi: Configure multi-package, multi-channel modes with failover
From: Samuel Mendoza-Jonas @ 2018-11-16 4:51 UTC (permalink / raw)
To: netdev
Cc: Samuel Mendoza-Jonas, David S . Miller, Justin.Lee1, linux-kernel,
openbmc
In-Reply-To: <20181116045159.4980-1-sam@mendozajonas.com>
This patch extends the ncsi-netlink interface with two new commands and
three new attributes to configure multiple packages and/or channels at
once, and configure specific failover modes.
NCSI_CMD_SET_PACKAGE mask and NCSI_CMD_SET_CHANNEL_MASK set a whitelist
of packages or channels allowed to be configured with the
NCSI_ATTR_PACKAGE_MASK and NCSI_ATTR_CHANNEL_MASK attributes
respectively. If one of these whitelists is set only packages or
channels matching the whitelist are considered for the channel queue in
ncsi_choose_active_channel().
These commands may also use the NCSI_ATTR_MULTI_FLAG to signal that
multiple packages or channels may be configured simultaneously. NCSI
hardware arbitration (HWA) must be available in order to enable
multi-package mode. Multi-channel mode is always available.
If the NCSI_ATTR_CHANNEL_ID attribute is present in the
NCSI_CMD_SET_CHANNEL_MASK command the it sets the preferred channel as
with the NCSI_CMD_SET_INTERFACE command. The combination of preferred
channel and channel whitelist defines a primary channel and the allowed
failover channels.
If the NCSI_ATTR_MULTI_FLAG attribute is also present then the preferred
channel is configured for Tx/Rx and the other channels are enabled only
for Rx.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
---
include/uapi/linux/ncsi.h | 15 +++
net/ncsi/internal.h | 16 ++-
net/ncsi/ncsi-aen.c | 63 +++++++--
net/ncsi/ncsi-manage.c | 264 +++++++++++++++++++++++++++++++-------
net/ncsi/ncsi-netlink.c | 221 +++++++++++++++++++++++++++----
net/ncsi/ncsi-rsp.c | 2 +-
6 files changed, 493 insertions(+), 88 deletions(-)
diff --git a/include/uapi/linux/ncsi.h b/include/uapi/linux/ncsi.h
index 0a26a5576645..a3f87c54fdb3 100644
--- a/include/uapi/linux/ncsi.h
+++ b/include/uapi/linux/ncsi.h
@@ -26,6 +26,12 @@
* @NCSI_CMD_SEND_CMD: send NC-SI command to network card.
* Requires NCSI_ATTR_IFINDEX, NCSI_ATTR_PACKAGE_ID
* and NCSI_ATTR_CHANNEL_ID.
+ * @NCSI_CMD_SET_PACKAGE_MASK: set a whitelist of allowed packages.
+ * Requires NCSI_ATTR_IFINDEX and NCSI_ATTR_PACKAGE_MASK.
+ * @NCSI_CMD_SET_CHANNEL_MASK: set a whitelist of allowed channels.
+ * Requires NCSI_ATTR_IFINDEX, NCSI_ATTR_PACKAGE_ID, and
+ * NCSI_ATTR_CHANNEL_MASK. If NCSI_ATTR_CHANNEL_ID is present it sets
+ * the primary channel.
* @NCSI_CMD_MAX: highest command number
*/
enum ncsi_nl_commands {
@@ -34,6 +40,8 @@ enum ncsi_nl_commands {
NCSI_CMD_SET_INTERFACE,
NCSI_CMD_CLEAR_INTERFACE,
NCSI_CMD_SEND_CMD,
+ NCSI_CMD_SET_PACKAGE_MASK,
+ NCSI_CMD_SET_CHANNEL_MASK,
__NCSI_CMD_AFTER_LAST,
NCSI_CMD_MAX = __NCSI_CMD_AFTER_LAST - 1
@@ -48,6 +56,10 @@ enum ncsi_nl_commands {
* @NCSI_ATTR_PACKAGE_ID: package ID
* @NCSI_ATTR_CHANNEL_ID: channel ID
* @NCSI_ATTR_DATA: command payload
+ * @NCSI_ATTR_MULTI_FLAG: flag to signal that multi-mode should be enabled with
+ * NCSI_CMD_SET_PACKAGE_MASK or NCSI_CMD_SET_CHANNEL_MASK.
+ * @NCSI_ATTR_PACKAGE_MASK: 32-bit mask of allowed packages.
+ * @NCSI_ATTR_CHANNEL_MASK: 32-bit mask of allowed channels.
* @NCSI_ATTR_MAX: highest attribute number
*/
enum ncsi_nl_attrs {
@@ -57,6 +69,9 @@ enum ncsi_nl_attrs {
NCSI_ATTR_PACKAGE_ID,
NCSI_ATTR_CHANNEL_ID,
NCSI_ATTR_DATA,
+ NCSI_ATTR_MULTI_FLAG,
+ NCSI_ATTR_PACKAGE_MASK,
+ NCSI_ATTR_CHANNEL_MASK,
__NCSI_ATTR_AFTER_LAST,
NCSI_ATTR_MAX = __NCSI_ATTR_AFTER_LAST - 1
diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
index bda51cb179fe..9e3642b802c4 100644
--- a/net/ncsi/internal.h
+++ b/net/ncsi/internal.h
@@ -222,6 +222,10 @@ struct ncsi_package {
unsigned int channel_num; /* Number of channels */
struct list_head channels; /* List of chanels */
struct list_head node; /* Form list of packages */
+
+ bool multi_channel; /* Enable multiple channels */
+ u32 channel_whitelist; /* Channels to configure */
+ struct ncsi_channel *preferred_channel; /* Primary channel */
};
struct ncsi_request {
@@ -297,8 +301,6 @@ struct ncsi_dev_priv {
unsigned int package_num; /* Number of packages */
struct list_head packages; /* List of packages */
struct ncsi_channel *hot_channel; /* Channel was ever active */
- struct ncsi_package *force_package; /* Force a specific package */
- struct ncsi_channel *force_channel; /* Force a specific channel */
struct ncsi_request requests[256]; /* Request table */
unsigned int request_id; /* Last used request ID */
#define NCSI_REQ_START_IDX 1
@@ -311,6 +313,9 @@ struct ncsi_dev_priv {
struct list_head node; /* Form NCSI device list */
#define NCSI_MAX_VLAN_VIDS 15
struct list_head vlan_vids; /* List of active VLAN IDs */
+
+ bool multi_package; /* Enable multiple packages */
+ u32 package_whitelist; /* Packages to configure */
};
struct ncsi_cmd_arg {
@@ -364,6 +369,13 @@ struct ncsi_request *ncsi_alloc_request(struct ncsi_dev_priv *ndp,
void ncsi_free_request(struct ncsi_request *nr);
struct ncsi_dev *ncsi_find_dev(struct net_device *dev);
int ncsi_process_next_channel(struct ncsi_dev_priv *ndp);
+bool ncsi_channel_has_link(struct ncsi_channel *channel);
+bool ncsi_channel_is_last(struct ncsi_dev_priv *ndp,
+ struct ncsi_channel *channel);
+int ncsi_update_tx_channel(struct ncsi_dev_priv *ndp,
+ struct ncsi_package *np,
+ struct ncsi_channel *disable,
+ struct ncsi_channel *enable);
/* Packet handlers */
u32 ncsi_calculate_checksum(unsigned char *data, int len);
diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c
index 57f77e5d381a..26d67e27551f 100644
--- a/net/ncsi/ncsi-aen.c
+++ b/net/ncsi/ncsi-aen.c
@@ -50,14 +50,15 @@ static int ncsi_validate_aen_pkt(struct ncsi_aen_pkt_hdr *h,
static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp,
struct ncsi_aen_pkt_hdr *h)
{
- struct ncsi_aen_lsc_pkt *lsc;
- struct ncsi_channel *nc;
+ struct ncsi_channel *nc, *tmp;
struct ncsi_channel_mode *ncm;
- bool chained;
- int state;
unsigned long old_data, data;
- unsigned long flags;
+ struct ncsi_aen_lsc_pkt *lsc;
+ struct ncsi_package *np;
bool had_link, has_link;
+ unsigned long flags;
+ bool chained;
+ int state;
/* Find the NCSI channel */
ncsi_find_package_and_channel(ndp, h->common.channel, NULL, &nc);
@@ -92,14 +93,52 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp,
if ((had_link == has_link) || chained)
return 0;
- if (had_link)
- ndp->flags |= NCSI_DEV_RESHUFFLE;
- ncsi_stop_channel_monitor(nc);
- spin_lock_irqsave(&ndp->lock, flags);
- list_add_tail_rcu(&nc->link, &ndp->channel_queue);
- spin_unlock_irqrestore(&ndp->lock, flags);
+ if (!ndp->multi_package && !nc->package->multi_channel) {
+ if (had_link) {
+ ndp->flags |= NCSI_DEV_RESHUFFLE;
+ ncsi_stop_channel_monitor(nc);
+ spin_lock_irqsave(&ndp->lock, flags);
+ list_add_tail_rcu(&nc->link, &ndp->channel_queue);
+ spin_unlock_irqrestore(&ndp->lock, flags);
+ return ncsi_process_next_channel(ndp);
+ }
+ /* Configured channel came up */
+ return 0;
+ }
- return ncsi_process_next_channel(ndp);
+ if (had_link) {
+ ncm = &nc->modes[NCSI_MODE_TX_ENABLE];
+ if (ncsi_channel_is_last(ndp, nc)) {
+ /* No channels left, reconfigure */
+ return ncsi_reset_dev(&ndp->ndev);
+ } else if (ncm->enable) {
+ /* Need to failover Tx channel */
+ ncsi_update_tx_channel(ndp, nc->package, nc, NULL);
+ }
+ } else if (has_link && nc->package->preferred_channel == nc) {
+ /* Return Tx to preferred channel */
+ ncsi_update_tx_channel(ndp, nc->package, NULL, nc);
+ } else if (has_link) {
+ NCSI_FOR_EACH_PACKAGE(ndp, np) {
+ NCSI_FOR_EACH_CHANNEL(np, tmp) {
+ /* Enable Tx on this channel if the current Tx
+ * channel is down.
+ */
+ ncm = &tmp->modes[NCSI_MODE_TX_ENABLE];
+ if (ncm->enable &&
+ !ncsi_channel_has_link(tmp)) {
+ ncsi_update_tx_channel(ndp, nc->package,
+ tmp, nc);
+ break;
+ }
+ }
+ }
+ }
+
+ /* Leave configured channels active in a multi-channel scenario so
+ * AEN events are still received.
+ */
+ return 0;
}
static int ncsi_aen_handler_cr(struct ncsi_dev_priv *ndp,
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index c814ce9bb3de..92e59f07f9a7 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -28,6 +28,29 @@
LIST_HEAD(ncsi_dev_list);
DEFINE_SPINLOCK(ncsi_dev_lock);
+bool ncsi_channel_has_link(struct ncsi_channel *channel)
+{
+ return !!(channel->modes[NCSI_MODE_LINK].data[2] & 0x1);
+}
+
+bool ncsi_channel_is_last(struct ncsi_dev_priv *ndp,
+ struct ncsi_channel *channel)
+{
+ struct ncsi_package *np;
+ struct ncsi_channel *nc;
+
+ NCSI_FOR_EACH_PACKAGE(ndp, np)
+ NCSI_FOR_EACH_CHANNEL(np, nc) {
+ if (nc == channel)
+ continue;
+ if (nc->state == NCSI_CHANNEL_ACTIVE &&
+ ncsi_channel_has_link(nc))
+ return false;
+ }
+
+ return true;
+}
+
static void ncsi_report_link(struct ncsi_dev_priv *ndp, bool force_down)
{
struct ncsi_dev *nd = &ndp->ndev;
@@ -52,7 +75,7 @@ static void ncsi_report_link(struct ncsi_dev_priv *ndp, bool force_down)
continue;
}
- if (nc->modes[NCSI_MODE_LINK].data[2] & 0x1) {
+ if (ncsi_channel_has_link(nc)) {
spin_unlock_irqrestore(&nc->lock, flags);
nd->link_up = 1;
goto report;
@@ -267,6 +290,7 @@ struct ncsi_package *ncsi_add_package(struct ncsi_dev_priv *ndp,
np->ndp = ndp;
spin_lock_init(&np->lock);
INIT_LIST_HEAD(&np->channels);
+ np->channel_whitelist = UINT_MAX;
spin_lock_irqsave(&ndp->lock, flags);
tmp = ncsi_find_package(ndp, id);
@@ -728,13 +752,144 @@ static int ncsi_gma_handler(struct ncsi_cmd_arg *nca, unsigned int mf_id)
#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */
+/* Determine if a given channel from the channel_queue should be used for Tx */
+static bool ncsi_channel_is_tx(struct ncsi_dev_priv *ndp,
+ struct ncsi_channel *nc)
+{
+ struct ncsi_channel_mode *ncm;
+ struct ncsi_channel *channel;
+ struct ncsi_package *np;
+
+ /* Check if any other channel has Tx enabled; a channel may have already
+ * been configured and removed from the channel queue.
+ */
+ NCSI_FOR_EACH_PACKAGE(ndp, np) {
+ if (!ndp->multi_package && np != nc->package)
+ continue;
+ NCSI_FOR_EACH_CHANNEL(np, channel) {
+ ncm = &channel->modes[NCSI_MODE_TX_ENABLE];
+ if (ncm->enable)
+ return false;
+ }
+ }
+
+ /* This channel is the preferred channel and has link */
+ list_for_each_entry_rcu(channel, &ndp->channel_queue, link) {
+ np = channel->package;
+ if (np->preferred_channel &&
+ ncsi_channel_has_link(np->preferred_channel)) {
+ return np->preferred_channel == nc;
+ }
+ }
+
+ /* This channel has link */
+ if (ncsi_channel_has_link(nc))
+ return true;
+
+ list_for_each_entry_rcu(channel, &ndp->channel_queue, link)
+ if (ncsi_channel_has_link(channel))
+ return false;
+
+ /* No other channel has link; default to this one */
+ return true;
+}
+
+/* Change the active Tx channel in a multi-channel setup */
+int ncsi_update_tx_channel(struct ncsi_dev_priv *ndp,
+ struct ncsi_package *package,
+ struct ncsi_channel *disable,
+ struct ncsi_channel *enable)
+{
+ struct ncsi_cmd_arg nca;
+ struct ncsi_channel *nc;
+ struct ncsi_package *np;
+ int ret = 0;
+
+ if (!package->multi_channel && !ndp->multi_package)
+ netdev_warn(ndp->ndev.dev,
+ "NCSI: Trying to update Tx channel in single-channel mode\n");
+ nca.ndp = ndp;
+ nca.req_flags = 0;
+
+ /* Find current channel with Tx enabled */
+ NCSI_FOR_EACH_PACKAGE(ndp, np) {
+ if (disable)
+ break;
+ if (!ndp->multi_package && np != package)
+ continue;
+
+ NCSI_FOR_EACH_CHANNEL(np, nc)
+ if (nc->modes[NCSI_MODE_TX_ENABLE].enable) {
+ disable = nc;
+ break;
+ }
+ }
+
+ /* Find a suitable channel for Tx */
+ NCSI_FOR_EACH_PACKAGE(ndp, np) {
+ if (enable)
+ break;
+ if (!ndp->multi_package && np != package)
+ continue;
+ if (!(ndp->package_whitelist & (0x1 << np->id)))
+ continue;
+
+ if (np->preferred_channel &&
+ ncsi_channel_has_link(np->preferred_channel)) {
+ enable = np->preferred_channel;
+ break;
+ }
+
+ NCSI_FOR_EACH_CHANNEL(np, nc) {
+ if (!(np->channel_whitelist & 0x1 << nc->id))
+ continue;
+ if (nc->state != NCSI_CHANNEL_ACTIVE)
+ continue;
+ if (ncsi_channel_has_link(nc)) {
+ enable = nc;
+ break;
+ }
+ }
+ }
+
+ if (disable == enable)
+ return -1;
+
+ if (!enable)
+ return -1;
+
+ if (disable) {
+ nca.channel = disable->id;
+ nca.package = disable->package->id;
+ nca.type = NCSI_PKT_CMD_DCNT;
+ ret = ncsi_xmit_cmd(&nca);
+ if (ret)
+ netdev_err(ndp->ndev.dev,
+ "Error %d sending DCNT\n",
+ ret);
+ }
+
+ netdev_info(ndp->ndev.dev, "NCSI: channel %u enables Tx\n", enable->id);
+
+ nca.channel = enable->id;
+ nca.package = enable->package->id;
+ nca.type = NCSI_PKT_CMD_ECNT;
+ ret = ncsi_xmit_cmd(&nca);
+ if (ret)
+ netdev_err(ndp->ndev.dev,
+ "Error %d sending ECNT\n",
+ ret);
+
+ return ret;
+}
+
static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
{
- struct ncsi_dev *nd = &ndp->ndev;
- struct net_device *dev = nd->dev;
struct ncsi_package *np = ndp->active_package;
struct ncsi_channel *nc = ndp->active_channel;
struct ncsi_channel *hot_nc = NULL;
+ struct ncsi_dev *nd = &ndp->ndev;
+ struct net_device *dev = nd->dev;
struct ncsi_cmd_arg nca;
unsigned char index;
unsigned long flags;
@@ -856,20 +1011,29 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
} else if (nd->state == ncsi_dev_state_config_ebf) {
nca.type = NCSI_PKT_CMD_EBF;
nca.dwords[0] = nc->caps[NCSI_CAP_BC].cap;
- nd->state = ncsi_dev_state_config_ecnt;
+ if (ncsi_channel_is_tx(ndp, nc))
+ nd->state = ncsi_dev_state_config_ecnt;
+ else
+ nd->state = ncsi_dev_state_config_ec;
#if IS_ENABLED(CONFIG_IPV6)
if (ndp->inet6_addr_num > 0 &&
(nc->caps[NCSI_CAP_GENERIC].cap &
NCSI_CAP_GENERIC_MC))
nd->state = ncsi_dev_state_config_egmf;
- else
- nd->state = ncsi_dev_state_config_ecnt;
} else if (nd->state == ncsi_dev_state_config_egmf) {
nca.type = NCSI_PKT_CMD_EGMF;
nca.dwords[0] = nc->caps[NCSI_CAP_MC].cap;
- nd->state = ncsi_dev_state_config_ecnt;
+ if (ncsi_channel_is_tx(ndp, nc))
+ nd->state = ncsi_dev_state_config_ecnt;
+ else
+ nd->state = ncsi_dev_state_config_ec;
#endif /* CONFIG_IPV6 */
} else if (nd->state == ncsi_dev_state_config_ecnt) {
+ if (np->preferred_channel &&
+ nc != np->preferred_channel)
+ netdev_info(ndp->ndev.dev,
+ "NCSI: Tx failed over to channel %u\n",
+ nc->id);
nca.type = NCSI_PKT_CMD_ECNT;
nd->state = ncsi_dev_state_config_ec;
} else if (nd->state == ncsi_dev_state_config_ec) {
@@ -959,43 +1123,35 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
static int ncsi_choose_active_channel(struct ncsi_dev_priv *ndp)
{
- struct ncsi_package *np, *force_package;
- struct ncsi_channel *nc, *found, *hot_nc, *force_channel;
+ struct ncsi_channel *nc, *found, *hot_nc;
struct ncsi_channel_mode *ncm;
- unsigned long flags;
+ unsigned long flags, cflags;
+ struct ncsi_package *np;
+ bool with_link;
spin_lock_irqsave(&ndp->lock, flags);
hot_nc = ndp->hot_channel;
- force_channel = ndp->force_channel;
- force_package = ndp->force_package;
spin_unlock_irqrestore(&ndp->lock, flags);
- /* Force a specific channel whether or not it has link if we have been
- * configured to do so
- */
- if (force_package && force_channel) {
- found = force_channel;
- ncm = &found->modes[NCSI_MODE_LINK];
- if (!(ncm->data[2] & 0x1))
- netdev_info(ndp->ndev.dev,
- "NCSI: Channel %u forced, but it is link down\n",
- found->id);
- goto out;
- }
-
- /* The search is done once an inactive channel with up
- * link is found.
+ /* By default the search is done once an inactive channel with up
+ * link is found, unless a preferred channel is set.
+ * If multi_package or multi_channel are configured all channels in the
+ * whitelist are added to the channel queue.
*/
found = NULL;
+ with_link = false;
NCSI_FOR_EACH_PACKAGE(ndp, np) {
- if (ndp->force_package && np != ndp->force_package)
+ if (!(ndp->package_whitelist & (0x1 << np->id)))
continue;
NCSI_FOR_EACH_CHANNEL(np, nc) {
- spin_lock_irqsave(&nc->lock, flags);
+ if (!(np->channel_whitelist & (0x1 << nc->id)))
+ continue;
+
+ spin_lock_irqsave(&nc->lock, cflags);
if (!list_empty(&nc->link) ||
nc->state != NCSI_CHANNEL_INACTIVE) {
- spin_unlock_irqrestore(&nc->lock, flags);
+ spin_unlock_irqrestore(&nc->lock, cflags);
continue;
}
@@ -1007,32 +1163,49 @@ static int ncsi_choose_active_channel(struct ncsi_dev_priv *ndp)
ncm = &nc->modes[NCSI_MODE_LINK];
if (ncm->data[2] & 0x1) {
- spin_unlock_irqrestore(&nc->lock, flags);
found = nc;
- goto out;
+ with_link = true;
}
- spin_unlock_irqrestore(&nc->lock, flags);
+ /* If multi_channel is enabled configure all valid
+ * channels whether or not they currently have link
+ * so they will have AENs enabled.
+ */
+ if (with_link || np->multi_channel) {
+ spin_lock_irqsave(&ndp->lock, flags);
+ list_add_tail_rcu(&nc->link,
+ &ndp->channel_queue);
+ spin_unlock_irqrestore(&ndp->lock, flags);
+
+ netdev_dbg(ndp->ndev.dev,
+ "NCSI: Channel %u added to queue (link %s)\n",
+ nc->id,
+ ncm->data[2] & 0x1 ? "up" : "down");
+ }
+
+ spin_unlock_irqrestore(&nc->lock, cflags);
+
+ if (with_link && !np->multi_channel)
+ break;
}
+ if (with_link && !ndp->multi_package)
+ break;
}
- if (!found) {
+ if (list_empty(&ndp->channel_queue) && found) {
+ netdev_info(ndp->ndev.dev,
+ "NCSI: No channel with link found, configuring channel %u\n",
+ found->id);
+ spin_lock_irqsave(&ndp->lock, flags);
+ list_add_tail_rcu(&found->link, &ndp->channel_queue);
+ spin_unlock_irqrestore(&ndp->lock, flags);
+ } else if (!found) {
netdev_warn(ndp->ndev.dev,
- "NCSI: No channel found with link\n");
+ "NCSI: No channel found to configure!\n");
ncsi_report_link(ndp, true);
return -ENODEV;
}
- ncm = &found->modes[NCSI_MODE_LINK];
- netdev_dbg(ndp->ndev.dev,
- "NCSI: Channel %u added to queue (link %s)\n",
- found->id, ncm->data[2] & 0x1 ? "up" : "down");
-
-out:
- spin_lock_irqsave(&ndp->lock, flags);
- list_add_tail_rcu(&found->link, &ndp->channel_queue);
- spin_unlock_irqrestore(&ndp->lock, flags);
-
return ncsi_process_next_channel(ndp);
}
@@ -1517,6 +1690,7 @@ struct ncsi_dev *ncsi_register_dev(struct net_device *dev,
INIT_LIST_HEAD(&ndp->channel_queue);
INIT_LIST_HEAD(&ndp->vlan_vids);
INIT_WORK(&ndp->work, ncsi_dev_work);
+ ndp->package_whitelist = UINT_MAX;
/* Initialize private NCSI device */
spin_lock_init(&ndp->lock);
diff --git a/net/ncsi/ncsi-netlink.c b/net/ncsi/ncsi-netlink.c
index cde48fe43dba..5d782445d2fc 100644
--- a/net/ncsi/ncsi-netlink.c
+++ b/net/ncsi/ncsi-netlink.c
@@ -30,6 +30,9 @@ static const struct nla_policy ncsi_genl_policy[NCSI_ATTR_MAX + 1] = {
[NCSI_ATTR_PACKAGE_ID] = { .type = NLA_U32 },
[NCSI_ATTR_CHANNEL_ID] = { .type = NLA_U32 },
[NCSI_ATTR_DATA] = { .type = NLA_BINARY, .len = 2048 },
+ [NCSI_ATTR_MULTI_FLAG] = { .type = NLA_FLAG },
+ [NCSI_ATTR_PACKAGE_MASK] = { .type = NLA_U32 },
+ [NCSI_ATTR_CHANNEL_MASK] = { .type = NLA_U32 },
};
static struct ncsi_dev_priv *ndp_from_ifindex(struct net *net, u32 ifindex)
@@ -69,7 +72,7 @@ static int ncsi_write_channel_info(struct sk_buff *skb,
nla_put_u32(skb, NCSI_CHANNEL_ATTR_LINK_STATE, m->data[2]);
if (nc->state == NCSI_CHANNEL_ACTIVE)
nla_put_flag(skb, NCSI_CHANNEL_ATTR_ACTIVE);
- if (ndp->force_channel == nc)
+ if (nc == nc->package->preferred_channel)
nla_put_flag(skb, NCSI_CHANNEL_ATTR_FORCED);
nla_put_u32(skb, NCSI_CHANNEL_ATTR_VERSION_MAJOR, nc->version.version);
@@ -114,7 +117,7 @@ static int ncsi_write_package_info(struct sk_buff *skb,
if (!pnest)
return -ENOMEM;
nla_put_u32(skb, NCSI_PKG_ATTR_ID, np->id);
- if (ndp->force_package == np)
+ if ((0x1 << np->id) == ndp->package_whitelist)
nla_put_flag(skb, NCSI_PKG_ATTR_FORCED);
cnest = nla_nest_start(skb, NCSI_PKG_ATTR_CHANNEL_LIST);
if (!cnest) {
@@ -290,45 +293,54 @@ static int ncsi_set_interface_nl(struct sk_buff *msg, struct genl_info *info)
package_id = nla_get_u32(info->attrs[NCSI_ATTR_PACKAGE_ID]);
package = NULL;
- spin_lock_irqsave(&ndp->lock, flags);
-
NCSI_FOR_EACH_PACKAGE(ndp, np)
if (np->id == package_id)
package = np;
if (!package) {
/* The user has set a package that does not exist */
- spin_unlock_irqrestore(&ndp->lock, flags);
return -ERANGE;
}
channel = NULL;
- if (!info->attrs[NCSI_ATTR_CHANNEL_ID]) {
- /* Allow any channel */
- channel_id = NCSI_RESERVED_CHANNEL;
- } else {
+ if (info->attrs[NCSI_ATTR_CHANNEL_ID]) {
channel_id = nla_get_u32(info->attrs[NCSI_ATTR_CHANNEL_ID]);
NCSI_FOR_EACH_CHANNEL(package, nc)
- if (nc->id == channel_id)
+ if (nc->id == channel_id) {
channel = nc;
+ break;
+ }
+ if (!channel) {
+ netdev_info(ndp->ndev.dev,
+ "NCSI: Channel %u does not exist!\n",
+ channel_id);
+ return -ERANGE;
+ }
}
- if (channel_id != NCSI_RESERVED_CHANNEL && !channel) {
- /* The user has set a channel that does not exist on this
- * package
- */
- spin_unlock_irqrestore(&ndp->lock, flags);
- netdev_info(ndp->ndev.dev, "NCSI: Channel %u does not exist!\n",
- channel_id);
- return -ERANGE;
- }
-
- ndp->force_package = package;
- ndp->force_channel = channel;
+ spin_lock_irqsave(&ndp->lock, flags);
+ ndp->package_whitelist = 0x1 << package->id;
+ ndp->multi_package = false;
spin_unlock_irqrestore(&ndp->lock, flags);
- netdev_info(ndp->ndev.dev, "Set package 0x%x, channel 0x%x%s as preferred\n",
- package_id, channel_id,
- channel_id == NCSI_RESERVED_CHANNEL ? " (any)" : "");
+ spin_lock_irqsave(&package->lock, flags);
+ package->multi_channel = false;
+ if (channel) {
+ package->channel_whitelist = 0x1 << channel->id;
+ package->preferred_channel = channel;
+ } else {
+ /* Allow any channel */
+ package->channel_whitelist = UINT_MAX;
+ package->preferred_channel = NULL;
+ }
+ spin_unlock_irqrestore(&package->lock, flags);
+
+ if (channel)
+ netdev_info(ndp->ndev.dev,
+ "Set package 0x%x, channel 0x%x as preferred\n",
+ package_id, channel_id);
+ else
+ netdev_info(ndp->ndev.dev, "Set package 0x%x as preferred\n",
+ package_id);
/* Update channel configuration */
if (!(ndp->flags & NCSI_DEV_RESET))
@@ -340,6 +352,7 @@ static int ncsi_set_interface_nl(struct sk_buff *msg, struct genl_info *info)
static int ncsi_clear_interface_nl(struct sk_buff *msg, struct genl_info *info)
{
struct ncsi_dev_priv *ndp;
+ struct ncsi_package *np;
unsigned long flags;
if (!info || !info->attrs)
@@ -353,11 +366,19 @@ static int ncsi_clear_interface_nl(struct sk_buff *msg, struct genl_info *info)
if (!ndp)
return -ENODEV;
- /* Clear any override */
+ /* Reset any whitelists and disable multi mode */
spin_lock_irqsave(&ndp->lock, flags);
- ndp->force_package = NULL;
- ndp->force_channel = NULL;
+ ndp->package_whitelist = UINT_MAX;
+ ndp->multi_package = false;
spin_unlock_irqrestore(&ndp->lock, flags);
+
+ NCSI_FOR_EACH_PACKAGE(ndp, np) {
+ spin_lock_irqsave(&np->lock, flags);
+ np->multi_channel = false;
+ np->channel_whitelist = UINT_MAX;
+ np->preferred_channel = NULL;
+ spin_unlock_irqrestore(&np->lock, flags);
+ }
netdev_info(ndp->ndev.dev, "NCSI: Cleared preferred package/channel\n");
/* Update channel configuration */
@@ -563,6 +584,138 @@ int ncsi_send_netlink_err(struct net_device *dev,
return nlmsg_unicast(net->genl_sock, skb, snd_portid);
}
+static int ncsi_set_package_mask_nl(struct sk_buff *msg,
+ struct genl_info *info)
+{
+ struct ncsi_dev_priv *ndp;
+ unsigned long flags;
+ int rc;
+
+ if (!info || !info->attrs)
+ return -EINVAL;
+
+ if (!info->attrs[NCSI_ATTR_IFINDEX])
+ return -EINVAL;
+
+ if (!info->attrs[NCSI_ATTR_PACKAGE_MASK])
+ return -EINVAL;
+
+ ndp = ndp_from_ifindex(get_net(sock_net(msg->sk)),
+ nla_get_u32(info->attrs[NCSI_ATTR_IFINDEX]));
+ if (!ndp)
+ return -ENODEV;
+
+ spin_lock_irqsave(&ndp->lock, flags);
+ if (nla_get_flag(info->attrs[NCSI_ATTR_MULTI_FLAG])) {
+ if (ndp->flags & NCSI_DEV_HWA) {
+ ndp->multi_package = true;
+ rc = 0;
+ } else {
+ netdev_err(ndp->ndev.dev,
+ "NCSI: Can't use multiple packages without HWA\n");
+ rc = -EPERM;
+ }
+ } else {
+ ndp->multi_package = false;
+ rc = 0;
+ }
+
+ if (!rc)
+ ndp->package_whitelist =
+ nla_get_u32(info->attrs[NCSI_ATTR_PACKAGE_MASK]);
+ spin_unlock_irqrestore(&ndp->lock, flags);
+
+ if (!rc) {
+ /* Update channel configuration */
+ if (!(ndp->flags & NCSI_DEV_RESET))
+ ncsi_reset_dev(&ndp->ndev);
+ }
+
+ return rc;
+}
+
+static int ncsi_set_channel_mask_nl(struct sk_buff *msg,
+ struct genl_info *info)
+{
+ struct ncsi_package *np, *package;
+ struct ncsi_channel *nc, *channel;
+ u32 package_id, channel_id;
+ struct ncsi_dev_priv *ndp;
+ unsigned long flags;
+
+ if (!info || !info->attrs)
+ return -EINVAL;
+
+ if (!info->attrs[NCSI_ATTR_IFINDEX])
+ return -EINVAL;
+
+ if (!info->attrs[NCSI_ATTR_PACKAGE_ID])
+ return -EINVAL;
+
+ if (!info->attrs[NCSI_ATTR_CHANNEL_MASK])
+ return -EINVAL;
+
+ ndp = ndp_from_ifindex(get_net(sock_net(msg->sk)),
+ nla_get_u32(info->attrs[NCSI_ATTR_IFINDEX]));
+ if (!ndp)
+ return -ENODEV;
+
+ package_id = nla_get_u32(info->attrs[NCSI_ATTR_PACKAGE_ID]);
+ package = NULL;
+ NCSI_FOR_EACH_PACKAGE(ndp, np)
+ if (np->id == package_id) {
+ package = np;
+ break;
+ }
+ if (!package)
+ return -ERANGE;
+
+ spin_lock_irqsave(&package->lock, flags);
+
+ channel = NULL;
+ if (info->attrs[NCSI_ATTR_CHANNEL_ID]) {
+ channel_id = nla_get_u32(info->attrs[NCSI_ATTR_CHANNEL_ID]);
+ NCSI_FOR_EACH_CHANNEL(np, nc)
+ if (nc->id == channel_id) {
+ channel = nc;
+ break;
+ }
+ if (!channel) {
+ spin_unlock_irqrestore(&package->lock, flags);
+ return -ERANGE;
+ }
+ netdev_dbg(ndp->ndev.dev,
+ "NCSI: Channel %u set as preferred channel\n",
+ channel->id);
+ }
+
+ package->channel_whitelist =
+ nla_get_u32(info->attrs[NCSI_ATTR_CHANNEL_MASK]);
+ if (package->channel_whitelist == 0)
+ netdev_dbg(ndp->ndev.dev,
+ "NCSI: Package %u set to all channels disabled\n",
+ package->id);
+
+ package->preferred_channel = channel;
+
+ if (nla_get_flag(info->attrs[NCSI_ATTR_MULTI_FLAG])) {
+ package->multi_channel = true;
+ netdev_info(ndp->ndev.dev,
+ "NCSI: Multi-channel enabled on package %u\n",
+ package_id);
+ } else {
+ package->multi_channel = false;
+ }
+
+ spin_unlock_irqrestore(&package->lock, flags);
+
+ /* Update channel configuration */
+ if (!(ndp->flags & NCSI_DEV_RESET))
+ ncsi_reset_dev(&ndp->ndev);
+
+ return 0;
+}
+
static const struct genl_ops ncsi_ops[] = {
{
.cmd = NCSI_CMD_PKG_INFO,
@@ -589,6 +742,18 @@ static const struct genl_ops ncsi_ops[] = {
.doit = ncsi_send_cmd_nl,
.flags = GENL_ADMIN_PERM,
},
+ {
+ .cmd = NCSI_CMD_SET_PACKAGE_MASK,
+ .policy = ncsi_genl_policy,
+ .doit = ncsi_set_package_mask_nl,
+ .flags = GENL_ADMIN_PERM,
+ },
+ {
+ .cmd = NCSI_CMD_SET_CHANNEL_MASK,
+ .policy = ncsi_genl_policy,
+ .doit = ncsi_set_channel_mask_nl,
+ .flags = GENL_ADMIN_PERM,
+ },
};
static struct genl_family ncsi_genl_family __ro_after_init = {
diff --git a/net/ncsi/ncsi-rsp.c b/net/ncsi/ncsi-rsp.c
index 77e07ba3f493..de7737a27889 100644
--- a/net/ncsi/ncsi-rsp.c
+++ b/net/ncsi/ncsi-rsp.c
@@ -256,7 +256,7 @@ static int ncsi_rsp_handler_dcnt(struct ncsi_request *nr)
if (!ncm->enable)
return 0;
- ncm->enable = 1;
+ ncm->enable = 0;
return 0;
}
--
2.19.1
^ permalink raw reply related
* Re: [PATCH v3 net-next 0/4] net: batched receive in GRO path
From: Edward Cree @ 2018-11-15 18:43 UTC (permalink / raw)
To: Eric Dumazet, linux-net-drivers, davem; +Cc: netdev
In-Reply-To: <a7362654-a47b-1ba9-24d1-227adbe3c7ed@gmail.com>
On 15/11/18 07:22, Eric Dumazet wrote:
> On 11/14/2018 10:07 AM, Edward Cree wrote:
>> Conclusion:
>> * TCP b/w is 16.5% faster for traffic which cannot be coalesced by GRO.
> But only for traffic that actually was perfect GRO candidate, right ?
>
> Now what happens if all the packets you are batching are hitting different TCP sockets ?
The batch is already split up by the time it hits TCP sockets; batching
currently only goes as far as ip_sublist_rcv_finish() which calls
dst_input(skb) in a loop. So as long as the packets are all for the
same dst IP, we should get all of this gain.
If the packets have different dst IP addresses then we split the batch
slightly earlier, in ip_list_rcv_finish(), but that won't make very
much difference, I expect we'll still get most of this gain. There is
a lot of the stack (layer 2 stuff, taps, etc.) that we still traverse
as a batch.
> By the time we build a list of 64 packets, the first packets in the list wont be anymore
> in L1 cache (32 KB 8-way associative typically), and we will probably have cache trashing.
Most of the packet isn't touched and thus won't be brought into cache.
Only the headers of each packet (worst-case let's say 256 bytes) will
be touched during batch processing, that's 16kB. And not all at once
i.e. by the time we touch the later cachelines of a packet we'll be
done with the earlier ones except maybe in cases where GRO decides
very late on that it can't coalesce.
And since the alternative is thrashing of the I$ cache, I don't think
there's an a priori argument that this will hurt — and my tests seem
to indicate that it's OK and that we gain more from better I$ usage
than we lose from worse D$ usage patterns.
If you think there are cases in which the latter will dominate, please
suggest some tests that will embody them; I'm happy to keep running
experiments. Also you could come up with an analogue of patch #2 for
whatever HW you have (it shouldn't be difficult) allowing you to run
your own tests (e.g. if you have bigger/more powerful test rigs than
I have access to ;-)
-Ed
^ permalink raw reply
* Re: pending-fixes build: 1 failures 5 warnings (v4.20-rc2-261-g59a9ebee0952)
From: Mark Brown @ 2018-11-15 19:11 UTC (permalink / raw)
To: Michal Kalderon, Denis Bolotin, David S. Miller
Cc: kernel-build-reports, linaro-kernel, linux-next, netdev
In-Reply-To: <E1gNL0I-0001Co-1g@optimist>
[-- Attachment #1: Type: text/plain, Size: 768 bytes --]
On Thu, Nov 15, 2018 at 05:00:30PM +0000, Build bot for Mark Brown wrote:
Today's pending-fixes branch fails to build an arm allmodconfig due to:
> arm-allmodconfig
> ../drivers/net/ethernet/qlogic/qed/qed_rdma.h:186:79: error: expected ';' before '}' token
> ../drivers/net/ethernet/qlogic/qed/qed_rdma.h:186:79: error: expected ';' before '}' token
> ../drivers/net/ethernet/qlogic/qed/qed_rdma.h:186:79: error: expected ';' before '}' token
> ../drivers/net/ethernet/qlogic/qed/qed_rdma.h:186:79: error: expected ';' before '}' token
> ../drivers/net/ethernet/qlogic/qed/qed_rdma.h:186:79: error: expected ';' before '}' token
caused by 291d57f67d2449737 (qed: Fix rdma_info structure allocation) -
there's a simple typo in the !QED_RDMA stubs that were added.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply
* Re: [PATCH net] ipv6: fix a dst leak when removing its exception
From: Mika Penttilä @ 2018-11-15 19:13 UTC (permalink / raw)
To: David Ahern, Xin Long; +Cc: network dev, davem
In-Reply-To: <b7fbce37-5de0-0770-f7a0-1c3ed680431e@cumulusnetworks.com>
On 15.11.2018 20.17, David Ahern wrote:
> On 11/14/18 11:23 PM, Xin Long wrote:
>> On Thu, Nov 15, 2018 at 3:33 PM David Ahern <dsa@cumulusnetworks.com> wrote:
>>> On 11/14/18 11:03 AM, David Ahern wrote:
>>>> On 11/13/18 8:48 AM, Xin Long wrote:
>>>>> These is no need to hold dst before calling rt6_remove_exception_rt().
>>>>> The call to dst_hold_safe() in ip6_link_failure() was for ip6_del_rt(),
>>>>> which has been removed in Commit 93531c674315 ("net/ipv6: separate
>>>>> handling of FIB entries from dst based routes"). Otherwise, it will
>>>>> cause a dst leak.
>>>>>
>>>>> This patch is to simply remove the dst_hold_safe() call before calling
>>>>> rt6_remove_exception_rt() and also do the same in ip6_del_cached_rt().
>>>>> It's safe, because the removal of the exception that holds its dst's
>>>>> refcnt is protected by rt6_exception_lock.
>>>>>
>>>>> Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes")
>>>>> Fixes: 23fb93a4d3f1 ("net/ipv6: Cleanup exception and cache route handling")
>>>>> Reported-by: Li Shuang <shuali@redhat.com>
>>>>> Signed-off-by: Xin Long <lucien.xin@gmail.com>
>>>>> ---
>>>>> net/ipv6/route.c | 7 +++----
>>>>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>>> was this problem actually hit or is this patch based on a code analysis?
>>>>
>>> I ask because I have not been able to reproduce the leak using existing
>>> tests (e.g., pmtu) that I know create exceptions.
>>>
>>> If this problem was hit, it would be good to get a test case for it.
>> The attachment is the ip6_dst.sh with IPVS.
>>
>> # sh ip6_dst.sh
>>
>> But this one triggers the kernel warnings caused by 2 places:
>> unregister_netdevice: waiting for br0 to become free. Usage count = 3
>>
>> 1. one is IPVS, I just posted the fix:
>> https://patchwork.ozlabs.org/patch/998123/ [1]
>> 2. the other one is IPv6,
>> ip6_link_failure() will be hit.
>>
>> So to make this reproduce clearly, you may want to apply
>> patch [1] firstly.
>>
> Thanks for the script. It does not replicate the problem using net-next
> tree as of
>
> commit 6d5db6c37929cb0a84e64ba0590a74593e5ce3b8
> Merge: 15cef30974c5 bd3b5d462add
> Author: David S. Miller <davem@davemloft.net>
> Date: Wed Nov 14 08:51:28 2018 -0800
>
> Merge branch 'nfp-abm-track-all-Qdiscs'
>
>
> I would be really surprised if the fib6_info change introduced a need to
> change the dst hold's for exception routes. I am not seeing the
> connection, so I really want to see it reproduced.
>
> Thanks
Maybe it's not 100% reproducer then, but I think the fix is obviously right.
--Mika
^ permalink raw reply
* Re: [net-next 00/11][pull request] 100GbE Intel Wired LAN Driver Updates 2018-11-13
From: David Miller @ 2018-11-15 19:24 UTC (permalink / raw)
To: jeffrey.t.kirsher; +Cc: netdev, nhorman, sassmann
In-Reply-To: <20181113183239.5861-1-jeffrey.t.kirsher@intel.com>
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 13 Nov 2018 10:32:28 -0800
> This series contains updates to the ice driver only.
Pulled, thanks Jeff.
^ permalink raw reply
* [PATCH iproute2-next] drop support for IPX
From: Stephen Hemminger @ 2018-11-15 19:26 UTC (permalink / raw)
To: netdev; +Cc: Stephen Hemminger, Stephen Hemminger
IPX has been depracted then removed from upstream kernels.
Drop support from ip route as well.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
Makefile | 3 --
include/utils.h | 10 -----
ip/ip.c | 4 +-
ip/iproute.c | 2 +-
lib/ipx_ntop.c | 71 -------------------------------
lib/ipx_pton.c | 97 ------------------------------------------
lib/utils.c | 2 -
man/man8/ip-route.8.in | 2 +-
man/man8/ip.8 | 9 +---
9 files changed, 5 insertions(+), 195 deletions(-)
delete mode 100644 lib/ipx_ntop.c
delete mode 100644 lib/ipx_pton.c
diff --git a/Makefile b/Makefile
index b7488addc6f2..7d62468c6638 100644
--- a/Makefile
+++ b/Makefile
@@ -43,9 +43,6 @@ DEFINES+=-DCONFDIR=\"$(CONFDIR)\" \
#options for decnet
ADDLIB+=dnet_ntop.o dnet_pton.o
-#options for ipx
-ADDLIB+=ipx_ntop.o ipx_pton.o
-
#options for mpls
ADDLIB+=mpls_ntop.o mpls_pton.o
diff --git a/include/utils.h b/include/utils.h
index bf6dea23df66..12c003c874c4 100644
--- a/include/utils.h
+++ b/include/utils.h
@@ -116,13 +116,6 @@ struct dn_naddr
unsigned char a_addr[DN_MAXADDL];
};
-#define IPX_NODE_LEN 6
-
-struct ipx_addr {
- u_int32_t ipx_net;
- u_int8_t ipx_node[IPX_NODE_LEN];
-};
-
#ifndef AF_MPLS
# define AF_MPLS 28
#endif
@@ -207,9 +200,6 @@ int inet_addr_match_rta(const inet_prefix *m, const struct rtattr *rta);
const char *dnet_ntop(int af, const void *addr, char *str, size_t len);
int dnet_pton(int af, const char *src, void *addr);
-const char *ipx_ntop(int af, const void *addr, char *str, size_t len);
-int ipx_pton(int af, const char *src, void *addr);
-
const char *mpls_ntop(int af, const void *addr, char *str, size_t len);
int mpls_pton(int af, const char *src, void *addr, size_t alen);
diff --git a/ip/ip.c b/ip/ip.c
index c324120f9fc5..11dbed72842f 100644
--- a/ip/ip.c
+++ b/ip/ip.c
@@ -53,7 +53,7 @@ static void usage(void)
" vrf | sr }\n"
" OPTIONS := { -V[ersion] | -s[tatistics] | -d[etails] | -r[esolve] |\n"
" -h[uman-readable] | -iec | -j[son] | -p[retty] |\n"
-" -f[amily] { inet | inet6 | ipx | dnet | mpls | bridge | link } |\n"
+" -f[amily] { inet | inet6 | dnet | mpls | bridge | link } |\n"
" -4 | -6 | -I | -D | -M | -B | -0 |\n"
" -l[oops] { maximum-addr-flush-attempts } | -br[ief] |\n"
" -o[neline] | -t[imestamp] | -ts[hort] | -b[atch] [filename] |\n"
@@ -225,8 +225,6 @@ int main(int argc, char **argv)
preferred_family = AF_INET6;
} else if (strcmp(opt, "-0") == 0) {
preferred_family = AF_PACKET;
- } else if (strcmp(opt, "-I") == 0) {
- preferred_family = AF_IPX;
} else if (strcmp(opt, "-D") == 0) {
preferred_family = AF_DECnet;
} else if (strcmp(opt, "-M") == 0) {
diff --git a/ip/iproute.c b/ip/iproute.c
index b039f35b0ccd..26f7cd8915bf 100644
--- a/ip/iproute.c
+++ b/ip/iproute.c
@@ -83,7 +83,7 @@ static void usage(void)
"INFO_SPEC := NH OPTIONS FLAGS [ nexthop NH ]...\n"
"NH := [ encap ENCAPTYPE ENCAPHDR ] [ via [ FAMILY ] ADDRESS ]\n"
" [ dev STRING ] [ weight NUMBER ] NHFLAGS\n"
- "FAMILY := [ inet | inet6 | ipx | dnet | mpls | bridge | link ]\n"
+ "FAMILY := [ inet | inet6 | dnet | mpls | bridge | link ]\n"
"OPTIONS := FLAGS [ mtu NUMBER ] [ advmss NUMBER ] [ as [ to ] ADDRESS ]\n"
" [ rtt TIME ] [ rttvar TIME ] [ reordering NUMBER ]\n"
" [ window NUMBER ] [ cwnd NUMBER ] [ initcwnd NUMBER ]\n"
diff --git a/lib/ipx_ntop.c b/lib/ipx_ntop.c
deleted file mode 100644
index 80b8a34e1a70..000000000000
--- a/lib/ipx_ntop.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-
-#include "utils.h"
-
-static __inline__ int do_digit(char *str, u_int32_t addr, u_int32_t scale, size_t *pos, size_t len)
-{
- u_int32_t tmp = addr >> (scale * 4);
-
- if (*pos == len)
- return 1;
-
- tmp &= 0x0f;
- if (tmp > 9)
- *str = tmp + 'A' - 10;
- else
- *str = tmp + '0';
- (*pos)++;
-
- return 0;
-}
-
-static const char *ipx_ntop1(const struct ipx_addr *addr, char *str, size_t len)
-{
- int i;
- size_t pos = 0;
-
- if (len == 0)
- return str;
-
- for(i = 7; i >= 0; i--)
- if (do_digit(str + pos, ntohl(addr->ipx_net), i, &pos, len))
- return str;
-
- if (pos == len)
- return str;
-
- *(str + pos) = '.';
- pos++;
-
- for(i = 0; i < 6; i++) {
- if (do_digit(str + pos, addr->ipx_node[i], 1, &pos, len))
- return str;
- if (do_digit(str + pos, addr->ipx_node[i], 0, &pos, len))
- return str;
- }
-
- if (pos == len)
- return str;
-
- *(str + pos) = 0;
-
- return str;
-}
-
-
-const char *ipx_ntop(int af, const void *addr, char *str, size_t len)
-{
- switch(af) {
- case AF_IPX:
- errno = 0;
- return ipx_ntop1((struct ipx_addr *)addr, str, len);
- default:
- errno = EAFNOSUPPORT;
- }
-
- return NULL;
-}
diff --git a/lib/ipx_pton.c b/lib/ipx_pton.c
deleted file mode 100644
index a97c1c1bc7bf..000000000000
--- a/lib/ipx_pton.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <errno.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-
-#include "utils.h"
-
-static int ipx_getnet(u_int32_t *net, const char *str)
-{
- int i;
- u_int32_t tmp;
-
- for(i = 0; *str && (i < 8); i++) {
-
- if ((tmp = get_hex(*str)) == -1) {
- if (*str == '.')
- return 0;
- else
- return -1;
- }
-
- str++;
- (*net) <<= 4;
- (*net) |= tmp;
- }
-
- if (*str == 0)
- return 0;
-
- return -1;
-}
-
-static int ipx_getnode(u_int8_t *node, const char *str)
-{
- int i;
- u_int32_t tmp;
-
- for(i = 0; i < 6; i++) {
- if ((tmp = get_hex(*str++)) == -1)
- return -1;
- node[i] = (u_int8_t)tmp;
- node[i] <<= 4;
- if ((tmp = get_hex(*str++)) == -1)
- return -1;
- node[i] |= (u_int8_t)tmp;
- if (*str == ':')
- str++;
- }
-
- return 0;
-}
-
-static int ipx_pton1(const char *src, struct ipx_addr *addr)
-{
- char *sep = (char *)src;
- int no_node = 0;
-
- memset(addr, 0, sizeof(struct ipx_addr));
-
- while(*sep && (*sep != '.'))
- sep++;
-
- if (*sep != '.')
- no_node = 1;
-
- if (ipx_getnet(&addr->ipx_net, src))
- return 0;
-
- addr->ipx_net = htonl(addr->ipx_net);
-
- if (no_node)
- return 1;
-
- if (ipx_getnode(addr->ipx_node, sep + 1))
- return 0;
-
- return 1;
-}
-
-int ipx_pton(int af, const char *src, void *addr)
-{
- int err;
-
- switch (af) {
- case AF_IPX:
- errno = 0;
- err = ipx_pton1(src, (struct ipx_addr *)addr);
- break;
- default:
- errno = EAFNOSUPPORT;
- err = -1;
- }
-
- return err;
-}
diff --git a/lib/utils.c b/lib/utils.c
index 345630d04929..8e1261f376cf 100644
--- a/lib/utils.c
+++ b/lib/utils.c
@@ -1033,8 +1033,6 @@ const char *rt_addr_n2a_r(int af, int len,
return inet_ntop(af, addr, buf, buflen);
case AF_MPLS:
return mpls_ntop(af, addr, buf, buflen);
- case AF_IPX:
- return ipx_ntop(af, addr, buf, buflen);
case AF_DECnet:
{
struct dn_naddr dna = { 2, { 0, 0, } };
diff --git a/man/man8/ip-route.8.in b/man/man8/ip-route.8.in
index a33ce1f0f400..809dc4252bc4 100644
--- a/man/man8/ip-route.8.in
+++ b/man/man8/ip-route.8.in
@@ -107,7 +107,7 @@ replace " } "
.ti -8
.IR FAMILY " := [ "
-.BR inet " | " inet6 " | " ipx " | " dnet " | " mpls " | " bridge " | " link " ]"
+.BR inet " | " inet6 " | " dnet " | " mpls " | " bridge " | " link " ]"
.ti -8
.IR OPTIONS " := " FLAGS " [ "
diff --git a/man/man8/ip.8 b/man/man8/ip.8
index 1d358879ec39..16867efbeaf8 100644
--- a/man/man8/ip.8
+++ b/man/man8/ip.8
@@ -34,7 +34,7 @@ ip \- show / manipulate routing, network devices, interfaces and tunnels
\fB\-r\fR[\fIesolve\fR] |
\fB\-iec\fR |
\fB\-f\fR[\fIamily\fR] {
-.BR inet " | " inet6 " | " ipx " | " dnet " | " link " } | "
+.BR inet " | " inet6 " | " dnet " | " link " } | "
\fB-4\fR |
\fB-6\fR |
\fB-I\fR |
@@ -94,7 +94,7 @@ Zero (0) means loop until all addresses are removed.
.TP
.BR "\-f" , " \-family " <FAMILY>
Specifies the protocol family to use. The protocol family identifier can be one of
-.BR "inet" , " inet6" , " bridge" , " ipx" , " dnet" , " mpls"
+.BR "inet" , " inet6" , " bridge" , " dnet" , " mpls"
or
.BR link .
If this option is not present,
@@ -130,11 +130,6 @@ shortcut for
shortcut for
.BR "\-family decnet" .
-.TP
-.B \-I
-shortcut for
-.BR "\-family ipx" .
-
.TP
.B \-M
shortcut for
--
2.17.1
^ permalink raw reply related
* [PATCH iproute2] testsuite: drop old kernel configs
From: Stephen Hemminger @ 2018-11-15 19:28 UTC (permalink / raw)
To: netdev; +Cc: Stephen Hemminger, Stephen Hemminger
The testsuite directory had a directory of ancient kernel configs.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
testsuite/configs/all-2.4 | 848 -----------------
testsuite/configs/all-no-act | 1499 -----------------------------
testsuite/configs/all-police-act | 1504 ------------------------------
3 files changed, 3851 deletions(-)
delete mode 100644 testsuite/configs/all-2.4
delete mode 100644 testsuite/configs/all-no-act
delete mode 100644 testsuite/configs/all-police-act
diff --git a/testsuite/configs/all-2.4 b/testsuite/configs/all-2.4
deleted file mode 100644
index cc4131c2313f..000000000000
--- a/testsuite/configs/all-2.4
+++ /dev/null
@@ -1,848 +0,0 @@
-#
-# Automatically generated by make menuconfig: don't edit
-#
-CONFIG_X86=y
-# CONFIG_SBUS is not set
-CONFIG_UID16=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
-CONFIG_KMOD=y
-
-#
-# Processor type and features
-#
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_MPENTIUMIII is not set
-CONFIG_MPENTIUM4=y
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MELAN is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_XADD=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_POPAD_OK=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_X86_L1_CACHE_SHIFT=7
-CONFIG_X86_HAS_TSC=y
-CONFIG_X86_GOOD_APIC=y
-CONFIG_X86_PGE=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_F00F_WORKS_OK=y
-CONFIG_X86_MCE=y
-# CONFIG_TOSHIBA is not set
-# CONFIG_I8K is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_CPUID is not set
-# CONFIG_EDD is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_MTRR is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
-# CONFIG_X86_NUMA is not set
-# CONFIG_X86_TSC_DISABLE is not set
-CONFIG_X86_TSC=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# General setup
-#
-CONFIG_NET=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_PCI=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_ISA=y
-CONFIG_PCI_NAMES=y
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_HOTPLUG=y
-
-#
-# PCMCIA/CardBus support
-#
-CONFIG_PCMCIA=y
-CONFIG_CARDBUS=y
-# CONFIG_TCIC is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-# CONFIG_HOTPLUG_PCI_IBM is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
-# CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
-# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-CONFIG_BINFMT_AOUT=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-# CONFIG_OOM_KILLER is not set
-CONFIG_PM=y
-# CONFIG_APM is not set
-
-#
-# ACPI Support
-#
-# CONFIG_ACPI is not set
-CONFIG_ACPI_BOOT=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play configuration
-#
-CONFIG_PNP=y
-CONFIG_ISAPNP=y
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_CISS_MONITOR_THREAD is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_BLK_STATS is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_FILTER is not set
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_NAT=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_TOS=y
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-CONFIG_ATM=y
-CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_BR2684 is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_CSZ=y
-CONFIG_NET_SCH_HFSC=y
-CONFIG_NET_SCH_ATM=y
-CONFIG_NET_SCH_PRIO=y
-CONFIG_NET_SCH_RED=y
-CONFIG_NET_SCH_SFQ=y
-CONFIG_NET_SCH_TEQL=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_NET_SCH_GRED=y
-CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_SCH_DSMARK=y
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=y
-CONFIG_NET_CLS_U32=y
-CONFIG_NET_CLS_RSVP=y
-CONFIG_NET_CLS_RSVP6=y
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-# CONFIG_PHONE_IXJ is not set
-# CONFIG_PHONE_IXJ_PCMCIA is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_BLK_DEV_CMD640=y
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_BLK_DEV_GENERIC is not set
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_PCI_WIP is not set
-# CONFIG_BLK_DEV_ADMA100 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_WDC_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_AMD74XX_OVERRIDE is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_HPT34X_AUTODMA is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-CONFIG_BLK_DEV_PIIX=y
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_PDC202XX_BURST is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-CONFIG_BLK_DEV_RZ1000=y
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_DMA_NONPCI is not set
-# CONFIG_BLK_DEV_ATARAID is not set
-# CONFIG_BLK_DEV_ATARAID_PDC is not set
-# CONFIG_BLK_DEV_ATARAID_HPT is not set
-# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
-# CONFIG_BLK_DEV_ATARAID_SII is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_BOOT is not set
-# CONFIG_FUSION_ISENSE is not set
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LAN is not set
-
-#
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_TULIP is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_DGRS is not set
-# CONFIG_DM9102 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_LNE390 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_NE3210 is not set
-# CONFIG_ES3210 is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNDANCE_MMIO is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_SERIAL=y
-# CONFIG_SERIAL_CONSOLE is not set
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-CONFIG_MOUSE=y
-CONFIG_PSMOUSE=y
-# CONFIG_82C710_MOUSE is not set
-# CONFIG_PC110_PAD is not set
-# CONFIG_MK712_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-# CONFIG_QIC02_TAPE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPMI_PANIC_EVENT is not set
-# CONFIG_IPMI_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_KCS is not set
-# CONFIG_IPMI_WATCHDOG is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_SCx200 is not set
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_AMD_RNG is not set
-# CONFIG_INTEL_RNG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_AMD_PM768 is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_SONYPI is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-
-#
-# Direct Rendering Manager (XFree86 DRI support)
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_PCMCIA_SERIAL_CS is not set
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_MWAVE is not set
-# CONFIG_OBMOUSE is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_QFMT_V2 is not set
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BEFS_DEBUG is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_TRACE is not set
-# CONFIG_XFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_SUNRPC=y
-CONFIG_LOCKD=y
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SMB_NLS is not set
-# CONFIG_NLS is not set
-
-#
-# Console drivers
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VIDEO_SELECT is not set
-# CONFIG_MDA_CONSOLE is not set
-
-#
-# Frame-buffer support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-CONFIG_SOUND_EMU10K1=y
-CONFIG_MIDI_EMU10K1=y
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
-# CONFIG_MIDI_VIA82CXXX is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-# CONFIG_SOUND_WM97XX is not set
-
-#
-# USB support
-#
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_UHCI_ALT=y
-# CONFIG_USB_OHCI is not set
-# CONFIG_USB_SL811HS_ALT is not set
-# CONFIG_USB_SL811HS is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_BLUETOOTH is not set
-# CONFIG_USB_MIDI is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_HID is not set
-# CONFIG_USB_HIDINPUT is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_DC2XX is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDCETHER is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_BRLVGER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-
-#
-# Support for USB gadgets
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BLUEZ is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_DEBUG_HIGHMEM=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_IOVIRT=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_FRAME_POINTER=y
-CONFIG_LOG_BUF_SHIFT=0
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_ZLIB_INFLATE is not set
-# CONFIG_ZLIB_DEFLATE is not set
-# CONFIG_FW_LOADER is not set
diff --git a/testsuite/configs/all-no-act b/testsuite/configs/all-no-act
deleted file mode 100644
index baeed437e6a2..000000000000
--- a/testsuite/configs/all-no-act
+++ /dev/null
@@ -1,1499 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc2-bk13
-# Wed Dec 8 14:43:07 2004
-#
-CONFIG_X86=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION="no-act"
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Processor type and features
-#
-CONFIG_X86_PC=y
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
-# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-CONFIG_MPENTIUM4=y
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_X86_GENERIC is not set
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_XADD=y
-CONFIG_X86_L1_CACHE_SHIFT=7
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_POPAD_OK=y
-CONFIG_X86_GOOD_APIC=y
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-# CONFIG_HPET_TIMER is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=8
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT=y
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_TSC=y
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_NONFATAL=y
-# CONFIG_X86_MCE_P4THERMAL is not set
-# CONFIG_TOSHIBA is not set
-# CONFIG_I8K is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_CPUID is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_EDD is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MTRR=y
-# CONFIG_EFI is not set
-CONFIG_IRQBALANCE=y
-CONFIG_HAVE_DEC_LOCK=y
-# CONFIG_REGPARM is not set
-
-#
-# Power management options (ACPI, APM)
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_SOFTWARE_SUSPEND=y
-CONFIG_PM_STD_PARTITION=""
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
-CONFIG_ACPI=y
-CONFIG_ACPI_BOOT=y
-CONFIG_ACPI_INTERPRETER=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_SLEEP_PROC_FS=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BUTTON=y
-CONFIG_ACPI_VIDEO=y
-CONFIG_ACPI_FAN=y
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_THERMAL=y
-# CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_IBM is not set
-# CONFIG_ACPI_TOSHIBA is not set
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_PCI=y
-CONFIG_ACPI_SYSTEM=y
-# CONFIG_X86_PM_TIMER is not set
-
-#
-# APM (Advanced Power Management) BIOS Support
-#
-# CONFIG_APM is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-CONFIG_PCI=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-# CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_MMCONFIG=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-CONFIG_ISA=y
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-# CONFIG_SCx200 is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_BINFMT_MISC=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-# CONFIG_ISAPNP is not set
-# CONFIG_PNPBIOS is not set
-CONFIG_PNPACPI=y
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_LBD=y
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_CMD640=y
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-CONFIG_BLK_DEV_SIS5513=y
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-CONFIG_I2O=y
-CONFIG_I2O_CONFIG=y
-CONFIG_I2O_BLOCK=y
-# CONFIG_I2O_SCSI is not set
-CONFIG_I2O_PROC=y
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_IPV6_TUNNEL=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=y
-CONFIG_IP_NF_TFTP=y
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_QUEUE=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=y
-CONFIG_IP_NF_MATCH_IPRANGE=y
-CONFIG_IP_NF_MATCH_MAC=y
-CONFIG_IP_NF_MATCH_PKTTYPE=y
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=y
-CONFIG_IP_NF_MATCH_RECENT=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_DSCP=y
-CONFIG_IP_NF_MATCH_AH_ESP=y
-CONFIG_IP_NF_MATCH_LENGTH=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_MATCH_TCPMSS=y
-CONFIG_IP_NF_MATCH_HELPER=y
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=y
-CONFIG_IP_NF_MATCH_OWNER=y
-CONFIG_IP_NF_MATCH_PHYSDEV=y
-CONFIG_IP_NF_MATCH_ADDRTYPE=y
-CONFIG_IP_NF_MATCH_REALM=y
-# CONFIG_IP_NF_MATCH_SCTP is not set
-CONFIG_IP_NF_MATCH_COMMENT=y
-CONFIG_IP_NF_MATCH_CONNMARK=y
-CONFIG_IP_NF_MATCH_HASHLIMIT=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_IP_NF_TARGET_ULOG=y
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_SAME=y
-# CONFIG_IP_NF_NAT_LOCAL is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=y
-CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP_NF_TARGET_DSCP=y
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_CLASSIFY=y
-CONFIG_IP_NF_TARGET_CONNMARK=y
-CONFIG_IP_NF_TARGET_CLUSTERIP=y
-CONFIG_IP_NF_RAW=y
-CONFIG_IP_NF_TARGET_NOTRACK=y
-CONFIG_IP_NF_ARPTABLES=y
-CONFIG_IP_NF_ARPFILTER=y
-CONFIG_IP_NF_ARP_MANGLE=y
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_MATCH_LIMIT=y
-CONFIG_IP6_NF_MATCH_MAC=y
-CONFIG_IP6_NF_MATCH_RT=y
-CONFIG_IP6_NF_MATCH_OPTS=y
-CONFIG_IP6_NF_MATCH_FRAG=y
-CONFIG_IP6_NF_MATCH_HL=y
-CONFIG_IP6_NF_MATCH_MULTIPORT=y
-CONFIG_IP6_NF_MATCH_OWNER=y
-CONFIG_IP6_NF_MATCH_MARK=y
-CONFIG_IP6_NF_MATCH_IPV6HEADER=y
-CONFIG_IP6_NF_MATCH_AHESP=y
-CONFIG_IP6_NF_MATCH_LENGTH=y
-CONFIG_IP6_NF_MATCH_EUI64=y
-CONFIG_IP6_NF_MATCH_PHYSDEV=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_TARGET_LOG=y
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_TARGET_MARK=y
-CONFIG_IP6_NF_RAW=y
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-CONFIG_ATM=y
-# CONFIG_ATM_CLIP is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_BR2684 is not set
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-CONFIG_LLC2=y
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_HFSC=y
-CONFIG_NET_SCH_ATM=y
-CONFIG_NET_SCH_PRIO=y
-CONFIG_NET_SCH_RED=y
-CONFIG_NET_SCH_SFQ=y
-CONFIG_NET_SCH_TEQL=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_NET_SCH_GRED=y
-CONFIG_NET_SCH_DSMARK=y
-CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_SCH_INGRESS=y
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=y
-CONFIG_NET_CLS_U32=y
-CONFIG_NET_CLS_EGP=y
-CONFIG_EGP_DEBUG=y
-CONFIG_NET_CLS_EGP_SIMPLE_CMP=y
-CONFIG_NET_CLS_EGP_NBYTE=y
-CONFIG_NET_CLS_EGP_KMP=y
-CONFIG_NET_CLS_EGP_REGEXP=y
-CONFIG_NET_CLS_EGP_CMD=y
-CONFIG_EGP_CMD_BACK_TTL=4096
-CONFIG_CLS_U32_PERF=y
-CONFIG_NET_CLS_IND=y
-CONFIG_NET_CLS_RSVP=y
-CONFIG_NET_CLS_RSVP6=y
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=y
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=y
-# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOATM is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-CONFIG_SHAPER=y
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-# CONFIG_SERIAL_8250_ACPI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_SONYPI is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_MWAVE is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HPET is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-CONFIG_I2C_SIS96X=y
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=y
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-# CONFIG_IBM_ASM is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-# CONFIG_VIDEO_SELECT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ISA devices
-#
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4232 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_WAVEFRONT is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SSCAPE is not set
-
-#
-# PCI devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-CONFIG_SND_EMU10K1=y
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VX222 is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_OHCI_HCD is not set
-CONFIG_USB_UHCI_HCD=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-CONFIG_USB_EGALAX=m
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGETKIT is not set
-CONFIG_USB_PHIDGETSERVO=m
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_4KSTACKS is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
-CONFIG_X86_MPPARSE=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_CAPABILITIES=m
-CONFIG_SECURITY_ROOTPLUG=m
-# CONFIG_SECURITY_SECLVL is not set
-CONFIG_SECURITY_SELINUX=y
-# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-# CONFIG_SECURITY_SELINUX_MLS is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_AES_586=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_KHAZAD=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_TEST=y
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_X86_SMP=y
-CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
-CONFIG_X86_TRAMPOLINE=y
-CONFIG_PC=y
diff --git a/testsuite/configs/all-police-act b/testsuite/configs/all-police-act
deleted file mode 100644
index 1c842825d19c..000000000000
--- a/testsuite/configs/all-police-act
+++ /dev/null
@@ -1,1504 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc2-bk13
-# Wed Dec 8 14:19:17 2004
-#
-CONFIG_X86=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Processor type and features
-#
-CONFIG_X86_PC=y
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
-# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-CONFIG_MPENTIUM4=y
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_X86_GENERIC is not set
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_XADD=y
-CONFIG_X86_L1_CACHE_SHIFT=7
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_POPAD_OK=y
-CONFIG_X86_GOOD_APIC=y
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-# CONFIG_HPET_TIMER is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=8
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT=y
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_TSC=y
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_NONFATAL=y
-# CONFIG_X86_MCE_P4THERMAL is not set
-# CONFIG_TOSHIBA is not set
-# CONFIG_I8K is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_CPUID is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_EDD is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MTRR=y
-# CONFIG_EFI is not set
-CONFIG_IRQBALANCE=y
-CONFIG_HAVE_DEC_LOCK=y
-# CONFIG_REGPARM is not set
-
-#
-# Power management options (ACPI, APM)
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_SOFTWARE_SUSPEND=y
-CONFIG_PM_STD_PARTITION=""
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
-CONFIG_ACPI=y
-CONFIG_ACPI_BOOT=y
-CONFIG_ACPI_INTERPRETER=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_SLEEP_PROC_FS=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BUTTON=y
-CONFIG_ACPI_VIDEO=y
-CONFIG_ACPI_FAN=y
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_THERMAL=y
-# CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_IBM is not set
-# CONFIG_ACPI_TOSHIBA is not set
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_PCI=y
-CONFIG_ACPI_SYSTEM=y
-# CONFIG_X86_PM_TIMER is not set
-
-#
-# APM (Advanced Power Management) BIOS Support
-#
-# CONFIG_APM is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-CONFIG_PCI=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-# CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_MMCONFIG=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-CONFIG_ISA=y
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-# CONFIG_SCx200 is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_BINFMT_MISC=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-# CONFIG_ISAPNP is not set
-# CONFIG_PNPBIOS is not set
-CONFIG_PNPACPI=y
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_LBD=y
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_CMD640=y
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-CONFIG_BLK_DEV_SIS5513=y
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-CONFIG_I2O=y
-CONFIG_I2O_CONFIG=y
-CONFIG_I2O_BLOCK=y
-# CONFIG_I2O_SCSI is not set
-CONFIG_I2O_PROC=y
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_IPV6_TUNNEL=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=y
-CONFIG_IP_NF_TFTP=y
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_QUEUE=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=y
-CONFIG_IP_NF_MATCH_IPRANGE=y
-CONFIG_IP_NF_MATCH_MAC=y
-CONFIG_IP_NF_MATCH_PKTTYPE=y
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=y
-CONFIG_IP_NF_MATCH_RECENT=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_DSCP=y
-CONFIG_IP_NF_MATCH_AH_ESP=y
-CONFIG_IP_NF_MATCH_LENGTH=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_MATCH_TCPMSS=y
-CONFIG_IP_NF_MATCH_HELPER=y
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=y
-CONFIG_IP_NF_MATCH_OWNER=y
-CONFIG_IP_NF_MATCH_PHYSDEV=y
-CONFIG_IP_NF_MATCH_ADDRTYPE=y
-CONFIG_IP_NF_MATCH_REALM=y
-# CONFIG_IP_NF_MATCH_SCTP is not set
-CONFIG_IP_NF_MATCH_COMMENT=y
-CONFIG_IP_NF_MATCH_CONNMARK=y
-CONFIG_IP_NF_MATCH_HASHLIMIT=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_IP_NF_TARGET_ULOG=y
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_SAME=y
-# CONFIG_IP_NF_NAT_LOCAL is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=y
-CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP_NF_TARGET_DSCP=y
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_CLASSIFY=y
-CONFIG_IP_NF_TARGET_CONNMARK=y
-CONFIG_IP_NF_TARGET_CLUSTERIP=y
-CONFIG_IP_NF_RAW=y
-CONFIG_IP_NF_TARGET_NOTRACK=y
-CONFIG_IP_NF_ARPTABLES=y
-CONFIG_IP_NF_ARPFILTER=y
-CONFIG_IP_NF_ARP_MANGLE=y
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_MATCH_LIMIT=y
-CONFIG_IP6_NF_MATCH_MAC=y
-CONFIG_IP6_NF_MATCH_RT=y
-CONFIG_IP6_NF_MATCH_OPTS=y
-CONFIG_IP6_NF_MATCH_FRAG=y
-CONFIG_IP6_NF_MATCH_HL=y
-CONFIG_IP6_NF_MATCH_MULTIPORT=y
-CONFIG_IP6_NF_MATCH_OWNER=y
-CONFIG_IP6_NF_MATCH_MARK=y
-CONFIG_IP6_NF_MATCH_IPV6HEADER=y
-CONFIG_IP6_NF_MATCH_AHESP=y
-CONFIG_IP6_NF_MATCH_LENGTH=y
-CONFIG_IP6_NF_MATCH_EUI64=y
-CONFIG_IP6_NF_MATCH_PHYSDEV=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_TARGET_LOG=y
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_TARGET_MARK=y
-CONFIG_IP6_NF_RAW=y
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-CONFIG_ATM=y
-# CONFIG_ATM_CLIP is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_BR2684 is not set
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-CONFIG_LLC2=y
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_HFSC=y
-CONFIG_NET_SCH_ATM=y
-CONFIG_NET_SCH_PRIO=y
-CONFIG_NET_SCH_RED=y
-CONFIG_NET_SCH_SFQ=y
-CONFIG_NET_SCH_TEQL=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_NET_SCH_GRED=y
-CONFIG_NET_SCH_DSMARK=y
-CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_SCH_INGRESS=y
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=y
-CONFIG_NET_CLS_U32=y
-CONFIG_NET_CLS_EGP=y
-CONFIG_EGP_DEBUG=y
-CONFIG_NET_CLS_EGP_SIMPLE_CMP=y
-CONFIG_NET_CLS_EGP_NBYTE=y
-CONFIG_NET_CLS_EGP_KMP=y
-CONFIG_NET_CLS_EGP_REGEXP=y
-CONFIG_NET_CLS_EGP_CMD=y
-CONFIG_EGP_CMD_BACK_TTL=4096
-CONFIG_CLS_U32_PERF=y
-CONFIG_NET_CLS_IND=y
-CONFIG_NET_CLS_RSVP=y
-CONFIG_NET_CLS_RSVP6=y
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=y
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=y
-CONFIG_NET_ACT_IPT=y
-CONFIG_NET_ACT_PEDIT=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=y
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=y
-# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOATM is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-CONFIG_SHAPER=y
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-# CONFIG_SERIAL_8250_ACPI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_SONYPI is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_MWAVE is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HPET is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-CONFIG_I2C_SIS96X=y
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=y
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-# CONFIG_IBM_ASM is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-# CONFIG_VIDEO_SELECT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ISA devices
-#
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4232 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_WAVEFRONT is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SSCAPE is not set
-
-#
-# PCI devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-CONFIG_SND_EMU10K1=y
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VX222 is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_OHCI_HCD is not set
-CONFIG_USB_UHCI_HCD=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-CONFIG_USB_EGALAX=m
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGETKIT is not set
-CONFIG_USB_PHIDGETSERVO=m
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_4KSTACKS is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
-CONFIG_X86_MPPARSE=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_CAPABILITIES=m
-CONFIG_SECURITY_ROOTPLUG=m
-# CONFIG_SECURITY_SECLVL is not set
-CONFIG_SECURITY_SELINUX=y
-# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-# CONFIG_SECURITY_SELINUX_MLS is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_AES_586=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_KHAZAD=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_TEST=y
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_X86_SMP=y
-CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
-CONFIG_X86_TRAMPOLINE=y
-CONFIG_PC=y
--
2.17.1
^ permalink raw reply related
* Re: [PATCHv2 net-net] net: dsa: mv88e6xxx: Work around mv886e6161 SERDES missing MII_PHYSID2
From: David Miller @ 2018-11-15 19:30 UTC (permalink / raw)
To: andrew; +Cc: netdev, sergei.shtylyov
In-Reply-To: <1542045061-8137-1-git-send-email-andrew@lunn.ch>
From: Andrew Lunn <andrew@lunn.ch>
Date: Mon, 12 Nov 2018 18:51:01 +0100
> We already have a workaround for a couple of switches whose internal
> PHYs only have the Marvel OUI, but no model number. We detect such
> PHYs and give them the 6390 ID as the model number. However the
> mv88e6161 has two SERDES interfaces in the same address range as its
> internal PHYs. These suffer from the same problem, the Marvell OUI,
> but no model number. As a result, these SERDES interfaces were getting
> the same PHY ID as the mv88e6390, even though they are not PHYs, and
> the Marvell PHY driver was trying to drive them.
>
> Add a special case to stop this from happen.
>
> Reported-by: Chris Healy <Chris.Healy@zii.aero>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Applied to net-next.
^ permalink raw reply
* Re: [Patch net-next v2] net: dump more useful information in netdev_rx_csum_fault()
From: David Miller @ 2018-11-15 19:37 UTC (permalink / raw)
To: xiyou.wangcong; +Cc: netdev
In-Reply-To: <20181112224718.19496-1-xiyou.wangcong@gmail.com>
From: Cong Wang <xiyou.wangcong@gmail.com>
Date: Mon, 12 Nov 2018 14:47:18 -0800
> Currently netdev_rx_csum_fault() only shows a device name,
> we need more information about the skb for debugging csum
> failures.
>
> Sample output:
>
> ens3: hw csum failure
> dev features: 0x0000000000014b89
> skb len=84 data_len=0 pkt_type=0 gso_size=0 gso_type=0 nr_frags=0 ip_summed=0 csum=0 csum_complete_sw=0 csum_valid=0 csum_level=0
>
> Note, I use pr_err() just to be consistent with the existing one.
>
> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Applied, thanks Cong.
^ permalink raw reply
* Re: [net-next PATCH v4] net: sched: cls_flower: Classify packets using port ranges
From: David Miller @ 2018-11-15 19:39 UTC (permalink / raw)
To: amritha.nambiar
Cc: netdev, jakub.kicinski, sridhar.samudrala, jhs, xiyou.wangcong,
jiri
In-Reply-To: <154206815495.59255.14351684061368900906.stgit@anamhost.jf.intel.com>
From: Amritha Nambiar <amritha.nambiar@intel.com>
Date: Mon, 12 Nov 2018 16:15:55 -0800
> Added support in tc flower for filtering based on port ranges.
>
> Example:
...
> v4:
> 1. Added condition before setting port key.
> 2. Organized setting and dumping port range keys into functions
> and added validation of input range.
>
> v3:
> 1. Moved new fields in UAPI enum to the end of enum.
> 2. Removed couple of empty lines.
>
> v2:
> Addressed Jiri's comments:
> 1. Added separate functions for dst and src comparisons.
> 2. Removed endpoint enum.
> 3. Added new bit TCA_FLOWER_FLAGS_RANGE to decide normal/range
> lookup.
> 4. Cleaned up fl_lookup function.
>
> Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Applied.
^ permalink raw reply
* Re: [PATCH net] net_sched: sch_fq: ensure maxrate fq parameter applies to EDT flows
From: David Miller @ 2018-11-15 19:42 UTC (permalink / raw)
To: edumazet; +Cc: netdev, eric.dumazet
In-Reply-To: <20181113001716.150039-1-edumazet@google.com>
From: Eric Dumazet <edumazet@google.com>
Date: Mon, 12 Nov 2018 16:17:16 -0800
> When EDT conversion happened, fq lost the ability to enfore a maxrate
> for all flows. It kept it for non EDT flows.
>
> This commit restores the functionality.
>
> Tested:
>
> tc qd replace dev eth0 root fq maxrate 500Mbit
> netperf -P0 -H host -- -O THROUGHPUT
> 489.75
>
> Fixes: ab408b6dc744 ("tcp: switch tcp and sch_fq to new earliest departure time model")
> Signed-off-by: Eric Dumazet <edumazet@google.com>
Applied, thanks Eric.
^ permalink raw reply
* Re: [PATCH] rhashtable: detect when object movement between tables might have invalidated a lookup
From: Herbert Xu @ 2018-11-16 5:55 UTC (permalink / raw)
To: NeilBrown; +Cc: David Miller, tgraf, netdev, linux-kernel, eric.dumazet
In-Reply-To: <87muqbtev6.fsf@notabene.neil.brown.name>
On Thu, Nov 15, 2018 at 10:32:13AM +1100, NeilBrown wrote:
>
> +#define RHT_NULLS_MARKER(ptr) \
> + ((void *)NULLS_MARKER(((unsigned long) (ptr)) >> 1))
> #define INIT_RHT_NULLS_HEAD(ptr) \
> - ((ptr) = (typeof(ptr)) NULLS_MARKER(0))
> + ((ptr) = RHT_NULLS_MARKER(&(ptr)))
Why are you shifting this by one?
> diff --git a/lib/rhashtable.c b/lib/rhashtable.c
> index 30526afa8343..852ffa5160f1 100644
> --- a/lib/rhashtable.c
> +++ b/lib/rhashtable.c
> @@ -1179,8 +1179,7 @@ struct rhash_head __rcu **rht_bucket_nested(const struct bucket_table *tbl,
> unsigned int hash)
> {
> const unsigned int shift = PAGE_SHIFT - ilog2(sizeof(void *));
> - static struct rhash_head __rcu *rhnull =
> - (struct rhash_head __rcu *)NULLS_MARKER(0);
> + static struct rhash_head __rcu *rhnull;
I don't understand why you can't continue to do NULLS_MARKER(0) or
RHT_NULLS_MARKER(0).
Cheers,
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply
* Re: [PATCH net] ipv6: fix a dst leak when removing its exception
From: David Ahern @ 2018-11-15 19:49 UTC (permalink / raw)
To: Xin Long, network dev; +Cc: David Miller, Mika Penttilä
In-Reply-To: <b031b44110fcb06d780ed60ecadfa4e8bc39acfb.1542127708.git.lucien.xin@gmail.com>
On 11/13/18 8:48 AM, Xin Long wrote:
> These is no need to hold dst before calling rt6_remove_exception_rt().
> The call to dst_hold_safe() in ip6_link_failure() was for ip6_del_rt(),
> which has been removed in Commit 93531c674315 ("net/ipv6: separate
> handling of FIB entries from dst based routes"). Otherwise, it will
> cause a dst leak.
>
> This patch is to simply remove the dst_hold_safe() call before calling
> rt6_remove_exception_rt() and also do the same in ip6_del_cached_rt().
> It's safe, because the removal of the exception that holds its dst's
> refcnt is protected by rt6_exception_lock.
>
> Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes")
> Fixes: 23fb93a4d3f1 ("net/ipv6: Cleanup exception and cache route handling")
> Reported-by: Li Shuang <shuali@redhat.com>
> Signed-off-by: Xin Long <lucien.xin@gmail.com>
> ---
> net/ipv6/route.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
Ok, I see now. commit ad65a2f05695 add the dst_hold_safe with
ip6_del_rt. ip6_del_rt called ip6_rt_put to release the reference taken
by the hold_safe. Those paths are gone now.
Reviewed-by: David Ahern <dsahern@gmail.com>
^ permalink raw reply
* DSA support for Marvell 88e6065 switch
From: Pavel Machek @ 2018-11-15 19:51 UTC (permalink / raw)
To: andrew, vivien.didelot, netdev, f.fainelli; +Cc: buytenh, buytenh, nico
[-- Attachment #1: Type: text/plain, Size: 472 bytes --]
Hi!
I'm trying to create support for Marvell 88e6065 switch... and it
seems like drivers/net/dsa supports everything, but this model.
Did someone work with this hardware before? Any idea if it would be
more suitable to support by existing 88e6060 code, or if 88e6xxx code
should serve as a base?
Thanks,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply
* [RFC] DTrace based on eBPF and other tracing facilities
From: Kris Van Hees @ 2018-11-16 6:02 UTC (permalink / raw)
To: linux-kernel, netdev
A lot of work has been done on various aspects of the tracing infrastructure
in Linux in the past years and with the further development of BPF a quite
powerful execution engine has become available as well.
One of the difficulties we have experienced in furthering DTrace on Linux is
that we have to duplicate functionality already available in the kernel
because that functionality is not easy to make use of.
In the past year or so we have been working towards changing that. There is
no point in having multiple projects reinvent the same wheel a couple of times
over, especially when there are ways where everyone can benefit from actually
cooperating. Our current (lofty) goal is to rework the DTrace implementation
that we currently have to make it more modular and less self-sufficient. We
are envisioning a future for DTrace where we can leverage its strengths in the
areas where it matters most (e.g. very efficient handling of large amounts of
kernel probes, well defined and understood D language, user familiarity with
existing providers, ...) while building on the existing tracing infrastructure
in Linux. That also means that we can contribute better to existing pieces
in the infrastructure and work together with other tracing projects to continue
to improve tracing on Linux.
Ideally we would like to see an infrastructure where any tracers can attach
actions to any kind of probe source, and have data generated according to the
actions the tracer associated with the probe source when a specific probe
fires. The execution of those actions would be done using BPF.
We believe that this proposal would be a benefit to all because it allows us
to pool resources in the areas that really need it. E.g. if we all depend on
BPF as execution engine we invariably work together to make it as solid as can
be.
Obviously we cannot do this work on our own, and we cannot do it behind closed
doors. We've created a github repository for the kernel with DTrace added in
at:
https://github.com/ezannoni/dtrace-linux-kernel/tree/master
We also have a branch there with the most recent BPF-based work:
https://github.com/ezannoni/dtrace-linux-kernel/tree/nix/bpf/4.19/helpers
Since most (if not all) tracing tools have similar requirements for what may
need to be done when a probe fires, we really want to join forces.
Cheers,
Kris
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox