From: Tim Harvey <tharvey@gateworks.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 02/14] imx: ventana: do not iomux UART1
Date: Mon, 4 Feb 2019 13:10:48 -0800 [thread overview]
Message-ID: <20190204211100.11004-3-tharvey@gateworks.com> (raw)
In-Reply-To: <20190204211100.11004-1-tharvey@gateworks.com>
The only UART that is garunteed on Ventana boards is UART2 (serial-console).
Remove UART1 pinmux as that it is not consistent across all Ventana boards
and U-Boot doesn't need it.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
board/gateworks/gw_ventana/common.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
index 41fe8dc240..f577bdbdfb 100644
--- a/board/gateworks/gw_ventana/common.c
+++ b/board/gateworks/gw_ventana/common.c
@@ -18,12 +18,6 @@
#include "common.h"
-/* UART1: Function varies per baseboard */
-static iomux_v3_cfg_t const uart1_pads[] = {
- IOMUX_PADS(PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-};
-
/* UART2: Serial Console */
static iomux_v3_cfg_t const uart2_pads[] = {
IOMUX_PADS(PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
@@ -32,7 +26,6 @@ static iomux_v3_cfg_t const uart2_pads[] = {
void setup_iomux_uart(void)
{
- SETUP_IOMUX_PADS(uart1_pads);
SETUP_IOMUX_PADS(uart2_pads);
}
--
2.17.1
next prev parent reply other threads:[~2019-02-04 21:10 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-04 21:10 [U-Boot] [PATCH 00/14] Gateworks Ventana updates Tim Harvey
2019-02-04 21:10 ` [U-Boot] [PATCH 01/14] imx: ventana: mv88e61xx change LED configuration Tim Harvey
2019-02-16 10:26 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-04 21:10 ` Tim Harvey [this message]
2019-02-16 10:35 ` [U-Boot] [U-Boot,02/14] imx: ventana: do not iomux UART1 sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 03/14] imx: ventana: remove setup of I2C3 from SPL Tim Harvey
2019-02-16 10:35 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 04/14] imx: ventana: add support for GW5905 Tim Harvey
2019-02-16 10:35 ` [U-Boot] [U-Boot,04/14] " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 05/14] imx: ventana: add support for Z101WX01 LVDS display Tim Harvey
2019-02-16 10:26 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 06/14] imx: ventana: skip nand init for nandless boards Tim Harvey
2019-02-16 10:26 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 07/14] imx: ventana: add i2c detect for all LVDS displays Tim Harvey
2019-02-16 10:26 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 08/14] imx: ventana: add support for GW5906 Tim Harvey
2019-02-16 10:26 ` [U-Boot] [U-Boot,08/14] " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 09/14] imx: ventana: add support for GW5907 Tim Harvey
2019-02-16 10:45 ` [U-Boot] [U-Boot,09/14] " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 10/14] imx: ventana: add support for GW5908 Tim Harvey
2019-02-16 10:26 ` [U-Boot] [U-Boot,10/14] " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 11/14] imx: ventana: add support for GW5909 Tim Harvey
2019-02-16 10:35 ` [U-Boot] [U-Boot,11/14] " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 12/14] imx: ventana: add support for GW5901/GW5902 Tim Harvey
2019-02-16 10:35 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 13/14] imx: ventana: gw5904/gw5909: disable RS485 Tim Harvey
2019-02-16 10:35 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-04 21:11 ` [U-Boot] [PATCH 14/14] imx: ventana: fix usage of dt paths with leading 0s (Linux 4.15+) Tim Harvey
2019-02-16 10:26 ` [U-Boot] [U-Boot, " sbabic at denx.de
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190204211100.11004-3-tharvey@gateworks.com \
--to=tharvey@gateworks.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox